|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /* | 
|  | * Copyright(C) 2015-2018 Linaro Limited. | 
|  | * | 
|  | * Author: Tor Jeremiassen <tor@ti.com> | 
|  | * Author: Mathieu Poirier <mathieu.poirier@linaro.org> | 
|  | */ | 
|  |  | 
|  | #include <linux/err.h> | 
|  | #include <linux/list.h> | 
|  | #include <linux/zalloc.h> | 
|  | #include <stdlib.h> | 
|  | #include <opencsd/c_api/opencsd_c_api.h> | 
|  | #include <opencsd/etmv4/trc_pkt_types_etmv4.h> | 
|  | #include <opencsd/ocsd_if_types.h> | 
|  |  | 
|  | #include "cs-etm.h" | 
|  | #include "cs-etm-decoder.h" | 
|  | #include "intlist.h" | 
|  |  | 
|  | /* use raw logging */ | 
|  | #ifdef CS_DEBUG_RAW | 
|  | #define CS_LOG_RAW_FRAMES | 
|  | #ifdef CS_RAW_PACKED | 
|  | #define CS_RAW_DEBUG_FLAGS (OCSD_DFRMTR_UNPACKED_RAW_OUT | \ | 
|  | OCSD_DFRMTR_PACKED_RAW_OUT) | 
|  | #else | 
|  | #define CS_RAW_DEBUG_FLAGS (OCSD_DFRMTR_UNPACKED_RAW_OUT) | 
|  | #endif | 
|  | #endif | 
|  |  | 
|  | struct cs_etm_decoder { | 
|  | void *data; | 
|  | void (*packet_printer)(const char *msg); | 
|  | dcd_tree_handle_t dcd_tree; | 
|  | cs_etm_mem_cb_type mem_access; | 
|  | ocsd_datapath_resp_t prev_return; | 
|  | }; | 
|  |  | 
|  | static u32 | 
|  | cs_etm_decoder__mem_access(const void *context, | 
|  | const ocsd_vaddr_t address, | 
|  | const ocsd_mem_space_acc_t mem_space __maybe_unused, | 
|  | const u8 trace_chan_id, | 
|  | const u32 req_size, | 
|  | u8 *buffer) | 
|  | { | 
|  | struct cs_etm_decoder *decoder = (struct cs_etm_decoder *) context; | 
|  |  | 
|  | return decoder->mem_access(decoder->data, trace_chan_id, | 
|  | address, req_size, buffer); | 
|  | } | 
|  |  | 
|  | int cs_etm_decoder__add_mem_access_cb(struct cs_etm_decoder *decoder, | 
|  | u64 start, u64 end, | 
|  | cs_etm_mem_cb_type cb_func) | 
|  | { | 
|  | decoder->mem_access = cb_func; | 
|  |  | 
|  | if (ocsd_dt_add_callback_trcid_mem_acc(decoder->dcd_tree, start, end, | 
|  | OCSD_MEM_SPACE_ANY, | 
|  | cs_etm_decoder__mem_access, | 
|  | decoder)) | 
|  | return -1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int cs_etm_decoder__reset(struct cs_etm_decoder *decoder) | 
|  | { | 
|  | ocsd_datapath_resp_t dp_ret; | 
|  |  | 
|  | decoder->prev_return = OCSD_RESP_CONT; | 
|  |  | 
|  | dp_ret = ocsd_dt_process_data(decoder->dcd_tree, OCSD_OP_RESET, | 
|  | 0, 0, NULL, NULL); | 
|  | if (OCSD_DATA_RESP_IS_FATAL(dp_ret)) | 
|  | return -1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int cs_etm_decoder__get_packet(struct cs_etm_packet_queue *packet_queue, | 
|  | struct cs_etm_packet *packet) | 
|  | { | 
|  | if (!packet_queue || !packet) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* Nothing to do, might as well just return */ | 
|  | if (packet_queue->packet_count == 0) | 
|  | return 0; | 
|  | /* | 
|  | * The queueing process in function cs_etm_decoder__buffer_packet() | 
|  | * increments the tail *before* using it.  This is somewhat counter | 
|  | * intuitive but it has the advantage of centralizing tail management | 
|  | * at a single location.  Because of that we need to follow the same | 
|  | * heuristic with the head, i.e we increment it before using its | 
|  | * value.  Otherwise the first element of the packet queue is not | 
|  | * used. | 
|  | */ | 
|  | packet_queue->head = (packet_queue->head + 1) & | 
|  | (CS_ETM_PACKET_MAX_BUFFER - 1); | 
|  |  | 
|  | *packet = packet_queue->packet_buffer[packet_queue->head]; | 
|  |  | 
|  | packet_queue->packet_count--; | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static int cs_etm_decoder__gen_etmv3_config(struct cs_etm_trace_params *params, | 
|  | ocsd_etmv3_cfg *config) | 
|  | { | 
|  | config->reg_idr = params->etmv3.reg_idr; | 
|  | config->reg_ctrl = params->etmv3.reg_ctrl; | 
|  | config->reg_ccer = params->etmv3.reg_ccer; | 
|  | config->reg_trc_id = params->etmv3.reg_trc_id; | 
|  | config->arch_ver = ARCH_V7; | 
|  | config->core_prof = profile_CortexA; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void cs_etm_decoder__gen_etmv4_config(struct cs_etm_trace_params *params, | 
|  | ocsd_etmv4_cfg *config) | 
|  | { | 
|  | config->reg_configr = params->etmv4.reg_configr; | 
|  | config->reg_traceidr = params->etmv4.reg_traceidr; | 
|  | config->reg_idr0 = params->etmv4.reg_idr0; | 
|  | config->reg_idr1 = params->etmv4.reg_idr1; | 
|  | config->reg_idr2 = params->etmv4.reg_idr2; | 
|  | config->reg_idr8 = params->etmv4.reg_idr8; | 
|  | config->reg_idr9 = 0; | 
|  | config->reg_idr10 = 0; | 
|  | config->reg_idr11 = 0; | 
|  | config->reg_idr12 = 0; | 
|  | config->reg_idr13 = 0; | 
|  | config->arch_ver = ARCH_V8; | 
|  | config->core_prof = profile_CortexA; | 
|  | } | 
|  |  | 
|  | static void cs_etm_decoder__print_str_cb(const void *p_context, | 
|  | const char *msg, | 
|  | const int str_len) | 
|  | { | 
|  | if (p_context && str_len) | 
|  | ((struct cs_etm_decoder *)p_context)->packet_printer(msg); | 
|  | } | 
|  |  | 
|  | static int | 
|  | cs_etm_decoder__init_def_logger_printing(struct cs_etm_decoder_params *d_params, | 
|  | struct cs_etm_decoder *decoder) | 
|  | { | 
|  | int ret = 0; | 
|  |  | 
|  | if (d_params->packet_printer == NULL) | 
|  | return -1; | 
|  |  | 
|  | decoder->packet_printer = d_params->packet_printer; | 
|  |  | 
|  | /* | 
|  | * Set up a library default logger to process any printers | 
|  | * (packet/raw frame) we add later. | 
|  | */ | 
|  | ret = ocsd_def_errlog_init(OCSD_ERR_SEV_ERROR, 1); | 
|  | if (ret != 0) | 
|  | return -1; | 
|  |  | 
|  | /* no stdout / err / file output */ | 
|  | ret = ocsd_def_errlog_config_output(C_API_MSGLOGOUT_FLG_NONE, NULL); | 
|  | if (ret != 0) | 
|  | return -1; | 
|  |  | 
|  | /* | 
|  | * Set the string CB for the default logger, passes strings to | 
|  | * perf print logger. | 
|  | */ | 
|  | ret = ocsd_def_errlog_set_strprint_cb(decoder->dcd_tree, | 
|  | (void *)decoder, | 
|  | cs_etm_decoder__print_str_cb); | 
|  | if (ret != 0) | 
|  | ret = -1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CS_LOG_RAW_FRAMES | 
|  | static void | 
|  | cs_etm_decoder__init_raw_frame_logging(struct cs_etm_decoder_params *d_params, | 
|  | struct cs_etm_decoder *decoder) | 
|  | { | 
|  | /* Only log these during a --dump operation */ | 
|  | if (d_params->operation == CS_ETM_OPERATION_PRINT) { | 
|  | /* set up a library default logger to process the | 
|  | *  raw frame printer we add later | 
|  | */ | 
|  | ocsd_def_errlog_init(OCSD_ERR_SEV_ERROR, 1); | 
|  |  | 
|  | /* no stdout / err / file output */ | 
|  | ocsd_def_errlog_config_output(C_API_MSGLOGOUT_FLG_NONE, NULL); | 
|  |  | 
|  | /* set the string CB for the default logger, | 
|  | * passes strings to perf print logger. | 
|  | */ | 
|  | ocsd_def_errlog_set_strprint_cb(decoder->dcd_tree, | 
|  | (void *)decoder, | 
|  | cs_etm_decoder__print_str_cb); | 
|  |  | 
|  | /* use the built in library printer for the raw frames */ | 
|  | ocsd_dt_set_raw_frame_printer(decoder->dcd_tree, | 
|  | CS_RAW_DEBUG_FLAGS); | 
|  | } | 
|  | } | 
|  | #else | 
|  | static void | 
|  | cs_etm_decoder__init_raw_frame_logging( | 
|  | struct cs_etm_decoder_params *d_params __maybe_unused, | 
|  | struct cs_etm_decoder *decoder __maybe_unused) | 
|  | { | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static int cs_etm_decoder__create_packet_printer(struct cs_etm_decoder *decoder, | 
|  | const char *decoder_name, | 
|  | void *trace_config) | 
|  | { | 
|  | u8 csid; | 
|  |  | 
|  | if (ocsd_dt_create_decoder(decoder->dcd_tree, decoder_name, | 
|  | OCSD_CREATE_FLG_PACKET_PROC, | 
|  | trace_config, &csid)) | 
|  | return -1; | 
|  |  | 
|  | if (ocsd_dt_set_pkt_protocol_printer(decoder->dcd_tree, csid, 0)) | 
|  | return -1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | cs_etm_decoder__create_etm_packet_printer(struct cs_etm_trace_params *t_params, | 
|  | struct cs_etm_decoder *decoder) | 
|  | { | 
|  | const char *decoder_name; | 
|  | ocsd_etmv3_cfg config_etmv3; | 
|  | ocsd_etmv4_cfg trace_config_etmv4; | 
|  | void *trace_config; | 
|  |  | 
|  | switch (t_params->protocol) { | 
|  | case CS_ETM_PROTO_ETMV3: | 
|  | case CS_ETM_PROTO_PTM: | 
|  | cs_etm_decoder__gen_etmv3_config(t_params, &config_etmv3); | 
|  | decoder_name = (t_params->protocol == CS_ETM_PROTO_ETMV3) ? | 
|  | OCSD_BUILTIN_DCD_ETMV3 : | 
|  | OCSD_BUILTIN_DCD_PTM; | 
|  | trace_config = &config_etmv3; | 
|  | break; | 
|  | case CS_ETM_PROTO_ETMV4i: | 
|  | cs_etm_decoder__gen_etmv4_config(t_params, &trace_config_etmv4); | 
|  | decoder_name = OCSD_BUILTIN_DCD_ETMV4I; | 
|  | trace_config = &trace_config_etmv4; | 
|  | break; | 
|  | default: | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | return cs_etm_decoder__create_packet_printer(decoder, | 
|  | decoder_name, | 
|  | trace_config); | 
|  | } | 
|  |  | 
|  | static ocsd_datapath_resp_t | 
|  | cs_etm_decoder__do_soft_timestamp(struct cs_etm_queue *etmq, | 
|  | struct cs_etm_packet_queue *packet_queue, | 
|  | const uint8_t trace_chan_id) | 
|  | { | 
|  | /* No timestamp packet has been received, nothing to do */ | 
|  | if (!packet_queue->timestamp) | 
|  | return OCSD_RESP_CONT; | 
|  |  | 
|  | packet_queue->timestamp = packet_queue->next_timestamp; | 
|  |  | 
|  | /* Estimate the timestamp for the next range packet */ | 
|  | packet_queue->next_timestamp += packet_queue->instr_count; | 
|  | packet_queue->instr_count = 0; | 
|  |  | 
|  | /* Tell the front end which traceid_queue needs attention */ | 
|  | cs_etm__etmq_set_traceid_queue_timestamp(etmq, trace_chan_id); | 
|  |  | 
|  | return OCSD_RESP_WAIT; | 
|  | } | 
|  |  | 
|  | static ocsd_datapath_resp_t | 
|  | cs_etm_decoder__do_hard_timestamp(struct cs_etm_queue *etmq, | 
|  | const ocsd_generic_trace_elem *elem, | 
|  | const uint8_t trace_chan_id) | 
|  | { | 
|  | struct cs_etm_packet_queue *packet_queue; | 
|  |  | 
|  | /* First get the packet queue for this traceID */ | 
|  | packet_queue = cs_etm__etmq_get_packet_queue(etmq, trace_chan_id); | 
|  | if (!packet_queue) | 
|  | return OCSD_RESP_FATAL_SYS_ERR; | 
|  |  | 
|  | /* | 
|  | * We've seen a timestamp packet before - simply record the new value. | 
|  | * Function do_soft_timestamp() will report the value to the front end, | 
|  | * hence asking the decoder to keep decoding rather than stopping. | 
|  | */ | 
|  | if (packet_queue->timestamp) { | 
|  | packet_queue->next_timestamp = elem->timestamp; | 
|  | return OCSD_RESP_CONT; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This is the first timestamp we've seen since the beginning of traces | 
|  | * or a discontinuity.  Since timestamps packets are generated *after* | 
|  | * range packets have been generated, we need to estimate the time at | 
|  | * which instructions started by substracting the number of instructions | 
|  | * executed to the timestamp. | 
|  | */ | 
|  | packet_queue->timestamp = elem->timestamp - packet_queue->instr_count; | 
|  | packet_queue->next_timestamp = elem->timestamp; | 
|  | packet_queue->instr_count = 0; | 
|  |  | 
|  | /* Tell the front end which traceid_queue needs attention */ | 
|  | cs_etm__etmq_set_traceid_queue_timestamp(etmq, trace_chan_id); | 
|  |  | 
|  | /* Halt processing until we are being told to proceed */ | 
|  | return OCSD_RESP_WAIT; | 
|  | } | 
|  |  | 
|  | static void | 
|  | cs_etm_decoder__reset_timestamp(struct cs_etm_packet_queue *packet_queue) | 
|  | { | 
|  | packet_queue->timestamp = 0; | 
|  | packet_queue->next_timestamp = 0; | 
|  | packet_queue->instr_count = 0; | 
|  | } | 
|  |  | 
|  | static ocsd_datapath_resp_t | 
|  | cs_etm_decoder__buffer_packet(struct cs_etm_packet_queue *packet_queue, | 
|  | const u8 trace_chan_id, | 
|  | enum cs_etm_sample_type sample_type) | 
|  | { | 
|  | u32 et = 0; | 
|  | int cpu; | 
|  |  | 
|  | if (packet_queue->packet_count >= CS_ETM_PACKET_MAX_BUFFER - 1) | 
|  | return OCSD_RESP_FATAL_SYS_ERR; | 
|  |  | 
|  | if (cs_etm__get_cpu(trace_chan_id, &cpu) < 0) | 
|  | return OCSD_RESP_FATAL_SYS_ERR; | 
|  |  | 
|  | et = packet_queue->tail; | 
|  | et = (et + 1) & (CS_ETM_PACKET_MAX_BUFFER - 1); | 
|  | packet_queue->tail = et; | 
|  | packet_queue->packet_count++; | 
|  |  | 
|  | packet_queue->packet_buffer[et].sample_type = sample_type; | 
|  | packet_queue->packet_buffer[et].isa = CS_ETM_ISA_UNKNOWN; | 
|  | packet_queue->packet_buffer[et].cpu = cpu; | 
|  | packet_queue->packet_buffer[et].start_addr = CS_ETM_INVAL_ADDR; | 
|  | packet_queue->packet_buffer[et].end_addr = CS_ETM_INVAL_ADDR; | 
|  | packet_queue->packet_buffer[et].instr_count = 0; | 
|  | packet_queue->packet_buffer[et].last_instr_taken_branch = false; | 
|  | packet_queue->packet_buffer[et].last_instr_size = 0; | 
|  | packet_queue->packet_buffer[et].last_instr_type = 0; | 
|  | packet_queue->packet_buffer[et].last_instr_subtype = 0; | 
|  | packet_queue->packet_buffer[et].last_instr_cond = 0; | 
|  | packet_queue->packet_buffer[et].flags = 0; | 
|  | packet_queue->packet_buffer[et].exception_number = UINT32_MAX; | 
|  | packet_queue->packet_buffer[et].trace_chan_id = trace_chan_id; | 
|  |  | 
|  | if (packet_queue->packet_count == CS_ETM_PACKET_MAX_BUFFER - 1) | 
|  | return OCSD_RESP_WAIT; | 
|  |  | 
|  | return OCSD_RESP_CONT; | 
|  | } | 
|  |  | 
|  | static ocsd_datapath_resp_t | 
|  | cs_etm_decoder__buffer_range(struct cs_etm_queue *etmq, | 
|  | struct cs_etm_packet_queue *packet_queue, | 
|  | const ocsd_generic_trace_elem *elem, | 
|  | const uint8_t trace_chan_id) | 
|  | { | 
|  | int ret = 0; | 
|  | struct cs_etm_packet *packet; | 
|  |  | 
|  | ret = cs_etm_decoder__buffer_packet(packet_queue, trace_chan_id, | 
|  | CS_ETM_RANGE); | 
|  | if (ret != OCSD_RESP_CONT && ret != OCSD_RESP_WAIT) | 
|  | return ret; | 
|  |  | 
|  | packet = &packet_queue->packet_buffer[packet_queue->tail]; | 
|  |  | 
|  | switch (elem->isa) { | 
|  | case ocsd_isa_aarch64: | 
|  | packet->isa = CS_ETM_ISA_A64; | 
|  | break; | 
|  | case ocsd_isa_arm: | 
|  | packet->isa = CS_ETM_ISA_A32; | 
|  | break; | 
|  | case ocsd_isa_thumb2: | 
|  | packet->isa = CS_ETM_ISA_T32; | 
|  | break; | 
|  | case ocsd_isa_tee: | 
|  | case ocsd_isa_jazelle: | 
|  | case ocsd_isa_custom: | 
|  | case ocsd_isa_unknown: | 
|  | default: | 
|  | packet->isa = CS_ETM_ISA_UNKNOWN; | 
|  | } | 
|  |  | 
|  | packet->start_addr = elem->st_addr; | 
|  | packet->end_addr = elem->en_addr; | 
|  | packet->instr_count = elem->num_instr_range; | 
|  | packet->last_instr_type = elem->last_i_type; | 
|  | packet->last_instr_subtype = elem->last_i_subtype; | 
|  | packet->last_instr_cond = elem->last_instr_cond; | 
|  |  | 
|  | switch (elem->last_i_type) { | 
|  | case OCSD_INSTR_BR: | 
|  | case OCSD_INSTR_BR_INDIRECT: | 
|  | packet->last_instr_taken_branch = elem->last_instr_exec; | 
|  | break; | 
|  | case OCSD_INSTR_ISB: | 
|  | case OCSD_INSTR_DSB_DMB: | 
|  | case OCSD_INSTR_WFI_WFE: | 
|  | case OCSD_INSTR_OTHER: | 
|  | default: | 
|  | packet->last_instr_taken_branch = false; | 
|  | break; | 
|  | } | 
|  |  | 
|  | packet->last_instr_size = elem->last_instr_sz; | 
|  |  | 
|  | /* per-thread scenario, no need to generate a timestamp */ | 
|  | if (cs_etm__etmq_is_timeless(etmq)) | 
|  | goto out; | 
|  |  | 
|  | /* | 
|  | * The packet queue is full and we haven't seen a timestamp (had we | 
|  | * seen one the packet queue wouldn't be full).  Let the front end | 
|  | * deal with it. | 
|  | */ | 
|  | if (ret == OCSD_RESP_WAIT) | 
|  | goto out; | 
|  |  | 
|  | packet_queue->instr_count += elem->num_instr_range; | 
|  | /* Tell the front end we have a new timestamp to process */ | 
|  | ret = cs_etm_decoder__do_soft_timestamp(etmq, packet_queue, | 
|  | trace_chan_id); | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static ocsd_datapath_resp_t | 
|  | cs_etm_decoder__buffer_discontinuity(struct cs_etm_packet_queue *queue, | 
|  | const uint8_t trace_chan_id) | 
|  | { | 
|  | /* | 
|  | * Something happened and who knows when we'll get new traces so | 
|  | * reset time statistics. | 
|  | */ | 
|  | cs_etm_decoder__reset_timestamp(queue); | 
|  | return cs_etm_decoder__buffer_packet(queue, trace_chan_id, | 
|  | CS_ETM_DISCONTINUITY); | 
|  | } | 
|  |  | 
|  | static ocsd_datapath_resp_t | 
|  | cs_etm_decoder__buffer_exception(struct cs_etm_packet_queue *queue, | 
|  | const ocsd_generic_trace_elem *elem, | 
|  | const uint8_t trace_chan_id) | 
|  | {	int ret = 0; | 
|  | struct cs_etm_packet *packet; | 
|  |  | 
|  | ret = cs_etm_decoder__buffer_packet(queue, trace_chan_id, | 
|  | CS_ETM_EXCEPTION); | 
|  | if (ret != OCSD_RESP_CONT && ret != OCSD_RESP_WAIT) | 
|  | return ret; | 
|  |  | 
|  | packet = &queue->packet_buffer[queue->tail]; | 
|  | packet->exception_number = elem->exception_number; | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static ocsd_datapath_resp_t | 
|  | cs_etm_decoder__buffer_exception_ret(struct cs_etm_packet_queue *queue, | 
|  | const uint8_t trace_chan_id) | 
|  | { | 
|  | return cs_etm_decoder__buffer_packet(queue, trace_chan_id, | 
|  | CS_ETM_EXCEPTION_RET); | 
|  | } | 
|  |  | 
|  | static ocsd_datapath_resp_t | 
|  | cs_etm_decoder__set_tid(struct cs_etm_queue *etmq, | 
|  | struct cs_etm_packet_queue *packet_queue, | 
|  | const ocsd_generic_trace_elem *elem, | 
|  | const uint8_t trace_chan_id) | 
|  | { | 
|  | pid_t tid; | 
|  |  | 
|  | /* Ignore PE_CONTEXT packets that don't have a valid contextID */ | 
|  | if (!elem->context.ctxt_id_valid) | 
|  | return OCSD_RESP_CONT; | 
|  |  | 
|  | tid =  elem->context.context_id; | 
|  | if (cs_etm__etmq_set_tid(etmq, tid, trace_chan_id)) | 
|  | return OCSD_RESP_FATAL_SYS_ERR; | 
|  |  | 
|  | /* | 
|  | * A timestamp is generated after a PE_CONTEXT element so make sure | 
|  | * to rely on that coming one. | 
|  | */ | 
|  | cs_etm_decoder__reset_timestamp(packet_queue); | 
|  |  | 
|  | return OCSD_RESP_CONT; | 
|  | } | 
|  |  | 
|  | static ocsd_datapath_resp_t cs_etm_decoder__gen_trace_elem_printer( | 
|  | const void *context, | 
|  | const ocsd_trc_index_t indx __maybe_unused, | 
|  | const u8 trace_chan_id __maybe_unused, | 
|  | const ocsd_generic_trace_elem *elem) | 
|  | { | 
|  | ocsd_datapath_resp_t resp = OCSD_RESP_CONT; | 
|  | struct cs_etm_decoder *decoder = (struct cs_etm_decoder *) context; | 
|  | struct cs_etm_queue *etmq = decoder->data; | 
|  | struct cs_etm_packet_queue *packet_queue; | 
|  |  | 
|  | /* First get the packet queue for this traceID */ | 
|  | packet_queue = cs_etm__etmq_get_packet_queue(etmq, trace_chan_id); | 
|  | if (!packet_queue) | 
|  | return OCSD_RESP_FATAL_SYS_ERR; | 
|  |  | 
|  | switch (elem->elem_type) { | 
|  | case OCSD_GEN_TRC_ELEM_UNKNOWN: | 
|  | break; | 
|  | case OCSD_GEN_TRC_ELEM_EO_TRACE: | 
|  | case OCSD_GEN_TRC_ELEM_NO_SYNC: | 
|  | case OCSD_GEN_TRC_ELEM_TRACE_ON: | 
|  | resp = cs_etm_decoder__buffer_discontinuity(packet_queue, | 
|  | trace_chan_id); | 
|  | break; | 
|  | case OCSD_GEN_TRC_ELEM_INSTR_RANGE: | 
|  | resp = cs_etm_decoder__buffer_range(etmq, packet_queue, elem, | 
|  | trace_chan_id); | 
|  | break; | 
|  | case OCSD_GEN_TRC_ELEM_EXCEPTION: | 
|  | resp = cs_etm_decoder__buffer_exception(packet_queue, elem, | 
|  | trace_chan_id); | 
|  | break; | 
|  | case OCSD_GEN_TRC_ELEM_EXCEPTION_RET: | 
|  | resp = cs_etm_decoder__buffer_exception_ret(packet_queue, | 
|  | trace_chan_id); | 
|  | break; | 
|  | case OCSD_GEN_TRC_ELEM_TIMESTAMP: | 
|  | resp = cs_etm_decoder__do_hard_timestamp(etmq, elem, | 
|  | trace_chan_id); | 
|  | break; | 
|  | case OCSD_GEN_TRC_ELEM_PE_CONTEXT: | 
|  | resp = cs_etm_decoder__set_tid(etmq, packet_queue, | 
|  | elem, trace_chan_id); | 
|  | break; | 
|  | case OCSD_GEN_TRC_ELEM_ADDR_NACC: | 
|  | case OCSD_GEN_TRC_ELEM_CYCLE_COUNT: | 
|  | case OCSD_GEN_TRC_ELEM_ADDR_UNKNOWN: | 
|  | case OCSD_GEN_TRC_ELEM_EVENT: | 
|  | case OCSD_GEN_TRC_ELEM_SWTRACE: | 
|  | case OCSD_GEN_TRC_ELEM_CUSTOM: | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | return resp; | 
|  | } | 
|  |  | 
|  | static int cs_etm_decoder__create_etm_packet_decoder( | 
|  | struct cs_etm_trace_params *t_params, | 
|  | struct cs_etm_decoder *decoder) | 
|  | { | 
|  | const char *decoder_name; | 
|  | ocsd_etmv3_cfg config_etmv3; | 
|  | ocsd_etmv4_cfg trace_config_etmv4; | 
|  | void *trace_config; | 
|  | u8 csid; | 
|  |  | 
|  | switch (t_params->protocol) { | 
|  | case CS_ETM_PROTO_ETMV3: | 
|  | case CS_ETM_PROTO_PTM: | 
|  | cs_etm_decoder__gen_etmv3_config(t_params, &config_etmv3); | 
|  | decoder_name = (t_params->protocol == CS_ETM_PROTO_ETMV3) ? | 
|  | OCSD_BUILTIN_DCD_ETMV3 : | 
|  | OCSD_BUILTIN_DCD_PTM; | 
|  | trace_config = &config_etmv3; | 
|  | break; | 
|  | case CS_ETM_PROTO_ETMV4i: | 
|  | cs_etm_decoder__gen_etmv4_config(t_params, &trace_config_etmv4); | 
|  | decoder_name = OCSD_BUILTIN_DCD_ETMV4I; | 
|  | trace_config = &trace_config_etmv4; | 
|  | break; | 
|  | default: | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | if (ocsd_dt_create_decoder(decoder->dcd_tree, | 
|  | decoder_name, | 
|  | OCSD_CREATE_FLG_FULL_DECODER, | 
|  | trace_config, &csid)) | 
|  | return -1; | 
|  |  | 
|  | if (ocsd_dt_set_gen_elem_outfn(decoder->dcd_tree, | 
|  | cs_etm_decoder__gen_trace_elem_printer, | 
|  | decoder)) | 
|  | return -1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | cs_etm_decoder__create_etm_decoder(struct cs_etm_decoder_params *d_params, | 
|  | struct cs_etm_trace_params *t_params, | 
|  | struct cs_etm_decoder *decoder) | 
|  | { | 
|  | if (d_params->operation == CS_ETM_OPERATION_PRINT) | 
|  | return cs_etm_decoder__create_etm_packet_printer(t_params, | 
|  | decoder); | 
|  | else if (d_params->operation == CS_ETM_OPERATION_DECODE) | 
|  | return cs_etm_decoder__create_etm_packet_decoder(t_params, | 
|  | decoder); | 
|  |  | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | struct cs_etm_decoder * | 
|  | cs_etm_decoder__new(int num_cpu, struct cs_etm_decoder_params *d_params, | 
|  | struct cs_etm_trace_params t_params[]) | 
|  | { | 
|  | struct cs_etm_decoder *decoder; | 
|  | ocsd_dcd_tree_src_t format; | 
|  | u32 flags; | 
|  | int i, ret; | 
|  |  | 
|  | if ((!t_params) || (!d_params)) | 
|  | return NULL; | 
|  |  | 
|  | decoder = zalloc(sizeof(*decoder)); | 
|  |  | 
|  | if (!decoder) | 
|  | return NULL; | 
|  |  | 
|  | decoder->data = d_params->data; | 
|  | decoder->prev_return = OCSD_RESP_CONT; | 
|  | format = (d_params->formatted ? OCSD_TRC_SRC_FRAME_FORMATTED : | 
|  | OCSD_TRC_SRC_SINGLE); | 
|  | flags = 0; | 
|  | flags |= (d_params->fsyncs ? OCSD_DFRMTR_HAS_FSYNCS : 0); | 
|  | flags |= (d_params->hsyncs ? OCSD_DFRMTR_HAS_HSYNCS : 0); | 
|  | flags |= (d_params->frame_aligned ? OCSD_DFRMTR_FRAME_MEM_ALIGN : 0); | 
|  |  | 
|  | /* | 
|  | * Drivers may add barrier frames when used with perf, set up to | 
|  | * handle this. Barriers const of FSYNC packet repeated 4 times. | 
|  | */ | 
|  | flags |= OCSD_DFRMTR_RESET_ON_4X_FSYNC; | 
|  |  | 
|  | /* Create decode tree for the data source */ | 
|  | decoder->dcd_tree = ocsd_create_dcd_tree(format, flags); | 
|  |  | 
|  | if (decoder->dcd_tree == 0) | 
|  | goto err_free_decoder; | 
|  |  | 
|  | /* init library print logging support */ | 
|  | ret = cs_etm_decoder__init_def_logger_printing(d_params, decoder); | 
|  | if (ret != 0) | 
|  | goto err_free_decoder; | 
|  |  | 
|  | /* init raw frame logging if required */ | 
|  | cs_etm_decoder__init_raw_frame_logging(d_params, decoder); | 
|  |  | 
|  | for (i = 0; i < num_cpu; i++) { | 
|  | ret = cs_etm_decoder__create_etm_decoder(d_params, | 
|  | &t_params[i], | 
|  | decoder); | 
|  | if (ret != 0) | 
|  | goto err_free_decoder; | 
|  | } | 
|  |  | 
|  | return decoder; | 
|  |  | 
|  | err_free_decoder: | 
|  | cs_etm_decoder__free(decoder); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | int cs_etm_decoder__process_data_block(struct cs_etm_decoder *decoder, | 
|  | u64 indx, const u8 *buf, | 
|  | size_t len, size_t *consumed) | 
|  | { | 
|  | int ret = 0; | 
|  | ocsd_datapath_resp_t cur = OCSD_RESP_CONT; | 
|  | ocsd_datapath_resp_t prev_return = decoder->prev_return; | 
|  | size_t processed = 0; | 
|  | u32 count; | 
|  |  | 
|  | while (processed < len) { | 
|  | if (OCSD_DATA_RESP_IS_WAIT(prev_return)) { | 
|  | cur = ocsd_dt_process_data(decoder->dcd_tree, | 
|  | OCSD_OP_FLUSH, | 
|  | 0, | 
|  | 0, | 
|  | NULL, | 
|  | NULL); | 
|  | } else if (OCSD_DATA_RESP_IS_CONT(prev_return)) { | 
|  | cur = ocsd_dt_process_data(decoder->dcd_tree, | 
|  | OCSD_OP_DATA, | 
|  | indx + processed, | 
|  | len - processed, | 
|  | &buf[processed], | 
|  | &count); | 
|  | processed += count; | 
|  | } else { | 
|  | ret = -EINVAL; | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Return to the input code if the packet buffer is full. | 
|  | * Flushing will get done once the packet buffer has been | 
|  | * processed. | 
|  | */ | 
|  | if (OCSD_DATA_RESP_IS_WAIT(cur)) | 
|  | break; | 
|  |  | 
|  | prev_return = cur; | 
|  | } | 
|  |  | 
|  | decoder->prev_return = cur; | 
|  | *consumed = processed; | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | void cs_etm_decoder__free(struct cs_etm_decoder *decoder) | 
|  | { | 
|  | if (!decoder) | 
|  | return; | 
|  |  | 
|  | ocsd_destroy_dcd_tree(decoder->dcd_tree); | 
|  | decoder->dcd_tree = NULL; | 
|  | free(decoder); | 
|  | } |