|  | // SPDX-License-Identifier: GPL-2.0-or-later | 
|  | /* | 
|  | * mpc7448_hpc2.c | 
|  | * | 
|  | * Board setup routines for the Freescale mpc7448hpc2(taiga) platform | 
|  | * | 
|  | * Author: Jacob Pan | 
|  | *	 jacob.pan@freescale.com | 
|  | * Author: Xianghua Xiao | 
|  | *       x.xiao@freescale.com | 
|  | * Maintainer: Roy Zang <tie-fei.zang@freescale.com> | 
|  | * 	Add Flat Device Tree support fot mpc7448hpc2 board | 
|  | * | 
|  | * Copyright 2004-2006 Freescale Semiconductor, Inc. | 
|  | */ | 
|  |  | 
|  | #include <linux/stddef.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/kdev_t.h> | 
|  | #include <linux/console.h> | 
|  | #include <linux/extable.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/irq.h> | 
|  | #include <linux/seq_file.h> | 
|  | #include <linux/root_dev.h> | 
|  | #include <linux/serial.h> | 
|  | #include <linux/tty.h> | 
|  | #include <linux/serial_core.h> | 
|  |  | 
|  | #include <asm/time.h> | 
|  | #include <asm/machdep.h> | 
|  | #include <asm/prom.h> | 
|  | #include <asm/udbg.h> | 
|  | #include <asm/tsi108.h> | 
|  | #include <asm/pci-bridge.h> | 
|  | #include <asm/reg.h> | 
|  | #include <mm/mmu_decl.h> | 
|  | #include <asm/tsi108_pci.h> | 
|  | #include <asm/tsi108_irq.h> | 
|  | #include <asm/mpic.h> | 
|  |  | 
|  | #undef DEBUG | 
|  | #ifdef DEBUG | 
|  | #define DBG(fmt...) do { printk(fmt); } while(0) | 
|  | #else | 
|  | #define DBG(fmt...) do { } while(0) | 
|  | #endif | 
|  |  | 
|  | #define MPC7448HPC2_PCI_CFG_PHYS 0xfb000000 | 
|  |  | 
|  | int mpc7448_hpc2_exclude_device(struct pci_controller *hose, | 
|  | u_char bus, u_char devfn) | 
|  | { | 
|  | if (bus == 0 && PCI_SLOT(devfn) == 0) | 
|  | return PCIBIOS_DEVICE_NOT_FOUND; | 
|  | else | 
|  | return PCIBIOS_SUCCESSFUL; | 
|  | } | 
|  |  | 
|  | static void __init mpc7448_hpc2_setup_arch(void) | 
|  | { | 
|  | struct device_node *np; | 
|  | if (ppc_md.progress) | 
|  | ppc_md.progress("mpc7448_hpc2_setup_arch():set_bridge", 0); | 
|  |  | 
|  | tsi108_csr_vir_base = get_vir_csrbase(); | 
|  |  | 
|  | /* setup PCI host bridge */ | 
|  | #ifdef CONFIG_PCI | 
|  | for_each_compatible_node(np, "pci", "tsi108-pci") | 
|  | tsi108_setup_pci(np, MPC7448HPC2_PCI_CFG_PHYS, 0); | 
|  |  | 
|  | ppc_md.pci_exclude_device = mpc7448_hpc2_exclude_device; | 
|  | if (ppc_md.progress) | 
|  | ppc_md.progress("tsi108: resources set", 0x100); | 
|  | #endif | 
|  |  | 
|  | printk(KERN_INFO "MPC7448HPC2 (TAIGA) Platform\n"); | 
|  | printk(KERN_INFO | 
|  | "Jointly ported by Freescale and Tundra Semiconductor\n"); | 
|  | printk(KERN_INFO | 
|  | "Enabling L2 cache then enabling the HID0 prefetch engine.\n"); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Interrupt setup and service.  Interrupts on the mpc7448_hpc2 come | 
|  | * from the four external INT pins, PCI interrupts are routed via | 
|  | * PCI interrupt control registers, it generates internal IRQ23 | 
|  | * | 
|  | * Interrupt routing on the Taiga Board: | 
|  | * TSI108:PB_INT[0] -> CPU0:INT# | 
|  | * TSI108:PB_INT[1] -> CPU0:MCP# | 
|  | * TSI108:PB_INT[2] -> N/C | 
|  | * TSI108:PB_INT[3] -> N/C | 
|  | */ | 
|  | static void __init mpc7448_hpc2_init_IRQ(void) | 
|  | { | 
|  | struct mpic *mpic; | 
|  | #ifdef CONFIG_PCI | 
|  | unsigned int cascade_pci_irq; | 
|  | struct device_node *tsi_pci; | 
|  | struct device_node *cascade_node = NULL; | 
|  | #endif | 
|  |  | 
|  | mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | | 
|  | MPIC_SPV_EOI | MPIC_NO_PTHROU_DIS | MPIC_REGSET_TSI108, | 
|  | 24, 0, | 
|  | "Tsi108_PIC"); | 
|  |  | 
|  | BUG_ON(mpic == NULL); | 
|  |  | 
|  | mpic_assign_isu(mpic, 0, mpic->paddr + 0x100); | 
|  |  | 
|  | mpic_init(mpic); | 
|  |  | 
|  | #ifdef CONFIG_PCI | 
|  | tsi_pci = of_find_node_by_type(NULL, "pci"); | 
|  | if (tsi_pci == NULL) { | 
|  | printk("%s: No tsi108 pci node found !\n", __func__); | 
|  | return; | 
|  | } | 
|  | cascade_node = of_find_node_by_type(NULL, "pic-router"); | 
|  | if (cascade_node == NULL) { | 
|  | printk("%s: No tsi108 pci cascade node found !\n", __func__); | 
|  | return; | 
|  | } | 
|  |  | 
|  | cascade_pci_irq = irq_of_parse_and_map(tsi_pci, 0); | 
|  | DBG("%s: tsi108 cascade_pci_irq = 0x%x\n", __func__, | 
|  | (u32) cascade_pci_irq); | 
|  | tsi108_pci_int_init(cascade_node); | 
|  | irq_set_handler_data(cascade_pci_irq, mpic); | 
|  | irq_set_chained_handler(cascade_pci_irq, tsi108_irq_cascade); | 
|  | #endif | 
|  | /* Configure MPIC outputs to CPU0 */ | 
|  | tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0); | 
|  | } | 
|  |  | 
|  | void mpc7448_hpc2_show_cpuinfo(struct seq_file *m) | 
|  | { | 
|  | seq_printf(m, "vendor\t\t: Freescale Semiconductor\n"); | 
|  | } | 
|  |  | 
|  | static void __noreturn mpc7448_hpc2_restart(char *cmd) | 
|  | { | 
|  | local_irq_disable(); | 
|  |  | 
|  | /* Set exception prefix high - to the firmware */ | 
|  | _nmask_and_or_msr(0, MSR_IP); | 
|  |  | 
|  | for (;;) ;		/* Spin until reset happens */ | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Called very early, device-tree isn't unflattened | 
|  | */ | 
|  | static int __init mpc7448_hpc2_probe(void) | 
|  | { | 
|  | if (!of_machine_is_compatible("mpc74xx")) | 
|  | return 0; | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static int mpc7448_machine_check_exception(struct pt_regs *regs) | 
|  | { | 
|  | const struct exception_table_entry *entry; | 
|  |  | 
|  | /* Are we prepared to handle this fault */ | 
|  | if ((entry = search_exception_tables(regs->nip)) != NULL) { | 
|  | tsi108_clear_pci_cfg_error(); | 
|  | regs->msr |= MSR_RI; | 
|  | regs->nip = extable_fixup(entry); | 
|  | return 1; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | define_machine(mpc7448_hpc2){ | 
|  | .name 			= "MPC7448 HPC2", | 
|  | .probe 			= mpc7448_hpc2_probe, | 
|  | .setup_arch 		= mpc7448_hpc2_setup_arch, | 
|  | .init_IRQ 		= mpc7448_hpc2_init_IRQ, | 
|  | .show_cpuinfo 		= mpc7448_hpc2_show_cpuinfo, | 
|  | .get_irq 		= mpic_get_irq, | 
|  | .restart 		= mpc7448_hpc2_restart, | 
|  | .calibrate_decr 	= generic_calibrate_decr, | 
|  | .machine_check_exception= mpc7448_machine_check_exception, | 
|  | .progress 		= udbg_progress, | 
|  | }; |