| // SPDX-License-Identifier: GPL-2.0 | 
 | /* | 
 |  *	character device driver for reading z/VM system service records | 
 |  * | 
 |  * | 
 |  *	Copyright IBM Corp. 2004, 2009 | 
 |  *	character device driver for reading z/VM system service records, | 
 |  *	Version 1.0 | 
 |  *	Author(s): Xenia Tkatschow <xenia@us.ibm.com> | 
 |  *		   Stefan Weinhuber <wein@de.ibm.com> | 
 |  * | 
 |  */ | 
 |  | 
 | #define KMSG_COMPONENT "vmlogrdr" | 
 | #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/init.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/errno.h> | 
 | #include <linux/types.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/spinlock.h> | 
 | #include <linux/atomic.h> | 
 | #include <linux/uaccess.h> | 
 | #include <asm/cpcmd.h> | 
 | #include <asm/debug.h> | 
 | #include <asm/ebcdic.h> | 
 | #include <net/iucv/iucv.h> | 
 | #include <linux/kmod.h> | 
 | #include <linux/cdev.h> | 
 | #include <linux/device.h> | 
 | #include <linux/string.h> | 
 |  | 
 | MODULE_AUTHOR | 
 | 	("(C) 2004 IBM Corporation by Xenia Tkatschow (xenia@us.ibm.com)\n" | 
 | 	 "                            Stefan Weinhuber (wein@de.ibm.com)"); | 
 | MODULE_DESCRIPTION ("Character device driver for reading z/VM " | 
 | 		    "system service records."); | 
 | MODULE_LICENSE("GPL"); | 
 |  | 
 |  | 
 | /* | 
 |  * The size of the buffer for iucv data transfer is one page, | 
 |  * but in addition to the data we read from iucv we also | 
 |  * place an integer and some characters into that buffer, | 
 |  * so the maximum size for record data is a little less then | 
 |  * one page. | 
 |  */ | 
 | #define NET_BUFFER_SIZE	(PAGE_SIZE - sizeof(int) - sizeof(FENCE)) | 
 |  | 
 | /* | 
 |  * The elements that are concurrently accessed by bottom halves are | 
 |  * connection_established, iucv_path_severed, local_interrupt_buffer | 
 |  * and receive_ready. The first three can be protected by | 
 |  * priv_lock.  receive_ready is atomic, so it can be incremented and | 
 |  * decremented without holding a lock. | 
 |  * The variable dev_in_use needs to be protected by the lock, since | 
 |  * it's a flag used by open to make sure that the device is opened only | 
 |  * by one user at the same time. | 
 |  */ | 
 | struct vmlogrdr_priv_t { | 
 | 	char system_service[8]; | 
 | 	char internal_name[8]; | 
 | 	char recording_name[8]; | 
 | 	struct iucv_path *path; | 
 | 	int connection_established; | 
 | 	int iucv_path_severed; | 
 | 	struct iucv_message local_interrupt_buffer; | 
 | 	atomic_t receive_ready; | 
 | 	int minor_num; | 
 | 	char * buffer; | 
 | 	char * current_position; | 
 | 	int remaining; | 
 | 	ulong residual_length; | 
 | 	int buffer_free; | 
 | 	int dev_in_use; /* 1: already opened, 0: not opened*/ | 
 | 	spinlock_t priv_lock; | 
 | 	struct device  *device; | 
 | 	struct device  *class_device; | 
 | 	int autorecording; | 
 | 	int autopurge; | 
 | }; | 
 |  | 
 |  | 
 | /* | 
 |  * File operation structure for vmlogrdr devices | 
 |  */ | 
 | static int vmlogrdr_open(struct inode *, struct file *); | 
 | static int vmlogrdr_release(struct inode *, struct file *); | 
 | static ssize_t vmlogrdr_read (struct file *filp, char __user *data, | 
 | 			      size_t count, loff_t * ppos); | 
 |  | 
 | static const struct file_operations vmlogrdr_fops = { | 
 | 	.owner   = THIS_MODULE, | 
 | 	.open    = vmlogrdr_open, | 
 | 	.release = vmlogrdr_release, | 
 | 	.read    = vmlogrdr_read, | 
 | 	.llseek  = no_llseek, | 
 | }; | 
 |  | 
 |  | 
 | static void vmlogrdr_iucv_path_complete(struct iucv_path *, u8 *ipuser); | 
 | static void vmlogrdr_iucv_path_severed(struct iucv_path *, u8 *ipuser); | 
 | static void vmlogrdr_iucv_message_pending(struct iucv_path *, | 
 | 					  struct iucv_message *); | 
 |  | 
 |  | 
 | static struct iucv_handler vmlogrdr_iucv_handler = { | 
 | 	.path_complete	 = vmlogrdr_iucv_path_complete, | 
 | 	.path_severed	 = vmlogrdr_iucv_path_severed, | 
 | 	.message_pending = vmlogrdr_iucv_message_pending, | 
 | }; | 
 |  | 
 |  | 
 | static DECLARE_WAIT_QUEUE_HEAD(conn_wait_queue); | 
 | static DECLARE_WAIT_QUEUE_HEAD(read_wait_queue); | 
 |  | 
 | /* | 
 |  * pointer to system service private structure | 
 |  * minor number 0 --> logrec | 
 |  * minor number 1 --> account | 
 |  * minor number 2 --> symptom | 
 |  */ | 
 |  | 
 | static struct vmlogrdr_priv_t sys_ser[] = { | 
 | 	{ .system_service = "*LOGREC ", | 
 | 	  .internal_name  = "logrec", | 
 | 	  .recording_name = "EREP", | 
 | 	  .minor_num      = 0, | 
 | 	  .buffer_free    = 1, | 
 | 	  .priv_lock	  = __SPIN_LOCK_UNLOCKED(sys_ser[0].priv_lock), | 
 | 	  .autorecording  = 1, | 
 | 	  .autopurge      = 1, | 
 | 	}, | 
 | 	{ .system_service = "*ACCOUNT", | 
 | 	  .internal_name  = "account", | 
 | 	  .recording_name = "ACCOUNT", | 
 | 	  .minor_num      = 1, | 
 | 	  .buffer_free    = 1, | 
 | 	  .priv_lock	  = __SPIN_LOCK_UNLOCKED(sys_ser[1].priv_lock), | 
 | 	  .autorecording  = 1, | 
 | 	  .autopurge      = 1, | 
 | 	}, | 
 | 	{ .system_service = "*SYMPTOM", | 
 | 	  .internal_name  = "symptom", | 
 | 	  .recording_name = "SYMPTOM", | 
 | 	  .minor_num      = 2, | 
 | 	  .buffer_free    = 1, | 
 | 	  .priv_lock	  = __SPIN_LOCK_UNLOCKED(sys_ser[2].priv_lock), | 
 | 	  .autorecording  = 1, | 
 | 	  .autopurge      = 1, | 
 | 	} | 
 | }; | 
 |  | 
 | #define MAXMINOR  ARRAY_SIZE(sys_ser) | 
 |  | 
 | static char FENCE[] = {"EOR"}; | 
 | static int vmlogrdr_major = 0; | 
 | static struct cdev  *vmlogrdr_cdev = NULL; | 
 | static int recording_class_AB; | 
 |  | 
 |  | 
 | static void vmlogrdr_iucv_path_complete(struct iucv_path *path, u8 *ipuser) | 
 | { | 
 | 	struct vmlogrdr_priv_t * logptr = path->private; | 
 |  | 
 | 	spin_lock(&logptr->priv_lock); | 
 | 	logptr->connection_established = 1; | 
 | 	spin_unlock(&logptr->priv_lock); | 
 | 	wake_up(&conn_wait_queue); | 
 | } | 
 |  | 
 |  | 
 | static void vmlogrdr_iucv_path_severed(struct iucv_path *path, u8 *ipuser) | 
 | { | 
 | 	struct vmlogrdr_priv_t * logptr = path->private; | 
 | 	u8 reason = (u8) ipuser[8]; | 
 |  | 
 | 	pr_err("vmlogrdr: connection severed with reason %i\n", reason); | 
 |  | 
 | 	iucv_path_sever(path, NULL); | 
 | 	kfree(path); | 
 | 	logptr->path = NULL; | 
 |  | 
 | 	spin_lock(&logptr->priv_lock); | 
 | 	logptr->connection_established = 0; | 
 | 	logptr->iucv_path_severed = 1; | 
 | 	spin_unlock(&logptr->priv_lock); | 
 |  | 
 | 	wake_up(&conn_wait_queue); | 
 | 	/* just in case we're sleeping waiting for a record */ | 
 | 	wake_up_interruptible(&read_wait_queue); | 
 | } | 
 |  | 
 |  | 
 | static void vmlogrdr_iucv_message_pending(struct iucv_path *path, | 
 | 					  struct iucv_message *msg) | 
 | { | 
 | 	struct vmlogrdr_priv_t * logptr = path->private; | 
 |  | 
 | 	/* | 
 | 	 * This function is the bottom half so it should be quick. | 
 | 	 * Copy the external interrupt data into our local eib and increment | 
 | 	 * the usage count | 
 | 	 */ | 
 | 	spin_lock(&logptr->priv_lock); | 
 | 	memcpy(&logptr->local_interrupt_buffer, msg, sizeof(*msg)); | 
 | 	atomic_inc(&logptr->receive_ready); | 
 | 	spin_unlock(&logptr->priv_lock); | 
 | 	wake_up_interruptible(&read_wait_queue); | 
 | } | 
 |  | 
 |  | 
 | static int vmlogrdr_get_recording_class_AB(void) | 
 | { | 
 | 	static const char cp_command[] = "QUERY COMMAND RECORDING "; | 
 | 	char cp_response[80]; | 
 | 	char *tail; | 
 | 	int len,i; | 
 |  | 
 | 	cpcmd(cp_command, cp_response, sizeof(cp_response), NULL); | 
 | 	len = strnlen(cp_response,sizeof(cp_response)); | 
 | 	// now the parsing | 
 | 	tail=strnchr(cp_response,len,'='); | 
 | 	if (!tail) | 
 | 		return 0; | 
 | 	tail++; | 
 | 	if (!strncmp("ANY",tail,3)) | 
 | 		return 1; | 
 | 	if (!strncmp("NONE",tail,4)) | 
 | 		return 0; | 
 | 	/* | 
 | 	 * expect comma separated list of classes here, if one of them | 
 | 	 * is A or B return 1 otherwise 0 | 
 | 	 */ | 
 |         for (i=tail-cp_response; i<len; i++) | 
 | 		if ( cp_response[i]=='A' || cp_response[i]=='B' ) | 
 | 			return 1; | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | static int vmlogrdr_recording(struct vmlogrdr_priv_t * logptr, | 
 | 			      int action, int purge) | 
 | { | 
 |  | 
 | 	char cp_command[80]; | 
 | 	char cp_response[160]; | 
 | 	char *onoff, *qid_string; | 
 | 	int rc; | 
 |  | 
 | 	onoff = ((action == 1) ? "ON" : "OFF"); | 
 | 	qid_string = ((recording_class_AB == 1) ? " QID * " : ""); | 
 |  | 
 | 	/* | 
 | 	 * The recording commands needs to be called with option QID | 
 | 	 * for guests that have previlege classes A or B. | 
 | 	 * Purging has to be done as separate step, because recording | 
 | 	 * can't be switched on as long as records are on the queue. | 
 | 	 * Doing both at the same time doesn't work. | 
 | 	 */ | 
 | 	if (purge && (action == 1)) { | 
 | 		memset(cp_command, 0x00, sizeof(cp_command)); | 
 | 		memset(cp_response, 0x00, sizeof(cp_response)); | 
 | 		snprintf(cp_command, sizeof(cp_command), | 
 | 			 "RECORDING %s PURGE %s", | 
 | 			 logptr->recording_name, | 
 | 			 qid_string); | 
 | 		cpcmd(cp_command, cp_response, sizeof(cp_response), NULL); | 
 | 	} | 
 |  | 
 | 	memset(cp_command, 0x00, sizeof(cp_command)); | 
 | 	memset(cp_response, 0x00, sizeof(cp_response)); | 
 | 	snprintf(cp_command, sizeof(cp_command), "RECORDING %s %s %s", | 
 | 		logptr->recording_name, | 
 | 		onoff, | 
 | 		qid_string); | 
 | 	cpcmd(cp_command, cp_response, sizeof(cp_response), NULL); | 
 | 	/* The recording command will usually answer with 'Command complete' | 
 | 	 * on success, but when the specific service was never connected | 
 | 	 * before then there might be an additional informational message | 
 | 	 * 'HCPCRC8072I Recording entry not found' before the | 
 | 	 * 'Command complete'. So I use strstr rather then the strncmp. | 
 | 	 */ | 
 | 	if (strstr(cp_response,"Command complete")) | 
 | 		rc = 0; | 
 | 	else | 
 | 		rc = -EIO; | 
 | 	/* | 
 | 	 * If we turn recording off, we have to purge any remaining records | 
 | 	 * afterwards, as a large number of queued records may impact z/VM | 
 | 	 * performance. | 
 | 	 */ | 
 | 	if (purge && (action == 0)) { | 
 | 		memset(cp_command, 0x00, sizeof(cp_command)); | 
 | 		memset(cp_response, 0x00, sizeof(cp_response)); | 
 | 		snprintf(cp_command, sizeof(cp_command), | 
 | 			 "RECORDING %s PURGE %s", | 
 | 			 logptr->recording_name, | 
 | 			 qid_string); | 
 | 		cpcmd(cp_command, cp_response, sizeof(cp_response), NULL); | 
 | 	} | 
 |  | 
 | 	return rc; | 
 | } | 
 |  | 
 |  | 
 | static int vmlogrdr_open (struct inode *inode, struct file *filp) | 
 | { | 
 | 	int dev_num = 0; | 
 | 	struct vmlogrdr_priv_t * logptr = NULL; | 
 | 	int connect_rc = 0; | 
 | 	int ret; | 
 |  | 
 | 	dev_num = iminor(inode); | 
 | 	if (dev_num >= MAXMINOR) | 
 | 		return -ENODEV; | 
 | 	logptr = &sys_ser[dev_num]; | 
 |  | 
 | 	/* | 
 | 	 * only allow for blocking reads to be open | 
 | 	 */ | 
 | 	if (filp->f_flags & O_NONBLOCK) | 
 | 		return -EOPNOTSUPP; | 
 |  | 
 | 	/* Besure this device hasn't already been opened */ | 
 | 	spin_lock_bh(&logptr->priv_lock); | 
 | 	if (logptr->dev_in_use)	{ | 
 | 		spin_unlock_bh(&logptr->priv_lock); | 
 | 		return -EBUSY; | 
 | 	} | 
 | 	logptr->dev_in_use = 1; | 
 | 	logptr->connection_established = 0; | 
 | 	logptr->iucv_path_severed = 0; | 
 | 	atomic_set(&logptr->receive_ready, 0); | 
 | 	logptr->buffer_free = 1; | 
 | 	spin_unlock_bh(&logptr->priv_lock); | 
 |  | 
 | 	/* set the file options */ | 
 | 	filp->private_data = logptr; | 
 |  | 
 | 	/* start recording for this service*/ | 
 | 	if (logptr->autorecording) { | 
 | 		ret = vmlogrdr_recording(logptr,1,logptr->autopurge); | 
 | 		if (ret) | 
 | 			pr_warn("vmlogrdr: failed to start recording automatically\n"); | 
 | 	} | 
 |  | 
 | 	/* create connection to the system service */ | 
 | 	logptr->path = iucv_path_alloc(10, 0, GFP_KERNEL); | 
 | 	if (!logptr->path) | 
 | 		goto out_dev; | 
 | 	connect_rc = iucv_path_connect(logptr->path, &vmlogrdr_iucv_handler, | 
 | 				       logptr->system_service, NULL, NULL, | 
 | 				       logptr); | 
 | 	if (connect_rc) { | 
 | 		pr_err("vmlogrdr: iucv connection to %s " | 
 | 		       "failed with rc %i \n", | 
 | 		       logptr->system_service, connect_rc); | 
 | 		goto out_path; | 
 | 	} | 
 |  | 
 | 	/* We've issued the connect and now we must wait for a | 
 | 	 * ConnectionComplete or ConnectinSevered Interrupt | 
 | 	 * before we can continue to process. | 
 | 	 */ | 
 | 	wait_event(conn_wait_queue, (logptr->connection_established) | 
 | 		   || (logptr->iucv_path_severed)); | 
 | 	if (logptr->iucv_path_severed) | 
 | 		goto out_record; | 
 | 	nonseekable_open(inode, filp); | 
 | 	return 0; | 
 |  | 
 | out_record: | 
 | 	if (logptr->autorecording) | 
 | 		vmlogrdr_recording(logptr,0,logptr->autopurge); | 
 | out_path: | 
 | 	kfree(logptr->path);	/* kfree(NULL) is ok. */ | 
 | 	logptr->path = NULL; | 
 | out_dev: | 
 | 	logptr->dev_in_use = 0; | 
 | 	return -EIO; | 
 | } | 
 |  | 
 |  | 
 | static int vmlogrdr_release (struct inode *inode, struct file *filp) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	struct vmlogrdr_priv_t * logptr = filp->private_data; | 
 |  | 
 | 	iucv_path_sever(logptr->path, NULL); | 
 | 	kfree(logptr->path); | 
 | 	logptr->path = NULL; | 
 | 	if (logptr->autorecording) { | 
 | 		ret = vmlogrdr_recording(logptr,0,logptr->autopurge); | 
 | 		if (ret) | 
 | 			pr_warn("vmlogrdr: failed to stop recording automatically\n"); | 
 | 	} | 
 | 	logptr->dev_in_use = 0; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | static int vmlogrdr_receive_data(struct vmlogrdr_priv_t *priv) | 
 | { | 
 | 	int rc, *temp; | 
 | 	/* we need to keep track of two data sizes here: | 
 | 	 * The number of bytes we need to receive from iucv and | 
 | 	 * the total number of bytes we actually write into the buffer. | 
 | 	 */ | 
 | 	int user_data_count, iucv_data_count; | 
 | 	char * buffer; | 
 |  | 
 | 	if (atomic_read(&priv->receive_ready)) { | 
 | 		spin_lock_bh(&priv->priv_lock); | 
 | 		if (priv->residual_length){ | 
 | 			/* receive second half of a record */ | 
 | 			iucv_data_count = priv->residual_length; | 
 | 			user_data_count = 0; | 
 | 			buffer = priv->buffer; | 
 | 		} else { | 
 | 			/* receive a new record: | 
 | 			 * We need to return the total length of the record | 
 |                          * + size of FENCE in the first 4 bytes of the buffer. | 
 | 		         */ | 
 | 			iucv_data_count = priv->local_interrupt_buffer.length; | 
 | 			user_data_count = sizeof(int); | 
 | 			temp = (int*)priv->buffer; | 
 | 			*temp= iucv_data_count + sizeof(FENCE); | 
 | 			buffer = priv->buffer + sizeof(int); | 
 | 		} | 
 | 		/* | 
 | 		 * If the record is bigger than our buffer, we receive only | 
 | 		 * a part of it. We can get the rest later. | 
 | 		 */ | 
 | 		if (iucv_data_count > NET_BUFFER_SIZE) | 
 | 			iucv_data_count = NET_BUFFER_SIZE; | 
 | 		rc = iucv_message_receive(priv->path, | 
 | 					  &priv->local_interrupt_buffer, | 
 | 					  0, buffer, iucv_data_count, | 
 | 					  &priv->residual_length); | 
 | 		spin_unlock_bh(&priv->priv_lock); | 
 | 		/* An rc of 5 indicates that the record was bigger than | 
 | 		 * the buffer, which is OK for us. A 9 indicates that the | 
 | 		 * record was purged befor we could receive it. | 
 | 		 */ | 
 | 		if (rc == 5) | 
 | 			rc = 0; | 
 | 		if (rc == 9) | 
 | 			atomic_set(&priv->receive_ready, 0); | 
 | 	} else { | 
 | 		rc = 1; | 
 | 	} | 
 | 	if (!rc) { | 
 | 		priv->buffer_free = 0; | 
 |  		user_data_count += iucv_data_count; | 
 | 		priv->current_position = priv->buffer; | 
 | 		if (priv->residual_length == 0){ | 
 | 			/* the whole record has been captured, | 
 | 			 * now add the fence */ | 
 | 			atomic_dec(&priv->receive_ready); | 
 | 			buffer = priv->buffer + user_data_count; | 
 | 			memcpy(buffer, FENCE, sizeof(FENCE)); | 
 | 			user_data_count += sizeof(FENCE); | 
 | 		} | 
 | 		priv->remaining = user_data_count; | 
 | 	} | 
 |  | 
 | 	return rc; | 
 | } | 
 |  | 
 |  | 
 | static ssize_t vmlogrdr_read(struct file *filp, char __user *data, | 
 | 			     size_t count, loff_t * ppos) | 
 | { | 
 | 	int rc; | 
 | 	struct vmlogrdr_priv_t * priv = filp->private_data; | 
 |  | 
 | 	while (priv->buffer_free) { | 
 | 		rc = vmlogrdr_receive_data(priv); | 
 | 		if (rc) { | 
 | 			rc = wait_event_interruptible(read_wait_queue, | 
 | 					atomic_read(&priv->receive_ready)); | 
 | 			if (rc) | 
 | 				return rc; | 
 | 		} | 
 | 	} | 
 | 	/* copy only up to end of record */ | 
 | 	if (count > priv->remaining) | 
 | 		count = priv->remaining; | 
 |  | 
 | 	if (copy_to_user(data, priv->current_position, count)) | 
 | 		return -EFAULT; | 
 |  | 
 | 	*ppos += count; | 
 | 	priv->current_position += count; | 
 | 	priv->remaining -= count; | 
 |  | 
 | 	/* if all data has been transferred, set buffer free */ | 
 | 	if (priv->remaining == 0) | 
 | 		priv->buffer_free = 1; | 
 |  | 
 | 	return count; | 
 | } | 
 |  | 
 | static ssize_t vmlogrdr_autopurge_store(struct device * dev, | 
 | 					struct device_attribute *attr, | 
 | 					const char * buf, size_t count) | 
 | { | 
 | 	struct vmlogrdr_priv_t *priv = dev_get_drvdata(dev); | 
 | 	ssize_t ret = count; | 
 |  | 
 | 	switch (buf[0]) { | 
 | 	case '0': | 
 | 		priv->autopurge=0; | 
 | 		break; | 
 | 	case '1': | 
 | 		priv->autopurge=1; | 
 | 		break; | 
 | 	default: | 
 | 		ret = -EINVAL; | 
 | 	} | 
 | 	return ret; | 
 | } | 
 |  | 
 |  | 
 | static ssize_t vmlogrdr_autopurge_show(struct device *dev, | 
 | 				       struct device_attribute *attr, | 
 | 				       char *buf) | 
 | { | 
 | 	struct vmlogrdr_priv_t *priv = dev_get_drvdata(dev); | 
 | 	return sprintf(buf, "%u\n", priv->autopurge); | 
 | } | 
 |  | 
 |  | 
 | static DEVICE_ATTR(autopurge, 0644, vmlogrdr_autopurge_show, | 
 | 		   vmlogrdr_autopurge_store); | 
 |  | 
 |  | 
 | static ssize_t vmlogrdr_purge_store(struct device * dev, | 
 | 				    struct device_attribute *attr, | 
 | 				    const char * buf, size_t count) | 
 | { | 
 |  | 
 | 	char cp_command[80]; | 
 | 	char cp_response[80]; | 
 | 	struct vmlogrdr_priv_t *priv = dev_get_drvdata(dev); | 
 |  | 
 | 	if (buf[0] != '1') | 
 | 		return -EINVAL; | 
 |  | 
 | 	memset(cp_command, 0x00, sizeof(cp_command)); | 
 | 	memset(cp_response, 0x00, sizeof(cp_response)); | 
 |  | 
 |         /* | 
 | 	 * The recording command needs to be called with option QID | 
 | 	 * for guests that have previlege classes A or B. | 
 | 	 * Other guests will not recognize the command and we have to | 
 | 	 * issue the same command without the QID parameter. | 
 | 	 */ | 
 |  | 
 | 	if (recording_class_AB) | 
 | 		snprintf(cp_command, sizeof(cp_command), | 
 | 			 "RECORDING %s PURGE QID * ", | 
 | 			 priv->recording_name); | 
 | 	else | 
 | 		snprintf(cp_command, sizeof(cp_command), | 
 | 			 "RECORDING %s PURGE ", | 
 | 			 priv->recording_name); | 
 |  | 
 | 	cpcmd(cp_command, cp_response, sizeof(cp_response), NULL); | 
 |  | 
 | 	return count; | 
 | } | 
 |  | 
 |  | 
 | static DEVICE_ATTR(purge, 0200, NULL, vmlogrdr_purge_store); | 
 |  | 
 |  | 
 | static ssize_t vmlogrdr_autorecording_store(struct device *dev, | 
 | 					    struct device_attribute *attr, | 
 | 					    const char *buf, size_t count) | 
 | { | 
 | 	struct vmlogrdr_priv_t *priv = dev_get_drvdata(dev); | 
 | 	ssize_t ret = count; | 
 |  | 
 | 	switch (buf[0]) { | 
 | 	case '0': | 
 | 		priv->autorecording=0; | 
 | 		break; | 
 | 	case '1': | 
 | 		priv->autorecording=1; | 
 | 		break; | 
 | 	default: | 
 | 		ret = -EINVAL; | 
 | 	} | 
 | 	return ret; | 
 | } | 
 |  | 
 |  | 
 | static ssize_t vmlogrdr_autorecording_show(struct device *dev, | 
 | 					   struct device_attribute *attr, | 
 | 					   char *buf) | 
 | { | 
 | 	struct vmlogrdr_priv_t *priv = dev_get_drvdata(dev); | 
 | 	return sprintf(buf, "%u\n", priv->autorecording); | 
 | } | 
 |  | 
 |  | 
 | static DEVICE_ATTR(autorecording, 0644, vmlogrdr_autorecording_show, | 
 | 		   vmlogrdr_autorecording_store); | 
 |  | 
 |  | 
 | static ssize_t vmlogrdr_recording_store(struct device * dev, | 
 | 					struct device_attribute *attr, | 
 | 					const char * buf, size_t count) | 
 | { | 
 | 	struct vmlogrdr_priv_t *priv = dev_get_drvdata(dev); | 
 | 	ssize_t ret; | 
 |  | 
 | 	switch (buf[0]) { | 
 | 	case '0': | 
 | 		ret = vmlogrdr_recording(priv,0,0); | 
 | 		break; | 
 | 	case '1': | 
 | 		ret = vmlogrdr_recording(priv,1,0); | 
 | 		break; | 
 | 	default: | 
 | 		ret = -EINVAL; | 
 | 	} | 
 | 	if (ret) | 
 | 		return ret; | 
 | 	else | 
 | 		return count; | 
 |  | 
 | } | 
 |  | 
 |  | 
 | static DEVICE_ATTR(recording, 0200, NULL, vmlogrdr_recording_store); | 
 |  | 
 |  | 
 | static ssize_t recording_status_show(struct device_driver *driver, char *buf) | 
 | { | 
 | 	static const char cp_command[] = "QUERY RECORDING "; | 
 | 	int len; | 
 |  | 
 | 	cpcmd(cp_command, buf, 4096, NULL); | 
 | 	len = strlen(buf); | 
 | 	return len; | 
 | } | 
 | static DRIVER_ATTR_RO(recording_status); | 
 | static struct attribute *vmlogrdr_drv_attrs[] = { | 
 | 	&driver_attr_recording_status.attr, | 
 | 	NULL, | 
 | }; | 
 | static struct attribute_group vmlogrdr_drv_attr_group = { | 
 | 	.attrs = vmlogrdr_drv_attrs, | 
 | }; | 
 | static const struct attribute_group *vmlogrdr_drv_attr_groups[] = { | 
 | 	&vmlogrdr_drv_attr_group, | 
 | 	NULL, | 
 | }; | 
 |  | 
 | static struct attribute *vmlogrdr_attrs[] = { | 
 | 	&dev_attr_autopurge.attr, | 
 | 	&dev_attr_purge.attr, | 
 | 	&dev_attr_autorecording.attr, | 
 | 	&dev_attr_recording.attr, | 
 | 	NULL, | 
 | }; | 
 | static struct attribute_group vmlogrdr_attr_group = { | 
 | 	.attrs = vmlogrdr_attrs, | 
 | }; | 
 | static const struct attribute_group *vmlogrdr_attr_groups[] = { | 
 | 	&vmlogrdr_attr_group, | 
 | 	NULL, | 
 | }; | 
 |  | 
 | static int vmlogrdr_pm_prepare(struct device *dev) | 
 | { | 
 | 	int rc; | 
 | 	struct vmlogrdr_priv_t *priv = dev_get_drvdata(dev); | 
 |  | 
 | 	rc = 0; | 
 | 	if (priv) { | 
 | 		spin_lock_bh(&priv->priv_lock); | 
 | 		if (priv->dev_in_use) | 
 | 			rc = -EBUSY; | 
 | 		spin_unlock_bh(&priv->priv_lock); | 
 | 	} | 
 | 	if (rc) | 
 | 		pr_err("vmlogrdr: device %s is busy. Refuse to suspend.\n", | 
 | 		       dev_name(dev)); | 
 | 	return rc; | 
 | } | 
 |  | 
 |  | 
 | static const struct dev_pm_ops vmlogrdr_pm_ops = { | 
 | 	.prepare = vmlogrdr_pm_prepare, | 
 | }; | 
 |  | 
 | static struct class *vmlogrdr_class; | 
 | static struct device_driver vmlogrdr_driver = { | 
 | 	.name = "vmlogrdr", | 
 | 	.bus  = &iucv_bus, | 
 | 	.pm = &vmlogrdr_pm_ops, | 
 | 	.groups = vmlogrdr_drv_attr_groups, | 
 | }; | 
 |  | 
 | static int vmlogrdr_register_driver(void) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	/* Register with iucv driver */ | 
 | 	ret = iucv_register(&vmlogrdr_iucv_handler, 1); | 
 | 	if (ret) | 
 | 		goto out; | 
 |  | 
 | 	ret = driver_register(&vmlogrdr_driver); | 
 | 	if (ret) | 
 | 		goto out_iucv; | 
 |  | 
 | 	vmlogrdr_class = class_create(THIS_MODULE, "vmlogrdr"); | 
 | 	if (IS_ERR(vmlogrdr_class)) { | 
 | 		ret = PTR_ERR(vmlogrdr_class); | 
 | 		vmlogrdr_class = NULL; | 
 | 		goto out_driver; | 
 | 	} | 
 | 	return 0; | 
 |  | 
 | out_driver: | 
 | 	driver_unregister(&vmlogrdr_driver); | 
 | out_iucv: | 
 | 	iucv_unregister(&vmlogrdr_iucv_handler, 1); | 
 | out: | 
 | 	return ret; | 
 | } | 
 |  | 
 |  | 
 | static void vmlogrdr_unregister_driver(void) | 
 | { | 
 | 	class_destroy(vmlogrdr_class); | 
 | 	vmlogrdr_class = NULL; | 
 | 	driver_unregister(&vmlogrdr_driver); | 
 | 	iucv_unregister(&vmlogrdr_iucv_handler, 1); | 
 | } | 
 |  | 
 |  | 
 | static int vmlogrdr_register_device(struct vmlogrdr_priv_t *priv) | 
 | { | 
 | 	struct device *dev; | 
 | 	int ret; | 
 |  | 
 | 	dev = kzalloc(sizeof(struct device), GFP_KERNEL); | 
 | 	if (dev) { | 
 | 		dev_set_name(dev, "%s", priv->internal_name); | 
 | 		dev->bus = &iucv_bus; | 
 | 		dev->parent = iucv_root; | 
 | 		dev->driver = &vmlogrdr_driver; | 
 | 		dev->groups = vmlogrdr_attr_groups; | 
 | 		dev_set_drvdata(dev, priv); | 
 | 		/* | 
 | 		 * The release function could be called after the | 
 | 		 * module has been unloaded. It's _only_ task is to | 
 | 		 * free the struct. Therefore, we specify kfree() | 
 | 		 * directly here. (Probably a little bit obfuscating | 
 | 		 * but legitime ...). | 
 | 		 */ | 
 | 		dev->release = (void (*)(struct device *))kfree; | 
 | 	} else | 
 | 		return -ENOMEM; | 
 | 	ret = device_register(dev); | 
 | 	if (ret) { | 
 | 		put_device(dev); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	priv->class_device = device_create(vmlogrdr_class, dev, | 
 | 					   MKDEV(vmlogrdr_major, | 
 | 						 priv->minor_num), | 
 | 					   priv, "%s", dev_name(dev)); | 
 | 	if (IS_ERR(priv->class_device)) { | 
 | 		ret = PTR_ERR(priv->class_device); | 
 | 		priv->class_device=NULL; | 
 | 		device_unregister(dev); | 
 | 		return ret; | 
 | 	} | 
 | 	priv->device = dev; | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | static int vmlogrdr_unregister_device(struct vmlogrdr_priv_t *priv) | 
 | { | 
 | 	device_destroy(vmlogrdr_class, MKDEV(vmlogrdr_major, priv->minor_num)); | 
 | 	if (priv->device != NULL) { | 
 | 		device_unregister(priv->device); | 
 | 		priv->device=NULL; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | static int vmlogrdr_register_cdev(dev_t dev) | 
 | { | 
 | 	int rc = 0; | 
 | 	vmlogrdr_cdev = cdev_alloc(); | 
 | 	if (!vmlogrdr_cdev) { | 
 | 		return -ENOMEM; | 
 | 	} | 
 | 	vmlogrdr_cdev->owner = THIS_MODULE; | 
 | 	vmlogrdr_cdev->ops = &vmlogrdr_fops; | 
 | 	rc = cdev_add(vmlogrdr_cdev, dev, MAXMINOR); | 
 | 	if (!rc) | 
 | 		return 0; | 
 |  | 
 | 	// cleanup: cdev is not fully registered, no cdev_del here! | 
 | 	kobject_put(&vmlogrdr_cdev->kobj); | 
 | 	vmlogrdr_cdev=NULL; | 
 | 	return rc; | 
 | } | 
 |  | 
 |  | 
 | static void vmlogrdr_cleanup(void) | 
 | { | 
 |         int i; | 
 |  | 
 | 	if (vmlogrdr_cdev) { | 
 | 		cdev_del(vmlogrdr_cdev); | 
 | 		vmlogrdr_cdev=NULL; | 
 | 	} | 
 | 	for (i=0; i < MAXMINOR; ++i ) { | 
 | 		vmlogrdr_unregister_device(&sys_ser[i]); | 
 | 		free_page((unsigned long)sys_ser[i].buffer); | 
 | 	} | 
 | 	vmlogrdr_unregister_driver(); | 
 | 	if (vmlogrdr_major) { | 
 | 		unregister_chrdev_region(MKDEV(vmlogrdr_major, 0), MAXMINOR); | 
 | 		vmlogrdr_major=0; | 
 | 	} | 
 | } | 
 |  | 
 |  | 
 | static int __init vmlogrdr_init(void) | 
 | { | 
 | 	int rc; | 
 | 	int i; | 
 | 	dev_t dev; | 
 |  | 
 | 	if (! MACHINE_IS_VM) { | 
 | 		pr_err("not running under VM, driver not loaded.\n"); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 |         recording_class_AB = vmlogrdr_get_recording_class_AB(); | 
 |  | 
 | 	rc = alloc_chrdev_region(&dev, 0, MAXMINOR, "vmlogrdr"); | 
 | 	if (rc) | 
 | 		return rc; | 
 | 	vmlogrdr_major = MAJOR(dev); | 
 |  | 
 | 	rc=vmlogrdr_register_driver(); | 
 | 	if (rc) | 
 | 		goto cleanup; | 
 |  | 
 | 	for (i=0; i < MAXMINOR; ++i ) { | 
 | 		sys_ser[i].buffer = (char *) get_zeroed_page(GFP_KERNEL | GFP_DMA); | 
 | 		if (!sys_ser[i].buffer) { | 
 | 			rc = -ENOMEM; | 
 | 			break; | 
 | 		} | 
 | 		sys_ser[i].current_position = sys_ser[i].buffer; | 
 | 		rc=vmlogrdr_register_device(&sys_ser[i]); | 
 | 		if (rc) | 
 | 			break; | 
 | 	} | 
 | 	if (rc) | 
 | 		goto cleanup; | 
 |  | 
 | 	rc = vmlogrdr_register_cdev(dev); | 
 | 	if (rc) | 
 | 		goto cleanup; | 
 | 	return 0; | 
 |  | 
 | cleanup: | 
 | 	vmlogrdr_cleanup(); | 
 | 	return rc; | 
 | } | 
 |  | 
 |  | 
 | static void __exit vmlogrdr_exit(void) | 
 | { | 
 | 	vmlogrdr_cleanup(); | 
 | 	return; | 
 | } | 
 |  | 
 |  | 
 | module_init(vmlogrdr_init); | 
 | module_exit(vmlogrdr_exit); |