blob: 5b8799c69f684936a96034665c38b2aef84a6408 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
* Author: Rob Clark <rob@ti.com>
*/
#include <drm/drm_atomic_helper.h>
#include <drm/drm_crtc.h>
#include <drm/drm_panel.h>
#include <drm/drm_probe_helper.h>
#include "omap_drv.h"
/*
* connector funcs
*/
#define to_omap_connector(x) container_of(x, struct omap_connector, base)
struct omap_connector {
struct drm_connector base;
struct omap_dss_device *output;
struct omap_dss_device *hpd;
bool hdmi_mode;
};
static void omap_connector_hpd_notify(struct drm_connector *connector,
enum drm_connector_status status)
{
struct omap_connector *omap_connector = to_omap_connector(connector);
struct omap_dss_device *dssdev;
if (status != connector_status_disconnected)
return;
/*
* Notify all devics in the pipeline of disconnection. This is required
* to let the HDMI encoders reset their internal state related to
* connection status, such as the CEC address.
*/
for (dssdev = omap_connector->output; dssdev; dssdev = dssdev->next) {
if (dssdev->ops && dssdev->ops->hdmi.lost_hotplug)
dssdev->ops->hdmi.lost_hotplug(dssdev);
}
}
static void omap_connector_hpd_cb(void *cb_data,
enum drm_connector_status status)
{
struct omap_connector *omap_connector = cb_data;
struct drm_connector *connector = &omap_connector->base;
struct drm_device *dev = connector->dev;
enum drm_connector_status old_status;
mutex_lock(&dev->mode_config.mutex);
old_status = connector->status;
connector->status = status;
mutex_unlock(&dev->mode_config.mutex);
if (old_status == status)
return;
omap_connector_hpd_notify(connector, status);
drm_kms_helper_hotplug_event(dev);
}
void omap_connector_enable_hpd(struct drm_connector *connector)
{
struct omap_connector *omap_connector = to_omap_connector(connector);
struct omap_dss_device *hpd = omap_connector->hpd;
if (hpd)
hpd->ops->register_hpd_cb(hpd, omap_connector_hpd_cb,
omap_connector);
}
void omap_connector_disable_hpd(struct drm_connector *connector)
{
struct omap_connector *omap_connector = to_omap_connector(connector);
struct omap_dss_device *hpd = omap_connector->hpd;
if (hpd)
hpd->ops->unregister_hpd_cb(hpd);
}
bool omap_connector_get_hdmi_mode(struct drm_connector *connector)
{
struct omap_connector *omap_connector = to_omap_connector(connector);
return omap_connector->hdmi_mode;
}
static struct omap_dss_device *
omap_connector_find_device(struct drm_connector *connector,
enum omap_dss_device_ops_flag op)
{
struct omap_connector *omap_connector = to_omap_connector(connector);
struct omap_dss_device *dssdev = NULL;
struct omap_dss_device *d;
for (d = omap_connector->output; d; d = d->next) {
if (d->ops_flags & op)
dssdev = d;
}
return dssdev;
}
static enum drm_connector_status omap_connector_detect(
struct drm_connector *connector, bool force)
{
struct omap_dss_device *dssdev;
enum drm_connector_status status;
dssdev = omap_connector_find_device(connector,
OMAP_DSS_DEVICE_OP_DETECT);
if (dssdev) {
status = dssdev->ops->detect(dssdev)
? connector_status_connected
: connector_status_disconnected;
omap_connector_hpd_notify(connector, status);
} else {
switch (connector->connector_type) {
case DRM_MODE_CONNECTOR_DPI:
case DRM_MODE_CONNECTOR_LVDS:
case DRM_MODE_CONNECTOR_DSI:
status = connector_status_connected;
break;
default:
status = connector_status_unknown;
break;
}
}
VERB("%s: %d (force=%d)", connector->name, status, force);
return status;
}
static void omap_connector_destroy(struct drm_connector *connector)
{
struct omap_connector *omap_connector = to_omap_connector(connector);
DBG("%s", connector->name);
if (omap_connector->hpd) {
struct omap_dss_device *hpd = omap_connector->hpd;
hpd->ops->unregister_hpd_cb(hpd);
omapdss_device_put(hpd);
omap_connector->hpd = NULL;
}
drm_connector_unregister(connector);
drm_connector_cleanup(connector);
omapdss_device_put(omap_connector->output);
kfree(omap_connector);
}
#define MAX_EDID 512
static int omap_connector_get_modes_edid(struct drm_connector *connector,
struct omap_dss_device *dssdev)
{
struct omap_connector *omap_connector = to_omap_connector(connector);
enum drm_connector_status status;
void *edid;
int n;
status = omap_connector_detect(connector, false);
if (status != connector_status_connected)
goto no_edid;
edid = kzalloc(MAX_EDID, GFP_KERNEL);
if (!edid)
goto no_edid;
if (dssdev->ops->read_edid(dssdev, edid, MAX_EDID) <= 0 ||
!drm_edid_is_valid(edid)) {
kfree(edid);
goto no_edid;
}
drm_connector_update_edid_property(connector, edid);
n = drm_add_edid_modes(connector, edid);
omap_connector->hdmi_mode = drm_detect_hdmi_monitor(edid);
kfree(edid);
return n;
no_edid:
drm_connector_update_edid_property(connector, NULL);
return 0;
}
static int omap_connector_get_modes(struct drm_connector *connector)
{
struct omap_connector *omap_connector = to_omap_connector(connector);
struct omap_dss_device *dssdev;
DBG("%s", connector->name);
/*
* If display exposes EDID, then we parse that in the normal way to
* build table of supported modes.
*/
dssdev = omap_connector_find_device(connector,
OMAP_DSS_DEVICE_OP_EDID);
if (dssdev)
return omap_connector_get_modes_edid(connector, dssdev);
/*
* Otherwise if the display pipeline reports modes (e.g. with a fixed
* resolution panel or an analog TV output), query it.
*/
dssdev = omap_connector_find_device(connector,
OMAP_DSS_DEVICE_OP_MODES);
if (dssdev)
return dssdev->ops->get_modes(dssdev, connector);
/*
* Otherwise if the display pipeline uses a drm_panel, we delegate the
* operation to the panel API.
*/
if (omap_connector->output->panel)
return drm_panel_get_modes(omap_connector->output->panel);
/*
* We can't retrieve modes, which can happen for instance for a DVI or
* VGA output with the DDC bus unconnected. The KMS core will add the
* default modes.
*/
return 0;
}
enum drm_mode_status omap_connector_mode_fixup(struct omap_dss_device *dssdev,
const struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
int ret;
drm_mode_copy(adjusted_mode, mode);
for (; dssdev; dssdev = dssdev->next) {
if (!dssdev->ops->check_timings)
continue;
ret = dssdev->ops->check_timings(dssdev, adjusted_mode);
if (ret)
return MODE_BAD;
}
return MODE_OK;
}
static enum drm_mode_status omap_connector_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
struct omap_connector *omap_connector = to_omap_connector(connector);
struct drm_display_mode new_mode = { { 0 } };
enum drm_mode_status status;
status = omap_connector_mode_fixup(omap_connector->output, mode,
&new_mode);
if (status != MODE_OK)
goto done;
/* Check if vrefresh is still valid. */
if (drm_mode_vrefresh(mode) != drm_mode_vrefresh(&new_mode))
status = MODE_NOCLOCK;
done:
DBG("connector: mode %s: " DRM_MODE_FMT,
(status == MODE_OK) ? "valid" : "invalid",
DRM_MODE_ARG(mode));
return status;
}
static const struct drm_connector_funcs omap_connector_funcs = {
.reset = drm_atomic_helper_connector_reset,
.detect = omap_connector_detect,
.fill_modes = drm_helper_probe_single_connector_modes,
.destroy = omap_connector_destroy,
.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
};
static const struct drm_connector_helper_funcs omap_connector_helper_funcs = {
.get_modes = omap_connector_get_modes,
.mode_valid = omap_connector_mode_valid,
};
static int omap_connector_get_type(struct omap_dss_device *output)
{
struct omap_dss_device *display;
enum omap_display_type type;
display = omapdss_display_get(output);
type = display->type;
omapdss_device_put(display);
switch (type) {
case OMAP_DISPLAY_TYPE_HDMI:
return DRM_MODE_CONNECTOR_HDMIA;
case OMAP_DISPLAY_TYPE_DVI:
return DRM_MODE_CONNECTOR_DVID;
case OMAP_DISPLAY_TYPE_DSI:
return DRM_MODE_CONNECTOR_DSI;
case OMAP_DISPLAY_TYPE_DPI:
case OMAP_DISPLAY_TYPE_DBI:
return DRM_MODE_CONNECTOR_DPI;
case OMAP_DISPLAY_TYPE_VENC:
/* TODO: This could also be composite */
return DRM_MODE_CONNECTOR_SVIDEO;
case OMAP_DISPLAY_TYPE_SDI:
return DRM_MODE_CONNECTOR_LVDS;
default:
return DRM_MODE_CONNECTOR_Unknown;
}
}
/* initialize connector */
struct drm_connector *omap_connector_init(struct drm_device *dev,
struct omap_dss_device *output,
struct drm_encoder *encoder)
{
struct drm_connector *connector = NULL;
struct omap_connector *omap_connector;
struct omap_dss_device *dssdev;
DBG("%s", output->name);
omap_connector = kzalloc(sizeof(*omap_connector), GFP_KERNEL);
if (!omap_connector)
goto fail;
omap_connector->output = omapdss_device_get(output);
connector = &omap_connector->base;
connector->interlace_allowed = 1;
connector->doublescan_allowed = 0;
drm_connector_init(dev, connector, &omap_connector_funcs,
omap_connector_get_type(output));
drm_connector_helper_add(connector, &omap_connector_helper_funcs);
/*
* Initialize connector status handling. First try to find a device that
* supports hot-plug reporting. If it fails, fall back to a device that
* support polling. If that fails too, we don't support hot-plug
* detection at all.
*/
dssdev = omap_connector_find_device(connector, OMAP_DSS_DEVICE_OP_HPD);
if (dssdev) {
omap_connector->hpd = omapdss_device_get(dssdev);
connector->polled = DRM_CONNECTOR_POLL_HPD;
} else {
dssdev = omap_connector_find_device(connector,
OMAP_DSS_DEVICE_OP_DETECT);
if (dssdev)
connector->polled = DRM_CONNECTOR_POLL_CONNECT |
DRM_CONNECTOR_POLL_DISCONNECT;
}
return connector;
fail:
if (connector)
omap_connector_destroy(connector);
return NULL;
}