|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /* | 
|  | * Copyright (C) 2020 BayLibre, SAS | 
|  | * Author: Neil Armstrong <narmstrong@baylibre.com> | 
|  | */ | 
|  |  | 
|  | #include <linux/delay.h> | 
|  | #include <linux/gpio/consumer.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/regulator/consumer.h> | 
|  |  | 
|  | #include <video/mipi_display.h> | 
|  |  | 
|  | #include <drm/drm_crtc.h> | 
|  | #include <drm/drm_device.h> | 
|  | #include <drm/drm_mipi_dsi.h> | 
|  | #include <drm/drm_modes.h> | 
|  | #include <drm/drm_panel.h> | 
|  |  | 
|  | struct tdo_tl070wsh30_panel { | 
|  | struct drm_panel base; | 
|  | struct mipi_dsi_device *link; | 
|  |  | 
|  | struct regulator *supply; | 
|  | struct gpio_desc *reset_gpio; | 
|  |  | 
|  | bool prepared; | 
|  | }; | 
|  |  | 
|  | static inline | 
|  | struct tdo_tl070wsh30_panel *to_tdo_tl070wsh30_panel(struct drm_panel *panel) | 
|  | { | 
|  | return container_of(panel, struct tdo_tl070wsh30_panel, base); | 
|  | } | 
|  |  | 
|  | static int tdo_tl070wsh30_panel_prepare(struct drm_panel *panel) | 
|  | { | 
|  | struct tdo_tl070wsh30_panel *tdo_tl070wsh30 = to_tdo_tl070wsh30_panel(panel); | 
|  | int err; | 
|  |  | 
|  | if (tdo_tl070wsh30->prepared) | 
|  | return 0; | 
|  |  | 
|  | err = regulator_enable(tdo_tl070wsh30->supply); | 
|  | if (err < 0) | 
|  | return err; | 
|  |  | 
|  | usleep_range(10000, 11000); | 
|  |  | 
|  | gpiod_set_value_cansleep(tdo_tl070wsh30->reset_gpio, 1); | 
|  |  | 
|  | usleep_range(10000, 11000); | 
|  |  | 
|  | gpiod_set_value_cansleep(tdo_tl070wsh30->reset_gpio, 0); | 
|  |  | 
|  | msleep(200); | 
|  |  | 
|  | err = mipi_dsi_dcs_exit_sleep_mode(tdo_tl070wsh30->link); | 
|  | if (err < 0) { | 
|  | dev_err(panel->dev, "failed to exit sleep mode: %d\n", err); | 
|  | regulator_disable(tdo_tl070wsh30->supply); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | msleep(200); | 
|  |  | 
|  | err = mipi_dsi_dcs_set_display_on(tdo_tl070wsh30->link); | 
|  | if (err < 0) { | 
|  | dev_err(panel->dev, "failed to set display on: %d\n", err); | 
|  | regulator_disable(tdo_tl070wsh30->supply); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | msleep(20); | 
|  |  | 
|  | tdo_tl070wsh30->prepared = true; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int tdo_tl070wsh30_panel_unprepare(struct drm_panel *panel) | 
|  | { | 
|  | struct tdo_tl070wsh30_panel *tdo_tl070wsh30 = to_tdo_tl070wsh30_panel(panel); | 
|  | int err; | 
|  |  | 
|  | if (!tdo_tl070wsh30->prepared) | 
|  | return 0; | 
|  |  | 
|  | err = mipi_dsi_dcs_set_display_off(tdo_tl070wsh30->link); | 
|  | if (err < 0) | 
|  | dev_err(panel->dev, "failed to set display off: %d\n", err); | 
|  |  | 
|  | usleep_range(10000, 11000); | 
|  |  | 
|  | err = mipi_dsi_dcs_enter_sleep_mode(tdo_tl070wsh30->link); | 
|  | if (err < 0) { | 
|  | dev_err(panel->dev, "failed to enter sleep mode: %d\n", err); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | usleep_range(10000, 11000); | 
|  |  | 
|  | regulator_disable(tdo_tl070wsh30->supply); | 
|  |  | 
|  | tdo_tl070wsh30->prepared = false; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct drm_display_mode default_mode = { | 
|  | .clock = 47250, | 
|  | .hdisplay = 1024, | 
|  | .hsync_start = 1024 + 46, | 
|  | .hsync_end = 1024 + 46 + 80, | 
|  | .htotal = 1024 + 46 + 80 + 100, | 
|  | .vdisplay = 600, | 
|  | .vsync_start = 600 + 5, | 
|  | .vsync_end = 600 + 5 + 5, | 
|  | .vtotal = 600 + 5 + 5 + 20, | 
|  | .flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC, | 
|  | }; | 
|  |  | 
|  | static int tdo_tl070wsh30_panel_get_modes(struct drm_panel *panel, | 
|  | struct drm_connector *connector) | 
|  | { | 
|  | struct drm_display_mode *mode; | 
|  |  | 
|  | mode = drm_mode_duplicate(connector->dev, &default_mode); | 
|  | if (!mode) { | 
|  | dev_err(panel->dev, "failed to add mode %ux%u@%u\n", | 
|  | default_mode.hdisplay, default_mode.vdisplay, | 
|  | drm_mode_vrefresh(&default_mode)); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | drm_mode_set_name(mode); | 
|  |  | 
|  | drm_mode_probed_add(connector, mode); | 
|  |  | 
|  | connector->display_info.width_mm = 154; | 
|  | connector->display_info.height_mm = 85; | 
|  | connector->display_info.bpc = 8; | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static const struct drm_panel_funcs tdo_tl070wsh30_panel_funcs = { | 
|  | .unprepare = tdo_tl070wsh30_panel_unprepare, | 
|  | .prepare = tdo_tl070wsh30_panel_prepare, | 
|  | .get_modes = tdo_tl070wsh30_panel_get_modes, | 
|  | }; | 
|  |  | 
|  | static const struct of_device_id tdo_tl070wsh30_of_match[] = { | 
|  | { .compatible = "tdo,tl070wsh30", }, | 
|  | { /* sentinel */ } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, tdo_tl070wsh30_of_match); | 
|  |  | 
|  | static int tdo_tl070wsh30_panel_add(struct tdo_tl070wsh30_panel *tdo_tl070wsh30) | 
|  | { | 
|  | struct device *dev = &tdo_tl070wsh30->link->dev; | 
|  | int err; | 
|  |  | 
|  | tdo_tl070wsh30->supply = devm_regulator_get(dev, "power"); | 
|  | if (IS_ERR(tdo_tl070wsh30->supply)) | 
|  | return PTR_ERR(tdo_tl070wsh30->supply); | 
|  |  | 
|  | tdo_tl070wsh30->reset_gpio = devm_gpiod_get(dev, "reset", | 
|  | GPIOD_OUT_LOW); | 
|  | if (IS_ERR(tdo_tl070wsh30->reset_gpio)) { | 
|  | err = PTR_ERR(tdo_tl070wsh30->reset_gpio); | 
|  | dev_dbg(dev, "failed to get reset gpio: %d\n", err); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | drm_panel_init(&tdo_tl070wsh30->base, &tdo_tl070wsh30->link->dev, | 
|  | &tdo_tl070wsh30_panel_funcs, DRM_MODE_CONNECTOR_DSI); | 
|  |  | 
|  | err = drm_panel_of_backlight(&tdo_tl070wsh30->base); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | drm_panel_add(&tdo_tl070wsh30->base); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int tdo_tl070wsh30_panel_probe(struct mipi_dsi_device *dsi) | 
|  | { | 
|  | struct tdo_tl070wsh30_panel *tdo_tl070wsh30; | 
|  | int err; | 
|  |  | 
|  | dsi->lanes = 4; | 
|  | dsi->format = MIPI_DSI_FMT_RGB888; | 
|  | dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST | MIPI_DSI_MODE_LPM; | 
|  |  | 
|  | tdo_tl070wsh30 = devm_kzalloc(&dsi->dev, sizeof(*tdo_tl070wsh30), | 
|  | GFP_KERNEL); | 
|  | if (!tdo_tl070wsh30) | 
|  | return -ENOMEM; | 
|  |  | 
|  | mipi_dsi_set_drvdata(dsi, tdo_tl070wsh30); | 
|  | tdo_tl070wsh30->link = dsi; | 
|  |  | 
|  | err = tdo_tl070wsh30_panel_add(tdo_tl070wsh30); | 
|  | if (err < 0) | 
|  | return err; | 
|  |  | 
|  | return mipi_dsi_attach(dsi); | 
|  | } | 
|  |  | 
|  | static int tdo_tl070wsh30_panel_remove(struct mipi_dsi_device *dsi) | 
|  | { | 
|  | struct tdo_tl070wsh30_panel *tdo_tl070wsh30 = mipi_dsi_get_drvdata(dsi); | 
|  | int err; | 
|  |  | 
|  | err = mipi_dsi_detach(dsi); | 
|  | if (err < 0) | 
|  | dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", err); | 
|  |  | 
|  | drm_panel_remove(&tdo_tl070wsh30->base); | 
|  | drm_panel_disable(&tdo_tl070wsh30->base); | 
|  | drm_panel_unprepare(&tdo_tl070wsh30->base); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void tdo_tl070wsh30_panel_shutdown(struct mipi_dsi_device *dsi) | 
|  | { | 
|  | struct tdo_tl070wsh30_panel *tdo_tl070wsh30 = mipi_dsi_get_drvdata(dsi); | 
|  |  | 
|  | drm_panel_disable(&tdo_tl070wsh30->base); | 
|  | drm_panel_unprepare(&tdo_tl070wsh30->base); | 
|  | } | 
|  |  | 
|  | static struct mipi_dsi_driver tdo_tl070wsh30_panel_driver = { | 
|  | .driver = { | 
|  | .name = "panel-tdo-tl070wsh30", | 
|  | .of_match_table = tdo_tl070wsh30_of_match, | 
|  | }, | 
|  | .probe = tdo_tl070wsh30_panel_probe, | 
|  | .remove = tdo_tl070wsh30_panel_remove, | 
|  | .shutdown = tdo_tl070wsh30_panel_shutdown, | 
|  | }; | 
|  | module_mipi_dsi_driver(tdo_tl070wsh30_panel_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>"); | 
|  | MODULE_DESCRIPTION("TDO TL070WSH30 panel driver"); | 
|  | MODULE_LICENSE("GPL v2"); |