Documentation/networking/mctp.rst - third_party/kernel - Git at Google

 .. SPDX-License-Identifier: GPL-2.0

 ==============================================
 Management Component Transport Protocol (MCTP)
 ==============================================

 net/mctp/ contains protocol support for MCTP, as defined by DMTF standard
 DSP0236. Physical interface drivers ("bindings" in the specification) are
 provided in drivers/net/mctp/.

 The core code provides a socket-based interface to send and receive MCTP
 messages, through an AF_MCTP, SOCK_DGRAM socket.

 Structure: interfaces & networks
 ================================

 The kernel models the local MCTP topology through two items: interfaces and
 networks.

 An interface (or "link") is an instance of an MCTP physical transport binding
 (as defined by DSP0236, section 3.2.47), likely connected to a specific hardware
 device. This is represented as a ``struct netdevice``.

 A network defines a unique address space for MCTP endpoints by endpoint-ID
 (described by DSP0236, section 3.2.31). A network has a user-visible identifier
 to allow references from userspace. Route definitions are specific to one
 network.

 Interfaces are associated with one network. A network may be associated with one
 or more interfaces.

 If multiple networks are present, each may contain endpoint IDs (EIDs) that are
 also present on other networks.

 Sockets API
 ===========

 Protocol definitions
 --------------------

 MCTP uses ``AF_MCTP`` / ``PF_MCTP`` for the address- and protocol- families.
 Since MCTP is message-based, only ``SOCK_DGRAM`` sockets are supported.

 .. code-block:: C

     int sd = socket(AF_MCTP, SOCK_DGRAM, 0);

 The only (current) value for the ``protocol`` argument is 0.

 As with all socket address families, source and destination addresses are
 specified with a ``sockaddr`` type, with a single-byte endpoint address:

 .. code-block:: C

     typedef __u8		mctp_eid_t;

     struct mctp_addr {
             mctp_eid_t		s_addr;
     };

     struct sockaddr_mctp {
             __kernel_sa_family_t smctp_family;
             unsigned int         smctp_network;
             struct mctp_addr     smctp_addr;
             __u8                 smctp_type;
             __u8                 smctp_tag;
     };

     #define MCTP_NET_ANY	0x0
     #define MCTP_ADDR_ANY	0xff


 Syscall behaviour
 -----------------

 The following sections describe the MCTP-specific behaviours of the standard
 socket system calls. These behaviours have been chosen to map closely to the
 existing sockets APIs.

 ``bind()`` : set local socket address
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

 Sockets that receive incoming request packets will bind to a local address,
 using the ``bind()`` syscall.

 .. code-block:: C

     struct sockaddr_mctp addr;

     addr.smctp_family = AF_MCTP;
     addr.smctp_network = MCTP_NET_ANY;
     addr.smctp_addr.s_addr = MCTP_ADDR_ANY;
     addr.smctp_type = MCTP_TYPE_PLDM;
     addr.smctp_tag = MCTP_TAG_OWNER;

     int rc = bind(sd, (struct sockaddr *)&addr, sizeof(addr));

 This establishes the local address of the socket. Incoming MCTP messages that
 match the network, address, and message type will be received by this socket.
 The reference to 'incoming' is important here; a bound socket will only receive
 messages with the TO bit set, to indicate an incoming request message, rather
 than a response.

 The ``smctp_tag`` value will configure the tags accepted from the remote side of
 this socket. Given the above, the only valid value is ``MCTP_TAG_OWNER``, which
 will result in remotely "owned" tags being routed to this socket. Since
 ``MCTP_TAG_OWNER`` is set, the 3 least-significant bits of ``smctp_tag`` are not
 used; callers must set them to zero.

 A ``smctp_network`` value of ``MCTP_NET_ANY`` will configure the socket to
 receive incoming packets from any locally-connected network. A specific network
 value will cause the socket to only receive incoming messages from that network.

 The ``smctp_addr`` field specifies a local address to bind to. A value of
 ``MCTP_ADDR_ANY`` configures the socket to receive messages addressed to any
 local destination EID.

 The ``smctp_type`` field specifies which message types to receive. Only the
 lower 7 bits of the type is matched on incoming messages (ie., the
 most-significant IC bit is not part of the match). This results in the socket
 receiving packets with and without a message integrity check footer.

 ``sendto()``, ``sendmsg()``, ``send()`` : transmit an MCTP message
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

 An MCTP message is transmitted using one of the ``sendto()``, ``sendmsg()`` or
 ``send()`` syscalls. Using ``sendto()`` as the primary example:

 .. code-block:: C

     struct sockaddr_mctp addr;
     char buf[14];
     ssize_t len;

     /* set message destination */
     addr.smctp_family = AF_MCTP;
     addr.smctp_network = 0;
     addr.smctp_addr.s_addr = 8;
     addr.smctp_tag = MCTP_TAG_OWNER;
     addr.smctp_type = MCTP_TYPE_ECHO;

     /* arbitrary message to send, with message-type header */
     buf[0] = MCTP_TYPE_ECHO;
     memcpy(buf + 1, "hello, world!", sizeof(buf) - 1);

     len = sendto(sd, buf, sizeof(buf), 0,
                     (struct sockaddr_mctp *)&addr, sizeof(addr));

 The network and address fields of ``addr`` define the remote address to send to.
 If ``smctp_tag`` has the ``MCTP_TAG_OWNER``, the kernel will ignore any bits set
 in ``MCTP_TAG_VALUE``, and generate a tag value suitable for the destination
 EID. If ``MCTP_TAG_OWNER`` is not set, the message will be sent with the tag
 value as specified. If a tag value cannot be allocated, the system call will
 report an errno of ``EAGAIN``.

 The application must provide the message type byte as the first byte of the
 message buffer passed to ``sendto()``. If a message integrity check is to be
 included in the transmitted message, it must also be provided in the message
 buffer, and the most-significant bit of the message type byte must be 1.

 The ``sendmsg()`` system call allows a more compact argument interface, and the
 message buffer to be specified as a scatter-gather list. At present no ancillary
 message types (used for the ``msg_control`` data passed to ``sendmsg()``) are
 defined.

 Transmitting a message on an unconnected socket with ``MCTP_TAG_OWNER``
 specified will cause an allocation of a tag, if no valid tag is already
 allocated for that destination. The (destination-eid,tag) tuple acts as an
 implicit local socket address, to allow the socket to receive responses to this
 outgoing message. If any previous allocation has been performed (to for a
 different remote EID), that allocation is lost.

 Sockets will only receive responses to requests they have sent (with TO=1) and
 may only respond (with TO=0) to requests they have received.

 ``recvfrom()``, ``recvmsg()``, ``recv()`` : receive an MCTP message
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

 An MCTP message can be received by an application using one of the
 ``recvfrom()``, ``recvmsg()``, or ``recv()`` system calls. Using ``recvfrom()``
 as the primary example:

 .. code-block:: C

     struct sockaddr_mctp addr;
     socklen_t addrlen;
     char buf[14];
     ssize_t len;

     addrlen = sizeof(addr);

     len = recvfrom(sd, buf, sizeof(buf), 0,
                     (struct sockaddr_mctp *)&addr, &addrlen);

     /* We can expect addr to describe an MCTP address */
     assert(addrlen >= sizeof(buf));
     assert(addr.smctp_family == AF_MCTP);

     printf("received %zd bytes from remote EID %d\n", rc, addr.smctp_addr);

 The address argument to ``recvfrom`` and ``recvmsg`` is populated with the
 remote address of the incoming message, including tag value (this will be needed
 in order to reply to the message).

 The first byte of the message buffer will contain the message type byte. If an
 integrity check follows the message, it will be included in the received buffer.

 The ``recv()`` system call behaves in a similar way, but does not provide a
 remote address to the application. Therefore, these are only useful if the
 remote address is already known, or the message does not require a reply.

 Like the send calls, sockets will only receive responses to requests they have
 sent (TO=1) and may only respond (TO=0) to requests they have received.
	.. SPDX-License-Identifier: GPL-2.0

	==============================================
	Management Component Transport Protocol (MCTP)
	==============================================

	net/mctp/ contains protocol support for MCTP, as defined by DMTF standard
	DSP0236. Physical interface drivers ("bindings" in the specification) are
	provided in drivers/net/mctp/.

	The core code provides a socket-based interface to send and receive MCTP
	messages, through an AF_MCTP, SOCK_DGRAM socket.

	Structure: interfaces & networks
	================================

	The kernel models the local MCTP topology through two items: interfaces and
	networks.

	An interface (or "link") is an instance of an MCTP physical transport binding
	(as defined by DSP0236, section 3.2.47), likely connected to a specific hardware
	device. This is represented as a ``struct netdevice``.

	A network defines a unique address space for MCTP endpoints by endpoint-ID
	(described by DSP0236, section 3.2.31). A network has a user-visible identifier
	to allow references from userspace. Route definitions are specific to one
	network.

	Interfaces are associated with one network. A network may be associated with one
	or more interfaces.

	If multiple networks are present, each may contain endpoint IDs (EIDs) that are
	also present on other networks.

	Sockets API
	===========

	Protocol definitions
	--------------------

	MCTP uses ``AF_MCTP`` / ``PF_MCTP`` for the address- and protocol- families.
	Since MCTP is message-based, only ``SOCK_DGRAM`` sockets are supported.

	.. code-block:: C

	int sd = socket(AF_MCTP, SOCK_DGRAM, 0);

	The only (current) value for the ``protocol`` argument is 0.

	As with all socket address families, source and destination addresses are
	specified with a ``sockaddr`` type, with a single-byte endpoint address:

	.. code-block:: C

	typedef __u8 mctp_eid_t;

	struct mctp_addr {
	mctp_eid_t s_addr;
	};

	struct sockaddr_mctp {
	__kernel_sa_family_t smctp_family;
	unsigned int smctp_network;
	struct mctp_addr smctp_addr;
	__u8 smctp_type;
	__u8 smctp_tag;
	};

	#define MCTP_NET_ANY 0x0
	#define MCTP_ADDR_ANY 0xff


	Syscall behaviour
	-----------------

	The following sections describe the MCTP-specific behaviours of the standard
	socket system calls. These behaviours have been chosen to map closely to the
	existing sockets APIs.

	``bind()`` : set local socket address
	^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

	Sockets that receive incoming request packets will bind to a local address,
	using the ``bind()`` syscall.

	.. code-block:: C

	struct sockaddr_mctp addr;

	addr.smctp_family = AF_MCTP;
	addr.smctp_network = MCTP_NET_ANY;
	addr.smctp_addr.s_addr = MCTP_ADDR_ANY;
	addr.smctp_type = MCTP_TYPE_PLDM;
	addr.smctp_tag = MCTP_TAG_OWNER;

	int rc = bind(sd, (struct sockaddr *)&addr, sizeof(addr));

	This establishes the local address of the socket. Incoming MCTP messages that
	match the network, address, and message type will be received by this socket.
	The reference to 'incoming' is important here; a bound socket will only receive
	messages with the TO bit set, to indicate an incoming request message, rather
	than a response.

	The ``smctp_tag`` value will configure the tags accepted from the remote side of
	this socket. Given the above, the only valid value is ``MCTP_TAG_OWNER``, which
	will result in remotely "owned" tags being routed to this socket. Since
	``MCTP_TAG_OWNER`` is set, the 3 least-significant bits of ``smctp_tag`` are not
	used; callers must set them to zero.

	A ``smctp_network`` value of ``MCTP_NET_ANY`` will configure the socket to
	receive incoming packets from any locally-connected network. A specific network
	value will cause the socket to only receive incoming messages from that network.

	The ``smctp_addr`` field specifies a local address to bind to. A value of
	``MCTP_ADDR_ANY`` configures the socket to receive messages addressed to any
	local destination EID.

	The ``smctp_type`` field specifies which message types to receive. Only the
	lower 7 bits of the type is matched on incoming messages (ie., the
	most-significant IC bit is not part of the match). This results in the socket
	receiving packets with and without a message integrity check footer.

	``sendto()``, ``sendmsg()``, ``send()`` : transmit an MCTP message
	^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

	An MCTP message is transmitted using one of the ``sendto()``, ``sendmsg()`` or
	``send()`` syscalls. Using ``sendto()`` as the primary example:

	.. code-block:: C

	struct sockaddr_mctp addr;
	char buf[14];
	ssize_t len;

	/* set message destination */
	addr.smctp_family = AF_MCTP;
	addr.smctp_network = 0;
	addr.smctp_addr.s_addr = 8;
	addr.smctp_tag = MCTP_TAG_OWNER;
	addr.smctp_type = MCTP_TYPE_ECHO;

	/* arbitrary message to send, with message-type header */
	buf[0] = MCTP_TYPE_ECHO;
	memcpy(buf + 1, "hello, world!", sizeof(buf) - 1);

	len = sendto(sd, buf, sizeof(buf), 0,
	(struct sockaddr_mctp *)&addr, sizeof(addr));

	The network and address fields of ``addr`` define the remote address to send to.
	If ``smctp_tag`` has the ``MCTP_TAG_OWNER``, the kernel will ignore any bits set
	in ``MCTP_TAG_VALUE``, and generate a tag value suitable for the destination
	EID. If ``MCTP_TAG_OWNER`` is not set, the message will be sent with the tag
	value as specified. If a tag value cannot be allocated, the system call will
	report an errno of ``EAGAIN``.

	The application must provide the message type byte as the first byte of the
	message buffer passed to ``sendto()``. If a message integrity check is to be
	included in the transmitted message, it must also be provided in the message
	buffer, and the most-significant bit of the message type byte must be 1.

	The ``sendmsg()`` system call allows a more compact argument interface, and the
	message buffer to be specified as a scatter-gather list. At present no ancillary
	message types (used for the ``msg_control`` data passed to ``sendmsg()``) are
	defined.

	Transmitting a message on an unconnected socket with ``MCTP_TAG_OWNER``
	specified will cause an allocation of a tag, if no valid tag is already
	allocated for that destination. The (destination-eid,tag) tuple acts as an
	implicit local socket address, to allow the socket to receive responses to this
	outgoing message. If any previous allocation has been performed (to for a
	different remote EID), that allocation is lost.

	Sockets will only receive responses to requests they have sent (with TO=1) and
	may only respond (with TO=0) to requests they have received.

	``recvfrom()``, ``recvmsg()``, ``recv()`` : receive an MCTP message
	^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

	An MCTP message can be received by an application using one of the
	``recvfrom()``, ``recvmsg()``, or ``recv()`` system calls. Using ``recvfrom()``
	as the primary example:

	.. code-block:: C

	struct sockaddr_mctp addr;
	socklen_t addrlen;
	char buf[14];
	ssize_t len;

	addrlen = sizeof(addr);

	len = recvfrom(sd, buf, sizeof(buf), 0,
	(struct sockaddr_mctp *)&addr, &addrlen);

	/* We can expect addr to describe an MCTP address */
	assert(addrlen >= sizeof(buf));
	assert(addr.smctp_family == AF_MCTP);

	printf("received %zd bytes from remote EID %d\n", rc, addr.smctp_addr);

	The address argument to ``recvfrom`` and ``recvmsg`` is populated with the
	remote address of the incoming message, including tag value (this will be needed
	in order to reply to the message).

	The first byte of the message buffer will contain the message type byte. If an
	integrity check follows the message, it will be included in the received buffer.

	The ``recv()`` system call behaves in a similar way, but does not provide a
	remote address to the application. Therefore, these are only useful if the
	remote address is already known, or the message does not require a reply.

	Like the send calls, sockets will only receive responses to requests they have
	sent (TO=1) and may only respond (TO=0) to requests they have received.