merge-upstream/v5.4.155 from branch/tag: upstream/v5.4.155 into branch: main-R85-13310.B-cos-5.4
Changelog:
-------------------------------------------------------------
Al Viro (1):
csky: don't let sigreturn play with priveleged bits of status register
Aleksander Morgado (1):
USB: serial: qcserial: add EM9191 QDL support
Andy Shevchenko (2):
mei: me: add Ice Lake-N device id.
gpio: pca953x: Improve bias setting
Ard Biesheuvel (1):
efi/cper: use stack buffer for error record decoding
Arnd Bergmann (2):
cb710: avoid NULL pointer subtraction
ethernet: s2io: fix setting mac address during resume
Aya Levin (1):
net/mlx5e: Mutually exclude RX-FCS and RX-port-timestamp
Billy Tsai (1):
iio: adc: aspeed: set driver data when adc probe.
Borislav Petkov (1):
x86/Kconfig: Do not enable AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT automatically
Chris Packham (1):
watchdog: orion: use 0 for unset heartbeat
Christophe JAILLET (1):
iio: adc128s052: Fix the error handling path of 'adc128_probe()'
Colin Ian King (1):
drm/msm: Fix null pointer dereference on pointer edp
Cédric Le Goater (1):
powerpc/xive: Discard disabled interrupts in get_irqchip_state()
Dan Carpenter (6):
iio: ssp_sensors: add more range checking in ssp_parse_dataframe()
iio: ssp_sensors: fix error code in ssp_print_mcu_debug()
iio: dac: ti-dac5571: fix an error code in probe()
pata_legacy: fix a couple uninitialized variable bugs
drm/msm/dsi: Fix an error code in msm_dsi_modeset_init()
drm/msm/dsi: fix off by one in dsi_bus_clk_enable error handling
Daniele Palmas (1):
USB: serial: option: add Telit LE910Cx composition 0x1204
Eiichi Tsukata (1):
sctp: account stream padding length for reconf chunk
Filipe Manana (3):
btrfs: deal with errors when replaying dir entry during log replay
btrfs: deal with errors when adding inode reference during log replay
btrfs: check for error when looking up inode during dir entry replay
Greg Kroah-Hartman (1):
Linux 5.4.155
Guo Ren (1):
csky: Fixup regs.sr broken in ptrace
Halil Pasic (1):
virtio: write back F_VERSION_1 before validate
Hans Potsch (1):
EDAC/armada-xp: Fix output of uncorrectable error counter
Herve Codina (1):
net: stmmac: fix get_hw_feature() on old hardware
Hui Liu (1):
iio: mtk-auxadc: fix case IIO_CHAN_INFO_PROCESSED
Hui Wang (1):
ALSA: hda/realtek: Fix the mic type detection issue for ASUS G551JW
Ido Schimmel (1):
mlxsw: thermal: Fix out-of-bounds memory accesses
Jackie Liu (1):
acpi/arm64: fix next_platform_timer() section mismatch error
James Morse (1):
x86/resctrl: Free the ctrlval arrays when domain_setup_mon_state() fails
Jiri Valek - 2N (1):
iio: light: opt3001: Fixed timeout error when 0 lux
Jonas Hahnfeld (1):
ALSA: usb-audio: Add quirk for VF0770
Jonathan Bell (1):
xhci: guard accesses to ep_state in xhci_endpoint_reset()
Kailang Yang (1):
ALSA: hda/realtek - ALC236 headset MIC recording issue
Michael Cullen (1):
Input: xpad - add support for another USB ID of Nacon GC-100
Miklos Szeredi (1):
ovl: simplify file splice
Miquel Raynal (1):
usb: musb: dsps: Fix the probe error path
Nanyong Sun (1):
net: encx24j600: check error in devm_regmap_init_encx24j600
Nikolay Martynov (1):
xhci: Enable trust tx length quirk for Fresco FL11 USB controller
Pavankumar Kondeti (1):
xhci: Fix command ring pointer corruption while aborting a command
Qu Wenruo (1):
btrfs: unlock newly allocated extent buffer after error
Roberto Sassu (1):
s390: fix strrchr() implementation
Sebastian Andrzej Siewior (1):
mqprio: Correct stats in mqprio_dump_class_stats().
Shannon Nelson (1):
ionic: don't remove netdev->dev_addr when syncing uc list
Stephen Boyd (1):
nvmem: Fix shift-out-of-bound (UBSAN) with byte size cells
Steven Rostedt (1):
nds32/ftrace: Fix Error: invalid operands (*UND* and *UND* sections) for `^'
Takashi Iwai (1):
ALSA: seq: Fix a potential UAF by wrong private_free call order
Tomaz Solc (1):
USB: serial: option: add prod. id for Quectel EG91
Vadim Pasternak (1):
platform/mellanox: mlxreg-io: Fix argument base in kstrtou32() call
Vegard Nossum (4):
net: arc: select CRC32
net: korina: select CRC32
drm/panel: olimex-lcd-olinuxino: select CRC32
r8152: select CRC32 and CRYPTO/CRYPTO_HASH/CRYPTO_SHA256
Wang Hai (1):
ata: ahci_platform: fix null-ptr-deref in ahci_platform_enable_regulators()
Werner Sembach (2):
ALSA: hda/realtek: Complete partial device name to avoid ambiguity
ALSA: hda/realtek: Add quirk for Clevo X170KM-G
Yu-Tung Chang (1):
USB: serial: option: add Quectel EC200S-CN module support
Zhang Jianhua (1):
efi: Change down_interruptible() in virt_efi_reset_system() to down_trylock()
Ziyang Xuan (3):
nfc: fix error handling of nfc_proto_register()
NFC: digital: fix possible memory leak in digital_tg_listen_mdaa()
NFC: digital: fix possible memory leak in digital_in_send_sdd_req()
chongjiapeng (1):
qed: Fix missing error code in qed_slowpath_start()
BUG=b/203746002
TEST=tryjob, validation and K8s e2e
RELEASE_NOTE=Updated the Linux kernel to v5.4.155.
Signed-off-by: COS Kernel Merge Bot <cloud-image-merge-automation@prod.google.com>
Change-Id: I53ddb9f6c673589ead69c623b04081519ab4bf4a
diff --git a/Makefile b/Makefile
index d51547b..dcb0112 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
VERSION = 5
PATCHLEVEL = 4
-SUBLEVEL = 154
+SUBLEVEL = 155
EXTRAVERSION =
NAME = Kleptomaniac Octopus
diff --git a/arch/csky/kernel/ptrace.c b/arch/csky/kernel/ptrace.c
index 313623a..8851947 100644
--- a/arch/csky/kernel/ptrace.c
+++ b/arch/csky/kernel/ptrace.c
@@ -96,7 +96,8 @@
if (ret)
return ret;
- regs.sr = task_pt_regs(target)->sr;
+ /* BIT(0) of regs.sr is Condition Code/Carry bit */
+ regs.sr = (regs.sr & BIT(0)) | (task_pt_regs(target)->sr & ~BIT(0));
#ifdef CONFIG_CPU_HAS_HILO
regs.dcsr = task_pt_regs(target)->dcsr;
#endif
diff --git a/arch/csky/kernel/signal.c b/arch/csky/kernel/signal.c
index 9b1b7c0..63c2bbe 100644
--- a/arch/csky/kernel/signal.c
+++ b/arch/csky/kernel/signal.c
@@ -52,10 +52,14 @@
struct sigcontext __user *sc)
{
int err = 0;
+ unsigned long sr = regs->sr;
/* sc_pt_regs is structured the same as the start of pt_regs */
err |= __copy_from_user(regs, &sc->sc_pt_regs, sizeof(struct pt_regs));
+ /* BIT(0) of regs->sr is Condition Code/Carry bit */
+ regs->sr = (sr & ~1) | (regs->sr & 1);
+
/* Restore the floating-point state. */
err |= restore_fpu_state(sc);
diff --git a/arch/powerpc/sysdev/xive/common.c b/arch/powerpc/sysdev/xive/common.c
index 2d4c09a..d4467da 100644
--- a/arch/powerpc/sysdev/xive/common.c
+++ b/arch/powerpc/sysdev/xive/common.c
@@ -990,7 +990,8 @@
* interrupt to be inactive in that case.
*/
*state = (pq != XIVE_ESB_INVALID) && !xd->stale_p &&
- (xd->saved_p || !!(pq & XIVE_ESB_VAL_P));
+ (xd->saved_p || (!!(pq & XIVE_ESB_VAL_P) &&
+ !irqd_irq_disabled(data)));
return 0;
default:
return -EINVAL;
diff --git a/arch/s390/lib/string.c b/arch/s390/lib/string.c
index 0e30e6e..18fbbb6 100644
--- a/arch/s390/lib/string.c
+++ b/arch/s390/lib/string.c
@@ -246,14 +246,13 @@
#ifdef __HAVE_ARCH_STRRCHR
char *strrchr(const char *s, int c)
{
- size_t len = __strend(s) - s;
+ ssize_t len = __strend(s) - s;
- if (len)
- do {
- if (s[len] == (char) c)
- return (char *) s + len;
- } while (--len > 0);
- return NULL;
+ do {
+ if (s[len] == (char)c)
+ return (char *)s + len;
+ } while (--len >= 0);
+ return NULL;
}
EXPORT_SYMBOL(strrchr);
#endif
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 8c159043..c2a3ec3 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1541,7 +1541,6 @@
config AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT
bool "Activate AMD Secure Memory Encryption (SME) by default"
- default y
depends on AMD_MEM_ENCRYPT
---help---
Say yes to have system memory encrypted by default if running on
diff --git a/arch/x86/kernel/cpu/resctrl/core.c b/arch/x86/kernel/cpu/resctrl/core.c
index 87a34b6..130c3c7 100644
--- a/arch/x86/kernel/cpu/resctrl/core.c
+++ b/arch/x86/kernel/cpu/resctrl/core.c
@@ -588,6 +588,8 @@
}
if (r->mon_capable && domain_setup_mon_state(r, d)) {
+ kfree(d->ctrl_val);
+ kfree(d->mbps_val);
kfree(d);
return;
}
diff --git a/drivers/acpi/arm64/gtdt.c b/drivers/acpi/arm64/gtdt.c
index 7d7497b..311419d 100644
--- a/drivers/acpi/arm64/gtdt.c
+++ b/drivers/acpi/arm64/gtdt.c
@@ -36,7 +36,7 @@
static struct acpi_gtdt_descriptor acpi_gtdt_desc __initdata;
-static inline void *next_platform_timer(void *platform_timer)
+static inline __init void *next_platform_timer(void *platform_timer)
{
struct acpi_gtdt_header *gh = platform_timer;
diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c
index 416cfbf..8a963d2 100644
--- a/drivers/ata/libahci_platform.c
+++ b/drivers/ata/libahci_platform.c
@@ -440,10 +440,7 @@
hpriv->phy_regulator = devm_regulator_get(dev, "phy");
if (IS_ERR(hpriv->phy_regulator)) {
rc = PTR_ERR(hpriv->phy_regulator);
- if (rc == -EPROBE_DEFER)
- goto err_out;
- rc = 0;
- hpriv->phy_regulator = NULL;
+ goto err_out;
}
if (flags & AHCI_PLATFORM_GET_RESETS) {
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index 4fd12b2..d91ba47 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -315,7 +315,8 @@
iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
if (unlikely(slop)) {
- __le32 pad;
+ __le32 pad = 0;
+
if (rw == READ) {
pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr));
memcpy(buf + buflen - slop, &pad, slop);
@@ -705,7 +706,8 @@
ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
if (unlikely(slop)) {
- __le32 pad;
+ __le32 pad = 0;
+
if (rw == WRITE) {
memcpy(&pad, buf + buflen - slop, slop);
iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr);
diff --git a/drivers/edac/armada_xp_edac.c b/drivers/edac/armada_xp_edac.c
index 7f227bd..8c63447 100644
--- a/drivers/edac/armada_xp_edac.c
+++ b/drivers/edac/armada_xp_edac.c
@@ -178,7 +178,7 @@
"details unavailable (multiple errors)");
if (cnt_dbe)
edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci,
- cnt_sbe, /* error count */
+ cnt_dbe, /* error count */
0, 0, 0, /* pfn, offset, syndrome */
-1, -1, -1, /* top, mid, low layer */
mci->ctl_name,
diff --git a/drivers/firmware/efi/cper.c b/drivers/firmware/efi/cper.c
index e482986..6157038 100644
--- a/drivers/firmware/efi/cper.c
+++ b/drivers/firmware/efi/cper.c
@@ -25,8 +25,6 @@
#include <acpi/ghes.h>
#include <ras/ras_event.h>
-static char rcd_decode_str[CPER_REC_LEN];
-
/*
* CPER record ID need to be unique even after reboot, because record
* ID is used as index for ERST storage, while CPER records from
@@ -299,6 +297,7 @@
struct cper_mem_err_compact *cmem)
{
const char *ret = trace_seq_buffer_ptr(p);
+ char rcd_decode_str[CPER_REC_LEN];
if (cper_mem_err_location(cmem, rcd_decode_str))
trace_seq_printf(p, "%s", rcd_decode_str);
@@ -313,6 +312,7 @@
int len)
{
struct cper_mem_err_compact cmem;
+ char rcd_decode_str[CPER_REC_LEN];
/* Don't trust UEFI 2.1/2.2 structure with bad validation bits */
if (len == sizeof(struct cper_sec_mem_err_old) &&
diff --git a/drivers/firmware/efi/runtime-wrappers.c b/drivers/firmware/efi/runtime-wrappers.c
index 65fffaa..136b9c7f 100644
--- a/drivers/firmware/efi/runtime-wrappers.c
+++ b/drivers/firmware/efi/runtime-wrappers.c
@@ -414,7 +414,7 @@
unsigned long data_size,
efi_char16_t *data)
{
- if (down_interruptible(&efi_runtime_lock)) {
+ if (down_trylock(&efi_runtime_lock)) {
pr_warn("failed to invoke the reset_system() runtime service:\n"
"could not get exclusive access to the firmware\n");
return;
diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index d9193ff..54da66d0 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -583,21 +583,21 @@
mutex_lock(&chip->i2c_lock);
- /* Disable pull-up/pull-down */
- ret = regmap_write_bits(chip->regmap, pull_en_reg, bit, 0);
- if (ret)
- goto exit;
-
/* Configure pull-up/pull-down */
if (config == PIN_CONFIG_BIAS_PULL_UP)
ret = regmap_write_bits(chip->regmap, pull_sel_reg, bit, bit);
else if (config == PIN_CONFIG_BIAS_PULL_DOWN)
ret = regmap_write_bits(chip->regmap, pull_sel_reg, bit, 0);
+ else
+ ret = 0;
if (ret)
goto exit;
- /* Enable pull-up/pull-down */
- ret = regmap_write_bits(chip->regmap, pull_en_reg, bit, bit);
+ /* Disable/Enable pull-up/pull-down */
+ if (config == PIN_CONFIG_BIAS_DISABLE)
+ ret = regmap_write_bits(chip->regmap, pull_en_reg, bit, 0);
+ else
+ ret = regmap_write_bits(chip->regmap, pull_en_reg, bit, bit);
exit:
mutex_unlock(&chip->i2c_lock);
@@ -611,7 +611,9 @@
switch (pinconf_to_config_param(config)) {
case PIN_CONFIG_BIAS_PULL_UP:
+ case PIN_CONFIG_BIAS_PULL_PIN_DEFAULT:
case PIN_CONFIG_BIAS_PULL_DOWN:
+ case PIN_CONFIG_BIAS_DISABLE:
return pca953x_gpio_set_pull_up_down(chip, offset, config);
default:
return -ENOTSUPP;
diff --git a/drivers/gpu/drm/msm/dsi/dsi.c b/drivers/gpu/drm/msm/dsi/dsi.c
index 0d37ae5..a11b98e 100644
--- a/drivers/gpu/drm/msm/dsi/dsi.c
+++ b/drivers/gpu/drm/msm/dsi/dsi.c
@@ -206,8 +206,10 @@
goto fail;
}
- if (!msm_dsi_manager_validate_current_config(msm_dsi->id))
+ if (!msm_dsi_manager_validate_current_config(msm_dsi->id)) {
+ ret = -EINVAL;
goto fail;
+ }
msm_dsi->encoder = encoder;
diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index 1e7b1be..5613234 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -460,7 +460,7 @@
return 0;
err:
- for (; i > 0; i--)
+ while (--i >= 0)
clk_disable_unprepare(msm_host->bus_clks[i]);
return ret;
diff --git a/drivers/gpu/drm/msm/edp/edp_ctrl.c b/drivers/gpu/drm/msm/edp/edp_ctrl.c
index 7f3dd3f..bbbd96f 100644
--- a/drivers/gpu/drm/msm/edp/edp_ctrl.c
+++ b/drivers/gpu/drm/msm/edp/edp_ctrl.c
@@ -1082,7 +1082,7 @@
int msm_edp_ctrl_init(struct msm_edp *edp)
{
struct edp_ctrl *ctrl = NULL;
- struct device *dev = &edp->pdev->dev;
+ struct device *dev;
int ret;
if (!edp) {
@@ -1090,6 +1090,7 @@
return -EINVAL;
}
+ dev = &edp->pdev->dev;
ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
if (!ctrl)
return -ENOMEM;
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index f152bc4..e70ccad 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -141,6 +141,7 @@
depends on OF
depends on I2C
depends on BACKLIGHT_CLASS_DEVICE
+ select CRC32
help
The panel is used with different sizes LCDs, from 480x272 to
1280x800, and 24 bit per pixel.
diff --git a/drivers/iio/adc/aspeed_adc.c b/drivers/iio/adc/aspeed_adc.c
index d3fc39d..552baf32 100644
--- a/drivers/iio/adc/aspeed_adc.c
+++ b/drivers/iio/adc/aspeed_adc.c
@@ -184,6 +184,7 @@
data = iio_priv(indio_dev);
data->dev = &pdev->dev;
+ platform_set_drvdata(pdev, indio_dev);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
data->base = devm_ioremap_resource(&pdev->dev, res);
diff --git a/drivers/iio/adc/mt6577_auxadc.c b/drivers/iio/adc/mt6577_auxadc.c
index 2449d91..9cdb908 100644
--- a/drivers/iio/adc/mt6577_auxadc.c
+++ b/drivers/iio/adc/mt6577_auxadc.c
@@ -82,6 +82,10 @@
MT6577_AUXADC_CHANNEL(15),
};
+/* For Voltage calculation */
+#define VOLTAGE_FULL_RANGE 1500 /* VA voltage */
+#define AUXADC_PRECISE 4096 /* 12 bits */
+
static int mt_auxadc_get_cali_data(int rawdata, bool enable_cali)
{
return rawdata;
@@ -191,6 +195,10 @@
}
if (adc_dev->dev_comp->sample_data_cali)
*val = mt_auxadc_get_cali_data(*val, true);
+
+ /* Convert adc raw data to voltage: 0 - 1500 mV */
+ *val = *val * VOLTAGE_FULL_RANGE / AUXADC_PRECISE;
+
return IIO_VAL_INT;
default:
diff --git a/drivers/iio/adc/ti-adc128s052.c b/drivers/iio/adc/ti-adc128s052.c
index 1e5a936..4267d75 100644
--- a/drivers/iio/adc/ti-adc128s052.c
+++ b/drivers/iio/adc/ti-adc128s052.c
@@ -172,7 +172,13 @@
mutex_init(&adc->lock);
ret = iio_device_register(indio_dev);
+ if (ret)
+ goto err_disable_regulator;
+ return 0;
+
+err_disable_regulator:
+ regulator_disable(adc->reg);
return ret;
}
diff --git a/drivers/iio/common/ssp_sensors/ssp_spi.c b/drivers/iio/common/ssp_sensors/ssp_spi.c
index 7db3d58..d98e0a0 100644
--- a/drivers/iio/common/ssp_sensors/ssp_spi.c
+++ b/drivers/iio/common/ssp_sensors/ssp_spi.c
@@ -137,7 +137,7 @@
if (length > received_len - *data_index || length <= 0) {
ssp_dbg("[SSP]: MSG From MCU-invalid debug length(%d/%d)\n",
length, received_len);
- return length ? length : -EPROTO;
+ return -EPROTO;
}
ssp_dbg("[SSP]: MSG From MCU - %s\n", &data_frame[*data_index]);
@@ -273,6 +273,8 @@
for (idx = 0; idx < len;) {
switch (dataframe[idx++]) {
case SSP_MSG2AP_INST_BYPASS_DATA:
+ if (idx >= len)
+ return -EPROTO;
sd = dataframe[idx++];
if (sd < 0 || sd >= SSP_SENSOR_MAX) {
dev_err(SSP_DEV,
@@ -282,10 +284,13 @@
if (indio_devs[sd]) {
spd = iio_priv(indio_devs[sd]);
- if (spd->process_data)
+ if (spd->process_data) {
+ if (idx >= len)
+ return -EPROTO;
spd->process_data(indio_devs[sd],
&dataframe[idx],
data->timestamp);
+ }
} else {
dev_err(SSP_DEV, "no client for frame\n");
}
@@ -293,6 +298,8 @@
idx += ssp_offset_map[sd];
break;
case SSP_MSG2AP_INST_DEBUG_DATA:
+ if (idx >= len)
+ return -EPROTO;
sd = ssp_print_mcu_debug(dataframe, &idx, len);
if (sd) {
dev_err(SSP_DEV,
diff --git a/drivers/iio/dac/ti-dac5571.c b/drivers/iio/dac/ti-dac5571.c
index 3a2bb0e..51c41ccf 100644
--- a/drivers/iio/dac/ti-dac5571.c
+++ b/drivers/iio/dac/ti-dac5571.c
@@ -352,6 +352,7 @@
data->dac5571_pwrdwn = dac5571_pwrdwn_quad;
break;
default:
+ ret = -EINVAL;
goto err;
}
diff --git a/drivers/iio/light/opt3001.c b/drivers/iio/light/opt3001.c
index 92004a25..5588066 100644
--- a/drivers/iio/light/opt3001.c
+++ b/drivers/iio/light/opt3001.c
@@ -275,6 +275,8 @@
ret = wait_event_timeout(opt->result_ready_queue,
opt->result_ready,
msecs_to_jiffies(OPT3001_RESULT_READY_LONG));
+ if (ret == 0)
+ return -ETIMEDOUT;
} else {
/* Sleep for result ready time */
timeout = (opt->int_time == OPT3001_INT_TIME_SHORT) ?
@@ -311,9 +313,7 @@
/* Disallow IRQ to access the device while lock is active */
opt->ok_to_ignore_lock = false;
- if (ret == 0)
- return -ETIMEDOUT;
- else if (ret < 0)
+ if (ret < 0)
return ret;
if (opt->use_irq) {
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index e5f1e3c..ba101af 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -331,6 +331,7 @@
{ 0x24c6, 0x5b03, "Thrustmaster Ferrari 458 Racing Wheel", 0, XTYPE_XBOX360 },
{ 0x24c6, 0x5d04, "Razer Sabertooth", 0, XTYPE_XBOX360 },
{ 0x24c6, 0xfafe, "Rock Candy Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
+ { 0x3285, 0x0607, "Nacon GC-100", 0, XTYPE_XBOX360 },
{ 0x3767, 0x0101, "Fanatec Speedster 3 Forceshock Wheel", 0, XTYPE_XBOX },
{ 0xffff, 0xffff, "Chinese-made Xbox Controller", 0, XTYPE_XBOX },
{ 0x0000, 0x0000, "Generic X-Box pad", 0, XTYPE_UNKNOWN }
@@ -447,6 +448,7 @@
XPAD_XBOXONE_VENDOR(0x24c6), /* PowerA Controllers */
XPAD_XBOXONE_VENDOR(0x2e24), /* Hyperkin Duke X-Box One pad */
XPAD_XBOX360_VENDOR(0x2f24), /* GameSir Controllers */
+ XPAD_XBOX360_VENDOR(0x3285), /* Nacon GC-100 */
{ }
};
diff --git a/drivers/misc/cb710/sgbuf2.c b/drivers/misc/cb710/sgbuf2.c
index dfd2969..d52e079 100644
--- a/drivers/misc/cb710/sgbuf2.c
+++ b/drivers/misc/cb710/sgbuf2.c
@@ -47,7 +47,7 @@
#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
return false;
#else
- return ((ptr - NULL) & 3) != 0;
+ return ((uintptr_t)ptr & 3) != 0;
#endif
}
diff --git a/drivers/misc/mei/hw-me-regs.h b/drivers/misc/mei/hw-me-regs.h
index e56dc47..556133d 100644
--- a/drivers/misc/mei/hw-me-regs.h
+++ b/drivers/misc/mei/hw-me-regs.h
@@ -90,6 +90,7 @@
#define MEI_DEV_ID_CDF 0x18D3 /* Cedar Fork */
#define MEI_DEV_ID_ICP_LP 0x34E0 /* Ice Lake Point LP */
+#define MEI_DEV_ID_ICP_N 0x38E0 /* Ice Lake Point N */
#define MEI_DEV_ID_TGP_LP 0xA0E0 /* Tiger Lake Point LP */
diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c
index 75ab2ff..d7233f2 100644
--- a/drivers/misc/mei/pci-me.c
+++ b/drivers/misc/mei/pci-me.c
@@ -103,6 +103,7 @@
{MEI_PCI_DEVICE(MEI_DEV_ID_CMP_H_3, MEI_ME_PCH8_CFG)},
{MEI_PCI_DEVICE(MEI_DEV_ID_ICP_LP, MEI_ME_PCH12_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_ICP_N, MEI_ME_PCH12_CFG)},
{MEI_PCI_DEVICE(MEI_DEV_ID_TGP_LP, MEI_ME_PCH12_CFG)},
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index e8e9c16..2d4eb2f 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -100,6 +100,7 @@
config KORINA
tristate "Korina (IDT RC32434) Ethernet support"
depends on MIKROTIK_RB532
+ select CRC32
---help---
If you have a Mikrotik RouterBoard 500 or IDT RC32434
based system say Y. Otherwise say N.
diff --git a/drivers/net/ethernet/arc/Kconfig b/drivers/net/ethernet/arc/Kconfig
index 45c663d..2cd0e45 100644
--- a/drivers/net/ethernet/arc/Kconfig
+++ b/drivers/net/ethernet/arc/Kconfig
@@ -21,6 +21,7 @@
depends on ARC || ARCH_ROCKCHIP || COMPILE_TEST
select MII
select PHYLIB
+ select CRC32
config ARC_EMAC
tristate "ARC EMAC support"
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index 24c49a8..5f4f0f6 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -3805,20 +3805,67 @@
return mlx5_set_port_fcs(mdev, !enable);
}
+static int mlx5e_set_rx_port_ts(struct mlx5_core_dev *mdev, bool enable)
+{
+ u32 in[MLX5_ST_SZ_DW(pcmr_reg)] = {};
+ bool supported, curr_state;
+ int err;
+
+ if (!MLX5_CAP_GEN(mdev, ports_check))
+ return 0;
+
+ err = mlx5_query_ports_check(mdev, in, sizeof(in));
+ if (err)
+ return err;
+
+ supported = MLX5_GET(pcmr_reg, in, rx_ts_over_crc_cap);
+ curr_state = MLX5_GET(pcmr_reg, in, rx_ts_over_crc);
+
+ if (!supported || enable == curr_state)
+ return 0;
+
+ MLX5_SET(pcmr_reg, in, local_port, 1);
+ MLX5_SET(pcmr_reg, in, rx_ts_over_crc, enable);
+
+ return mlx5_set_ports_check(mdev, in, sizeof(in));
+}
+
static int set_feature_rx_fcs(struct net_device *netdev, bool enable)
{
struct mlx5e_priv *priv = netdev_priv(netdev);
+ struct mlx5e_channels *chs = &priv->channels;
+ struct mlx5_core_dev *mdev = priv->mdev;
int err;
mutex_lock(&priv->state_lock);
- priv->channels.params.scatter_fcs_en = enable;
- err = mlx5e_modify_channels_scatter_fcs(&priv->channels, enable);
- if (err)
- priv->channels.params.scatter_fcs_en = !enable;
+ if (enable) {
+ err = mlx5e_set_rx_port_ts(mdev, false);
+ if (err)
+ goto out;
+ chs->params.scatter_fcs_en = true;
+ err = mlx5e_modify_channels_scatter_fcs(chs, true);
+ if (err) {
+ chs->params.scatter_fcs_en = false;
+ mlx5e_set_rx_port_ts(mdev, true);
+ }
+ } else {
+ chs->params.scatter_fcs_en = false;
+ err = mlx5e_modify_channels_scatter_fcs(chs, false);
+ if (err) {
+ chs->params.scatter_fcs_en = true;
+ goto out;
+ }
+ err = mlx5e_set_rx_port_ts(mdev, true);
+ if (err) {
+ mlx5_core_warn(mdev, "Failed to set RX port timestamp %d\n", err);
+ err = 0;
+ }
+ }
+
+out:
mutex_unlock(&priv->state_lock);
-
return err;
}
diff --git a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
index c3fc1cc..882ea12 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
@@ -25,16 +25,8 @@
#define MLXSW_THERMAL_ZONE_MAX_NAME 16
#define MLXSW_THERMAL_TEMP_SCORE_MAX GENMASK(31, 0)
#define MLXSW_THERMAL_MAX_STATE 10
+#define MLXSW_THERMAL_MIN_STATE 2
#define MLXSW_THERMAL_MAX_DUTY 255
-/* Minimum and maximum fan allowed speed in percent: from 20% to 100%. Values
- * MLXSW_THERMAL_MAX_STATE + x, where x is between 2 and 10 are used for
- * setting fan speed dynamic minimum. For example, if value is set to 14 (40%)
- * cooling levels vector will be set to 4, 4, 4, 4, 4, 5, 6, 7, 8, 9, 10 to
- * introduce PWM speed in percent: 40, 40, 40, 40, 40, 50, 60. 70, 80, 90, 100.
- */
-#define MLXSW_THERMAL_SPEED_MIN (MLXSW_THERMAL_MAX_STATE + 2)
-#define MLXSW_THERMAL_SPEED_MAX (MLXSW_THERMAL_MAX_STATE * 2)
-#define MLXSW_THERMAL_SPEED_MIN_LEVEL 2 /* 20% */
/* External cooling devices, allowed for binding to mlxsw thermal zones. */
static char * const mlxsw_thermal_external_allowed_cdev[] = {
@@ -703,49 +695,16 @@
struct mlxsw_thermal *thermal = cdev->devdata;
struct device *dev = thermal->bus_info->dev;
char mfsc_pl[MLXSW_REG_MFSC_LEN];
- unsigned long cur_state, i;
int idx;
- u8 duty;
int err;
+ if (state > MLXSW_THERMAL_MAX_STATE)
+ return -EINVAL;
+
idx = mlxsw_get_cooling_device_idx(thermal, cdev);
if (idx < 0)
return idx;
- /* Verify if this request is for changing allowed fan dynamical
- * minimum. If it is - update cooling levels accordingly and update
- * state, if current state is below the newly requested minimum state.
- * For example, if current state is 5, and minimal state is to be
- * changed from 4 to 6, thermal->cooling_levels[0 to 5] will be changed
- * all from 4 to 6. And state 5 (thermal->cooling_levels[4]) should be
- * overwritten.
- */
- if (state >= MLXSW_THERMAL_SPEED_MIN &&
- state <= MLXSW_THERMAL_SPEED_MAX) {
- state -= MLXSW_THERMAL_MAX_STATE;
- for (i = 0; i <= MLXSW_THERMAL_MAX_STATE; i++)
- thermal->cooling_levels[i] = max(state, i);
-
- mlxsw_reg_mfsc_pack(mfsc_pl, idx, 0);
- err = mlxsw_reg_query(thermal->core, MLXSW_REG(mfsc), mfsc_pl);
- if (err)
- return err;
-
- duty = mlxsw_reg_mfsc_pwm_duty_cycle_get(mfsc_pl);
- cur_state = mlxsw_duty_to_state(duty);
-
- /* If current fan state is lower than requested dynamical
- * minimum, increase fan speed up to dynamical minimum.
- */
- if (state < cur_state)
- return 0;
-
- state = cur_state;
- }
-
- if (state > MLXSW_THERMAL_MAX_STATE)
- return -EINVAL;
-
/* Normalize the state to the valid speed range. */
state = thermal->cooling_levels[state];
mlxsw_reg_mfsc_pack(mfsc_pl, idx, mlxsw_state_to_duty(state));
@@ -1040,8 +999,7 @@
/* Initialize cooling levels per PWM state. */
for (i = 0; i < MLXSW_THERMAL_MAX_STATE; i++)
- thermal->cooling_levels[i] = max(MLXSW_THERMAL_SPEED_MIN_LEVEL,
- i);
+ thermal->cooling_levels[i] = max(MLXSW_THERMAL_MIN_STATE, i);
thermal->polling_delay = bus_info->low_frequency ?
MLXSW_THERMAL_SLOW_POLL_INT :
diff --git a/drivers/net/ethernet/microchip/encx24j600-regmap.c b/drivers/net/ethernet/microchip/encx24j600-regmap.c
index 1f496fa..e252863 100644
--- a/drivers/net/ethernet/microchip/encx24j600-regmap.c
+++ b/drivers/net/ethernet/microchip/encx24j600-regmap.c
@@ -502,13 +502,19 @@
.reg_read = regmap_encx24j600_phy_reg_read,
};
-void devm_regmap_init_encx24j600(struct device *dev,
- struct encx24j600_context *ctx)
+int devm_regmap_init_encx24j600(struct device *dev,
+ struct encx24j600_context *ctx)
{
mutex_init(&ctx->mutex);
regcfg.lock_arg = ctx;
ctx->regmap = devm_regmap_init(dev, ®map_encx24j600, ctx, ®cfg);
+ if (IS_ERR(ctx->regmap))
+ return PTR_ERR(ctx->regmap);
ctx->phymap = devm_regmap_init(dev, &phymap_encx24j600, ctx, &phycfg);
+ if (IS_ERR(ctx->phymap))
+ return PTR_ERR(ctx->phymap);
+
+ return 0;
}
EXPORT_SYMBOL_GPL(devm_regmap_init_encx24j600);
diff --git a/drivers/net/ethernet/microchip/encx24j600.c b/drivers/net/ethernet/microchip/encx24j600.c
index c3a6edc..6b43afc 100644
--- a/drivers/net/ethernet/microchip/encx24j600.c
+++ b/drivers/net/ethernet/microchip/encx24j600.c
@@ -1027,10 +1027,13 @@
priv->speed = SPEED_100;
priv->ctx.spi = spi;
- devm_regmap_init_encx24j600(&spi->dev, &priv->ctx);
ndev->irq = spi->irq;
ndev->netdev_ops = &encx24j600_netdev_ops;
+ ret = devm_regmap_init_encx24j600(&spi->dev, &priv->ctx);
+ if (ret)
+ goto out_free;
+
mutex_init(&priv->lock);
/* Reset device and check if it is connected */
diff --git a/drivers/net/ethernet/microchip/encx24j600_hw.h b/drivers/net/ethernet/microchip/encx24j600_hw.h
index f604a26..711147a 100644
--- a/drivers/net/ethernet/microchip/encx24j600_hw.h
+++ b/drivers/net/ethernet/microchip/encx24j600_hw.h
@@ -15,8 +15,8 @@
int bank;
};
-void devm_regmap_init_encx24j600(struct device *dev,
- struct encx24j600_context *ctx);
+int devm_regmap_init_encx24j600(struct device *dev,
+ struct encx24j600_context *ctx);
/* Single-byte instructions */
#define BANK_SELECT(bank) (0xC0 | ((bank & (BANK_MASK >> BANK_SHIFT)) << 1))
diff --git a/drivers/net/ethernet/neterion/s2io.c b/drivers/net/ethernet/neterion/s2io.c
index e0b2bf3..71ab4e9 100644
--- a/drivers/net/ethernet/neterion/s2io.c
+++ b/drivers/net/ethernet/neterion/s2io.c
@@ -8565,7 +8565,7 @@
return;
}
- if (s2io_set_mac_addr(netdev, netdev->dev_addr) == FAILURE) {
+ if (do_s2io_prog_unicast(netdev, netdev->dev_addr) == FAILURE) {
s2io_card_down(sp);
pr_err("Can't restore mac addr after reset.\n");
return;
diff --git a/drivers/net/ethernet/pensando/ionic/ionic_lif.c b/drivers/net/ethernet/pensando/ionic/ionic_lif.c
index e660022..99ba355 100644
--- a/drivers/net/ethernet/pensando/ionic/ionic_lif.c
+++ b/drivers/net/ethernet/pensando/ionic/ionic_lif.c
@@ -912,6 +912,10 @@
static int ionic_addr_del(struct net_device *netdev, const u8 *addr)
{
+ /* Don't delete our own address from the uc list */
+ if (ether_addr_equal(addr, netdev->dev_addr))
+ return 0;
+
return ionic_lif_addr(netdev_priv(netdev), addr, false);
}
diff --git a/drivers/net/ethernet/qlogic/qed/qed_main.c b/drivers/net/ethernet/qlogic/qed/qed_main.c
index 1db4942..1cbcc27 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_main.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_main.c
@@ -1238,6 +1238,7 @@
} else {
DP_NOTICE(cdev,
"Failed to acquire PTT for aRFS\n");
+ rc = -EINVAL;
goto err;
}
}
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
index 2bac49b..fbf2dea 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
@@ -218,11 +218,18 @@
readl(ioaddr + DMA_BUS_MODE + i * 4);
}
-static void dwmac1000_get_hw_feature(void __iomem *ioaddr,
- struct dma_features *dma_cap)
+static int dwmac1000_get_hw_feature(void __iomem *ioaddr,
+ struct dma_features *dma_cap)
{
u32 hw_cap = readl(ioaddr + DMA_HW_FEATURE);
+ if (!hw_cap) {
+ /* 0x00000000 is the value read on old hardware that does not
+ * implement this register
+ */
+ return -EOPNOTSUPP;
+ }
+
dma_cap->mbps_10_100 = (hw_cap & DMA_HW_FEAT_MIISEL);
dma_cap->mbps_1000 = (hw_cap & DMA_HW_FEAT_GMIISEL) >> 1;
dma_cap->half_duplex = (hw_cap & DMA_HW_FEAT_HDSEL) >> 2;
@@ -252,6 +259,8 @@
dma_cap->number_tx_channel = (hw_cap & DMA_HW_FEAT_TXCHCNT) >> 22;
/* Alternate (enhanced) DESC mode */
dma_cap->enh_desc = (hw_cap & DMA_HW_FEAT_ENHDESSEL) >> 24;
+
+ return 0;
}
static void dwmac1000_rx_watchdog(void __iomem *ioaddr, u32 riwt,
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
index 0d993f4..ae473d8 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
@@ -336,8 +336,8 @@
writel(mtl_tx_op, ioaddr + MTL_CHAN_TX_OP_MODE(channel));
}
-static void dwmac4_get_hw_feature(void __iomem *ioaddr,
- struct dma_features *dma_cap)
+static int dwmac4_get_hw_feature(void __iomem *ioaddr,
+ struct dma_features *dma_cap)
{
u32 hw_cap = readl(ioaddr + GMAC_HW_FEATURE0);
@@ -400,6 +400,8 @@
dma_cap->frpbs = (hw_cap & GMAC_HW_FEAT_FRPBS) >> 11;
dma_cap->frpsel = (hw_cap & GMAC_HW_FEAT_FRPSEL) >> 10;
dma_cap->dvlan = (hw_cap & GMAC_HW_FEAT_DVLAN) >> 5;
+
+ return 0;
}
/* Enable/disable TSO feature and set MSS */
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
index 4af7271..07ef0ac 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
@@ -356,8 +356,8 @@
return ret;
}
-static void dwxgmac2_get_hw_feature(void __iomem *ioaddr,
- struct dma_features *dma_cap)
+static int dwxgmac2_get_hw_feature(void __iomem *ioaddr,
+ struct dma_features *dma_cap)
{
u32 hw_cap;
@@ -425,6 +425,8 @@
dma_cap->frpes = (hw_cap & XGMAC_HWFEAT_FRPES) >> 11;
dma_cap->frpbs = (hw_cap & XGMAC_HWFEAT_FRPPB) >> 9;
dma_cap->frpsel = (hw_cap & XGMAC_HWFEAT_FRPSEL) >> 3;
+
+ return 0;
}
static void dwxgmac2_rx_watchdog(void __iomem *ioaddr, u32 riwt, u32 nchan)
diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.h b/drivers/net/ethernet/stmicro/stmmac/hwif.h
index 9010d88..59a1d8c 100644
--- a/drivers/net/ethernet/stmicro/stmmac/hwif.h
+++ b/drivers/net/ethernet/stmicro/stmmac/hwif.h
@@ -196,8 +196,8 @@
int (*dma_interrupt) (void __iomem *ioaddr,
struct stmmac_extra_stats *x, u32 chan);
/* If supported then get the optional core features */
- void (*get_hw_feature)(void __iomem *ioaddr,
- struct dma_features *dma_cap);
+ int (*get_hw_feature)(void __iomem *ioaddr,
+ struct dma_features *dma_cap);
/* Program the HW RX Watchdog */
void (*rx_watchdog)(void __iomem *ioaddr, u32 riwt, u32 number_chan);
void (*set_tx_ring_len)(void __iomem *ioaddr, u32 len, u32 chan);
@@ -247,7 +247,7 @@
#define stmmac_dma_interrupt_status(__priv, __args...) \
stmmac_do_callback(__priv, dma, dma_interrupt, __args)
#define stmmac_get_hw_feature(__priv, __args...) \
- stmmac_do_void_callback(__priv, dma, get_hw_feature, __args)
+ stmmac_do_callback(__priv, dma, get_hw_feature, __args)
#define stmmac_rx_watchdog(__priv, __args...) \
stmmac_do_void_callback(__priv, dma, rx_watchdog, __args)
#define stmmac_set_tx_ring_len(__priv, __args...) \
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index 05bdcc5..ca234d1 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -99,6 +99,10 @@
config USB_RTL8152
tristate "Realtek RTL8152/RTL8153 Based USB Ethernet Adapters"
select MII
+ select CRC32
+ select CRYPTO
+ select CRYPTO_HASH
+ select CRYPTO_SHA256
help
This option adds support for Realtek RTL8152 based USB 2.0
10/100 Ethernet adapters and RTL8153 based USB 3.0 10/100/1000
diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c
index 6da270e..c0f4324 100644
--- a/drivers/nvmem/core.c
+++ b/drivers/nvmem/core.c
@@ -954,7 +954,8 @@
*p-- = 0;
/* clear msb bits if any leftover in the last byte */
- *p &= GENMASK((cell->nbits%BITS_PER_BYTE) - 1, 0);
+ if (cell->nbits % BITS_PER_BYTE)
+ *p &= GENMASK((cell->nbits % BITS_PER_BYTE) - 1, 0);
}
static int __nvmem_cell_read(struct nvmem_device *nvmem,
diff --git a/drivers/platform/mellanox/mlxreg-io.c b/drivers/platform/mellanox/mlxreg-io.c
index acfaf64..1c3760c 100644
--- a/drivers/platform/mellanox/mlxreg-io.c
+++ b/drivers/platform/mellanox/mlxreg-io.c
@@ -123,7 +123,7 @@
return -EINVAL;
/* Convert buffer to input value. */
- ret = kstrtou32(buf, len, &input_val);
+ ret = kstrtou32(buf, 0, &input_val);
if (ret)
return ret;
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index d242779..ae8fa4f 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -28,6 +28,7 @@
#define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73
#define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000
#define PCI_DEVICE_ID_FRESCO_LOGIC_FL1009 0x1009
+#define PCI_DEVICE_ID_FRESCO_LOGIC_FL1100 0x1100
#define PCI_DEVICE_ID_FRESCO_LOGIC_FL1400 0x1400
#define PCI_VENDOR_ID_ETRON 0x1b6f
@@ -98,6 +99,7 @@
/* Look for vendor-specific quirks */
if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
(pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK ||
+ pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1100 ||
pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1400)) {
if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK &&
pdev->revision == 0x0) {
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 1228b3d..2c92fd1 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -339,16 +339,22 @@
/* Must be called with xhci->lock held, releases and aquires lock back */
static int xhci_abort_cmd_ring(struct xhci_hcd *xhci, unsigned long flags)
{
- u64 temp_64;
+ u32 temp_32;
int ret;
xhci_dbg(xhci, "Abort command ring\n");
reinit_completion(&xhci->cmd_ring_stop_completion);
- temp_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
- xhci_write_64(xhci, temp_64 | CMD_RING_ABORT,
- &xhci->op_regs->cmd_ring);
+ /*
+ * The control bits like command stop, abort are located in lower
+ * dword of the command ring control register. Limit the write
+ * to the lower dword to avoid corrupting the command ring pointer
+ * in case if the command ring is stopped by the time upper dword
+ * is written.
+ */
+ temp_32 = readl(&xhci->op_regs->cmd_ring);
+ writel(temp_32 | CMD_RING_ABORT, &xhci->op_regs->cmd_ring);
/* Section 4.6.1.2 of xHCI 1.0 spec says software should also time the
* completion of the Command Abort operation. If CRR is not negated in 5
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 02a2afd..4ef7484 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -3173,10 +3173,13 @@
return;
/* Bail out if toggle is already being cleared by a endpoint reset */
+ spin_lock_irqsave(&xhci->lock, flags);
if (ep->ep_state & EP_HARD_CLEAR_TOGGLE) {
ep->ep_state &= ~EP_HARD_CLEAR_TOGGLE;
+ spin_unlock_irqrestore(&xhci->lock, flags);
return;
}
+ spin_unlock_irqrestore(&xhci->lock, flags);
/* Only interrupt and bulk ep's use data toggle, USB2 spec 5.5.4-> */
if (usb_endpoint_xfer_control(&host_ep->desc) ||
usb_endpoint_xfer_isoc(&host_ep->desc))
@@ -3262,8 +3265,10 @@
xhci_free_command(xhci, cfg_cmd);
cleanup:
xhci_free_command(xhci, stop_cmd);
+ spin_lock_irqsave(&xhci->lock, flags);
if (ep->ep_state & EP_SOFT_CLEAR_TOGGLE)
ep->ep_state &= ~EP_SOFT_CLEAR_TOGGLE;
+ spin_unlock_irqrestore(&xhci->lock, flags);
}
static int xhci_check_streams_endpoint(struct xhci_hcd *xhci,
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index 89d659c..1b9ebd7 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -899,11 +899,13 @@
if (usb_get_dr_mode(&pdev->dev) == USB_DR_MODE_PERIPHERAL) {
ret = dsps_setup_optional_vbus_irq(pdev, glue);
if (ret)
- goto err;
+ goto unregister_pdev;
}
return 0;
+unregister_pdev:
+ platform_device_unregister(glue->musb);
err:
pm_runtime_disable(&pdev->dev);
iounmap(glue->usbss_base);
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 82016d9..a1e9cbe 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -246,11 +246,13 @@
/* These Quectel products use Quectel's vendor ID */
#define QUECTEL_PRODUCT_EC21 0x0121
#define QUECTEL_PRODUCT_EC25 0x0125
+#define QUECTEL_PRODUCT_EG91 0x0191
#define QUECTEL_PRODUCT_EG95 0x0195
#define QUECTEL_PRODUCT_BG96 0x0296
#define QUECTEL_PRODUCT_EP06 0x0306
#define QUECTEL_PRODUCT_EM12 0x0512
#define QUECTEL_PRODUCT_RM500Q 0x0800
+#define QUECTEL_PRODUCT_EC200S_CN 0x6002
#define QUECTEL_PRODUCT_EC200T 0x6026
#define CMOTECH_VENDOR_ID 0x16d8
@@ -1111,6 +1113,9 @@
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC25, 0xff, 0xff, 0xff),
.driver_info = NUMEP2 },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC25, 0xff, 0, 0) },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG91, 0xff, 0xff, 0xff),
+ .driver_info = NUMEP2 },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG91, 0xff, 0, 0) },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95, 0xff, 0xff, 0xff),
.driver_info = NUMEP2 },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95, 0xff, 0, 0) },
@@ -1128,6 +1133,7 @@
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0, 0) },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x10),
.driver_info = ZLP },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200S_CN, 0xff, 0, 0) },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200T, 0xff, 0, 0) },
{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) },
@@ -1227,6 +1233,8 @@
.driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1203, 0xff), /* Telit LE910Cx (RNDIS) */
.driver_info = NCTRL(2) | RSVD(3) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1204, 0xff), /* Telit LE910Cx (MBIM) */
+ .driver_info = NCTRL(0) | RSVD(1) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910_USBCFG4),
.driver_info = NCTRL(0) | RSVD(1) | RSVD(2) | RSVD(3) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920),
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 0f60363..b1b9923 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -165,6 +165,7 @@
{DEVICE_SWI(0x1199, 0x907b)}, /* Sierra Wireless EM74xx */
{DEVICE_SWI(0x1199, 0x9090)}, /* Sierra Wireless EM7565 QDL */
{DEVICE_SWI(0x1199, 0x9091)}, /* Sierra Wireless EM7565 */
+ {DEVICE_SWI(0x1199, 0x90d2)}, /* Sierra Wireless EM9191 QDL */
{DEVICE_SWI(0x413c, 0x81a2)}, /* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */
{DEVICE_SWI(0x413c, 0x81a3)}, /* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */
{DEVICE_SWI(0x413c, 0x81a4)}, /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */
diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c
index 59a05f1..91627e7 100644
--- a/drivers/virtio/virtio.c
+++ b/drivers/virtio/virtio.c
@@ -225,6 +225,17 @@
driver_features_legacy = driver_features;
}
+ /*
+ * Some devices detect legacy solely via F_VERSION_1. Write
+ * F_VERSION_1 to force LE config space accesses before FEATURES_OK for
+ * these when needed.
+ */
+ if (drv->validate && !virtio_legacy_is_little_endian()
+ && device_features & BIT_ULL(VIRTIO_F_VERSION_1)) {
+ dev->features = BIT_ULL(VIRTIO_F_VERSION_1);
+ dev->config->finalize_features(dev);
+ }
+
if (device_features & (1ULL << VIRTIO_F_VERSION_1))
dev->features = driver_features & device_features;
else
diff --git a/drivers/watchdog/orion_wdt.c b/drivers/watchdog/orion_wdt.c
index 8e6dfe7..4ddb4ea 100644
--- a/drivers/watchdog/orion_wdt.c
+++ b/drivers/watchdog/orion_wdt.c
@@ -52,7 +52,7 @@
#define WDT_A370_RATIO (1 << WDT_A370_RATIO_SHIFT)
static bool nowayout = WATCHDOG_NOWAYOUT;
-static int heartbeat = -1; /* module parameter (seconds) */
+static int heartbeat; /* module parameter (seconds) */
struct orion_watchdog;
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index 5273965..19d2104 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -4596,6 +4596,7 @@
out_free_delayed:
btrfs_free_delayed_extent_op(extent_op);
out_free_buf:
+ btrfs_tree_unlock(buf);
free_extent_buffer(buf);
out_free_reserved:
btrfs_free_reserved_extent(fs_info, ins.objectid, ins.offset, 0);
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index 8ea4b3d..9d358da 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -1160,7 +1160,10 @@
/* look for a conflicting sequence number */
di = btrfs_lookup_dir_index_item(trans, root, path, btrfs_ino(dir),
ref_index, name, namelen, 0);
- if (di && !IS_ERR(di)) {
+ if (IS_ERR(di)) {
+ if (PTR_ERR(di) != -ENOENT)
+ return PTR_ERR(di);
+ } else if (di) {
ret = drop_one_dir_item(trans, root, path, dir, di);
if (ret)
return ret;
@@ -1170,7 +1173,9 @@
/* look for a conflicting name */
di = btrfs_lookup_dir_item(trans, root, path, btrfs_ino(dir),
name, namelen, 0);
- if (di && !IS_ERR(di)) {
+ if (IS_ERR(di)) {
+ return PTR_ERR(di);
+ } else if (di) {
ret = drop_one_dir_item(trans, root, path, dir, di);
if (ret)
return ret;
@@ -1944,8 +1949,8 @@
struct btrfs_key log_key;
struct inode *dir;
u8 log_type;
- int exists;
- int ret = 0;
+ bool exists;
+ int ret;
bool update_size = (key->type == BTRFS_DIR_INDEX_KEY);
bool name_added = false;
@@ -1965,12 +1970,12 @@
name_len);
btrfs_dir_item_key_to_cpu(eb, di, &log_key);
- exists = btrfs_lookup_inode(trans, root, path, &log_key, 0);
- if (exists == 0)
- exists = 1;
- else
- exists = 0;
+ ret = btrfs_lookup_inode(trans, root, path, &log_key, 0);
btrfs_release_path(path);
+ if (ret < 0)
+ goto out;
+ exists = (ret == 0);
+ ret = 0;
if (key->type == BTRFS_DIR_ITEM_KEY) {
dst_di = btrfs_lookup_dir_item(trans, root, path, key->objectid,
@@ -1985,7 +1990,14 @@
ret = -EINVAL;
goto out;
}
- if (IS_ERR_OR_NULL(dst_di)) {
+
+ if (dst_di == ERR_PTR(-ENOENT))
+ dst_di = NULL;
+
+ if (IS_ERR(dst_di)) {
+ ret = PTR_ERR(dst_di);
+ goto out;
+ } else if (!dst_di) {
/* we need a sequence number to insert, so we only
* do inserts for the BTRFS_DIR_INDEX_KEY types
*/
diff --git a/fs/overlayfs/file.c b/fs/overlayfs/file.c
index ab5e928..81c9eab 100644
--- a/fs/overlayfs/file.c
+++ b/fs/overlayfs/file.c
@@ -296,48 +296,6 @@
return ret;
}
-static ssize_t ovl_splice_read(struct file *in, loff_t *ppos,
- struct pipe_inode_info *pipe, size_t len,
- unsigned int flags)
-{
- ssize_t ret;
- struct fd real;
- const struct cred *old_cred;
-
- ret = ovl_real_fdget(in, &real);
- if (ret)
- return ret;
-
- old_cred = ovl_override_creds(file_inode(in)->i_sb);
- ret = generic_file_splice_read(real.file, ppos, pipe, len, flags);
- revert_creds(old_cred);
-
- ovl_file_accessed(in);
- fdput(real);
- return ret;
-}
-
-static ssize_t
-ovl_splice_write(struct pipe_inode_info *pipe, struct file *out,
- loff_t *ppos, size_t len, unsigned int flags)
-{
- struct fd real;
- const struct cred *old_cred;
- ssize_t ret;
-
- ret = ovl_real_fdget(out, &real);
- if (ret)
- return ret;
-
- old_cred = ovl_override_creds(file_inode(out)->i_sb);
- ret = iter_file_splice_write(pipe, real.file, ppos, len, flags);
- revert_creds(old_cred);
-
- ovl_file_accessed(out);
- fdput(real);
- return ret;
-}
-
static int ovl_fsync(struct file *file, loff_t start, loff_t end, int datasync)
{
struct fd real;
@@ -694,8 +652,8 @@
.fadvise = ovl_fadvise,
.unlocked_ioctl = ovl_ioctl,
.compat_ioctl = ovl_compat_ioctl,
- .splice_read = ovl_splice_read,
- .splice_write = ovl_splice_write,
+ .splice_read = generic_file_splice_read,
+ .splice_write = iter_file_splice_write,
.copy_file_range = ovl_copy_file_range,
.remap_file_range = ovl_remap_file_range,
diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h
index 36516fe..641a01b 100644
--- a/include/linux/mlx5/mlx5_ifc.h
+++ b/include/linux/mlx5/mlx5_ifc.h
@@ -8942,16 +8942,22 @@
u8 reserved_at_0[0x8];
u8 local_port[0x8];
u8 reserved_at_10[0x10];
+
u8 entropy_force_cap[0x1];
u8 entropy_calc_cap[0x1];
u8 entropy_gre_calc_cap[0x1];
- u8 reserved_at_23[0x1b];
+ u8 reserved_at_23[0xf];
+ u8 rx_ts_over_crc_cap[0x1];
+ u8 reserved_at_33[0xb];
u8 fcs_cap[0x1];
u8 reserved_at_3f[0x1];
+
u8 entropy_force[0x1];
u8 entropy_calc[0x1];
u8 entropy_gre_calc[0x1];
- u8 reserved_at_43[0x1b];
+ u8 reserved_at_43[0xf];
+ u8 rx_ts_over_crc[0x1];
+ u8 reserved_at_53[0xb];
u8 fcs_chk[0x1];
u8 reserved_at_5f[0x1];
};
diff --git a/net/nfc/af_nfc.c b/net/nfc/af_nfc.c
index 4a9e720..581358d 100644
--- a/net/nfc/af_nfc.c
+++ b/net/nfc/af_nfc.c
@@ -60,6 +60,9 @@
proto_tab[nfc_proto->id] = nfc_proto;
write_unlock(&proto_tab_lock);
+ if (rc)
+ proto_unregister(nfc_proto->proto);
+
return rc;
}
EXPORT_SYMBOL(nfc_proto_register);
diff --git a/net/nfc/digital_core.c b/net/nfc/digital_core.c
index e3599ed..9c9caa3 100644
--- a/net/nfc/digital_core.c
+++ b/net/nfc/digital_core.c
@@ -277,6 +277,7 @@
static int digital_tg_listen_mdaa(struct nfc_digital_dev *ddev, u8 rf_tech)
{
struct digital_tg_mdaa_params *params;
+ int rc;
params = kzalloc(sizeof(*params), GFP_KERNEL);
if (!params)
@@ -291,8 +292,12 @@
get_random_bytes(params->nfcid2 + 2, NFC_NFCID2_MAXSIZE - 2);
params->sc = DIGITAL_SENSF_FELICA_SC;
- return digital_send_cmd(ddev, DIGITAL_CMD_TG_LISTEN_MDAA, NULL, params,
- 500, digital_tg_recv_atr_req, NULL);
+ rc = digital_send_cmd(ddev, DIGITAL_CMD_TG_LISTEN_MDAA, NULL, params,
+ 500, digital_tg_recv_atr_req, NULL);
+ if (rc)
+ kfree(params);
+
+ return rc;
}
static int digital_tg_listen_md(struct nfc_digital_dev *ddev, u8 rf_tech)
diff --git a/net/nfc/digital_technology.c b/net/nfc/digital_technology.c
index 84d2345..3adf458 100644
--- a/net/nfc/digital_technology.c
+++ b/net/nfc/digital_technology.c
@@ -465,8 +465,12 @@
skb_put_u8(skb, sel_cmd);
skb_put_u8(skb, DIGITAL_SDD_REQ_SEL_PAR);
- return digital_in_send_cmd(ddev, skb, 30, digital_in_recv_sdd_res,
- target);
+ rc = digital_in_send_cmd(ddev, skb, 30, digital_in_recv_sdd_res,
+ target);
+ if (rc)
+ kfree_skb(skb);
+
+ return rc;
}
static void digital_in_recv_sens_res(struct nfc_digital_dev *ddev, void *arg,
diff --git a/net/sched/sch_mqprio.c b/net/sched/sch_mqprio.c
index 8766ab5..5eb3b1b 100644
--- a/net/sched/sch_mqprio.c
+++ b/net/sched/sch_mqprio.c
@@ -529,22 +529,28 @@
for (i = tc.offset; i < tc.offset + tc.count; i++) {
struct netdev_queue *q = netdev_get_tx_queue(dev, i);
struct Qdisc *qdisc = rtnl_dereference(q->qdisc);
- struct gnet_stats_basic_cpu __percpu *cpu_bstats = NULL;
- struct gnet_stats_queue __percpu *cpu_qstats = NULL;
spin_lock_bh(qdisc_lock(qdisc));
- if (qdisc_is_percpu_stats(qdisc)) {
- cpu_bstats = qdisc->cpu_bstats;
- cpu_qstats = qdisc->cpu_qstats;
- }
- qlen = qdisc_qlen_sum(qdisc);
- __gnet_stats_copy_basic(NULL, &sch->bstats,
- cpu_bstats, &qdisc->bstats);
- __gnet_stats_copy_queue(&sch->qstats,
- cpu_qstats,
- &qdisc->qstats,
- qlen);
+ if (qdisc_is_percpu_stats(qdisc)) {
+ qlen = qdisc_qlen_sum(qdisc);
+
+ __gnet_stats_copy_basic(NULL, &bstats,
+ qdisc->cpu_bstats,
+ &qdisc->bstats);
+ __gnet_stats_copy_queue(&qstats,
+ qdisc->cpu_qstats,
+ &qdisc->qstats,
+ qlen);
+ } else {
+ qlen += qdisc->q.qlen;
+ bstats.bytes += qdisc->bstats.bytes;
+ bstats.packets += qdisc->bstats.packets;
+ qstats.backlog += qdisc->qstats.backlog;
+ qstats.drops += qdisc->qstats.drops;
+ qstats.requeues += qdisc->qstats.requeues;
+ qstats.overlimits += qdisc->qstats.overlimits;
+ }
spin_unlock_bh(qdisc_lock(qdisc));
}
diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c
index 000aa62..4eebe70 100644
--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -3659,7 +3659,7 @@
outlen = (sizeof(outreq) + stream_len) * out;
inlen = (sizeof(inreq) + stream_len) * in;
- retval = sctp_make_reconf(asoc, outlen + inlen);
+ retval = sctp_make_reconf(asoc, SCTP_PAD4(outlen) + SCTP_PAD4(inlen));
if (!retval)
return NULL;
diff --git a/scripts/recordmcount.pl b/scripts/recordmcount.pl
index 4f84657..f459ae8 100755
--- a/scripts/recordmcount.pl
+++ b/scripts/recordmcount.pl
@@ -222,7 +222,7 @@
$local_regex = "^[0-9a-fA-F]+\\s+t\\s+(\\S+)";
$weak_regex = "^[0-9a-fA-F]+\\s+([wW])\\s+(\\S+)";
$section_regex = "Disassembly of section\\s+(\\S+):";
-$function_regex = "^([0-9a-fA-F]+)\\s+<(.*?)>:";
+$function_regex = "^([0-9a-fA-F]+)\\s+<([^^]*?)>:";
$mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s(mcount|__fentry__)\$";
$section_type = '@progbits';
$mcount_adjust = 0;
diff --git a/sound/core/seq_device.c b/sound/core/seq_device.c
index e9dbad9..c922304 100644
--- a/sound/core/seq_device.c
+++ b/sound/core/seq_device.c
@@ -147,6 +147,8 @@
struct snd_seq_device *dev = device->device_data;
cancel_autoload_drivers();
+ if (dev->private_free)
+ dev->private_free(dev);
put_device(&dev->dev);
return 0;
}
@@ -174,11 +176,7 @@
static void snd_seq_dev_release(struct device *dev)
{
- struct snd_seq_device *sdev = to_seq_dev(dev);
-
- if (sdev->private_free)
- sdev->private_free(sdev);
- kfree(sdev);
+ kfree(to_seq_dev(dev));
}
/*
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index abe371c..c4837c7 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -517,6 +517,8 @@
struct alc_spec *spec = codec->spec;
switch (codec->core.vendor_id) {
+ case 0x10ec0236:
+ case 0x10ec0256:
case 0x10ec0283:
case 0x10ec0286:
case 0x10ec0288:
@@ -2539,7 +2541,8 @@
SND_PCI_QUIRK(0x1558, 0x67e1, "Clevo PB71[DE][CDF]", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
SND_PCI_QUIRK(0x1558, 0x67e5, "Clevo PC70D[PRS](?:-D|-G)?", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
SND_PCI_QUIRK(0x1558, 0x70d1, "Clevo PC70[ER][CDF]", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
- SND_PCI_QUIRK(0x1558, 0x7714, "Clevo X170", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
+ SND_PCI_QUIRK(0x1558, 0x7714, "Clevo X170SM", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
+ SND_PCI_QUIRK(0x1558, 0x7715, "Clevo X170KM-G", ALC1220_FIXUP_CLEVO_PB51ED),
SND_PCI_QUIRK(0x1558, 0x9501, "Clevo P950HR", ALC1220_FIXUP_CLEVO_P950),
SND_PCI_QUIRK(0x1558, 0x9506, "Clevo P955HQ", ALC1220_FIXUP_CLEVO_P950),
SND_PCI_QUIRK(0x1558, 0x950a, "Clevo P955H[PR]", ALC1220_FIXUP_CLEVO_P950),
@@ -3521,7 +3524,8 @@
/* If disable 3k pulldown control for alc257, the Mic detection will not work correctly
* when booting with headset plugged. So skip setting it for the codec alc257
*/
- if (codec->core.vendor_id != 0x10ec0257)
+ if (spec->codec_variant != ALC269_TYPE_ALC257 &&
+ spec->codec_variant != ALC269_TYPE_ALC256)
alc_update_coef_idx(codec, 0x46, 0, 3 << 12);
if (!spec->no_shutup_pins)
@@ -9688,6 +9692,9 @@
ALC671_FIXUP_HP_HEADSET_MIC2,
ALC662_FIXUP_ACER_X2660G_HEADSET_MODE,
ALC662_FIXUP_ACER_NITRO_HEADSET_MODE,
+ ALC668_FIXUP_ASUS_NO_HEADSET_MIC,
+ ALC668_FIXUP_HEADSET_MIC,
+ ALC668_FIXUP_MIC_DET_COEF,
};
static const struct hda_fixup alc662_fixups[] = {
@@ -10071,6 +10078,29 @@
.chained = true,
.chain_id = ALC662_FIXUP_USI_FUNC
},
+ [ALC668_FIXUP_ASUS_NO_HEADSET_MIC] = {
+ .type = HDA_FIXUP_PINS,
+ .v.pins = (const struct hda_pintbl[]) {
+ { 0x1b, 0x04a1112c },
+ { }
+ },
+ .chained = true,
+ .chain_id = ALC668_FIXUP_HEADSET_MIC
+ },
+ [ALC668_FIXUP_HEADSET_MIC] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = alc269_fixup_headset_mic,
+ .chained = true,
+ .chain_id = ALC668_FIXUP_MIC_DET_COEF
+ },
+ [ALC668_FIXUP_MIC_DET_COEF] = {
+ .type = HDA_FIXUP_VERBS,
+ .v.verbs = (const struct hda_verb[]) {
+ { 0x20, AC_VERB_SET_COEF_INDEX, 0x15 },
+ { 0x20, AC_VERB_SET_PROC_COEF, 0x0d60 },
+ {}
+ },
+ },
};
static const struct snd_pci_quirk alc662_fixup_tbl[] = {
@@ -10106,6 +10136,7 @@
SND_PCI_QUIRK(0x1043, 0x15a7, "ASUS UX51VZH", ALC662_FIXUP_BASS_16),
SND_PCI_QUIRK(0x1043, 0x177d, "ASUS N551", ALC668_FIXUP_ASUS_Nx51),
SND_PCI_QUIRK(0x1043, 0x17bd, "ASUS N751", ALC668_FIXUP_ASUS_Nx51),
+ SND_PCI_QUIRK(0x1043, 0x185d, "ASUS G551JW", ALC668_FIXUP_ASUS_NO_HEADSET_MIC),
SND_PCI_QUIRK(0x1043, 0x1963, "ASUS X71SL", ALC662_FIXUP_ASUS_MODE8),
SND_PCI_QUIRK(0x1043, 0x1b73, "ASUS N55SF", ALC662_FIXUP_BASS_16),
SND_PCI_QUIRK(0x1043, 0x1bf3, "ASUS N76VZ", ALC662_FIXUP_BASS_MODE4_CHMAP),
diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index 441335a..9620ae0 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -126,6 +126,48 @@
},
/*
+ * Creative Technology, Ltd Live! Cam Sync HD [VF0770]
+ * The device advertises 8 formats, but only a rate of 48kHz is honored by the
+ * hardware and 24 bits give chopped audio, so only report the one working
+ * combination.
+ */
+{
+ USB_DEVICE(0x041e, 0x4095),
+ .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+ .ifnum = QUIRK_ANY_INTERFACE,
+ .type = QUIRK_COMPOSITE,
+ .data = &(const struct snd_usb_audio_quirk[]) {
+ {
+ .ifnum = 2,
+ .type = QUIRK_AUDIO_STANDARD_MIXER,
+ },
+ {
+ .ifnum = 3,
+ .type = QUIRK_AUDIO_FIXED_ENDPOINT,
+ .data = &(const struct audioformat) {
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .channels = 2,
+ .fmt_bits = 16,
+ .iface = 3,
+ .altsetting = 4,
+ .altset_idx = 4,
+ .endpoint = 0x82,
+ .ep_attr = 0x05,
+ .rates = SNDRV_PCM_RATE_48000,
+ .rate_min = 48000,
+ .rate_max = 48000,
+ .nr_rates = 1,
+ .rate_table = (unsigned int[]) { 48000 },
+ },
+ },
+ {
+ .ifnum = -1
+ },
+ },
+ },
+},
+
+/*
* HP Wireless Audio
* When not ignored, causes instability issues for some users, forcing them to
* blacklist the entire module.
