| /* SPDX-License-Identifier: GPL-2.0 */ | |
| #ifndef _LINUX_TTY_PORT_H | |
| #define _LINUX_TTY_PORT_H | |
| #include <linux/kfifo.h> | |
| #include <linux/kref.h> | |
| #include <linux/mutex.h> | |
| #include <linux/tty_buffer.h> | |
| #include <linux/wait.h> | |
| struct attribute_group; | |
| struct tty_driver; | |
| struct tty_port; | |
| struct tty_struct; | |
| /** | |
| * struct tty_port_operations -- operations on tty_port | |
| * @carrier_raised: return true if the carrier is raised on @port | |
| * @dtr_rts: raise the DTR line if @active is true, otherwise lower DTR | |
| * @shutdown: called when the last close completes or a hangup finishes IFF the | |
| * port was initialized. Do not use to free resources. Turn off the device | |
| * only. Called under the port mutex to serialize against @activate and | |
| * @shutdown. | |
| * @activate: called under the port mutex from tty_port_open(), serialized using | |
| * the port mutex. Supposed to turn on the device. | |
| * | |
| * FIXME: long term getting the tty argument *out* of this would be good | |
| * for consoles. | |
| * | |
| * @destruct: called on the final put of a port. Free resources, possibly incl. | |
| * the port itself. | |
| */ | |
| struct tty_port_operations { | |
| bool (*carrier_raised)(struct tty_port *port); | |
| void (*dtr_rts)(struct tty_port *port, bool active); | |
| void (*shutdown)(struct tty_port *port); | |
| int (*activate)(struct tty_port *port, struct tty_struct *tty); | |
| void (*destruct)(struct tty_port *port); | |
| }; | |
| struct tty_port_client_operations { | |
| size_t (*receive_buf)(struct tty_port *port, const u8 *cp, const u8 *fp, | |
| size_t count); | |
| void (*lookahead_buf)(struct tty_port *port, const u8 *cp, | |
| const u8 *fp, size_t count); | |
| void (*write_wakeup)(struct tty_port *port); | |
| }; | |
| extern const struct tty_port_client_operations tty_port_default_client_ops; | |
| /** | |
| * struct tty_port -- port level information | |
| * | |
| * @buf: buffer for this port, locked internally | |
| * @tty: back pointer to &struct tty_struct, valid only if the tty is open. Use | |
| * tty_port_tty_get() to obtain it (and tty_kref_put() to release). | |
| * @itty: internal back pointer to &struct tty_struct. Avoid this. It should be | |
| * eliminated in the long term. | |
| * @ops: tty port operations (like activate, shutdown), see &struct | |
| * tty_port_operations | |
| * @client_ops: tty port client operations (like receive_buf, write_wakeup). | |
| * By default, tty_port_default_client_ops is used. | |
| * @lock: lock protecting @tty | |
| * @blocked_open: # of procs waiting for open in tty_port_block_til_ready() | |
| * @count: usage count | |
| * @open_wait: open waiters queue (waiting e.g. for a carrier) | |
| * @delta_msr_wait: modem status change queue (waiting for MSR changes) | |
| * @flags: user TTY flags (%ASYNC_) | |
| * @iflags: internal flags (%TTY_PORT_) | |
| * @console: when set, the port is a console | |
| * @mutex: locking, for open, shutdown and other port operations | |
| * @buf_mutex: @xmit_buf alloc lock | |
| * @xmit_buf: optional xmit buffer used by some drivers | |
| * @xmit_fifo: optional xmit buffer used by some drivers | |
| * @close_delay: delay in jiffies to wait when closing the port | |
| * @closing_wait: delay in jiffies for output to be sent before closing | |
| * @drain_delay: set to zero if no pure time based drain is needed else set to | |
| * size of fifo | |
| * @kref: references counter. Reaching zero calls @ops->destruct() if non-%NULL | |
| * or frees the port otherwise. | |
| * @client_data: pointer to private data, for @client_ops | |
| * | |
| * Each device keeps its own port level information. &struct tty_port was | |
| * introduced as a common structure for such information. As every TTY device | |
| * shall have a backing tty_port structure, every driver can use these members. | |
| * | |
| * The tty port has a different lifetime to the tty so must be kept apart. | |
| * In addition be careful as tty -> port mappings are valid for the life | |
| * of the tty object but in many cases port -> tty mappings are valid only | |
| * until a hangup so don't use the wrong path. | |
| * | |
| * Tty port shall be initialized by tty_port_init() and shut down either by | |
| * tty_port_destroy() (refcounting not used), or tty_port_put() (refcounting). | |
| * | |
| * There is a lot of helpers around &struct tty_port too. To name the most | |
| * significant ones: tty_port_open(), tty_port_close() (or | |
| * tty_port_close_start() and tty_port_close_end() separately if need be), and | |
| * tty_port_hangup(). These call @ops->activate() and @ops->shutdown() as | |
| * needed. | |
| */ | |
| struct tty_port { | |
| struct tty_bufhead buf; | |
| struct tty_struct *tty; | |
| struct tty_struct *itty; | |
| const struct tty_port_operations *ops; | |
| const struct tty_port_client_operations *client_ops; | |
| spinlock_t lock; | |
| int blocked_open; | |
| int count; | |
| wait_queue_head_t open_wait; | |
| wait_queue_head_t delta_msr_wait; | |
| unsigned long flags; | |
| unsigned long iflags; | |
| unsigned char console:1; | |
| struct mutex mutex; | |
| struct mutex buf_mutex; | |
| u8 *xmit_buf; | |
| DECLARE_KFIFO_PTR(xmit_fifo, u8); | |
| unsigned int close_delay; | |
| unsigned int closing_wait; | |
| int drain_delay; | |
| struct kref kref; | |
| void *client_data; | |
| }; | |
| /* tty_port::iflags bits -- use atomic bit ops */ | |
| #define TTY_PORT_INITIALIZED 0 /* device is initialized */ | |
| #define TTY_PORT_SUSPENDED 1 /* device is suspended */ | |
| #define TTY_PORT_ACTIVE 2 /* device is open */ | |
| /* | |
| * uart drivers: use the uart_port::status field and the UPSTAT_* defines | |
| * for s/w-based flow control steering and carrier detection status | |
| */ | |
| #define TTY_PORT_CTS_FLOW 3 /* h/w flow control enabled */ | |
| #define TTY_PORT_CHECK_CD 4 /* carrier detect enabled */ | |
| #define TTY_PORT_KOPENED 5 /* device exclusively opened by | |
| kernel */ | |
| void tty_port_init(struct tty_port *port); | |
| void tty_port_link_device(struct tty_port *port, struct tty_driver *driver, | |
| unsigned index); | |
| struct device *tty_port_register_device(struct tty_port *port, | |
| struct tty_driver *driver, unsigned index, | |
| struct device *device); | |
| struct device *tty_port_register_device_attr(struct tty_port *port, | |
| struct tty_driver *driver, unsigned index, | |
| struct device *device, void *drvdata, | |
| const struct attribute_group **attr_grp); | |
| struct device *tty_port_register_device_attr_serdev(struct tty_port *port, | |
| struct tty_driver *driver, unsigned index, | |
| struct device *host, struct device *parent, void *drvdata, | |
| const struct attribute_group **attr_grp); | |
| void tty_port_unregister_device(struct tty_port *port, | |
| struct tty_driver *driver, unsigned index); | |
| int tty_port_alloc_xmit_buf(struct tty_port *port); | |
| void tty_port_free_xmit_buf(struct tty_port *port); | |
| void tty_port_destroy(struct tty_port *port); | |
| void tty_port_put(struct tty_port *port); | |
| static inline struct tty_port *tty_port_get(struct tty_port *port) | |
| { | |
| if (port && kref_get_unless_zero(&port->kref)) | |
| return port; | |
| return NULL; | |
| } | |
| /* If the cts flow control is enabled, return true. */ | |
| static inline bool tty_port_cts_enabled(const struct tty_port *port) | |
| { | |
| return test_bit(TTY_PORT_CTS_FLOW, &port->iflags); | |
| } | |
| static inline void tty_port_set_cts_flow(struct tty_port *port, bool val) | |
| { | |
| assign_bit(TTY_PORT_CTS_FLOW, &port->iflags, val); | |
| } | |
| static inline bool tty_port_active(const struct tty_port *port) | |
| { | |
| return test_bit(TTY_PORT_ACTIVE, &port->iflags); | |
| } | |
| static inline void tty_port_set_active(struct tty_port *port, bool val) | |
| { | |
| assign_bit(TTY_PORT_ACTIVE, &port->iflags, val); | |
| } | |
| static inline bool tty_port_check_carrier(const struct tty_port *port) | |
| { | |
| return test_bit(TTY_PORT_CHECK_CD, &port->iflags); | |
| } | |
| static inline void tty_port_set_check_carrier(struct tty_port *port, bool val) | |
| { | |
| assign_bit(TTY_PORT_CHECK_CD, &port->iflags, val); | |
| } | |
| static inline bool tty_port_suspended(const struct tty_port *port) | |
| { | |
| return test_bit(TTY_PORT_SUSPENDED, &port->iflags); | |
| } | |
| static inline void tty_port_set_suspended(struct tty_port *port, bool val) | |
| { | |
| assign_bit(TTY_PORT_SUSPENDED, &port->iflags, val); | |
| } | |
| static inline bool tty_port_initialized(const struct tty_port *port) | |
| { | |
| return test_bit(TTY_PORT_INITIALIZED, &port->iflags); | |
| } | |
| static inline void tty_port_set_initialized(struct tty_port *port, bool val) | |
| { | |
| assign_bit(TTY_PORT_INITIALIZED, &port->iflags, val); | |
| } | |
| static inline bool tty_port_kopened(const struct tty_port *port) | |
| { | |
| return test_bit(TTY_PORT_KOPENED, &port->iflags); | |
| } | |
| static inline void tty_port_set_kopened(struct tty_port *port, bool val) | |
| { | |
| assign_bit(TTY_PORT_KOPENED, &port->iflags, val); | |
| } | |
| struct tty_struct *tty_port_tty_get(struct tty_port *port); | |
| void tty_port_tty_set(struct tty_port *port, struct tty_struct *tty); | |
| bool tty_port_carrier_raised(struct tty_port *port); | |
| void tty_port_raise_dtr_rts(struct tty_port *port); | |
| void tty_port_lower_dtr_rts(struct tty_port *port); | |
| void tty_port_hangup(struct tty_port *port); | |
| void __tty_port_tty_hangup(struct tty_port *port, bool check_clocal, bool async); | |
| void tty_port_tty_wakeup(struct tty_port *port); | |
| int tty_port_block_til_ready(struct tty_port *port, struct tty_struct *tty, | |
| struct file *filp); | |
| int tty_port_close_start(struct tty_port *port, struct tty_struct *tty, | |
| struct file *filp); | |
| void tty_port_close_end(struct tty_port *port, struct tty_struct *tty); | |
| void tty_port_close(struct tty_port *port, struct tty_struct *tty, | |
| struct file *filp); | |
| int tty_port_install(struct tty_port *port, struct tty_driver *driver, | |
| struct tty_struct *tty); | |
| int tty_port_open(struct tty_port *port, struct tty_struct *tty, | |
| struct file *filp); | |
| static inline int tty_port_users(struct tty_port *port) | |
| { | |
| return port->count + port->blocked_open; | |
| } | |
| /** | |
| * tty_port_tty_hangup - helper to hang up a tty asynchronously | |
| * @port: tty port | |
| * @check_clocal: hang only ttys with %CLOCAL unset? | |
| */ | |
| static inline void tty_port_tty_hangup(struct tty_port *port, bool check_clocal) | |
| { | |
| __tty_port_tty_hangup(port, check_clocal, true); | |
| } | |
| /** | |
| * tty_port_tty_vhangup - helper to hang up a tty synchronously | |
| * @port: tty port | |
| */ | |
| static inline void tty_port_tty_vhangup(struct tty_port *port) | |
| { | |
| __tty_port_tty_hangup(port, false, false); | |
| } | |
| #ifdef CONFIG_TTY | |
| void tty_kref_put(struct tty_struct *tty); | |
| __DEFINE_CLASS_IS_CONDITIONAL(tty_port_tty, true); | |
| __DEFINE_UNLOCK_GUARD(tty_port_tty, struct tty_struct, tty_kref_put(_T->lock)); | |
| static inline class_tty_port_tty_t class_tty_port_tty_constructor(struct tty_port *tport) | |
| { | |
| class_tty_port_tty_t _t = { | |
| .lock = tty_port_tty_get(tport), | |
| }; | |
| return _t; | |
| } | |
| #define scoped_tty() ((struct tty_struct *)(__guard_ptr(tty_port_tty)(&scope))) | |
| #endif | |
| #endif |