Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Olof Johansson:
"A set of fixes that have trickled in over the last couple of weeks:
- MAINTAINER update for Cavium/Marvell ThunderX2
- stm32 tweaks to pinmux for Joystick/Camera, and RAM allocation for
CAN interfaces
- i.MX fixes for voltage regulator GPIO mappings, fixes voltage
scaling issues
- More i.MX fixes for various issues on i.MX eval boards: interrupt
storm due to u-boot leaving pins in new states, fixing power button
config, a couple of compatible-string corrections.
- Powerdown and Suspend/Resume fixes for Allwinner A83-based tablets
- A few documentation tweaks and a fix of a memory leak in the reset
subsystem"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: update Cavium ThunderX2 maintainers
ARM: dts: stm32: change joystick pinctrl definition on stm32mp157c-ev1
ARM: dts: stm32: remove OV5640 pinctrl definition on stm32mp157c-ev1
ARM: dts: stm32: Fix CAN RAM mapping on stm32mp157c
ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157
arm64: dts: zii-ultra: fix ARM regulator GPIO handle
ARM: sunxi: Fix CPU powerdown on A83T
ARM: dts: sun8i-a83t-tbs-a711: Fix WiFi resume from suspend
arm64: dts: imx8mn: fix compatible string for sdma
arm64: dts: imx8mm: fix compatible string for sdma
reset: fix reset_control_ops kerneldoc comment
ARM: dts: imx6-logicpd: Re-enable SNVS power key
soc: imx: gpc: fix initialiser format
ARM: dts: imx6qdl-sabreauto: Fix storm of accelerometer interrupts
arm64: dts: ls1028a: fix a compatible issue
reset: fix reset_control_get_exclusive kerneldoc comment
reset: fix reset_control_lookup kerneldoc comment
reset: fix of_reset_control_get_count kerneldoc comment
reset: fix of_reset_simple_xlate kerneldoc comment
reset: Fix memory leak in reset_control_array_put()
diff --git a/.mailmap b/.mailmap
index 83d7e75..fd62192 100644
--- a/.mailmap
+++ b/.mailmap
@@ -108,6 +108,10 @@
Jason Gunthorpe <jgg@ziepe.ca> <jgunthorpe@obsidianresearch.com>
Javi Merino <javi.merino@kernel.org> <javi.merino@arm.com>
<javier@osg.samsung.com> <javier.martinez@collabora.co.uk>
+Jayachandran C <c.jayachandran@gmail.com> <jayachandranc@netlogicmicro.com>
+Jayachandran C <c.jayachandran@gmail.com> <jchandra@broadcom.com>
+Jayachandran C <c.jayachandran@gmail.com> <jchandra@digeo.com>
+Jayachandran C <c.jayachandran@gmail.com> <jnair@caviumnetworks.com>
Jean Tourrilhes <jt@hpl.hp.com>
<jean-philippe@linaro.org> <jean-philippe.brucker@arm.com>
Jeff Garzik <jgarzik@pretzel.yyz.us>
diff --git a/MAINTAINERS b/MAINTAINERS
index 434981d2..eb19fad 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3738,7 +3738,6 @@
CAVIUM THUNDERX2 ARM64 SOC
M: Robert Richter <rrichter@cavium.com>
-M: Jayachandran C <jnair@caviumnetworks.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm64/boot/dts/cavium/thunder2-99xx*
diff --git a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi
index 2a6ce87..9e027b9 100644
--- a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi
+++ b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi
@@ -328,6 +328,10 @@
pinctrl-0 = <&pinctrl_pwm3>;
};
+&snvs_pwrkey {
+ status = "okay";
+};
+
&ssi2 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index f3404dd..cf62846 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -230,6 +230,8 @@
accelerometer@1c {
compatible = "fsl,mma8451";
reg = <0x1c>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mma8451_int>;
interrupt-parent = <&gpio6>;
interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
};
@@ -628,6 +630,12 @@
>;
};
+ pinctrl_mma8451_int: mma8451intgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0xb0b1
+ >;
+ };
+
pinctrl_pwm3: pwm1grp {
fsl,pins = <
MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index 89d29b5..91fc0a3 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -183,14 +183,12 @@
ov5640: camera@3c {
compatible = "ovti,ov5640";
- pinctrl-names = "default";
- pinctrl-0 = <&ov5640_pins>;
reg = <0x3c>;
clocks = <&clk_ext_camera>;
clock-names = "xclk";
DOVDD-supply = <&v2v8>;
- powerdown-gpios = <&stmfx_pinctrl 18 GPIO_ACTIVE_HIGH>;
- reset-gpios = <&stmfx_pinctrl 19 GPIO_ACTIVE_LOW>;
+ powerdown-gpios = <&stmfx_pinctrl 18 (GPIO_ACTIVE_HIGH | GPIO_PUSH_PULL)>;
+ reset-gpios = <&stmfx_pinctrl 19 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>;
rotation = <180>;
status = "okay";
@@ -223,15 +221,8 @@
joystick_pins: joystick {
pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4";
- drive-push-pull;
bias-pull-down;
};
-
- ov5640_pins: camera {
- pins = "agpio2", "agpio3"; /* stmfx pins 18 & 19 */
- drive-push-pull;
- output-low;
- };
};
};
};
diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
index 9b11654..f98e037 100644
--- a/arch/arm/boot/dts/stm32mp157c.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c.dtsi
@@ -932,7 +932,7 @@
interrupt-names = "int0", "int1";
clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
clock-names = "hclk", "cclk";
- bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
+ bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
status = "disabled";
};
@@ -945,7 +945,7 @@
interrupt-names = "int0", "int1";
clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
clock-names = "hclk", "cclk";
- bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
+ bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
index 568b90e..3bec3e0 100644
--- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
@@ -192,6 +192,7 @@
vqmmc-supply = <®_dldo1>;
non-removable;
wakeup-source;
+ keep-power-in-suspend;
status = "okay";
brcmf: wifi@1 {
diff --git a/arch/arm/mach-sunxi/mc_smp.c b/arch/arm/mach-sunxi/mc_smp.c
index 239084c..26cbce1 100644
--- a/arch/arm/mach-sunxi/mc_smp.c
+++ b/arch/arm/mach-sunxi/mc_smp.c
@@ -481,14 +481,18 @@
static int sunxi_cpu_powerdown(unsigned int cpu, unsigned int cluster)
{
u32 reg;
+ int gating_bit = cpu;
pr_debug("%s: cluster %u cpu %u\n", __func__, cluster, cpu);
if (cpu >= SUNXI_CPUS_PER_CLUSTER || cluster >= SUNXI_NR_CLUSTERS)
return -EINVAL;
+ if (is_a83t && cpu == 0)
+ gating_bit = 4;
+
/* gate processor power */
reg = readl(prcm_base + PRCM_PWROFF_GATING_REG(cluster));
- reg |= PRCM_PWROFF_GATING_REG_CORE(cpu);
+ reg |= PRCM_PWROFF_GATING_REG_CORE(gating_bit);
writel(reg, prcm_base + PRCM_PWROFF_GATING_REG(cluster));
udelay(20);
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index d98346d..078a501 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -127,7 +127,7 @@
status = "okay";
i2c-mux@77 {
- compatible = "nxp,pca9847";
+ compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 58b8cd0..23c8fad 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -394,7 +394,7 @@
};
sdma2: dma-controller@302c0000 {
- compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma";
+ compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
reg = <0x302c0000 0x10000>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_SDMA2_ROOT>,
@@ -405,7 +405,7 @@
};
sdma3: dma-controller@302b0000 {
- compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma";
+ compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
reg = <0x302b0000 0x10000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_SDMA3_ROOT>,
@@ -737,7 +737,7 @@
};
sdma1: dma-controller@30bd0000 {
- compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma";
+ compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
reg = <0x30bd0000 0x10000>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_SDMA1_ROOT>,
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 98496f5..43c4db3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -288,7 +288,7 @@
};
sdma3: dma-controller@302b0000 {
- compatible = "fsl,imx8mn-sdma", "fsl,imx7d-sdma";
+ compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma";
reg = <0x302b0000 0x10000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_SDMA3_ROOT>,
@@ -299,7 +299,7 @@
};
sdma2: dma-controller@302c0000 {
- compatible = "fsl,imx8mn-sdma", "fsl,imx7d-sdma";
+ compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma";
reg = <0x302c0000 0x10000>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_SDMA2_ROOT>,
@@ -612,7 +612,7 @@
};
sdma1: dma-controller@30bd0000 {
- compatible = "fsl,imx8mn-sdma", "fsl,imx7d-sdma";
+ compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma";
reg = <0x30bd0000 0x10000>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_SDMA1_ROOT>,
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
index 087b5b6..32ce149 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
@@ -88,7 +88,7 @@
regulator-name = "0V9_ARM";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1000000>;
- gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
states = <1000000 0x1
900000 0x0>;
regulator-always-on;
diff --git a/drivers/reset/core.c b/drivers/reset/core.c
index 213ff40..3c9a64c 100644
--- a/drivers/reset/core.c
+++ b/drivers/reset/core.c
@@ -76,7 +76,6 @@
* of_reset_simple_xlate - translate reset_spec to the reset line number
* @rcdev: a pointer to the reset controller device
* @reset_spec: reset line specifier as found in the device tree
- * @flags: a flags pointer to fill in (optional)
*
* This simple translation function should be used for reset controllers
* with 1:1 mapping, where reset lines can be indexed by number without gaps.
@@ -748,6 +747,7 @@
for (i = 0; i < resets->num_rstcs; i++)
__reset_control_put_internal(resets->rstc[i]);
mutex_unlock(&reset_list_mutex);
+ kfree(resets);
}
/**
@@ -825,9 +825,10 @@
}
EXPORT_SYMBOL_GPL(__device_reset);
-/**
+/*
* APIs to manage an array of reset controls.
*/
+
/**
* of_reset_control_get_count - Count number of resets available with a device
*
diff --git a/drivers/soc/imx/gpc.c b/drivers/soc/imx/gpc.c
index d9231bd..98b9d9a 100644
--- a/drivers/soc/imx/gpc.c
+++ b/drivers/soc/imx/gpc.c
@@ -249,13 +249,13 @@
};
static struct imx_pm_domain imx_gpc_domains[] = {
- [GPC_PGC_DOMAIN_ARM] {
+ [GPC_PGC_DOMAIN_ARM] = {
.base = {
.name = "ARM",
.flags = GENPD_FLAG_ALWAYS_ON,
},
},
- [GPC_PGC_DOMAIN_PU] {
+ [GPC_PGC_DOMAIN_PU] = {
.base = {
.name = "PU",
.power_off = imx6_pm_domain_power_off,
@@ -266,7 +266,7 @@
.reg_offs = 0x260,
.cntr_pdn_bit = 0,
},
- [GPC_PGC_DOMAIN_DISPLAY] {
+ [GPC_PGC_DOMAIN_DISPLAY] = {
.base = {
.name = "DISPLAY",
.power_off = imx6_pm_domain_power_off,
@@ -275,7 +275,7 @@
.reg_offs = 0x240,
.cntr_pdn_bit = 4,
},
- [GPC_PGC_DOMAIN_PCI] {
+ [GPC_PGC_DOMAIN_PCI] = {
.base = {
.name = "PCI",
.power_off = imx6_pm_domain_power_off,
diff --git a/include/linux/reset-controller.h b/include/linux/reset-controller.h
index 9326d67..eaae6b4 100644
--- a/include/linux/reset-controller.h
+++ b/include/linux/reset-controller.h
@@ -7,7 +7,7 @@
struct reset_controller_dev;
/**
- * struct reset_control_ops
+ * struct reset_control_ops - reset controller driver callbacks
*
* @reset: for self-deasserting resets, does all necessary
* things to reset the device
@@ -33,7 +33,7 @@
* @provider: name of the reset controller device controlling this reset line
* @index: ID of the reset controller in the reset controller device
* @dev_id: name of the device associated with this reset line
- * @con_id name of the reset line (can be NULL)
+ * @con_id: name of the reset line (can be NULL)
*/
struct reset_control_lookup {
struct list_head list;
diff --git a/include/linux/reset.h b/include/linux/reset.h
index e7793fc..eb597e8 100644
--- a/include/linux/reset.h
+++ b/include/linux/reset.h
@@ -143,7 +143,7 @@
* If this function is called more than once for the same reset_control it will
* return -EBUSY.
*
- * See reset_control_get_shared for details on shared references to
+ * See reset_control_get_shared() for details on shared references to
* reset-controls.
*
* Use of id names is optional.
