blob: 4b93ba149ec5ceaeb5c7cbad07947a50ffa73ead [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/* Copyright(c) 1999 - 2018 Intel Corporation. */
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/sched.h>
#include "ixgbe.h"
#include "ixgbe_phy.h"
#include "ixgbe_x540.h"
#define IXGBE_X540_MAX_TX_QUEUES 128
#define IXGBE_X540_MAX_RX_QUEUES 128
#define IXGBE_X540_RAR_ENTRIES 128
#define IXGBE_X540_MC_TBL_SIZE 128
#define IXGBE_X540_VFT_TBL_SIZE 128
#define IXGBE_X540_RX_PB_SIZE 384
static s32 ixgbe_update_flash_X540(struct ixgbe_hw *hw);
static s32 ixgbe_poll_flash_update_done_X540(struct ixgbe_hw *hw);
static s32 ixgbe_get_swfw_sync_semaphore(struct ixgbe_hw *hw);
static void ixgbe_release_swfw_sync_semaphore(struct ixgbe_hw *hw);
enum ixgbe_media_type ixgbe_get_media_type_X540(struct ixgbe_hw *hw)
{
return ixgbe_media_type_copper;
}
s32 ixgbe_get_invariants_X540(struct ixgbe_hw *hw)
{
struct ixgbe_mac_info *mac = &hw->mac;
struct ixgbe_phy_info *phy = &hw->phy;
/* set_phy_power was set by default to NULL */
phy->ops.set_phy_power = ixgbe_set_copper_phy_power;
mac->mcft_size = IXGBE_X540_MC_TBL_SIZE;
mac->vft_size = IXGBE_X540_VFT_TBL_SIZE;
mac->num_rar_entries = IXGBE_X540_RAR_ENTRIES;
mac->rx_pb_size = IXGBE_X540_RX_PB_SIZE;
mac->max_rx_queues = IXGBE_X540_MAX_RX_QUEUES;
mac->max_tx_queues = IXGBE_X540_MAX_TX_QUEUES;
mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw);
return 0;
}
/**
* ixgbe_setup_mac_link_X540 - Set the auto advertised capabilitires
* @hw: pointer to hardware structure
* @speed: new link speed
* @autoneg_wait_to_complete: true when waiting for completion is needed
**/
s32 ixgbe_setup_mac_link_X540(struct ixgbe_hw *hw, ixgbe_link_speed speed,
bool autoneg_wait_to_complete)
{
return hw->phy.ops.setup_link_speed(hw, speed,
autoneg_wait_to_complete);
}
/**
* ixgbe_reset_hw_X540 - Perform hardware reset
* @hw: pointer to hardware structure
*
* Resets the hardware by resetting the transmit and receive units, masks
* and clears all interrupts, perform a PHY reset, and perform a link (MAC)
* reset.
**/
s32 ixgbe_reset_hw_X540(struct ixgbe_hw *hw)
{
s32 status;
u32 ctrl, i;
u32 swfw_mask = hw->phy.phy_semaphore_mask;
/* Call adapter stop to disable tx/rx and clear interrupts */
status = hw->mac.ops.stop_adapter(hw);
if (status)
return status;
/* flush pending Tx transactions */
ixgbe_clear_tx_pending(hw);
mac_reset_top:
status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask);
if (status) {
hw_dbg(hw, "semaphore failed with %d", status);
return IXGBE_ERR_SWFW_SYNC;
}
ctrl = IXGBE_CTRL_RST;
ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL);
IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl);
IXGBE_WRITE_FLUSH(hw);
hw->mac.ops.release_swfw_sync(hw, swfw_mask);
usleep_range(1000, 1200);
/* Poll for reset bit to self-clear indicating reset is complete */
for (i = 0; i < 10; i++) {
ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
if (!(ctrl & IXGBE_CTRL_RST_MASK))
break;
udelay(1);
}
if (ctrl & IXGBE_CTRL_RST_MASK) {
status = IXGBE_ERR_RESET_FAILED;
hw_dbg(hw, "Reset polling failed to complete.\n");
}
msleep(100);
/*
* Double resets are required for recovery from certain error
* conditions. Between resets, it is necessary to stall to allow time
* for any pending HW events to complete.
*/
if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) {
hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED;
goto mac_reset_top;
}
/* Set the Rx packet buffer size. */
IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(0), 384 << IXGBE_RXPBSIZE_SHIFT);
/* Store the permanent mac address */
hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
/*
* Store MAC address from RAR0, clear receive address registers, and
* clear the multicast table. Also reset num_rar_entries to 128,
* since we modify this value when programming the SAN MAC address.
*/
hw->mac.num_rar_entries = IXGBE_X540_MAX_TX_QUEUES;
hw->mac.ops.init_rx_addrs(hw);
/* Store the permanent SAN mac address */
hw->mac.ops.get_san_mac_addr(hw, hw->mac.san_addr);
/* Add the SAN MAC address to the RAR only if it's a valid address */
if (is_valid_ether_addr(hw->mac.san_addr)) {
/* Save the SAN MAC RAR index */
hw->mac.san_mac_rar_index = hw->mac.num_rar_entries - 1;
hw->mac.ops.set_rar(hw, hw->mac.san_mac_rar_index,
hw->mac.san_addr, 0, IXGBE_RAH_AV);
/* clear VMDq pool/queue selection for this RAR */
hw->mac.ops.clear_vmdq(hw, hw->mac.san_mac_rar_index,
IXGBE_CLEAR_VMDQ_ALL);
/* Reserve the last RAR for the SAN MAC address */
hw->mac.num_rar_entries--;
}
/* Store the alternative WWNN/WWPN prefix */
hw->mac.ops.get_wwn_prefix(hw, &hw->mac.wwnn_prefix,
&hw->mac.wwpn_prefix);
return status;
}
/**
* ixgbe_start_hw_X540 - Prepare hardware for Tx/Rx
* @hw: pointer to hardware structure
*
* Starts the hardware using the generic start_hw function
* and the generation start_hw function.
* Then performs revision-specific operations, if any.
**/
s32 ixgbe_start_hw_X540(struct ixgbe_hw *hw)
{
s32 ret_val;
ret_val = ixgbe_start_hw_generic(hw);
if (ret_val)
return ret_val;
return ixgbe_start_hw_gen2(hw);
}
/**
* ixgbe_init_eeprom_params_X540 - Initialize EEPROM params
* @hw: pointer to hardware structure
*
* Initializes the EEPROM parameters ixgbe_eeprom_info within the
* ixgbe_hw struct in order to set up EEPROM access.
**/
s32 ixgbe_init_eeprom_params_X540(struct ixgbe_hw *hw)
{
struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
u32 eec;
u16 eeprom_size;
if (eeprom->type == ixgbe_eeprom_uninitialized) {
eeprom->semaphore_delay = 10;
eeprom->type = ixgbe_flash;
eec = IXGBE_READ_REG(hw, IXGBE_EEC(hw));
eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >>
IXGBE_EEC_SIZE_SHIFT);
eeprom->word_size = BIT(eeprom_size +
IXGBE_EEPROM_WORD_SIZE_SHIFT);
hw_dbg(hw, "Eeprom params: type = %d, size = %d\n",
eeprom->type, eeprom->word_size);
}
return 0;
}
/**
* ixgbe_read_eerd_X540- Read EEPROM word using EERD
* @hw: pointer to hardware structure
* @offset: offset of word in the EEPROM to read
* @data: word read from the EEPROM
*
* Reads a 16 bit word from the EEPROM using the EERD register.
**/
static s32 ixgbe_read_eerd_X540(struct ixgbe_hw *hw, u16 offset, u16 *data)
{
s32 status;
if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM))
return IXGBE_ERR_SWFW_SYNC;
status = ixgbe_read_eerd_generic(hw, offset, data);
hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
return status;
}
/**
* ixgbe_read_eerd_buffer_X540 - Read EEPROM word(s) using EERD
* @hw: pointer to hardware structure
* @offset: offset of word in the EEPROM to read
* @words: number of words
* @data: word(s) read from the EEPROM
*
* Reads a 16 bit word(s) from the EEPROM using the EERD register.
**/
static s32 ixgbe_read_eerd_buffer_X540(struct ixgbe_hw *hw,
u16 offset, u16 words, u16 *data)
{
s32 status;
if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM))
return IXGBE_ERR_SWFW_SYNC;
status = ixgbe_read_eerd_buffer_generic(hw, offset, words, data);
hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
return status;
}
/**
* ixgbe_write_eewr_X540 - Write EEPROM word using EEWR
* @hw: pointer to hardware structure
* @offset: offset of word in the EEPROM to write
* @data: word write to the EEPROM
*
* Write a 16 bit word to the EEPROM using the EEWR register.
**/
static s32 ixgbe_write_eewr_X540(struct ixgbe_hw *hw, u16 offset, u16 data)
{
s32 status;
if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM))
return IXGBE_ERR_SWFW_SYNC;
status = ixgbe_write_eewr_generic(hw, offset, data);
hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
return status;
}
/**
* ixgbe_write_eewr_buffer_X540 - Write EEPROM word(s) using EEWR
* @hw: pointer to hardware structure
* @offset: offset of word in the EEPROM to write
* @words: number of words
* @data: word(s) write to the EEPROM
*
* Write a 16 bit word(s) to the EEPROM using the EEWR register.
**/
static s32 ixgbe_write_eewr_buffer_X540(struct ixgbe_hw *hw,
u16 offset, u16 words, u16 *data)
{
s32 status;
if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM))
return IXGBE_ERR_SWFW_SYNC;
status = ixgbe_write_eewr_buffer_generic(hw, offset, words, data);
hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
return status;
}
/**
* ixgbe_calc_eeprom_checksum_X540 - Calculates and returns the checksum
*
* This function does not use synchronization for EERD and EEWR. It can
* be used internally by function which utilize ixgbe_acquire_swfw_sync_X540.
*
* @hw: pointer to hardware structure
**/
static s32 ixgbe_calc_eeprom_checksum_X540(struct ixgbe_hw *hw)
{
u16 i;
u16 j;
u16 checksum = 0;
u16 length = 0;
u16 pointer = 0;
u16 word = 0;
u16 checksum_last_word = IXGBE_EEPROM_CHECKSUM;
u16 ptr_start = IXGBE_PCIE_ANALOG_PTR;
/*
* Do not use hw->eeprom.ops.read because we do not want to take
* the synchronization semaphores here. Instead use
* ixgbe_read_eerd_generic
*/
/* Include 0x0-0x3F in the checksum */
for (i = 0; i < checksum_last_word; i++) {
if (ixgbe_read_eerd_generic(hw, i, &word)) {
hw_dbg(hw, "EEPROM read failed\n");
return IXGBE_ERR_EEPROM;
}
checksum += word;
}
/*
* Include all data from pointers 0x3, 0x6-0xE. This excludes the
* FW, PHY module, and PCIe Expansion/Option ROM pointers.
*/
for (i = ptr_start; i < IXGBE_FW_PTR; i++) {
if (i == IXGBE_PHY_PTR || i == IXGBE_OPTION_ROM_PTR)
continue;
if (ixgbe_read_eerd_generic(hw, i, &pointer)) {
hw_dbg(hw, "EEPROM read failed\n");
break;
}
/* Skip pointer section if the pointer is invalid. */
if (pointer == 0xFFFF || pointer == 0 ||
pointer >= hw->eeprom.word_size)
continue;
if (ixgbe_read_eerd_generic(hw, pointer, &length)) {
hw_dbg(hw, "EEPROM read failed\n");
return IXGBE_ERR_EEPROM;
}
/* Skip pointer section if length is invalid. */
if (length == 0xFFFF || length == 0 ||
(pointer + length) >= hw->eeprom.word_size)
continue;
for (j = pointer + 1; j <= pointer + length; j++) {
if (ixgbe_read_eerd_generic(hw, j, &word)) {
hw_dbg(hw, "EEPROM read failed\n");
return IXGBE_ERR_EEPROM;
}
checksum += word;
}
}
checksum = (u16)IXGBE_EEPROM_SUM - checksum;
return (s32)checksum;
}
/**
* ixgbe_validate_eeprom_checksum_X540 - Validate EEPROM checksum
* @hw: pointer to hardware structure
* @checksum_val: calculated checksum
*
* Performs checksum calculation and validates the EEPROM checksum. If the
* caller does not need checksum_val, the value can be NULL.
**/
static s32 ixgbe_validate_eeprom_checksum_X540(struct ixgbe_hw *hw,
u16 *checksum_val)
{
s32 status;
u16 checksum;
u16 read_checksum = 0;
/* Read the first word from the EEPROM. If this times out or fails, do
* not continue or we could be in for a very long wait while every
* EEPROM read fails
*/
status = hw->eeprom.ops.read(hw, 0, &checksum);
if (status) {
hw_dbg(hw, "EEPROM read failed\n");
return status;
}
if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM))
return IXGBE_ERR_SWFW_SYNC;
status = hw->eeprom.ops.calc_checksum(hw);
if (status < 0)
goto out;
checksum = (u16)(status & 0xffff);
/* Do not use hw->eeprom.ops.read because we do not want to take
* the synchronization semaphores twice here.
*/
status = ixgbe_read_eerd_generic(hw, IXGBE_EEPROM_CHECKSUM,
&read_checksum);
if (status)
goto out;
/* Verify read checksum from EEPROM is the same as
* calculated checksum
*/
if (read_checksum != checksum) {
hw_dbg(hw, "Invalid EEPROM checksum");
status = IXGBE_ERR_EEPROM_CHECKSUM;
}
/* If the user cares, return the calculated checksum */
if (checksum_val)
*checksum_val = checksum;
out:
hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
return status;
}
/**
* ixgbe_update_eeprom_checksum_X540 - Updates the EEPROM checksum and flash
* @hw: pointer to hardware structure
*
* After writing EEPROM to shadow RAM using EEWR register, software calculates
* checksum and updates the EEPROM and instructs the hardware to update
* the flash.
**/
static s32 ixgbe_update_eeprom_checksum_X540(struct ixgbe_hw *hw)
{
s32 status;
u16 checksum;
/* Read the first word from the EEPROM. If this times out or fails, do
* not continue or we could be in for a very long wait while every
* EEPROM read fails
*/
status = hw->eeprom.ops.read(hw, 0, &checksum);
if (status) {
hw_dbg(hw, "EEPROM read failed\n");
return status;
}
if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM))
return IXGBE_ERR_SWFW_SYNC;
status = hw->eeprom.ops.calc_checksum(hw);
if (status < 0)
goto out;
checksum = (u16)(status & 0xffff);
/* Do not use hw->eeprom.ops.write because we do not want to
* take the synchronization semaphores twice here.
*/
status = ixgbe_write_eewr_generic(hw, IXGBE_EEPROM_CHECKSUM, checksum);
if (status)
goto out;
status = ixgbe_update_flash_X540(hw);
out:
hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
return status;
}
/**
* ixgbe_update_flash_X540 - Instruct HW to copy EEPROM to Flash device
* @hw: pointer to hardware structure
*
* Set FLUP (bit 23) of the EEC register to instruct Hardware to copy
* EEPROM from shadow RAM to the flash device.
**/
static s32 ixgbe_update_flash_X540(struct ixgbe_hw *hw)
{
u32 flup;
s32 status;
status = ixgbe_poll_flash_update_done_X540(hw);
if (status == IXGBE_ERR_EEPROM) {
hw_dbg(hw, "Flash update time out\n");
return status;
}
flup = IXGBE_READ_REG(hw, IXGBE_EEC(hw)) | IXGBE_EEC_FLUP;
IXGBE_WRITE_REG(hw, IXGBE_EEC(hw), flup);
status = ixgbe_poll_flash_update_done_X540(hw);
if (status == 0)
hw_dbg(hw, "Flash update complete\n");
else
hw_dbg(hw, "Flash update time out\n");
if (hw->revision_id == 0) {
flup = IXGBE_READ_REG(hw, IXGBE_EEC(hw));
if (flup & IXGBE_EEC_SEC1VAL) {
flup |= IXGBE_EEC_FLUP;
IXGBE_WRITE_REG(hw, IXGBE_EEC(hw), flup);
}
status = ixgbe_poll_flash_update_done_X540(hw);
if (status == 0)
hw_dbg(hw, "Flash update complete\n");
else
hw_dbg(hw, "Flash update time out\n");
}
return status;
}
/**
* ixgbe_poll_flash_update_done_X540 - Poll flash update status
* @hw: pointer to hardware structure
*
* Polls the FLUDONE (bit 26) of the EEC Register to determine when the
* flash update is done.
**/
static s32 ixgbe_poll_flash_update_done_X540(struct ixgbe_hw *hw)
{
u32 i;
u32 reg;
for (i = 0; i < IXGBE_FLUDONE_ATTEMPTS; i++) {
reg = IXGBE_READ_REG(hw, IXGBE_EEC(hw));
if (reg & IXGBE_EEC_FLUDONE)
return 0;
udelay(5);
}
return IXGBE_ERR_EEPROM;
}
/**
* ixgbe_acquire_swfw_sync_X540 - Acquire SWFW semaphore
* @hw: pointer to hardware structure
* @mask: Mask to specify which semaphore to acquire
*
* Acquires the SWFW semaphore thought the SW_FW_SYNC register for
* the specified function (CSR, PHY0, PHY1, NVM, Flash)
**/
s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask)
{
u32 swmask = mask & IXGBE_GSSR_NVM_PHY_MASK;
u32 swi2c_mask = mask & IXGBE_GSSR_I2C_MASK;
u32 fwmask = swmask << 5;
u32 timeout = 200;
u32 hwmask = 0;
u32 swfw_sync;
u32 i;
if (swmask & IXGBE_GSSR_EEP_SM)
hwmask = IXGBE_GSSR_FLASH_SM;
/* SW only mask does not have FW bit pair */
if (mask & IXGBE_GSSR_SW_MNG_SM)
swmask |= IXGBE_GSSR_SW_MNG_SM;
swmask |= swi2c_mask;
fwmask |= swi2c_mask << 2;
for (i = 0; i < timeout; i++) {
/* SW NVM semaphore bit is used for access to all
* SW_FW_SYNC bits (not just NVM)
*/
if (ixgbe_get_swfw_sync_semaphore(hw))
return IXGBE_ERR_SWFW_SYNC;
swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC(hw));
if (!(swfw_sync & (fwmask | swmask | hwmask))) {
swfw_sync |= swmask;
IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC(hw), swfw_sync);
ixgbe_release_swfw_sync_semaphore(hw);
usleep_range(5000, 6000);
return 0;
}
/* Firmware currently using resource (fwmask), hardware
* currently using resource (hwmask), or other software
* thread currently using resource (swmask)
*/
ixgbe_release_swfw_sync_semaphore(hw);
usleep_range(5000, 10000);
}
/* If the resource is not released by the FW/HW the SW can assume that
* the FW/HW malfunctions. In that case the SW should set the SW bit(s)
* of the requested resource(s) while ignoring the corresponding FW/HW
* bits in the SW_FW_SYNC register.
*/
if (ixgbe_get_swfw_sync_semaphore(hw))
return IXGBE_ERR_SWFW_SYNC;
swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC(hw));
if (swfw_sync & (fwmask | hwmask)) {
swfw_sync |= swmask;
IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC(hw), swfw_sync);
ixgbe_release_swfw_sync_semaphore(hw);
usleep_range(5000, 6000);
return 0;
}
/* If the resource is not released by other SW the SW can assume that
* the other SW malfunctions. In that case the SW should clear all SW
* flags that it does not own and then repeat the whole process once
* again.
*/
if (swfw_sync & swmask) {
u32 rmask = IXGBE_GSSR_EEP_SM | IXGBE_GSSR_PHY0_SM |
IXGBE_GSSR_PHY1_SM | IXGBE_GSSR_MAC_CSR_SM |
IXGBE_GSSR_SW_MNG_SM;
if (swi2c_mask)
rmask |= IXGBE_GSSR_I2C_MASK;
ixgbe_release_swfw_sync_X540(hw, rmask);
ixgbe_release_swfw_sync_semaphore(hw);
return IXGBE_ERR_SWFW_SYNC;
}
ixgbe_release_swfw_sync_semaphore(hw);
return IXGBE_ERR_SWFW_SYNC;
}
/**
* ixgbe_release_swfw_sync_X540 - Release SWFW semaphore
* @hw: pointer to hardware structure
* @mask: Mask to specify which semaphore to release
*
* Releases the SWFW semaphore through the SW_FW_SYNC register
* for the specified function (CSR, PHY0, PHY1, EVM, Flash)
**/
void ixgbe_release_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask)
{
u32 swmask = mask & (IXGBE_GSSR_NVM_PHY_MASK | IXGBE_GSSR_SW_MNG_SM);
u32 swfw_sync;
if (mask & IXGBE_GSSR_I2C_MASK)
swmask |= mask & IXGBE_GSSR_I2C_MASK;
ixgbe_get_swfw_sync_semaphore(hw);
swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC(hw));
swfw_sync &= ~swmask;
IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC(hw), swfw_sync);
ixgbe_release_swfw_sync_semaphore(hw);
usleep_range(5000, 6000);
}
/**
* ixgbe_get_swfw_sync_semaphore - Get hardware semaphore
* @hw: pointer to hardware structure
*
* Sets the hardware semaphores so SW/FW can gain control of shared resources
*/
static s32 ixgbe_get_swfw_sync_semaphore(struct ixgbe_hw *hw)
{
u32 timeout = 2000;
u32 i;
u32 swsm;
/* Get SMBI software semaphore between device drivers first */
for (i = 0; i < timeout; i++) {
/* If the SMBI bit is 0 when we read it, then the bit will be
* set and we have the semaphore
*/
swsm = IXGBE_READ_REG(hw, IXGBE_SWSM(hw));
if (!(swsm & IXGBE_SWSM_SMBI))
break;
usleep_range(50, 100);
}
if (i == timeout) {
hw_dbg(hw,
"Software semaphore SMBI between device drivers not granted.\n");
return IXGBE_ERR_EEPROM;
}
/* Now get the semaphore between SW/FW through the REGSMP bit */
for (i = 0; i < timeout; i++) {
swsm = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC(hw));
if (!(swsm & IXGBE_SWFW_REGSMP))
return 0;
usleep_range(50, 100);
}
/* Release semaphores and return error if SW NVM semaphore
* was not granted because we do not have access to the EEPROM
*/
hw_dbg(hw, "REGSMP Software NVM semaphore not granted\n");
ixgbe_release_swfw_sync_semaphore(hw);
return IXGBE_ERR_EEPROM;
}
/**
* ixgbe_release_nvm_semaphore - Release hardware semaphore
* @hw: pointer to hardware structure
*
* This function clears hardware semaphore bits.
**/
static void ixgbe_release_swfw_sync_semaphore(struct ixgbe_hw *hw)
{
u32 swsm;
/* Release both semaphores by writing 0 to the bits REGSMP and SMBI */
swsm = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC(hw));
swsm &= ~IXGBE_SWFW_REGSMP;
IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC(hw), swsm);
swsm = IXGBE_READ_REG(hw, IXGBE_SWSM(hw));
swsm &= ~IXGBE_SWSM_SMBI;
IXGBE_WRITE_REG(hw, IXGBE_SWSM(hw), swsm);
IXGBE_WRITE_FLUSH(hw);
}
/**
* ixgbe_init_swfw_sync_X540 - Release hardware semaphore
* @hw: pointer to hardware structure
*
* This function reset hardware semaphore bits for a semaphore that may
* have be left locked due to a catastrophic failure.
**/
void ixgbe_init_swfw_sync_X540(struct ixgbe_hw *hw)
{
u32 rmask;
/* First try to grab the semaphore but we don't need to bother
* looking to see whether we got the lock or not since we do
* the same thing regardless of whether we got the lock or not.
* We got the lock - we release it.
* We timeout trying to get the lock - we force its release.
*/
ixgbe_get_swfw_sync_semaphore(hw);
ixgbe_release_swfw_sync_semaphore(hw);
/* Acquire and release all software resources. */
rmask = IXGBE_GSSR_EEP_SM | IXGBE_GSSR_PHY0_SM |
IXGBE_GSSR_PHY1_SM | IXGBE_GSSR_MAC_CSR_SM |
IXGBE_GSSR_SW_MNG_SM | IXGBE_GSSR_I2C_MASK;
ixgbe_acquire_swfw_sync_X540(hw, rmask);
ixgbe_release_swfw_sync_X540(hw, rmask);
}
/**
* ixgbe_blink_led_start_X540 - Blink LED based on index.
* @hw: pointer to hardware structure
* @index: led number to blink
*
* Devices that implement the version 2 interface:
* X540
**/
s32 ixgbe_blink_led_start_X540(struct ixgbe_hw *hw, u32 index)
{
u32 macc_reg;
u32 ledctl_reg;
ixgbe_link_speed speed;
bool link_up;
if (index > 3)
return IXGBE_ERR_PARAM;
/* Link should be up in order for the blink bit in the LED control
* register to work. Force link and speed in the MAC if link is down.
* This will be reversed when we stop the blinking.
*/
hw->mac.ops.check_link(hw, &speed, &link_up, false);
if (!link_up) {
macc_reg = IXGBE_READ_REG(hw, IXGBE_MACC);
macc_reg |= IXGBE_MACC_FLU | IXGBE_MACC_FSV_10G | IXGBE_MACC_FS;
IXGBE_WRITE_REG(hw, IXGBE_MACC, macc_reg);
}
/* Set the LED to LINK_UP + BLINK. */
ledctl_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
ledctl_reg &= ~IXGBE_LED_MODE_MASK(index);
ledctl_reg |= IXGBE_LED_BLINK(index);
IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, ledctl_reg);
IXGBE_WRITE_FLUSH(hw);
return 0;
}
/**
* ixgbe_blink_led_stop_X540 - Stop blinking LED based on index.
* @hw: pointer to hardware structure
* @index: led number to stop blinking
*
* Devices that implement the version 2 interface:
* X540
**/
s32 ixgbe_blink_led_stop_X540(struct ixgbe_hw *hw, u32 index)
{
u32 macc_reg;
u32 ledctl_reg;
if (index > 3)
return IXGBE_ERR_PARAM;
/* Restore the LED to its default value. */
ledctl_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
ledctl_reg &= ~IXGBE_LED_MODE_MASK(index);
ledctl_reg |= IXGBE_LED_LINK_ACTIVE << IXGBE_LED_MODE_SHIFT(index);
ledctl_reg &= ~IXGBE_LED_BLINK(index);
IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, ledctl_reg);
/* Unforce link and speed in the MAC. */
macc_reg = IXGBE_READ_REG(hw, IXGBE_MACC);
macc_reg &= ~(IXGBE_MACC_FLU | IXGBE_MACC_FSV_10G | IXGBE_MACC_FS);
IXGBE_WRITE_REG(hw, IXGBE_MACC, macc_reg);
IXGBE_WRITE_FLUSH(hw);
return 0;
}
static const struct ixgbe_mac_operations mac_ops_X540 = {
.init_hw = &ixgbe_init_hw_generic,
.reset_hw = &ixgbe_reset_hw_X540,
.start_hw = &ixgbe_start_hw_X540,
.clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic,
.get_media_type = &ixgbe_get_media_type_X540,
.enable_rx_dma = &ixgbe_enable_rx_dma_generic,
.get_mac_addr = &ixgbe_get_mac_addr_generic,
.get_san_mac_addr = &ixgbe_get_san_mac_addr_generic,
.get_device_caps = &ixgbe_get_device_caps_generic,
.get_wwn_prefix = &ixgbe_get_wwn_prefix_generic,
.stop_adapter = &ixgbe_stop_adapter_generic,
.get_bus_info = &ixgbe_get_bus_info_generic,
.set_lan_id = &ixgbe_set_lan_id_multi_port_pcie,
.read_analog_reg8 = NULL,
.write_analog_reg8 = NULL,
.setup_link = &ixgbe_setup_mac_link_X540,
.set_rxpba = &ixgbe_set_rxpba_generic,
.check_link = &ixgbe_check_mac_link_generic,
.get_link_capabilities = &ixgbe_get_copper_link_capabilities_generic,
.led_on = &ixgbe_led_on_generic,
.led_off = &ixgbe_led_off_generic,
.init_led_link_act = ixgbe_init_led_link_act_generic,
.blink_led_start = &ixgbe_blink_led_start_X540,
.blink_led_stop = &ixgbe_blink_led_stop_X540,
.set_rar = &ixgbe_set_rar_generic,
.clear_rar = &ixgbe_clear_rar_generic,
.set_vmdq = &ixgbe_set_vmdq_generic,
.set_vmdq_san_mac = &ixgbe_set_vmdq_san_mac_generic,
.clear_vmdq = &ixgbe_clear_vmdq_generic,
.init_rx_addrs = &ixgbe_init_rx_addrs_generic,
.update_mc_addr_list = &ixgbe_update_mc_addr_list_generic,
.enable_mc = &ixgbe_enable_mc_generic,
.disable_mc = &ixgbe_disable_mc_generic,
.clear_vfta = &ixgbe_clear_vfta_generic,
.set_vfta = &ixgbe_set_vfta_generic,
.fc_enable = &ixgbe_fc_enable_generic,
.setup_fc = ixgbe_setup_fc_generic,
.fc_autoneg = ixgbe_fc_autoneg,
.set_fw_drv_ver = &ixgbe_set_fw_drv_ver_generic,
.init_uta_tables = &ixgbe_init_uta_tables_generic,
.setup_sfp = NULL,
.set_mac_anti_spoofing = &ixgbe_set_mac_anti_spoofing,
.set_vlan_anti_spoofing = &ixgbe_set_vlan_anti_spoofing,
.acquire_swfw_sync = &ixgbe_acquire_swfw_sync_X540,
.release_swfw_sync = &ixgbe_release_swfw_sync_X540,
.init_swfw_sync = &ixgbe_init_swfw_sync_X540,
.disable_rx_buff = &ixgbe_disable_rx_buff_generic,
.enable_rx_buff = &ixgbe_enable_rx_buff_generic,
.get_thermal_sensor_data = NULL,
.init_thermal_sensor_thresh = NULL,
.prot_autoc_read = &prot_autoc_read_generic,
.prot_autoc_write = &prot_autoc_write_generic,
.enable_rx = &ixgbe_enable_rx_generic,
.disable_rx = &ixgbe_disable_rx_generic,
};
static const struct ixgbe_eeprom_operations eeprom_ops_X540 = {
.init_params = &ixgbe_init_eeprom_params_X540,
.read = &ixgbe_read_eerd_X540,
.read_buffer = &ixgbe_read_eerd_buffer_X540,
.write = &ixgbe_write_eewr_X540,
.write_buffer = &ixgbe_write_eewr_buffer_X540,
.calc_checksum = &ixgbe_calc_eeprom_checksum_X540,
.validate_checksum = &ixgbe_validate_eeprom_checksum_X540,
.update_checksum = &ixgbe_update_eeprom_checksum_X540,
};
static const struct ixgbe_phy_operations phy_ops_X540 = {
.identify = &ixgbe_identify_phy_generic,
.identify_sfp = &ixgbe_identify_sfp_module_generic,
.init = NULL,
.reset = NULL,
.read_reg = &ixgbe_read_phy_reg_generic,
.write_reg = &ixgbe_write_phy_reg_generic,
.setup_link = &ixgbe_setup_phy_link_generic,
.setup_link_speed = &ixgbe_setup_phy_link_speed_generic,
.read_i2c_byte = &ixgbe_read_i2c_byte_generic,
.write_i2c_byte = &ixgbe_write_i2c_byte_generic,
.read_i2c_sff8472 = &ixgbe_read_i2c_sff8472_generic,
.read_i2c_eeprom = &ixgbe_read_i2c_eeprom_generic,
.write_i2c_eeprom = &ixgbe_write_i2c_eeprom_generic,
.check_overtemp = &ixgbe_tn_check_overtemp,
.set_phy_power = &ixgbe_set_copper_phy_power,
};
static const u32 ixgbe_mvals_X540[IXGBE_MVALS_IDX_LIMIT] = {
IXGBE_MVALS_INIT(X540)
};
const struct ixgbe_info ixgbe_X540_info = {
.mac = ixgbe_mac_X540,
.get_invariants = &ixgbe_get_invariants_X540,
.mac_ops = &mac_ops_X540,
.eeprom_ops = &eeprom_ops_X540,
.phy_ops = &phy_ops_X540,
.mbx_ops = &mbx_ops_generic,
.mvals = ixgbe_mvals_X540,
};