| // SPDX-License-Identifier: GPL-2.0-only | 
 | /* | 
 |  * Arizona-i2c.c  --  Arizona I2C bus interface | 
 |  * | 
 |  * Copyright 2012 Wolfson Microelectronics plc | 
 |  * | 
 |  * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> | 
 |  */ | 
 |  | 
 | #include <linux/err.h> | 
 | #include <linux/i2c.h> | 
 | #include <linux/module.h> | 
 | #include <linux/pm_runtime.h> | 
 | #include <linux/regmap.h> | 
 | #include <linux/regulator/consumer.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/of.h> | 
 |  | 
 | #include <linux/mfd/arizona/core.h> | 
 |  | 
 | #include "arizona.h" | 
 |  | 
 | static int arizona_i2c_probe(struct i2c_client *i2c, | 
 | 			     const struct i2c_device_id *id) | 
 | { | 
 | 	const void *match_data; | 
 | 	struct arizona *arizona; | 
 | 	const struct regmap_config *regmap_config = NULL; | 
 | 	unsigned long type = 0; | 
 | 	int ret; | 
 |  | 
 | 	match_data = device_get_match_data(&i2c->dev); | 
 | 	if (match_data) | 
 | 		type = (unsigned long)match_data; | 
 | 	else if (id) | 
 | 		type = id->driver_data; | 
 |  | 
 | 	switch (type) { | 
 | 	case WM5102: | 
 | 		if (IS_ENABLED(CONFIG_MFD_WM5102)) | 
 | 			regmap_config = &wm5102_i2c_regmap; | 
 | 		break; | 
 | 	case WM5110: | 
 | 	case WM8280: | 
 | 		if (IS_ENABLED(CONFIG_MFD_WM5110)) | 
 | 			regmap_config = &wm5110_i2c_regmap; | 
 | 		break; | 
 | 	case WM8997: | 
 | 		if (IS_ENABLED(CONFIG_MFD_WM8997)) | 
 | 			regmap_config = &wm8997_i2c_regmap; | 
 | 		break; | 
 | 	case WM8998: | 
 | 	case WM1814: | 
 | 		if (IS_ENABLED(CONFIG_MFD_WM8998)) | 
 | 			regmap_config = &wm8998_i2c_regmap; | 
 | 		break; | 
 | 	default: | 
 | 		dev_err(&i2c->dev, "Unknown device type %ld\n", type); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	if (!regmap_config) { | 
 | 		dev_err(&i2c->dev, | 
 | 			"No kernel support for device type %ld\n", type); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	arizona = devm_kzalloc(&i2c->dev, sizeof(*arizona), GFP_KERNEL); | 
 | 	if (arizona == NULL) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	arizona->regmap = devm_regmap_init_i2c(i2c, regmap_config); | 
 | 	if (IS_ERR(arizona->regmap)) { | 
 | 		ret = PTR_ERR(arizona->regmap); | 
 | 		dev_err(&i2c->dev, "Failed to allocate register map: %d\n", | 
 | 			ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	arizona->type = type; | 
 | 	arizona->dev = &i2c->dev; | 
 | 	arizona->irq = i2c->irq; | 
 |  | 
 | 	return arizona_dev_init(arizona); | 
 | } | 
 |  | 
 | static int arizona_i2c_remove(struct i2c_client *i2c) | 
 | { | 
 | 	struct arizona *arizona = dev_get_drvdata(&i2c->dev); | 
 |  | 
 | 	arizona_dev_exit(arizona); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct i2c_device_id arizona_i2c_id[] = { | 
 | 	{ "wm5102", WM5102 }, | 
 | 	{ "wm5110", WM5110 }, | 
 | 	{ "wm8280", WM8280 }, | 
 | 	{ "wm8997", WM8997 }, | 
 | 	{ "wm8998", WM8998 }, | 
 | 	{ "wm1814", WM1814 }, | 
 | 	{ } | 
 | }; | 
 | MODULE_DEVICE_TABLE(i2c, arizona_i2c_id); | 
 |  | 
 | static struct i2c_driver arizona_i2c_driver = { | 
 | 	.driver = { | 
 | 		.name	= "arizona", | 
 | 		.pm	= &arizona_pm_ops, | 
 | 		.of_match_table	= of_match_ptr(arizona_of_match), | 
 | 	}, | 
 | 	.probe		= arizona_i2c_probe, | 
 | 	.remove		= arizona_i2c_remove, | 
 | 	.id_table	= arizona_i2c_id, | 
 | }; | 
 |  | 
 | module_i2c_driver(arizona_i2c_driver); | 
 |  | 
 | MODULE_SOFTDEP("pre: arizona_ldo1"); | 
 | MODULE_DESCRIPTION("Arizona I2C bus interface"); | 
 | MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); | 
 | MODULE_LICENSE("GPL"); |