|  | // SPDX-License-Identifier: GPL-2.0+ | 
|  | /* | 
|  | * Intel OakTrail Platform support | 
|  | * | 
|  | * Copyright (C) 2010-2011 Intel Corporation | 
|  | * Author: Yin Kangkai (kangkai.yin@intel.com) | 
|  | * | 
|  | * based on Compal driver, Copyright (C) 2008 Cezary Jackiewicz | 
|  | * <cezary.jackiewicz (at) gmail.com>, based on MSI driver | 
|  | * Copyright (C) 2006 Lennart Poettering <mzxreary (at) 0pointer (dot) de> | 
|  | * | 
|  | * This driver does below things: | 
|  | * 1. registers itself in the Linux backlight control in | 
|  | *    /sys/class/backlight/intel_oaktrail/ | 
|  | * | 
|  | * 2. registers in the rfkill subsystem here: /sys/class/rfkill/rfkillX/ | 
|  | *    for these components: wifi, bluetooth, wwan (3g), gps | 
|  | * | 
|  | * This driver might work on other products based on Oaktrail. If you | 
|  | * want to try it you can pass force=1 as argument to the module which | 
|  | * will force it to load even when the DMI data doesn't identify the | 
|  | * product as compatible. | 
|  | */ | 
|  |  | 
|  | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | 
|  |  | 
|  | #include <linux/acpi.h> | 
|  | #include <linux/backlight.h> | 
|  | #include <linux/dmi.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/fb.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/mutex.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/rfkill.h> | 
|  |  | 
|  | #include <acpi/video.h> | 
|  |  | 
|  | #define DRIVER_NAME	"intel_oaktrail" | 
|  | #define DRIVER_VERSION	"0.4ac1" | 
|  |  | 
|  | /* | 
|  | * This is the devices status address in EC space, and the control bits | 
|  | * definition: | 
|  | * | 
|  | * (1 << 0):	Camera enable/disable, RW. | 
|  | * (1 << 1):	Bluetooth enable/disable, RW. | 
|  | * (1 << 2):	GPS enable/disable, RW. | 
|  | * (1 << 3):	WiFi enable/disable, RW. | 
|  | * (1 << 4):	WWAN (3G) enable/disable, RW. | 
|  | * (1 << 5):	Touchscreen enable/disable, Read Only. | 
|  | */ | 
|  | #define OT_EC_DEVICE_STATE_ADDRESS	0xD6 | 
|  |  | 
|  | #define OT_EC_CAMERA_MASK	(1 << 0) | 
|  | #define OT_EC_BT_MASK		(1 << 1) | 
|  | #define OT_EC_GPS_MASK		(1 << 2) | 
|  | #define OT_EC_WIFI_MASK		(1 << 3) | 
|  | #define OT_EC_WWAN_MASK		(1 << 4) | 
|  | #define OT_EC_TS_MASK		(1 << 5) | 
|  |  | 
|  | /* | 
|  | * This is the address in EC space and commands used to control LCD backlight: | 
|  | * | 
|  | * Two steps needed to change the LCD backlight: | 
|  | *   1. write the backlight percentage into OT_EC_BL_BRIGHTNESS_ADDRESS; | 
|  | *   2. write OT_EC_BL_CONTROL_ON_DATA into OT_EC_BL_CONTROL_ADDRESS. | 
|  | * | 
|  | * To read the LCD back light, just read out the value from | 
|  | * OT_EC_BL_BRIGHTNESS_ADDRESS. | 
|  | * | 
|  | * LCD backlight brightness range: 0 - 100 (OT_EC_BL_BRIGHTNESS_MAX) | 
|  | */ | 
|  | #define OT_EC_BL_BRIGHTNESS_ADDRESS	0x44 | 
|  | #define OT_EC_BL_BRIGHTNESS_MAX		100 | 
|  | #define OT_EC_BL_CONTROL_ADDRESS	0x3A | 
|  | #define OT_EC_BL_CONTROL_ON_DATA	0x1A | 
|  |  | 
|  |  | 
|  | static bool force; | 
|  | module_param(force, bool, 0); | 
|  | MODULE_PARM_DESC(force, "Force driver load, ignore DMI data"); | 
|  |  | 
|  | static struct platform_device *oaktrail_device; | 
|  | static struct backlight_device *oaktrail_bl_device; | 
|  | static struct rfkill *bt_rfkill; | 
|  | static struct rfkill *gps_rfkill; | 
|  | static struct rfkill *wifi_rfkill; | 
|  | static struct rfkill *wwan_rfkill; | 
|  |  | 
|  |  | 
|  | /* rfkill */ | 
|  | static int oaktrail_rfkill_set(void *data, bool blocked) | 
|  | { | 
|  | u8 value; | 
|  | u8 result; | 
|  | unsigned long radio = (unsigned long) data; | 
|  |  | 
|  | ec_read(OT_EC_DEVICE_STATE_ADDRESS, &result); | 
|  |  | 
|  | if (!blocked) | 
|  | value = (u8) (result | radio); | 
|  | else | 
|  | value = (u8) (result & ~radio); | 
|  |  | 
|  | ec_write(OT_EC_DEVICE_STATE_ADDRESS, value); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct rfkill_ops oaktrail_rfkill_ops = { | 
|  | .set_block = oaktrail_rfkill_set, | 
|  | }; | 
|  |  | 
|  | static struct rfkill *oaktrail_rfkill_new(char *name, enum rfkill_type type, | 
|  | unsigned long mask) | 
|  | { | 
|  | struct rfkill *rfkill_dev; | 
|  | u8 value; | 
|  | int err; | 
|  |  | 
|  | rfkill_dev = rfkill_alloc(name, &oaktrail_device->dev, type, | 
|  | &oaktrail_rfkill_ops, (void *)mask); | 
|  | if (!rfkill_dev) | 
|  | return ERR_PTR(-ENOMEM); | 
|  |  | 
|  | ec_read(OT_EC_DEVICE_STATE_ADDRESS, &value); | 
|  | rfkill_init_sw_state(rfkill_dev, (value & mask) != 1); | 
|  |  | 
|  | err = rfkill_register(rfkill_dev); | 
|  | if (err) { | 
|  | rfkill_destroy(rfkill_dev); | 
|  | return ERR_PTR(err); | 
|  | } | 
|  |  | 
|  | return rfkill_dev; | 
|  | } | 
|  |  | 
|  | static inline void __oaktrail_rfkill_cleanup(struct rfkill *rf) | 
|  | { | 
|  | if (rf) { | 
|  | rfkill_unregister(rf); | 
|  | rfkill_destroy(rf); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void oaktrail_rfkill_cleanup(void) | 
|  | { | 
|  | __oaktrail_rfkill_cleanup(wifi_rfkill); | 
|  | __oaktrail_rfkill_cleanup(bt_rfkill); | 
|  | __oaktrail_rfkill_cleanup(gps_rfkill); | 
|  | __oaktrail_rfkill_cleanup(wwan_rfkill); | 
|  | } | 
|  |  | 
|  | static int oaktrail_rfkill_init(void) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | wifi_rfkill = oaktrail_rfkill_new("oaktrail-wifi", | 
|  | RFKILL_TYPE_WLAN, | 
|  | OT_EC_WIFI_MASK); | 
|  | if (IS_ERR(wifi_rfkill)) { | 
|  | ret = PTR_ERR(wifi_rfkill); | 
|  | wifi_rfkill = NULL; | 
|  | goto cleanup; | 
|  | } | 
|  |  | 
|  | bt_rfkill = oaktrail_rfkill_new("oaktrail-bluetooth", | 
|  | RFKILL_TYPE_BLUETOOTH, | 
|  | OT_EC_BT_MASK); | 
|  | if (IS_ERR(bt_rfkill)) { | 
|  | ret = PTR_ERR(bt_rfkill); | 
|  | bt_rfkill = NULL; | 
|  | goto cleanup; | 
|  | } | 
|  |  | 
|  | gps_rfkill = oaktrail_rfkill_new("oaktrail-gps", | 
|  | RFKILL_TYPE_GPS, | 
|  | OT_EC_GPS_MASK); | 
|  | if (IS_ERR(gps_rfkill)) { | 
|  | ret = PTR_ERR(gps_rfkill); | 
|  | gps_rfkill = NULL; | 
|  | goto cleanup; | 
|  | } | 
|  |  | 
|  | wwan_rfkill = oaktrail_rfkill_new("oaktrail-wwan", | 
|  | RFKILL_TYPE_WWAN, | 
|  | OT_EC_WWAN_MASK); | 
|  | if (IS_ERR(wwan_rfkill)) { | 
|  | ret = PTR_ERR(wwan_rfkill); | 
|  | wwan_rfkill = NULL; | 
|  | goto cleanup; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | cleanup: | 
|  | oaktrail_rfkill_cleanup(); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* backlight */ | 
|  | static int get_backlight_brightness(struct backlight_device *b) | 
|  | { | 
|  | u8 value; | 
|  | ec_read(OT_EC_BL_BRIGHTNESS_ADDRESS, &value); | 
|  |  | 
|  | return value; | 
|  | } | 
|  |  | 
|  | static int set_backlight_brightness(struct backlight_device *b) | 
|  | { | 
|  | u8 percent = (u8) b->props.brightness; | 
|  | if (percent < 0 || percent > OT_EC_BL_BRIGHTNESS_MAX) | 
|  | return -EINVAL; | 
|  |  | 
|  | ec_write(OT_EC_BL_BRIGHTNESS_ADDRESS, percent); | 
|  | ec_write(OT_EC_BL_CONTROL_ADDRESS, OT_EC_BL_CONTROL_ON_DATA); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct backlight_ops oaktrail_bl_ops = { | 
|  | .get_brightness = get_backlight_brightness, | 
|  | .update_status	= set_backlight_brightness, | 
|  | }; | 
|  |  | 
|  | static int oaktrail_backlight_init(void) | 
|  | { | 
|  | struct backlight_device *bd; | 
|  | struct backlight_properties props; | 
|  |  | 
|  | memset(&props, 0, sizeof(struct backlight_properties)); | 
|  | props.type = BACKLIGHT_PLATFORM; | 
|  | props.max_brightness = OT_EC_BL_BRIGHTNESS_MAX; | 
|  | bd = backlight_device_register(DRIVER_NAME, | 
|  | &oaktrail_device->dev, NULL, | 
|  | &oaktrail_bl_ops, | 
|  | &props); | 
|  |  | 
|  | if (IS_ERR(bd)) { | 
|  | oaktrail_bl_device = NULL; | 
|  | pr_warn("Unable to register backlight device\n"); | 
|  | return PTR_ERR(bd); | 
|  | } | 
|  |  | 
|  | oaktrail_bl_device = bd; | 
|  |  | 
|  | bd->props.brightness = get_backlight_brightness(bd); | 
|  | bd->props.power = FB_BLANK_UNBLANK; | 
|  | backlight_update_status(bd); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void oaktrail_backlight_exit(void) | 
|  | { | 
|  | backlight_device_unregister(oaktrail_bl_device); | 
|  | } | 
|  |  | 
|  | static int oaktrail_probe(struct platform_device *pdev) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int oaktrail_remove(struct platform_device *pdev) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct platform_driver oaktrail_driver = { | 
|  | .driver = { | 
|  | .name = DRIVER_NAME, | 
|  | }, | 
|  | .probe	= oaktrail_probe, | 
|  | .remove	= oaktrail_remove, | 
|  | }; | 
|  |  | 
|  | static int dmi_check_cb(const struct dmi_system_id *id) | 
|  | { | 
|  | pr_info("Identified model '%s'\n", id->ident); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct dmi_system_id oaktrail_dmi_table[] __initconst = { | 
|  | { | 
|  | .ident = "OakTrail platform", | 
|  | .matches = { | 
|  | DMI_MATCH(DMI_PRODUCT_NAME, "OakTrail platform"), | 
|  | }, | 
|  | .callback = dmi_check_cb | 
|  | }, | 
|  | { } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(dmi, oaktrail_dmi_table); | 
|  |  | 
|  | static int __init oaktrail_init(void) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | if (acpi_disabled) { | 
|  | pr_err("ACPI needs to be enabled for this driver to work!\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | if (!force && !dmi_check_system(oaktrail_dmi_table)) { | 
|  | pr_err("Platform not recognized (You could try the module's force-parameter)"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | ret = platform_driver_register(&oaktrail_driver); | 
|  | if (ret) { | 
|  | pr_warn("Unable to register platform driver\n"); | 
|  | goto err_driver_reg; | 
|  | } | 
|  |  | 
|  | oaktrail_device = platform_device_alloc(DRIVER_NAME, -1); | 
|  | if (!oaktrail_device) { | 
|  | pr_warn("Unable to allocate platform device\n"); | 
|  | ret = -ENOMEM; | 
|  | goto err_device_alloc; | 
|  | } | 
|  |  | 
|  | ret = platform_device_add(oaktrail_device); | 
|  | if (ret) { | 
|  | pr_warn("Unable to add platform device\n"); | 
|  | goto err_device_add; | 
|  | } | 
|  |  | 
|  | if (acpi_video_get_backlight_type() == acpi_backlight_vendor) { | 
|  | ret = oaktrail_backlight_init(); | 
|  | if (ret) | 
|  | goto err_backlight; | 
|  | } | 
|  |  | 
|  | ret = oaktrail_rfkill_init(); | 
|  | if (ret) { | 
|  | pr_warn("Setup rfkill failed\n"); | 
|  | goto err_rfkill; | 
|  | } | 
|  |  | 
|  | pr_info("Driver "DRIVER_VERSION" successfully loaded\n"); | 
|  | return 0; | 
|  |  | 
|  | err_rfkill: | 
|  | oaktrail_backlight_exit(); | 
|  | err_backlight: | 
|  | platform_device_del(oaktrail_device); | 
|  | err_device_add: | 
|  | platform_device_put(oaktrail_device); | 
|  | err_device_alloc: | 
|  | platform_driver_unregister(&oaktrail_driver); | 
|  | err_driver_reg: | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void __exit oaktrail_cleanup(void) | 
|  | { | 
|  | oaktrail_backlight_exit(); | 
|  | oaktrail_rfkill_cleanup(); | 
|  | platform_device_unregister(oaktrail_device); | 
|  | platform_driver_unregister(&oaktrail_driver); | 
|  |  | 
|  | pr_info("Driver unloaded\n"); | 
|  | } | 
|  |  | 
|  | module_init(oaktrail_init); | 
|  | module_exit(oaktrail_cleanup); | 
|  |  | 
|  | MODULE_AUTHOR("Yin Kangkai (kangkai.yin@intel.com)"); | 
|  | MODULE_DESCRIPTION("Intel Oaktrail Platform ACPI Extras"); | 
|  | MODULE_VERSION(DRIVER_VERSION); | 
|  | MODULE_LICENSE("GPL"); |