| // SPDX-License-Identifier: GPL-2.0-only | 
 | /* | 
 |  * SCOM FSI Client device driver | 
 |  * | 
 |  * Copyright (C) IBM Corporation 2016 | 
 |  */ | 
 |  | 
 | #include <linux/fsi.h> | 
 | #include <linux/module.h> | 
 | #include <linux/cdev.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/fs.h> | 
 | #include <linux/uaccess.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/list.h> | 
 |  | 
 | #include <uapi/linux/fsi.h> | 
 |  | 
 | #define FSI_ENGID_SCOM		0x5 | 
 |  | 
 | /* SCOM engine register set */ | 
 | #define SCOM_DATA0_REG		0x00 | 
 | #define SCOM_DATA1_REG		0x04 | 
 | #define SCOM_CMD_REG		0x08 | 
 | #define SCOM_FSI2PIB_RESET_REG	0x18 | 
 | #define SCOM_STATUS_REG		0x1C /* Read */ | 
 | #define SCOM_PIB_RESET_REG	0x1C /* Write */ | 
 |  | 
 | /* Command register */ | 
 | #define SCOM_WRITE_CMD		0x80000000 | 
 | #define SCOM_READ_CMD		0x00000000 | 
 |  | 
 | /* Status register bits */ | 
 | #define SCOM_STATUS_ERR_SUMMARY		0x80000000 | 
 | #define SCOM_STATUS_PROTECTION		0x01000000 | 
 | #define SCOM_STATUS_PARITY		0x04000000 | 
 | #define SCOM_STATUS_PIB_ABORT		0x00100000 | 
 | #define SCOM_STATUS_PIB_RESP_MASK	0x00007000 | 
 | #define SCOM_STATUS_PIB_RESP_SHIFT	12 | 
 |  | 
 | #define SCOM_STATUS_FSI2PIB_ERROR	(SCOM_STATUS_PROTECTION |	\ | 
 | 					 SCOM_STATUS_PARITY |		\ | 
 | 					 SCOM_STATUS_PIB_ABORT) | 
 | #define SCOM_STATUS_ANY_ERR		(SCOM_STATUS_FSI2PIB_ERROR |	\ | 
 | 					 SCOM_STATUS_PIB_RESP_MASK) | 
 | /* SCOM address encodings */ | 
 | #define XSCOM_ADDR_IND_FLAG		BIT_ULL(63) | 
 | #define XSCOM_ADDR_INF_FORM1		BIT_ULL(60) | 
 |  | 
 | /* SCOM indirect stuff */ | 
 | #define XSCOM_ADDR_DIRECT_PART		0x7fffffffull | 
 | #define XSCOM_ADDR_INDIRECT_PART	0x000fffff00000000ull | 
 | #define XSCOM_DATA_IND_READ		BIT_ULL(63) | 
 | #define XSCOM_DATA_IND_COMPLETE		BIT_ULL(31) | 
 | #define XSCOM_DATA_IND_ERR_MASK		0x70000000ull | 
 | #define XSCOM_DATA_IND_ERR_SHIFT	28 | 
 | #define XSCOM_DATA_IND_DATA		0x0000ffffull | 
 | #define XSCOM_DATA_IND_FORM1_DATA	0x000fffffffffffffull | 
 | #define XSCOM_ADDR_FORM1_LOW		0x000ffffffffull | 
 | #define XSCOM_ADDR_FORM1_HI		0xfff00000000ull | 
 | #define XSCOM_ADDR_FORM1_HI_SHIFT	20 | 
 |  | 
 | /* Retries */ | 
 | #define SCOM_MAX_IND_RETRIES		10	/* Retries indirect not ready */ | 
 |  | 
 | struct scom_device { | 
 | 	struct list_head link; | 
 | 	struct fsi_device *fsi_dev; | 
 | 	struct device dev; | 
 | 	struct cdev cdev; | 
 | 	struct mutex lock; | 
 | 	bool dead; | 
 | }; | 
 |  | 
 | static int __put_scom(struct scom_device *scom_dev, uint64_t value, | 
 | 		      uint32_t addr, uint32_t *status) | 
 | { | 
 | 	__be32 data, raw_status; | 
 | 	int rc; | 
 |  | 
 | 	data = cpu_to_be32((value >> 32) & 0xffffffff); | 
 | 	rc = fsi_device_write(scom_dev->fsi_dev, SCOM_DATA0_REG, &data, | 
 | 				sizeof(uint32_t)); | 
 | 	if (rc) | 
 | 		return rc; | 
 |  | 
 | 	data = cpu_to_be32(value & 0xffffffff); | 
 | 	rc = fsi_device_write(scom_dev->fsi_dev, SCOM_DATA1_REG, &data, | 
 | 				sizeof(uint32_t)); | 
 | 	if (rc) | 
 | 		return rc; | 
 |  | 
 | 	data = cpu_to_be32(SCOM_WRITE_CMD | addr); | 
 | 	rc = fsi_device_write(scom_dev->fsi_dev, SCOM_CMD_REG, &data, | 
 | 				sizeof(uint32_t)); | 
 | 	if (rc) | 
 | 		return rc; | 
 | 	rc = fsi_device_read(scom_dev->fsi_dev, SCOM_STATUS_REG, &raw_status, | 
 | 			     sizeof(uint32_t)); | 
 | 	if (rc) | 
 | 		return rc; | 
 | 	*status = be32_to_cpu(raw_status); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int __get_scom(struct scom_device *scom_dev, uint64_t *value, | 
 | 		      uint32_t addr, uint32_t *status) | 
 | { | 
 | 	__be32 data, raw_status; | 
 | 	int rc; | 
 |  | 
 |  | 
 | 	*value = 0ULL; | 
 | 	data = cpu_to_be32(SCOM_READ_CMD | addr); | 
 | 	rc = fsi_device_write(scom_dev->fsi_dev, SCOM_CMD_REG, &data, | 
 | 				sizeof(uint32_t)); | 
 | 	if (rc) | 
 | 		return rc; | 
 | 	rc = fsi_device_read(scom_dev->fsi_dev, SCOM_STATUS_REG, &raw_status, | 
 | 			     sizeof(uint32_t)); | 
 | 	if (rc) | 
 | 		return rc; | 
 |  | 
 | 	/* | 
 | 	 * Read the data registers even on error, so we don't have | 
 | 	 * to interpret the status register here. | 
 | 	 */ | 
 | 	rc = fsi_device_read(scom_dev->fsi_dev, SCOM_DATA0_REG, &data, | 
 | 				sizeof(uint32_t)); | 
 | 	if (rc) | 
 | 		return rc; | 
 | 	*value |= (uint64_t)be32_to_cpu(data) << 32; | 
 | 	rc = fsi_device_read(scom_dev->fsi_dev, SCOM_DATA1_REG, &data, | 
 | 				sizeof(uint32_t)); | 
 | 	if (rc) | 
 | 		return rc; | 
 | 	*value |= be32_to_cpu(data); | 
 | 	*status = be32_to_cpu(raw_status); | 
 |  | 
 | 	return rc; | 
 | } | 
 |  | 
 | static int put_indirect_scom_form0(struct scom_device *scom, uint64_t value, | 
 | 				   uint64_t addr, uint32_t *status) | 
 | { | 
 | 	uint64_t ind_data, ind_addr; | 
 | 	int rc, err; | 
 |  | 
 | 	if (value & ~XSCOM_DATA_IND_DATA) | 
 | 		return -EINVAL; | 
 |  | 
 | 	ind_addr = addr & XSCOM_ADDR_DIRECT_PART; | 
 | 	ind_data = (addr & XSCOM_ADDR_INDIRECT_PART) | value; | 
 | 	rc = __put_scom(scom, ind_data, ind_addr, status); | 
 | 	if (rc || (*status & SCOM_STATUS_ANY_ERR)) | 
 | 		return rc; | 
 |  | 
 | 	rc = __get_scom(scom, &ind_data, addr, status); | 
 | 	if (rc || (*status & SCOM_STATUS_ANY_ERR)) | 
 | 		return rc; | 
 |  | 
 | 	err = (ind_data & XSCOM_DATA_IND_ERR_MASK) >> XSCOM_DATA_IND_ERR_SHIFT; | 
 | 	*status = err << SCOM_STATUS_PIB_RESP_SHIFT; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int put_indirect_scom_form1(struct scom_device *scom, uint64_t value, | 
 | 				   uint64_t addr, uint32_t *status) | 
 | { | 
 | 	uint64_t ind_data, ind_addr; | 
 |  | 
 | 	if (value & ~XSCOM_DATA_IND_FORM1_DATA) | 
 | 		return -EINVAL; | 
 |  | 
 | 	ind_addr = addr & XSCOM_ADDR_FORM1_LOW; | 
 | 	ind_data = value | (addr & XSCOM_ADDR_FORM1_HI) << XSCOM_ADDR_FORM1_HI_SHIFT; | 
 | 	return __put_scom(scom, ind_data, ind_addr, status); | 
 | } | 
 |  | 
 | static int get_indirect_scom_form0(struct scom_device *scom, uint64_t *value, | 
 | 				   uint64_t addr, uint32_t *status) | 
 | { | 
 | 	uint64_t ind_data, ind_addr; | 
 | 	int rc, err; | 
 |  | 
 | 	ind_addr = addr & XSCOM_ADDR_DIRECT_PART; | 
 | 	ind_data = (addr & XSCOM_ADDR_INDIRECT_PART) | XSCOM_DATA_IND_READ; | 
 | 	rc = __put_scom(scom, ind_data, ind_addr, status); | 
 | 	if (rc || (*status & SCOM_STATUS_ANY_ERR)) | 
 | 		return rc; | 
 |  | 
 | 	rc = __get_scom(scom, &ind_data, addr, status); | 
 | 	if (rc || (*status & SCOM_STATUS_ANY_ERR)) | 
 | 		return rc; | 
 |  | 
 | 	err = (ind_data & XSCOM_DATA_IND_ERR_MASK) >> XSCOM_DATA_IND_ERR_SHIFT; | 
 | 	*status = err << SCOM_STATUS_PIB_RESP_SHIFT; | 
 | 	*value = ind_data & XSCOM_DATA_IND_DATA; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int raw_put_scom(struct scom_device *scom, uint64_t value, | 
 | 			uint64_t addr, uint32_t *status) | 
 | { | 
 | 	if (addr & XSCOM_ADDR_IND_FLAG) { | 
 | 		if (addr & XSCOM_ADDR_INF_FORM1) | 
 | 			return put_indirect_scom_form1(scom, value, addr, status); | 
 | 		else | 
 | 			return put_indirect_scom_form0(scom, value, addr, status); | 
 | 	} else | 
 | 		return __put_scom(scom, value, addr, status); | 
 | } | 
 |  | 
 | static int raw_get_scom(struct scom_device *scom, uint64_t *value, | 
 | 			uint64_t addr, uint32_t *status) | 
 | { | 
 | 	if (addr & XSCOM_ADDR_IND_FLAG) { | 
 | 		if (addr & XSCOM_ADDR_INF_FORM1) | 
 | 			return -ENXIO; | 
 | 		return get_indirect_scom_form0(scom, value, addr, status); | 
 | 	} else | 
 | 		return __get_scom(scom, value, addr, status); | 
 | } | 
 |  | 
 | static int handle_fsi2pib_status(struct scom_device *scom, uint32_t status) | 
 | { | 
 | 	uint32_t dummy = -1; | 
 |  | 
 | 	if (status & SCOM_STATUS_FSI2PIB_ERROR) | 
 | 		fsi_device_write(scom->fsi_dev, SCOM_FSI2PIB_RESET_REG, &dummy, | 
 | 				 sizeof(uint32_t)); | 
 |  | 
 | 	if (status & SCOM_STATUS_PROTECTION) | 
 | 		return -EPERM; | 
 | 	if (status & SCOM_STATUS_PARITY) | 
 | 		return -EIO; | 
 |  | 
 | 	if (status & SCOM_STATUS_PIB_ABORT) | 
 | 		return -EBUSY; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int handle_pib_status(struct scom_device *scom, uint8_t status) | 
 | { | 
 | 	uint32_t dummy = -1; | 
 |  | 
 | 	if (status == SCOM_PIB_SUCCESS) | 
 | 		return 0; | 
 | 	if (status == SCOM_PIB_BLOCKED) | 
 | 		return -EBUSY; | 
 |  | 
 | 	/* Reset the bridge */ | 
 | 	fsi_device_write(scom->fsi_dev, SCOM_FSI2PIB_RESET_REG, &dummy, | 
 | 			 sizeof(uint32_t)); | 
 |  | 
 | 	switch(status) { | 
 | 	case SCOM_PIB_OFFLINE: | 
 | 		return -ENODEV; | 
 | 	case SCOM_PIB_BAD_ADDR: | 
 | 		return -ENXIO; | 
 | 	case SCOM_PIB_TIMEOUT: | 
 | 		return -ETIMEDOUT; | 
 | 	case SCOM_PIB_PARTIAL: | 
 | 	case SCOM_PIB_CLK_ERR: | 
 | 	case SCOM_PIB_PARITY_ERR: | 
 | 	default: | 
 | 		return -EIO; | 
 | 	} | 
 | } | 
 |  | 
 | static int put_scom(struct scom_device *scom, uint64_t value, | 
 | 		    uint64_t addr) | 
 | { | 
 | 	uint32_t status; | 
 | 	int rc; | 
 |  | 
 | 	rc = raw_put_scom(scom, value, addr, &status); | 
 | 	if (rc) | 
 | 		return rc; | 
 |  | 
 | 	rc = handle_fsi2pib_status(scom, status); | 
 | 	if (rc) | 
 | 		return rc; | 
 |  | 
 | 	return handle_pib_status(scom, | 
 | 				 (status & SCOM_STATUS_PIB_RESP_MASK) | 
 | 				 >> SCOM_STATUS_PIB_RESP_SHIFT); | 
 | } | 
 |  | 
 | static int get_scom(struct scom_device *scom, uint64_t *value, | 
 | 		    uint64_t addr) | 
 | { | 
 | 	uint32_t status; | 
 | 	int rc; | 
 |  | 
 | 	rc = raw_get_scom(scom, value, addr, &status); | 
 | 	if (rc) | 
 | 		return rc; | 
 |  | 
 | 	rc = handle_fsi2pib_status(scom, status); | 
 | 	if (rc) | 
 | 		return rc; | 
 |  | 
 | 	return handle_pib_status(scom, | 
 | 				 (status & SCOM_STATUS_PIB_RESP_MASK) | 
 | 				 >> SCOM_STATUS_PIB_RESP_SHIFT); | 
 | } | 
 |  | 
 | static ssize_t scom_read(struct file *filep, char __user *buf, size_t len, | 
 | 			 loff_t *offset) | 
 | { | 
 | 	struct scom_device *scom = filep->private_data; | 
 | 	struct device *dev = &scom->fsi_dev->dev; | 
 | 	uint64_t val; | 
 | 	int rc; | 
 |  | 
 | 	if (len != sizeof(uint64_t)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	mutex_lock(&scom->lock); | 
 | 	if (scom->dead) | 
 | 		rc = -ENODEV; | 
 | 	else | 
 | 		rc = get_scom(scom, &val, *offset); | 
 | 	mutex_unlock(&scom->lock); | 
 | 	if (rc) { | 
 | 		dev_dbg(dev, "get_scom fail:%d\n", rc); | 
 | 		return rc; | 
 | 	} | 
 |  | 
 | 	rc = copy_to_user(buf, &val, len); | 
 | 	if (rc) | 
 | 		dev_dbg(dev, "copy to user failed:%d\n", rc); | 
 |  | 
 | 	return rc ? rc : len; | 
 | } | 
 |  | 
 | static ssize_t scom_write(struct file *filep, const char __user *buf, | 
 | 			  size_t len, loff_t *offset) | 
 | { | 
 | 	int rc; | 
 | 	struct scom_device *scom = filep->private_data; | 
 | 	struct device *dev = &scom->fsi_dev->dev; | 
 | 	uint64_t val; | 
 |  | 
 | 	if (len != sizeof(uint64_t)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	rc = copy_from_user(&val, buf, len); | 
 | 	if (rc) { | 
 | 		dev_dbg(dev, "copy from user failed:%d\n", rc); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	mutex_lock(&scom->lock); | 
 | 	if (scom->dead) | 
 | 		rc = -ENODEV; | 
 | 	else | 
 | 		rc = put_scom(scom, val, *offset); | 
 | 	mutex_unlock(&scom->lock); | 
 | 	if (rc) { | 
 | 		dev_dbg(dev, "put_scom failed with:%d\n", rc); | 
 | 		return rc; | 
 | 	} | 
 |  | 
 | 	return len; | 
 | } | 
 |  | 
 | static loff_t scom_llseek(struct file *file, loff_t offset, int whence) | 
 | { | 
 | 	switch (whence) { | 
 | 	case SEEK_CUR: | 
 | 		break; | 
 | 	case SEEK_SET: | 
 | 		file->f_pos = offset; | 
 | 		break; | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	return offset; | 
 | } | 
 |  | 
 | static void raw_convert_status(struct scom_access *acc, uint32_t status) | 
 | { | 
 | 	acc->pib_status = (status & SCOM_STATUS_PIB_RESP_MASK) >> | 
 | 		SCOM_STATUS_PIB_RESP_SHIFT; | 
 | 	acc->intf_errors = 0; | 
 |  | 
 | 	if (status & SCOM_STATUS_PROTECTION) | 
 | 		acc->intf_errors |= SCOM_INTF_ERR_PROTECTION; | 
 | 	else if (status & SCOM_STATUS_PARITY) | 
 | 		acc->intf_errors |= SCOM_INTF_ERR_PARITY; | 
 | 	else if (status & SCOM_STATUS_PIB_ABORT) | 
 | 		acc->intf_errors |= SCOM_INTF_ERR_ABORT; | 
 | 	else if (status & SCOM_STATUS_ERR_SUMMARY) | 
 | 		acc->intf_errors |= SCOM_INTF_ERR_UNKNOWN; | 
 | } | 
 |  | 
 | static int scom_raw_read(struct scom_device *scom, void __user *argp) | 
 | { | 
 | 	struct scom_access acc; | 
 | 	uint32_t status; | 
 | 	int rc; | 
 |  | 
 | 	if (copy_from_user(&acc, argp, sizeof(struct scom_access))) | 
 | 		return -EFAULT; | 
 |  | 
 | 	rc = raw_get_scom(scom, &acc.data, acc.addr, &status); | 
 | 	if (rc) | 
 | 		return rc; | 
 | 	raw_convert_status(&acc, status); | 
 | 	if (copy_to_user(argp, &acc, sizeof(struct scom_access))) | 
 | 		return -EFAULT; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int scom_raw_write(struct scom_device *scom, void __user *argp) | 
 | { | 
 | 	u64 prev_data, mask, data; | 
 | 	struct scom_access acc; | 
 | 	uint32_t status; | 
 | 	int rc; | 
 |  | 
 | 	if (copy_from_user(&acc, argp, sizeof(struct scom_access))) | 
 | 		return -EFAULT; | 
 |  | 
 | 	if (acc.mask) { | 
 | 		rc = raw_get_scom(scom, &prev_data, acc.addr, &status); | 
 | 		if (rc) | 
 | 			return rc; | 
 | 		if (status & SCOM_STATUS_ANY_ERR) | 
 | 			goto fail; | 
 | 		mask = acc.mask; | 
 | 	} else { | 
 | 		prev_data = mask = -1ull; | 
 | 	} | 
 | 	data = (prev_data & ~mask) | (acc.data & mask); | 
 | 	rc = raw_put_scom(scom, data, acc.addr, &status); | 
 | 	if (rc) | 
 | 		return rc; | 
 |  fail: | 
 | 	raw_convert_status(&acc, status); | 
 | 	if (copy_to_user(argp, &acc, sizeof(struct scom_access))) | 
 | 		return -EFAULT; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int scom_reset(struct scom_device *scom, void __user *argp) | 
 | { | 
 | 	uint32_t flags, dummy = -1; | 
 | 	int rc = 0; | 
 |  | 
 | 	if (get_user(flags, (__u32 __user *)argp)) | 
 | 		return -EFAULT; | 
 | 	if (flags & SCOM_RESET_PIB) | 
 | 		rc = fsi_device_write(scom->fsi_dev, SCOM_PIB_RESET_REG, &dummy, | 
 | 				      sizeof(uint32_t)); | 
 | 	if (!rc && (flags & (SCOM_RESET_PIB | SCOM_RESET_INTF))) | 
 | 		rc = fsi_device_write(scom->fsi_dev, SCOM_FSI2PIB_RESET_REG, &dummy, | 
 | 				      sizeof(uint32_t)); | 
 | 	return rc; | 
 | } | 
 |  | 
 | static int scom_check(struct scom_device *scom, void __user *argp) | 
 | { | 
 | 	/* Still need to find out how to get "protected" */ | 
 | 	return put_user(SCOM_CHECK_SUPPORTED, (__u32 __user *)argp); | 
 | } | 
 |  | 
 | static long scom_ioctl(struct file *file, unsigned int cmd, unsigned long arg) | 
 | { | 
 | 	struct scom_device *scom = file->private_data; | 
 | 	void __user *argp = (void __user *)arg; | 
 | 	int rc = -ENOTTY; | 
 |  | 
 | 	mutex_lock(&scom->lock); | 
 | 	if (scom->dead) { | 
 | 		mutex_unlock(&scom->lock); | 
 | 		return -ENODEV; | 
 | 	} | 
 | 	switch(cmd) { | 
 | 	case FSI_SCOM_CHECK: | 
 | 		rc = scom_check(scom, argp); | 
 | 		break; | 
 | 	case FSI_SCOM_READ: | 
 | 		rc = scom_raw_read(scom, argp); | 
 | 		break; | 
 | 	case FSI_SCOM_WRITE: | 
 | 		rc = scom_raw_write(scom, argp); | 
 | 		break; | 
 | 	case FSI_SCOM_RESET: | 
 | 		rc = scom_reset(scom, argp); | 
 | 		break; | 
 | 	} | 
 | 	mutex_unlock(&scom->lock); | 
 | 	return rc; | 
 | } | 
 |  | 
 | static int scom_open(struct inode *inode, struct file *file) | 
 | { | 
 | 	struct scom_device *scom = container_of(inode->i_cdev, struct scom_device, cdev); | 
 |  | 
 | 	file->private_data = scom; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct file_operations scom_fops = { | 
 | 	.owner		= THIS_MODULE, | 
 | 	.open		= scom_open, | 
 | 	.llseek		= scom_llseek, | 
 | 	.read		= scom_read, | 
 | 	.write		= scom_write, | 
 | 	.unlocked_ioctl	= scom_ioctl, | 
 | }; | 
 |  | 
 | static void scom_free(struct device *dev) | 
 | { | 
 | 	struct scom_device *scom = container_of(dev, struct scom_device, dev); | 
 |  | 
 | 	put_device(&scom->fsi_dev->dev); | 
 | 	kfree(scom); | 
 | } | 
 |  | 
 | static int scom_probe(struct device *dev) | 
 | { | 
 | 	struct fsi_device *fsi_dev = to_fsi_dev(dev); | 
 | 	struct scom_device *scom; | 
 | 	int rc, didx; | 
 |  | 
 | 	scom = kzalloc(sizeof(*scom), GFP_KERNEL); | 
 | 	if (!scom) | 
 | 		return -ENOMEM; | 
 | 	dev_set_drvdata(dev, scom); | 
 | 	mutex_init(&scom->lock); | 
 |  | 
 | 	/* Grab a reference to the device (parent of our cdev), we'll drop it later */ | 
 | 	if (!get_device(dev)) { | 
 | 		kfree(scom); | 
 | 		return -ENODEV; | 
 | 	} | 
 | 	scom->fsi_dev = fsi_dev; | 
 |  | 
 | 	/* Create chardev for userspace access */ | 
 | 	scom->dev.type = &fsi_cdev_type; | 
 | 	scom->dev.parent = dev; | 
 | 	scom->dev.release = scom_free; | 
 | 	device_initialize(&scom->dev); | 
 |  | 
 | 	/* Allocate a minor in the FSI space */ | 
 | 	rc = fsi_get_new_minor(fsi_dev, fsi_dev_scom, &scom->dev.devt, &didx); | 
 | 	if (rc) | 
 | 		goto err; | 
 |  | 
 | 	dev_set_name(&scom->dev, "scom%d", didx); | 
 | 	cdev_init(&scom->cdev, &scom_fops); | 
 | 	rc = cdev_device_add(&scom->cdev, &scom->dev); | 
 | 	if (rc) { | 
 | 		dev_err(dev, "Error %d creating char device %s\n", | 
 | 			rc, dev_name(&scom->dev)); | 
 | 		goto err_free_minor; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 |  err_free_minor: | 
 | 	fsi_free_minor(scom->dev.devt); | 
 |  err: | 
 | 	put_device(&scom->dev); | 
 | 	return rc; | 
 | } | 
 |  | 
 | static int scom_remove(struct device *dev) | 
 | { | 
 | 	struct scom_device *scom = dev_get_drvdata(dev); | 
 |  | 
 | 	mutex_lock(&scom->lock); | 
 | 	scom->dead = true; | 
 | 	mutex_unlock(&scom->lock); | 
 | 	cdev_device_del(&scom->cdev, &scom->dev); | 
 | 	fsi_free_minor(scom->dev.devt); | 
 | 	put_device(&scom->dev); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct fsi_device_id scom_ids[] = { | 
 | 	{ | 
 | 		.engine_type = FSI_ENGID_SCOM, | 
 | 		.version = FSI_VERSION_ANY, | 
 | 	}, | 
 | 	{ 0 } | 
 | }; | 
 |  | 
 | static struct fsi_driver scom_drv = { | 
 | 	.id_table = scom_ids, | 
 | 	.drv = { | 
 | 		.name = "scom", | 
 | 		.bus = &fsi_bus_type, | 
 | 		.probe = scom_probe, | 
 | 		.remove = scom_remove, | 
 | 	} | 
 | }; | 
 |  | 
 | static int scom_init(void) | 
 | { | 
 | 	return fsi_driver_register(&scom_drv); | 
 | } | 
 |  | 
 | static void scom_exit(void) | 
 | { | 
 | 	fsi_driver_unregister(&scom_drv); | 
 | } | 
 |  | 
 | module_init(scom_init); | 
 | module_exit(scom_exit); | 
 | MODULE_LICENSE("GPL"); |