| // SPDX-License-Identifier: GPL-2.0 | 
 | /* | 
 |  * Simple file system for zoned block devices exposing zones as files. | 
 |  * | 
 |  * Copyright (C) 2019 Western Digital Corporation or its affiliates. | 
 |  */ | 
 | #include <linux/module.h> | 
 | #include <linux/pagemap.h> | 
 | #include <linux/magic.h> | 
 | #include <linux/iomap.h> | 
 | #include <linux/init.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/blkdev.h> | 
 | #include <linux/statfs.h> | 
 | #include <linux/writeback.h> | 
 | #include <linux/quotaops.h> | 
 | #include <linux/seq_file.h> | 
 | #include <linux/parser.h> | 
 | #include <linux/uio.h> | 
 | #include <linux/mman.h> | 
 | #include <linux/sched/mm.h> | 
 | #include <linux/crc32.h> | 
 | #include <linux/task_io_accounting_ops.h> | 
 |  | 
 | #include "zonefs.h" | 
 |  | 
 | #define CREATE_TRACE_POINTS | 
 | #include "trace.h" | 
 |  | 
 | /* | 
 |  * Get the name of a zone group directory. | 
 |  */ | 
 | static const char *zonefs_zgroup_name(enum zonefs_ztype ztype) | 
 | { | 
 | 	switch (ztype) { | 
 | 	case ZONEFS_ZTYPE_CNV: | 
 | 		return "cnv"; | 
 | 	case ZONEFS_ZTYPE_SEQ: | 
 | 		return "seq"; | 
 | 	default: | 
 | 		WARN_ON_ONCE(1); | 
 | 		return "???"; | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * Manage the active zone count. | 
 |  */ | 
 | static void zonefs_account_active(struct super_block *sb, | 
 | 				  struct zonefs_zone *z) | 
 | { | 
 | 	struct zonefs_sb_info *sbi = ZONEFS_SB(sb); | 
 |  | 
 | 	if (zonefs_zone_is_cnv(z)) | 
 | 		return; | 
 |  | 
 | 	/* | 
 | 	 * For zones that transitioned to the offline or readonly condition, | 
 | 	 * we only need to clear the active state. | 
 | 	 */ | 
 | 	if (z->z_flags & (ZONEFS_ZONE_OFFLINE | ZONEFS_ZONE_READONLY)) | 
 | 		goto out; | 
 |  | 
 | 	/* | 
 | 	 * If the zone is active, that is, if it is explicitly open or | 
 | 	 * partially written, check if it was already accounted as active. | 
 | 	 */ | 
 | 	if ((z->z_flags & ZONEFS_ZONE_OPEN) || | 
 | 	    (z->z_wpoffset > 0 && z->z_wpoffset < z->z_capacity)) { | 
 | 		if (!(z->z_flags & ZONEFS_ZONE_ACTIVE)) { | 
 | 			z->z_flags |= ZONEFS_ZONE_ACTIVE; | 
 | 			atomic_inc(&sbi->s_active_seq_files); | 
 | 		} | 
 | 		return; | 
 | 	} | 
 |  | 
 | out: | 
 | 	/* The zone is not active. If it was, update the active count */ | 
 | 	if (z->z_flags & ZONEFS_ZONE_ACTIVE) { | 
 | 		z->z_flags &= ~ZONEFS_ZONE_ACTIVE; | 
 | 		atomic_dec(&sbi->s_active_seq_files); | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * Manage the active zone count. Called with zi->i_truncate_mutex held. | 
 |  */ | 
 | void zonefs_inode_account_active(struct inode *inode) | 
 | { | 
 | 	lockdep_assert_held(&ZONEFS_I(inode)->i_truncate_mutex); | 
 |  | 
 | 	return zonefs_account_active(inode->i_sb, zonefs_inode_zone(inode)); | 
 | } | 
 |  | 
 | /* | 
 |  * Execute a zone management operation. | 
 |  */ | 
 | static int zonefs_zone_mgmt(struct super_block *sb, | 
 | 			    struct zonefs_zone *z, enum req_op op) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	/* | 
 | 	 * With ZNS drives, closing an explicitly open zone that has not been | 
 | 	 * written will change the zone state to "closed", that is, the zone | 
 | 	 * will remain active. Since this can then cause failure of explicit | 
 | 	 * open operation on other zones if the drive active zone resources | 
 | 	 * are exceeded, make sure that the zone does not remain active by | 
 | 	 * resetting it. | 
 | 	 */ | 
 | 	if (op == REQ_OP_ZONE_CLOSE && !z->z_wpoffset) | 
 | 		op = REQ_OP_ZONE_RESET; | 
 |  | 
 | 	trace_zonefs_zone_mgmt(sb, z, op); | 
 | 	ret = blkdev_zone_mgmt(sb->s_bdev, op, z->z_sector, | 
 | 			       z->z_size >> SECTOR_SHIFT, GFP_NOFS); | 
 | 	if (ret) { | 
 | 		zonefs_err(sb, | 
 | 			   "Zone management operation %s at %llu failed %d\n", | 
 | 			   blk_op_str(op), z->z_sector, ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | int zonefs_inode_zone_mgmt(struct inode *inode, enum req_op op) | 
 | { | 
 | 	lockdep_assert_held(&ZONEFS_I(inode)->i_truncate_mutex); | 
 |  | 
 | 	return zonefs_zone_mgmt(inode->i_sb, zonefs_inode_zone(inode), op); | 
 | } | 
 |  | 
 | void zonefs_i_size_write(struct inode *inode, loff_t isize) | 
 | { | 
 | 	struct zonefs_zone *z = zonefs_inode_zone(inode); | 
 |  | 
 | 	i_size_write(inode, isize); | 
 |  | 
 | 	/* | 
 | 	 * A full zone is no longer open/active and does not need | 
 | 	 * explicit closing. | 
 | 	 */ | 
 | 	if (isize >= z->z_capacity) { | 
 | 		struct zonefs_sb_info *sbi = ZONEFS_SB(inode->i_sb); | 
 |  | 
 | 		if (z->z_flags & ZONEFS_ZONE_ACTIVE) | 
 | 			atomic_dec(&sbi->s_active_seq_files); | 
 | 		z->z_flags &= ~(ZONEFS_ZONE_OPEN | ZONEFS_ZONE_ACTIVE); | 
 | 	} | 
 | } | 
 |  | 
 | void zonefs_update_stats(struct inode *inode, loff_t new_isize) | 
 | { | 
 | 	struct super_block *sb = inode->i_sb; | 
 | 	struct zonefs_sb_info *sbi = ZONEFS_SB(sb); | 
 | 	loff_t old_isize = i_size_read(inode); | 
 | 	loff_t nr_blocks; | 
 |  | 
 | 	if (new_isize == old_isize) | 
 | 		return; | 
 |  | 
 | 	spin_lock(&sbi->s_lock); | 
 |  | 
 | 	/* | 
 | 	 * This may be called for an update after an IO error. | 
 | 	 * So beware of the values seen. | 
 | 	 */ | 
 | 	if (new_isize < old_isize) { | 
 | 		nr_blocks = (old_isize - new_isize) >> sb->s_blocksize_bits; | 
 | 		if (sbi->s_used_blocks > nr_blocks) | 
 | 			sbi->s_used_blocks -= nr_blocks; | 
 | 		else | 
 | 			sbi->s_used_blocks = 0; | 
 | 	} else { | 
 | 		sbi->s_used_blocks += | 
 | 			(new_isize - old_isize) >> sb->s_blocksize_bits; | 
 | 		if (sbi->s_used_blocks > sbi->s_blocks) | 
 | 			sbi->s_used_blocks = sbi->s_blocks; | 
 | 	} | 
 |  | 
 | 	spin_unlock(&sbi->s_lock); | 
 | } | 
 |  | 
 | /* | 
 |  * Check a zone condition. Return the amount of written (and still readable) | 
 |  * data in the zone. | 
 |  */ | 
 | static loff_t zonefs_check_zone_condition(struct super_block *sb, | 
 | 					  struct zonefs_zone *z, | 
 | 					  struct blk_zone *zone) | 
 | { | 
 | 	switch (zone->cond) { | 
 | 	case BLK_ZONE_COND_OFFLINE: | 
 | 		zonefs_warn(sb, "Zone %llu: offline zone\n", | 
 | 			    z->z_sector); | 
 | 		z->z_flags |= ZONEFS_ZONE_OFFLINE; | 
 | 		return 0; | 
 | 	case BLK_ZONE_COND_READONLY: | 
 | 		/* | 
 | 		 * The write pointer of read-only zones is invalid, so we cannot | 
 | 		 * determine the zone wpoffset (inode size). We thus keep the | 
 | 		 * zone wpoffset as is, which leads to an empty file | 
 | 		 * (wpoffset == 0) on mount. For a runtime error, this keeps | 
 | 		 * the inode size as it was when last updated so that the user | 
 | 		 * can recover data. | 
 | 		 */ | 
 | 		zonefs_warn(sb, "Zone %llu: read-only zone\n", | 
 | 			    z->z_sector); | 
 | 		z->z_flags |= ZONEFS_ZONE_READONLY; | 
 | 		if (zonefs_zone_is_cnv(z)) | 
 | 			return z->z_capacity; | 
 | 		return z->z_wpoffset; | 
 | 	case BLK_ZONE_COND_FULL: | 
 | 		/* The write pointer of full zones is invalid. */ | 
 | 		return z->z_capacity; | 
 | 	default: | 
 | 		if (zonefs_zone_is_cnv(z)) | 
 | 			return z->z_capacity; | 
 | 		return (zone->wp - zone->start) << SECTOR_SHIFT; | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * Check a zone condition and adjust its inode access permissions for | 
 |  * offline and readonly zones. | 
 |  */ | 
 | static void zonefs_inode_update_mode(struct inode *inode) | 
 | { | 
 | 	struct zonefs_zone *z = zonefs_inode_zone(inode); | 
 |  | 
 | 	if (z->z_flags & ZONEFS_ZONE_OFFLINE) { | 
 | 		/* Offline zones cannot be read nor written */ | 
 | 		inode->i_flags |= S_IMMUTABLE; | 
 | 		inode->i_mode &= ~0777; | 
 | 	} else if (z->z_flags & ZONEFS_ZONE_READONLY) { | 
 | 		/* Readonly zones cannot be written */ | 
 | 		inode->i_flags |= S_IMMUTABLE; | 
 | 		if (z->z_flags & ZONEFS_ZONE_INIT_MODE) | 
 | 			inode->i_mode &= ~0777; | 
 | 		else | 
 | 			inode->i_mode &= ~0222; | 
 | 	} | 
 |  | 
 | 	z->z_flags &= ~ZONEFS_ZONE_INIT_MODE; | 
 | } | 
 |  | 
 | static int zonefs_io_error_cb(struct blk_zone *zone, unsigned int idx, | 
 | 			      void *data) | 
 | { | 
 | 	struct blk_zone *z = data; | 
 |  | 
 | 	*z = *zone; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void zonefs_handle_io_error(struct inode *inode, struct blk_zone *zone, | 
 | 				   bool write) | 
 | { | 
 | 	struct zonefs_zone *z = zonefs_inode_zone(inode); | 
 | 	struct super_block *sb = inode->i_sb; | 
 | 	struct zonefs_sb_info *sbi = ZONEFS_SB(sb); | 
 | 	loff_t isize, data_size; | 
 |  | 
 | 	/* | 
 | 	 * Check the zone condition: if the zone is not "bad" (offline or | 
 | 	 * read-only), read errors are simply signaled to the IO issuer as long | 
 | 	 * as there is no inconsistency between the inode size and the amount of | 
 | 	 * data writen in the zone (data_size). | 
 | 	 */ | 
 | 	data_size = zonefs_check_zone_condition(sb, z, zone); | 
 | 	isize = i_size_read(inode); | 
 | 	if (!(z->z_flags & (ZONEFS_ZONE_READONLY | ZONEFS_ZONE_OFFLINE)) && | 
 | 	    !write && isize == data_size) | 
 | 		return; | 
 |  | 
 | 	/* | 
 | 	 * At this point, we detected either a bad zone or an inconsistency | 
 | 	 * between the inode size and the amount of data written in the zone. | 
 | 	 * For the latter case, the cause may be a write IO error or an external | 
 | 	 * action on the device. Two error patterns exist: | 
 | 	 * 1) The inode size is lower than the amount of data in the zone: | 
 | 	 *    a write operation partially failed and data was writen at the end | 
 | 	 *    of the file. This can happen in the case of a large direct IO | 
 | 	 *    needing several BIOs and/or write requests to be processed. | 
 | 	 * 2) The inode size is larger than the amount of data in the zone: | 
 | 	 *    this can happen with a deferred write error with the use of the | 
 | 	 *    device side write cache after getting successful write IO | 
 | 	 *    completions. Other possibilities are (a) an external corruption, | 
 | 	 *    e.g. an application reset the zone directly, or (b) the device | 
 | 	 *    has a serious problem (e.g. firmware bug). | 
 | 	 * | 
 | 	 * In all cases, warn about inode size inconsistency and handle the | 
 | 	 * IO error according to the zone condition and to the mount options. | 
 | 	 */ | 
 | 	if (isize != data_size) | 
 | 		zonefs_warn(sb, | 
 | 			    "inode %lu: invalid size %lld (should be %lld)\n", | 
 | 			    inode->i_ino, isize, data_size); | 
 |  | 
 | 	/* | 
 | 	 * First handle bad zones signaled by hardware. The mount options | 
 | 	 * errors=zone-ro and errors=zone-offline result in changing the | 
 | 	 * zone condition to read-only and offline respectively, as if the | 
 | 	 * condition was signaled by the hardware. | 
 | 	 */ | 
 | 	if ((z->z_flags & ZONEFS_ZONE_OFFLINE) || | 
 | 	    (sbi->s_mount_opts & ZONEFS_MNTOPT_ERRORS_ZOL)) { | 
 | 		zonefs_warn(sb, "inode %lu: read/write access disabled\n", | 
 | 			    inode->i_ino); | 
 | 		if (!(z->z_flags & ZONEFS_ZONE_OFFLINE)) | 
 | 			z->z_flags |= ZONEFS_ZONE_OFFLINE; | 
 | 		zonefs_inode_update_mode(inode); | 
 | 		data_size = 0; | 
 | 	} else if ((z->z_flags & ZONEFS_ZONE_READONLY) || | 
 | 		   (sbi->s_mount_opts & ZONEFS_MNTOPT_ERRORS_ZRO)) { | 
 | 		zonefs_warn(sb, "inode %lu: write access disabled\n", | 
 | 			    inode->i_ino); | 
 | 		if (!(z->z_flags & ZONEFS_ZONE_READONLY)) | 
 | 			z->z_flags |= ZONEFS_ZONE_READONLY; | 
 | 		zonefs_inode_update_mode(inode); | 
 | 		data_size = isize; | 
 | 	} else if (sbi->s_mount_opts & ZONEFS_MNTOPT_ERRORS_RO && | 
 | 		   data_size > isize) { | 
 | 		/* Do not expose garbage data */ | 
 | 		data_size = isize; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * If the filesystem is mounted with the explicit-open mount option, we | 
 | 	 * need to clear the ZONEFS_ZONE_OPEN flag if the zone transitioned to | 
 | 	 * the read-only or offline condition, to avoid attempting an explicit | 
 | 	 * close of the zone when the inode file is closed. | 
 | 	 */ | 
 | 	if ((sbi->s_mount_opts & ZONEFS_MNTOPT_EXPLICIT_OPEN) && | 
 | 	    (z->z_flags & (ZONEFS_ZONE_READONLY | ZONEFS_ZONE_OFFLINE))) | 
 | 		z->z_flags &= ~ZONEFS_ZONE_OPEN; | 
 |  | 
 | 	/* | 
 | 	 * If error=remount-ro was specified, any error result in remounting | 
 | 	 * the volume as read-only. | 
 | 	 */ | 
 | 	if ((sbi->s_mount_opts & ZONEFS_MNTOPT_ERRORS_RO) && !sb_rdonly(sb)) { | 
 | 		zonefs_warn(sb, "remounting filesystem read-only\n"); | 
 | 		sb->s_flags |= SB_RDONLY; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Update block usage stats and the inode size  to prevent access to | 
 | 	 * invalid data. | 
 | 	 */ | 
 | 	zonefs_update_stats(inode, data_size); | 
 | 	zonefs_i_size_write(inode, data_size); | 
 | 	z->z_wpoffset = data_size; | 
 | 	zonefs_inode_account_active(inode); | 
 | } | 
 |  | 
 | /* | 
 |  * When an file IO error occurs, check the file zone to see if there is a change | 
 |  * in the zone condition (e.g. offline or read-only). For a failed write to a | 
 |  * sequential zone, the zone write pointer position must also be checked to | 
 |  * eventually correct the file size and zonefs inode write pointer offset | 
 |  * (which can be out of sync with the drive due to partial write failures). | 
 |  */ | 
 | void __zonefs_io_error(struct inode *inode, bool write) | 
 | { | 
 | 	struct zonefs_zone *z = zonefs_inode_zone(inode); | 
 | 	struct super_block *sb = inode->i_sb; | 
 | 	unsigned int noio_flag; | 
 | 	struct blk_zone zone; | 
 | 	int ret; | 
 |  | 
 | 	/* | 
 | 	 * Conventional zone have no write pointer and cannot become read-only | 
 | 	 * or offline. So simply fake a report for a single or aggregated zone | 
 | 	 * and let zonefs_handle_io_error() correct the zone inode information | 
 | 	 * according to the mount options. | 
 | 	 */ | 
 | 	if (!zonefs_zone_is_seq(z)) { | 
 | 		zone.start = z->z_sector; | 
 | 		zone.len = z->z_size >> SECTOR_SHIFT; | 
 | 		zone.wp = zone.start + zone.len; | 
 | 		zone.type = BLK_ZONE_TYPE_CONVENTIONAL; | 
 | 		zone.cond = BLK_ZONE_COND_NOT_WP; | 
 | 		zone.capacity = zone.len; | 
 | 		goto handle_io_error; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Memory allocations in blkdev_report_zones() can trigger a memory | 
 | 	 * reclaim which may in turn cause a recursion into zonefs as well as | 
 | 	 * struct request allocations for the same device. The former case may | 
 | 	 * end up in a deadlock on the inode truncate mutex, while the latter | 
 | 	 * may prevent IO forward progress. Executing the report zones under | 
 | 	 * the GFP_NOIO context avoids both problems. | 
 | 	 */ | 
 | 	noio_flag = memalloc_noio_save(); | 
 | 	ret = blkdev_report_zones(sb->s_bdev, z->z_sector, 1, | 
 | 				  zonefs_io_error_cb, &zone); | 
 | 	memalloc_noio_restore(noio_flag); | 
 |  | 
 | 	if (ret != 1) { | 
 | 		zonefs_err(sb, "Get inode %lu zone information failed %d\n", | 
 | 			   inode->i_ino, ret); | 
 | 		zonefs_warn(sb, "remounting filesystem read-only\n"); | 
 | 		sb->s_flags |= SB_RDONLY; | 
 | 		return; | 
 | 	} | 
 |  | 
 | handle_io_error: | 
 | 	zonefs_handle_io_error(inode, &zone, write); | 
 | } | 
 |  | 
 | static struct kmem_cache *zonefs_inode_cachep; | 
 |  | 
 | static struct inode *zonefs_alloc_inode(struct super_block *sb) | 
 | { | 
 | 	struct zonefs_inode_info *zi; | 
 |  | 
 | 	zi = alloc_inode_sb(sb, zonefs_inode_cachep, GFP_KERNEL); | 
 | 	if (!zi) | 
 | 		return NULL; | 
 |  | 
 | 	inode_init_once(&zi->i_vnode); | 
 | 	mutex_init(&zi->i_truncate_mutex); | 
 | 	zi->i_wr_refcnt = 0; | 
 |  | 
 | 	return &zi->i_vnode; | 
 | } | 
 |  | 
 | static void zonefs_free_inode(struct inode *inode) | 
 | { | 
 | 	kmem_cache_free(zonefs_inode_cachep, ZONEFS_I(inode)); | 
 | } | 
 |  | 
 | /* | 
 |  * File system stat. | 
 |  */ | 
 | static int zonefs_statfs(struct dentry *dentry, struct kstatfs *buf) | 
 | { | 
 | 	struct super_block *sb = dentry->d_sb; | 
 | 	struct zonefs_sb_info *sbi = ZONEFS_SB(sb); | 
 | 	enum zonefs_ztype t; | 
 |  | 
 | 	buf->f_type = ZONEFS_MAGIC; | 
 | 	buf->f_bsize = sb->s_blocksize; | 
 | 	buf->f_namelen = ZONEFS_NAME_MAX; | 
 |  | 
 | 	spin_lock(&sbi->s_lock); | 
 |  | 
 | 	buf->f_blocks = sbi->s_blocks; | 
 | 	if (WARN_ON(sbi->s_used_blocks > sbi->s_blocks)) | 
 | 		buf->f_bfree = 0; | 
 | 	else | 
 | 		buf->f_bfree = buf->f_blocks - sbi->s_used_blocks; | 
 | 	buf->f_bavail = buf->f_bfree; | 
 |  | 
 | 	for (t = 0; t < ZONEFS_ZTYPE_MAX; t++) { | 
 | 		if (sbi->s_zgroup[t].g_nr_zones) | 
 | 			buf->f_files += sbi->s_zgroup[t].g_nr_zones + 1; | 
 | 	} | 
 | 	buf->f_ffree = 0; | 
 |  | 
 | 	spin_unlock(&sbi->s_lock); | 
 |  | 
 | 	buf->f_fsid = uuid_to_fsid(sbi->s_uuid.b); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | enum { | 
 | 	Opt_errors_ro, Opt_errors_zro, Opt_errors_zol, Opt_errors_repair, | 
 | 	Opt_explicit_open, Opt_err, | 
 | }; | 
 |  | 
 | static const match_table_t tokens = { | 
 | 	{ Opt_errors_ro,	"errors=remount-ro"}, | 
 | 	{ Opt_errors_zro,	"errors=zone-ro"}, | 
 | 	{ Opt_errors_zol,	"errors=zone-offline"}, | 
 | 	{ Opt_errors_repair,	"errors=repair"}, | 
 | 	{ Opt_explicit_open,	"explicit-open" }, | 
 | 	{ Opt_err,		NULL} | 
 | }; | 
 |  | 
 | static int zonefs_parse_options(struct super_block *sb, char *options) | 
 | { | 
 | 	struct zonefs_sb_info *sbi = ZONEFS_SB(sb); | 
 | 	substring_t args[MAX_OPT_ARGS]; | 
 | 	char *p; | 
 |  | 
 | 	if (!options) | 
 | 		return 0; | 
 |  | 
 | 	while ((p = strsep(&options, ",")) != NULL) { | 
 | 		int token; | 
 |  | 
 | 		if (!*p) | 
 | 			continue; | 
 |  | 
 | 		token = match_token(p, tokens, args); | 
 | 		switch (token) { | 
 | 		case Opt_errors_ro: | 
 | 			sbi->s_mount_opts &= ~ZONEFS_MNTOPT_ERRORS_MASK; | 
 | 			sbi->s_mount_opts |= ZONEFS_MNTOPT_ERRORS_RO; | 
 | 			break; | 
 | 		case Opt_errors_zro: | 
 | 			sbi->s_mount_opts &= ~ZONEFS_MNTOPT_ERRORS_MASK; | 
 | 			sbi->s_mount_opts |= ZONEFS_MNTOPT_ERRORS_ZRO; | 
 | 			break; | 
 | 		case Opt_errors_zol: | 
 | 			sbi->s_mount_opts &= ~ZONEFS_MNTOPT_ERRORS_MASK; | 
 | 			sbi->s_mount_opts |= ZONEFS_MNTOPT_ERRORS_ZOL; | 
 | 			break; | 
 | 		case Opt_errors_repair: | 
 | 			sbi->s_mount_opts &= ~ZONEFS_MNTOPT_ERRORS_MASK; | 
 | 			sbi->s_mount_opts |= ZONEFS_MNTOPT_ERRORS_REPAIR; | 
 | 			break; | 
 | 		case Opt_explicit_open: | 
 | 			sbi->s_mount_opts |= ZONEFS_MNTOPT_EXPLICIT_OPEN; | 
 | 			break; | 
 | 		default: | 
 | 			return -EINVAL; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int zonefs_show_options(struct seq_file *seq, struct dentry *root) | 
 | { | 
 | 	struct zonefs_sb_info *sbi = ZONEFS_SB(root->d_sb); | 
 |  | 
 | 	if (sbi->s_mount_opts & ZONEFS_MNTOPT_ERRORS_RO) | 
 | 		seq_puts(seq, ",errors=remount-ro"); | 
 | 	if (sbi->s_mount_opts & ZONEFS_MNTOPT_ERRORS_ZRO) | 
 | 		seq_puts(seq, ",errors=zone-ro"); | 
 | 	if (sbi->s_mount_opts & ZONEFS_MNTOPT_ERRORS_ZOL) | 
 | 		seq_puts(seq, ",errors=zone-offline"); | 
 | 	if (sbi->s_mount_opts & ZONEFS_MNTOPT_ERRORS_REPAIR) | 
 | 		seq_puts(seq, ",errors=repair"); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int zonefs_remount(struct super_block *sb, int *flags, char *data) | 
 | { | 
 | 	sync_filesystem(sb); | 
 |  | 
 | 	return zonefs_parse_options(sb, data); | 
 | } | 
 |  | 
 | static int zonefs_inode_setattr(struct user_namespace *mnt_userns, | 
 | 				struct dentry *dentry, struct iattr *iattr) | 
 | { | 
 | 	struct inode *inode = d_inode(dentry); | 
 | 	int ret; | 
 |  | 
 | 	if (unlikely(IS_IMMUTABLE(inode))) | 
 | 		return -EPERM; | 
 |  | 
 | 	ret = setattr_prepare(&init_user_ns, dentry, iattr); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	/* | 
 | 	 * Since files and directories cannot be created nor deleted, do not | 
 | 	 * allow setting any write attributes on the sub-directories grouping | 
 | 	 * files by zone type. | 
 | 	 */ | 
 | 	if ((iattr->ia_valid & ATTR_MODE) && S_ISDIR(inode->i_mode) && | 
 | 	    (iattr->ia_mode & 0222)) | 
 | 		return -EPERM; | 
 |  | 
 | 	if (((iattr->ia_valid & ATTR_UID) && | 
 | 	     !uid_eq(iattr->ia_uid, inode->i_uid)) || | 
 | 	    ((iattr->ia_valid & ATTR_GID) && | 
 | 	     !gid_eq(iattr->ia_gid, inode->i_gid))) { | 
 | 		ret = dquot_transfer(mnt_userns, inode, iattr); | 
 | 		if (ret) | 
 | 			return ret; | 
 | 	} | 
 |  | 
 | 	if (iattr->ia_valid & ATTR_SIZE) { | 
 | 		ret = zonefs_file_truncate(inode, iattr->ia_size); | 
 | 		if (ret) | 
 | 			return ret; | 
 | 	} | 
 |  | 
 | 	setattr_copy(&init_user_ns, inode, iattr); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct inode_operations zonefs_dir_inode_operations = { | 
 | 	.lookup		= simple_lookup, | 
 | 	.setattr	= zonefs_inode_setattr, | 
 | }; | 
 |  | 
 | static void zonefs_init_dir_inode(struct inode *parent, struct inode *inode, | 
 | 				  enum zonefs_ztype ztype) | 
 | { | 
 | 	struct super_block *sb = parent->i_sb; | 
 |  | 
 | 	inode->i_ino = bdev_nr_zones(sb->s_bdev) + ztype + 1; | 
 | 	inode_init_owner(&init_user_ns, inode, parent, S_IFDIR | 0555); | 
 | 	inode->i_op = &zonefs_dir_inode_operations; | 
 | 	inode->i_fop = &simple_dir_operations; | 
 | 	set_nlink(inode, 2); | 
 | 	inc_nlink(parent); | 
 | } | 
 |  | 
 | static const struct inode_operations zonefs_file_inode_operations = { | 
 | 	.setattr	= zonefs_inode_setattr, | 
 | }; | 
 |  | 
 | static void zonefs_init_file_inode(struct inode *inode, | 
 | 				   struct zonefs_zone *z) | 
 | { | 
 | 	struct super_block *sb = inode->i_sb; | 
 | 	struct zonefs_sb_info *sbi = ZONEFS_SB(sb); | 
 |  | 
 | 	inode->i_private = z; | 
 |  | 
 | 	inode->i_ino = z->z_sector >> sbi->s_zone_sectors_shift; | 
 | 	inode->i_mode = S_IFREG | sbi->s_perm; | 
 | 	inode->i_uid = sbi->s_uid; | 
 | 	inode->i_gid = sbi->s_gid; | 
 | 	inode->i_size = z->z_wpoffset; | 
 | 	inode->i_blocks = z->z_capacity >> SECTOR_SHIFT; | 
 |  | 
 | 	inode->i_op = &zonefs_file_inode_operations; | 
 | 	inode->i_fop = &zonefs_file_operations; | 
 | 	inode->i_mapping->a_ops = &zonefs_file_aops; | 
 |  | 
 | 	/* Update the inode access rights depending on the zone condition */ | 
 | 	z->z_flags |= ZONEFS_ZONE_INIT_MODE; | 
 | 	zonefs_inode_update_mode(inode); | 
 | } | 
 |  | 
 | static struct dentry *zonefs_create_inode(struct dentry *parent, | 
 | 					  const char *name, | 
 | 					  struct zonefs_zone *z, | 
 | 					  enum zonefs_ztype ztype) | 
 | { | 
 | 	struct inode *dir = d_inode(parent); | 
 | 	struct dentry *dentry; | 
 | 	struct inode *inode; | 
 | 	int ret = -ENOMEM; | 
 |  | 
 | 	dentry = d_alloc_name(parent, name); | 
 | 	if (!dentry) | 
 | 		return ERR_PTR(ret); | 
 |  | 
 | 	inode = new_inode(parent->d_sb); | 
 | 	if (!inode) | 
 | 		goto dput; | 
 |  | 
 | 	inode->i_ctime = inode->i_mtime = inode->i_atime = dir->i_ctime; | 
 | 	if (z) | 
 | 		zonefs_init_file_inode(inode, z); | 
 | 	else | 
 | 		zonefs_init_dir_inode(dir, inode, ztype); | 
 |  | 
 | 	d_add(dentry, inode); | 
 | 	dir->i_size++; | 
 |  | 
 | 	return dentry; | 
 |  | 
 | dput: | 
 | 	dput(dentry); | 
 |  | 
 | 	return ERR_PTR(ret); | 
 | } | 
 |  | 
 | struct zonefs_zone_data { | 
 | 	struct super_block	*sb; | 
 | 	unsigned int		nr_zones[ZONEFS_ZTYPE_MAX]; | 
 | 	sector_t		cnv_zone_start; | 
 | 	struct blk_zone		*zones; | 
 | }; | 
 |  | 
 | /* | 
 |  * Create the inodes for a zone group. | 
 |  */ | 
 | static int zonefs_create_zgroup_inodes(struct super_block *sb, | 
 | 				       enum zonefs_ztype ztype) | 
 | { | 
 | 	struct zonefs_sb_info *sbi = ZONEFS_SB(sb); | 
 | 	struct zonefs_zone_group *zgroup = &sbi->s_zgroup[ztype]; | 
 | 	struct dentry *dir, *dent; | 
 | 	char *file_name; | 
 | 	int i, ret = 0; | 
 |  | 
 | 	if (!zgroup) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	/* If the group is empty, there is nothing to do */ | 
 | 	if (!zgroup->g_nr_zones) | 
 | 		return 0; | 
 |  | 
 | 	file_name = kmalloc(ZONEFS_NAME_MAX, GFP_KERNEL); | 
 | 	if (!file_name) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	dir = zonefs_create_inode(sb->s_root, zonefs_zgroup_name(ztype), | 
 | 				  NULL, ztype); | 
 | 	if (IS_ERR(dir)) { | 
 | 		ret = PTR_ERR(dir); | 
 | 		goto free; | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < zgroup->g_nr_zones; i++) { | 
 | 		/* Use the zone number within its group as the file name */ | 
 | 		snprintf(file_name, ZONEFS_NAME_MAX - 1, "%u", i); | 
 | 		dent = zonefs_create_inode(dir, file_name, | 
 | 					   &zgroup->g_zones[i], ztype); | 
 | 		if (IS_ERR(dent)) { | 
 | 			ret = PTR_ERR(dent); | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | free: | 
 | 	kfree(file_name); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int zonefs_get_zone_info_cb(struct blk_zone *zone, unsigned int idx, | 
 | 				   void *data) | 
 | { | 
 | 	struct zonefs_zone_data *zd = data; | 
 | 	struct super_block *sb = zd->sb; | 
 | 	struct zonefs_sb_info *sbi = ZONEFS_SB(sb); | 
 |  | 
 | 	/* | 
 | 	 * We do not care about the first zone: it contains the super block | 
 | 	 * and not exposed as a file. | 
 | 	 */ | 
 | 	if (!idx) | 
 | 		return 0; | 
 |  | 
 | 	/* | 
 | 	 * Count the number of zones that will be exposed as files. | 
 | 	 * For sequential zones, we always have as many files as zones. | 
 | 	 * FOr conventional zones, the number of files depends on if we have | 
 | 	 * conventional zones aggregation enabled. | 
 | 	 */ | 
 | 	switch (zone->type) { | 
 | 	case BLK_ZONE_TYPE_CONVENTIONAL: | 
 | 		if (sbi->s_features & ZONEFS_F_AGGRCNV) { | 
 | 			/* One file per set of contiguous conventional zones */ | 
 | 			if (!(sbi->s_zgroup[ZONEFS_ZTYPE_CNV].g_nr_zones) || | 
 | 			    zone->start != zd->cnv_zone_start) | 
 | 				sbi->s_zgroup[ZONEFS_ZTYPE_CNV].g_nr_zones++; | 
 | 			zd->cnv_zone_start = zone->start + zone->len; | 
 | 		} else { | 
 | 			/* One file per zone */ | 
 | 			sbi->s_zgroup[ZONEFS_ZTYPE_CNV].g_nr_zones++; | 
 | 		} | 
 | 		break; | 
 | 	case BLK_ZONE_TYPE_SEQWRITE_REQ: | 
 | 	case BLK_ZONE_TYPE_SEQWRITE_PREF: | 
 | 		sbi->s_zgroup[ZONEFS_ZTYPE_SEQ].g_nr_zones++; | 
 | 		break; | 
 | 	default: | 
 | 		zonefs_err(zd->sb, "Unsupported zone type 0x%x\n", | 
 | 			   zone->type); | 
 | 		return -EIO; | 
 | 	} | 
 |  | 
 | 	memcpy(&zd->zones[idx], zone, sizeof(struct blk_zone)); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int zonefs_get_zone_info(struct zonefs_zone_data *zd) | 
 | { | 
 | 	struct block_device *bdev = zd->sb->s_bdev; | 
 | 	int ret; | 
 |  | 
 | 	zd->zones = kvcalloc(bdev_nr_zones(bdev), sizeof(struct blk_zone), | 
 | 			     GFP_KERNEL); | 
 | 	if (!zd->zones) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	/* Get zones information from the device */ | 
 | 	ret = blkdev_report_zones(bdev, 0, BLK_ALL_ZONES, | 
 | 				  zonefs_get_zone_info_cb, zd); | 
 | 	if (ret < 0) { | 
 | 		zonefs_err(zd->sb, "Zone report failed %d\n", ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	if (ret != bdev_nr_zones(bdev)) { | 
 | 		zonefs_err(zd->sb, "Invalid zone report (%d/%u zones)\n", | 
 | 			   ret, bdev_nr_zones(bdev)); | 
 | 		return -EIO; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static inline void zonefs_free_zone_info(struct zonefs_zone_data *zd) | 
 | { | 
 | 	kvfree(zd->zones); | 
 | } | 
 |  | 
 | /* | 
 |  * Create a zone group and populate it with zone files. | 
 |  */ | 
 | static int zonefs_init_zgroup(struct super_block *sb, | 
 | 			      struct zonefs_zone_data *zd, | 
 | 			      enum zonefs_ztype ztype) | 
 | { | 
 | 	struct zonefs_sb_info *sbi = ZONEFS_SB(sb); | 
 | 	struct zonefs_zone_group *zgroup = &sbi->s_zgroup[ztype]; | 
 | 	struct blk_zone *zone, *next, *end; | 
 | 	struct zonefs_zone *z; | 
 | 	unsigned int n = 0; | 
 | 	int ret; | 
 |  | 
 | 	/* Allocate the zone group. If it is empty, we have nothing to do. */ | 
 | 	if (!zgroup->g_nr_zones) | 
 | 		return 0; | 
 |  | 
 | 	zgroup->g_zones = kvcalloc(zgroup->g_nr_zones, | 
 | 				   sizeof(struct zonefs_zone), GFP_KERNEL); | 
 | 	if (!zgroup->g_zones) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	/* | 
 | 	 * Initialize the zone groups using the device zone information. | 
 | 	 * We always skip the first zone as it contains the super block | 
 | 	 * and is not use to back a file. | 
 | 	 */ | 
 | 	end = zd->zones + bdev_nr_zones(sb->s_bdev); | 
 | 	for (zone = &zd->zones[1]; zone < end; zone = next) { | 
 |  | 
 | 		next = zone + 1; | 
 | 		if (zonefs_zone_type(zone) != ztype) | 
 | 			continue; | 
 |  | 
 | 		if (WARN_ON_ONCE(n >= zgroup->g_nr_zones)) | 
 | 			return -EINVAL; | 
 |  | 
 | 		/* | 
 | 		 * For conventional zones, contiguous zones can be aggregated | 
 | 		 * together to form larger files. Note that this overwrites the | 
 | 		 * length of the first zone of the set of contiguous zones | 
 | 		 * aggregated together. If one offline or read-only zone is | 
 | 		 * found, assume that all zones aggregated have the same | 
 | 		 * condition. | 
 | 		 */ | 
 | 		if (ztype == ZONEFS_ZTYPE_CNV && | 
 | 		    (sbi->s_features & ZONEFS_F_AGGRCNV)) { | 
 | 			for (; next < end; next++) { | 
 | 				if (zonefs_zone_type(next) != ztype) | 
 | 					break; | 
 | 				zone->len += next->len; | 
 | 				zone->capacity += next->capacity; | 
 | 				if (next->cond == BLK_ZONE_COND_READONLY && | 
 | 				    zone->cond != BLK_ZONE_COND_OFFLINE) | 
 | 					zone->cond = BLK_ZONE_COND_READONLY; | 
 | 				else if (next->cond == BLK_ZONE_COND_OFFLINE) | 
 | 					zone->cond = BLK_ZONE_COND_OFFLINE; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		z = &zgroup->g_zones[n]; | 
 | 		if (ztype == ZONEFS_ZTYPE_CNV) | 
 | 			z->z_flags |= ZONEFS_ZONE_CNV; | 
 | 		z->z_sector = zone->start; | 
 | 		z->z_size = zone->len << SECTOR_SHIFT; | 
 | 		if (z->z_size > bdev_zone_sectors(sb->s_bdev) << SECTOR_SHIFT && | 
 | 		    !(sbi->s_features & ZONEFS_F_AGGRCNV)) { | 
 | 			zonefs_err(sb, | 
 | 				"Invalid zone size %llu (device zone sectors %llu)\n", | 
 | 				z->z_size, | 
 | 				bdev_zone_sectors(sb->s_bdev) << SECTOR_SHIFT); | 
 | 			return -EINVAL; | 
 | 		} | 
 |  | 
 | 		z->z_capacity = min_t(loff_t, MAX_LFS_FILESIZE, | 
 | 				      zone->capacity << SECTOR_SHIFT); | 
 | 		z->z_wpoffset = zonefs_check_zone_condition(sb, z, zone); | 
 |  | 
 | 		sb->s_maxbytes = max(z->z_capacity, sb->s_maxbytes); | 
 | 		sbi->s_blocks += z->z_capacity >> sb->s_blocksize_bits; | 
 | 		sbi->s_used_blocks += z->z_wpoffset >> sb->s_blocksize_bits; | 
 |  | 
 | 		/* | 
 | 		 * For sequential zones, make sure that any open zone is closed | 
 | 		 * first to ensure that the initial number of open zones is 0, | 
 | 		 * in sync with the open zone accounting done when the mount | 
 | 		 * option ZONEFS_MNTOPT_EXPLICIT_OPEN is used. | 
 | 		 */ | 
 | 		if (ztype == ZONEFS_ZTYPE_SEQ && | 
 | 		    (zone->cond == BLK_ZONE_COND_IMP_OPEN || | 
 | 		     zone->cond == BLK_ZONE_COND_EXP_OPEN)) { | 
 | 			ret = zonefs_zone_mgmt(sb, z, REQ_OP_ZONE_CLOSE); | 
 | 			if (ret) | 
 | 				return ret; | 
 | 		} | 
 |  | 
 | 		zonefs_account_active(sb, z); | 
 |  | 
 | 		n++; | 
 | 	} | 
 |  | 
 | 	if (WARN_ON_ONCE(n != zgroup->g_nr_zones)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	zonefs_info(sb, "Zone group \"%s\" has %u file%s\n", | 
 | 		    zonefs_zgroup_name(ztype), | 
 | 		    zgroup->g_nr_zones, | 
 | 		    zgroup->g_nr_zones > 1 ? "s" : ""); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void zonefs_free_zgroups(struct super_block *sb) | 
 | { | 
 | 	struct zonefs_sb_info *sbi = ZONEFS_SB(sb); | 
 | 	enum zonefs_ztype ztype; | 
 |  | 
 | 	if (!sbi) | 
 | 		return; | 
 |  | 
 | 	for (ztype = 0; ztype < ZONEFS_ZTYPE_MAX; ztype++) { | 
 | 		kvfree(sbi->s_zgroup[ztype].g_zones); | 
 | 		sbi->s_zgroup[ztype].g_zones = NULL; | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * Create a zone group and populate it with zone files. | 
 |  */ | 
 | static int zonefs_init_zgroups(struct super_block *sb) | 
 | { | 
 | 	struct zonefs_zone_data zd; | 
 | 	enum zonefs_ztype ztype; | 
 | 	int ret; | 
 |  | 
 | 	/* First get the device zone information */ | 
 | 	memset(&zd, 0, sizeof(struct zonefs_zone_data)); | 
 | 	zd.sb = sb; | 
 | 	ret = zonefs_get_zone_info(&zd); | 
 | 	if (ret) | 
 | 		goto cleanup; | 
 |  | 
 | 	/* Allocate and initialize the zone groups */ | 
 | 	for (ztype = 0; ztype < ZONEFS_ZTYPE_MAX; ztype++) { | 
 | 		ret = zonefs_init_zgroup(sb, &zd, ztype); | 
 | 		if (ret) { | 
 | 			zonefs_info(sb, | 
 | 				    "Zone group \"%s\" initialization failed\n", | 
 | 				    zonefs_zgroup_name(ztype)); | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | cleanup: | 
 | 	zonefs_free_zone_info(&zd); | 
 | 	if (ret) | 
 | 		zonefs_free_zgroups(sb); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * Read super block information from the device. | 
 |  */ | 
 | static int zonefs_read_super(struct super_block *sb) | 
 | { | 
 | 	struct zonefs_sb_info *sbi = ZONEFS_SB(sb); | 
 | 	struct zonefs_super *super; | 
 | 	u32 crc, stored_crc; | 
 | 	struct page *page; | 
 | 	struct bio_vec bio_vec; | 
 | 	struct bio bio; | 
 | 	int ret; | 
 |  | 
 | 	page = alloc_page(GFP_KERNEL); | 
 | 	if (!page) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	bio_init(&bio, sb->s_bdev, &bio_vec, 1, REQ_OP_READ); | 
 | 	bio.bi_iter.bi_sector = 0; | 
 | 	bio_add_page(&bio, page, PAGE_SIZE, 0); | 
 |  | 
 | 	ret = submit_bio_wait(&bio); | 
 | 	if (ret) | 
 | 		goto free_page; | 
 |  | 
 | 	super = page_address(page); | 
 |  | 
 | 	ret = -EINVAL; | 
 | 	if (le32_to_cpu(super->s_magic) != ZONEFS_MAGIC) | 
 | 		goto free_page; | 
 |  | 
 | 	stored_crc = le32_to_cpu(super->s_crc); | 
 | 	super->s_crc = 0; | 
 | 	crc = crc32(~0U, (unsigned char *)super, sizeof(struct zonefs_super)); | 
 | 	if (crc != stored_crc) { | 
 | 		zonefs_err(sb, "Invalid checksum (Expected 0x%08x, got 0x%08x)", | 
 | 			   crc, stored_crc); | 
 | 		goto free_page; | 
 | 	} | 
 |  | 
 | 	sbi->s_features = le64_to_cpu(super->s_features); | 
 | 	if (sbi->s_features & ~ZONEFS_F_DEFINED_FEATURES) { | 
 | 		zonefs_err(sb, "Unknown features set 0x%llx\n", | 
 | 			   sbi->s_features); | 
 | 		goto free_page; | 
 | 	} | 
 |  | 
 | 	if (sbi->s_features & ZONEFS_F_UID) { | 
 | 		sbi->s_uid = make_kuid(current_user_ns(), | 
 | 				       le32_to_cpu(super->s_uid)); | 
 | 		if (!uid_valid(sbi->s_uid)) { | 
 | 			zonefs_err(sb, "Invalid UID feature\n"); | 
 | 			goto free_page; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (sbi->s_features & ZONEFS_F_GID) { | 
 | 		sbi->s_gid = make_kgid(current_user_ns(), | 
 | 				       le32_to_cpu(super->s_gid)); | 
 | 		if (!gid_valid(sbi->s_gid)) { | 
 | 			zonefs_err(sb, "Invalid GID feature\n"); | 
 | 			goto free_page; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (sbi->s_features & ZONEFS_F_PERM) | 
 | 		sbi->s_perm = le32_to_cpu(super->s_perm); | 
 |  | 
 | 	if (memchr_inv(super->s_reserved, 0, sizeof(super->s_reserved))) { | 
 | 		zonefs_err(sb, "Reserved area is being used\n"); | 
 | 		goto free_page; | 
 | 	} | 
 |  | 
 | 	import_uuid(&sbi->s_uuid, super->s_uuid); | 
 | 	ret = 0; | 
 |  | 
 | free_page: | 
 | 	__free_page(page); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static const struct super_operations zonefs_sops = { | 
 | 	.alloc_inode	= zonefs_alloc_inode, | 
 | 	.free_inode	= zonefs_free_inode, | 
 | 	.statfs		= zonefs_statfs, | 
 | 	.remount_fs	= zonefs_remount, | 
 | 	.show_options	= zonefs_show_options, | 
 | }; | 
 |  | 
 | /* | 
 |  * Check that the device is zoned. If it is, get the list of zones and create | 
 |  * sub-directories and files according to the device zone configuration and | 
 |  * format options. | 
 |  */ | 
 | static int zonefs_fill_super(struct super_block *sb, void *data, int silent) | 
 | { | 
 | 	struct zonefs_sb_info *sbi; | 
 | 	struct inode *inode; | 
 | 	enum zonefs_ztype t; | 
 | 	int ret; | 
 |  | 
 | 	if (!bdev_is_zoned(sb->s_bdev)) { | 
 | 		zonefs_err(sb, "Not a zoned block device\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Initialize super block information: the maximum file size is updated | 
 | 	 * when the zone files are created so that the format option | 
 | 	 * ZONEFS_F_AGGRCNV which increases the maximum file size of a file | 
 | 	 * beyond the zone size is taken into account. | 
 | 	 */ | 
 | 	sbi = kzalloc(sizeof(*sbi), GFP_KERNEL); | 
 | 	if (!sbi) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	spin_lock_init(&sbi->s_lock); | 
 | 	sb->s_fs_info = sbi; | 
 | 	sb->s_magic = ZONEFS_MAGIC; | 
 | 	sb->s_maxbytes = 0; | 
 | 	sb->s_op = &zonefs_sops; | 
 | 	sb->s_time_gran	= 1; | 
 |  | 
 | 	/* | 
 | 	 * The block size is set to the device zone write granularity to ensure | 
 | 	 * that write operations are always aligned according to the device | 
 | 	 * interface constraints. | 
 | 	 */ | 
 | 	sb_set_blocksize(sb, bdev_zone_write_granularity(sb->s_bdev)); | 
 | 	sbi->s_zone_sectors_shift = ilog2(bdev_zone_sectors(sb->s_bdev)); | 
 | 	sbi->s_uid = GLOBAL_ROOT_UID; | 
 | 	sbi->s_gid = GLOBAL_ROOT_GID; | 
 | 	sbi->s_perm = 0640; | 
 | 	sbi->s_mount_opts = ZONEFS_MNTOPT_ERRORS_RO; | 
 |  | 
 | 	atomic_set(&sbi->s_wro_seq_files, 0); | 
 | 	sbi->s_max_wro_seq_files = bdev_max_open_zones(sb->s_bdev); | 
 | 	atomic_set(&sbi->s_active_seq_files, 0); | 
 | 	sbi->s_max_active_seq_files = bdev_max_active_zones(sb->s_bdev); | 
 |  | 
 | 	ret = zonefs_read_super(sb); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	ret = zonefs_parse_options(sb, data); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	zonefs_info(sb, "Mounting %u zones", bdev_nr_zones(sb->s_bdev)); | 
 |  | 
 | 	if (!sbi->s_max_wro_seq_files && | 
 | 	    !sbi->s_max_active_seq_files && | 
 | 	    sbi->s_mount_opts & ZONEFS_MNTOPT_EXPLICIT_OPEN) { | 
 | 		zonefs_info(sb, | 
 | 			"No open and active zone limits. Ignoring explicit_open mount option\n"); | 
 | 		sbi->s_mount_opts &= ~ZONEFS_MNTOPT_EXPLICIT_OPEN; | 
 | 	} | 
 |  | 
 | 	/* Initialize the zone groups */ | 
 | 	ret = zonefs_init_zgroups(sb); | 
 | 	if (ret) | 
 | 		goto cleanup; | 
 |  | 
 | 	/* Create root directory inode */ | 
 | 	ret = -ENOMEM; | 
 | 	inode = new_inode(sb); | 
 | 	if (!inode) | 
 | 		goto cleanup; | 
 |  | 
 | 	inode->i_ino = bdev_nr_zones(sb->s_bdev); | 
 | 	inode->i_mode = S_IFDIR | 0555; | 
 | 	inode->i_ctime = inode->i_mtime = inode->i_atime = current_time(inode); | 
 | 	inode->i_op = &zonefs_dir_inode_operations; | 
 | 	inode->i_fop = &simple_dir_operations; | 
 | 	set_nlink(inode, 2); | 
 |  | 
 | 	sb->s_root = d_make_root(inode); | 
 | 	if (!sb->s_root) | 
 | 		goto cleanup; | 
 |  | 
 | 	/* Create and populate files in zone groups directories */ | 
 | 	for (t = 0; t < ZONEFS_ZTYPE_MAX; t++) { | 
 | 		ret = zonefs_create_zgroup_inodes(sb, t); | 
 | 		if (ret) | 
 | 			goto cleanup; | 
 | 	} | 
 |  | 
 | 	ret = zonefs_sysfs_register(sb); | 
 | 	if (ret) | 
 | 		goto cleanup; | 
 |  | 
 | 	return 0; | 
 |  | 
 | cleanup: | 
 | 	zonefs_free_zgroups(sb); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static struct dentry *zonefs_mount(struct file_system_type *fs_type, | 
 | 				   int flags, const char *dev_name, void *data) | 
 | { | 
 | 	return mount_bdev(fs_type, flags, dev_name, data, zonefs_fill_super); | 
 | } | 
 |  | 
 | static void zonefs_kill_super(struct super_block *sb) | 
 | { | 
 | 	struct zonefs_sb_info *sbi = ZONEFS_SB(sb); | 
 |  | 
 | 	if (sb->s_root) | 
 | 		d_genocide(sb->s_root); | 
 |  | 
 | 	zonefs_sysfs_unregister(sb); | 
 | 	zonefs_free_zgroups(sb); | 
 | 	kill_block_super(sb); | 
 | 	kfree(sbi); | 
 | } | 
 |  | 
 | /* | 
 |  * File system definition and registration. | 
 |  */ | 
 | static struct file_system_type zonefs_type = { | 
 | 	.owner		= THIS_MODULE, | 
 | 	.name		= "zonefs", | 
 | 	.mount		= zonefs_mount, | 
 | 	.kill_sb	= zonefs_kill_super, | 
 | 	.fs_flags	= FS_REQUIRES_DEV, | 
 | }; | 
 |  | 
 | static int __init zonefs_init_inodecache(void) | 
 | { | 
 | 	zonefs_inode_cachep = kmem_cache_create("zonefs_inode_cache", | 
 | 			sizeof(struct zonefs_inode_info), 0, | 
 | 			(SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD | SLAB_ACCOUNT), | 
 | 			NULL); | 
 | 	if (zonefs_inode_cachep == NULL) | 
 | 		return -ENOMEM; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void zonefs_destroy_inodecache(void) | 
 | { | 
 | 	/* | 
 | 	 * Make sure all delayed rcu free inodes are flushed before we | 
 | 	 * destroy the inode cache. | 
 | 	 */ | 
 | 	rcu_barrier(); | 
 | 	kmem_cache_destroy(zonefs_inode_cachep); | 
 | } | 
 |  | 
 | static int __init zonefs_init(void) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	BUILD_BUG_ON(sizeof(struct zonefs_super) != ZONEFS_SUPER_SIZE); | 
 |  | 
 | 	ret = zonefs_init_inodecache(); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	ret = zonefs_sysfs_init(); | 
 | 	if (ret) | 
 | 		goto destroy_inodecache; | 
 |  | 
 | 	ret = register_filesystem(&zonefs_type); | 
 | 	if (ret) | 
 | 		goto sysfs_exit; | 
 |  | 
 | 	return 0; | 
 |  | 
 | sysfs_exit: | 
 | 	zonefs_sysfs_exit(); | 
 | destroy_inodecache: | 
 | 	zonefs_destroy_inodecache(); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void __exit zonefs_exit(void) | 
 | { | 
 | 	unregister_filesystem(&zonefs_type); | 
 | 	zonefs_sysfs_exit(); | 
 | 	zonefs_destroy_inodecache(); | 
 | } | 
 |  | 
 | MODULE_AUTHOR("Damien Le Moal"); | 
 | MODULE_DESCRIPTION("Zone file system for zoned block devices"); | 
 | MODULE_LICENSE("GPL"); | 
 | MODULE_ALIAS_FS("zonefs"); | 
 | module_init(zonefs_init); | 
 | module_exit(zonefs_exit); |