| /* SPDX-License-Identifier: GPL-2.0 */ | |
| #ifndef __LINUX_COMPILER_H | |
| #define __LINUX_COMPILER_H | |
| #include <linux/compiler_types.h> | |
| #ifndef __ASSEMBLY__ | |
| #ifdef __KERNEL__ | |
| /* | |
| * Note: DISABLE_BRANCH_PROFILING can be used by special lowlevel code | |
| * to disable branch tracing on a per file basis. | |
| */ | |
| void ftrace_likely_update(struct ftrace_likely_data *f, int val, | |
| int expect, int is_constant); | |
| #if defined(CONFIG_TRACE_BRANCH_PROFILING) \ | |
| && !defined(DISABLE_BRANCH_PROFILING) && !defined(__CHECKER__) | |
| #define likely_notrace(x) __builtin_expect(!!(x), 1) | |
| #define unlikely_notrace(x) __builtin_expect(!!(x), 0) | |
| #define __branch_check__(x, expect, is_constant) ({ \ | |
| long ______r; \ | |
| static struct ftrace_likely_data \ | |
| __aligned(4) \ | |
| __section("_ftrace_annotated_branch") \ | |
| ______f = { \ | |
| .data.func = __func__, \ | |
| .data.file = __FILE__, \ | |
| .data.line = __LINE__, \ | |
| }; \ | |
| ______r = __builtin_expect(!!(x), expect); \ | |
| ftrace_likely_update(&______f, ______r, \ | |
| expect, is_constant); \ | |
| ______r; \ | |
| }) | |
| /* | |
| * Using __builtin_constant_p(x) to ignore cases where the return | |
| * value is always the same. This idea is taken from a similar patch | |
| * written by Daniel Walker. | |
| */ | |
| # ifndef likely | |
| # define likely(x) (__branch_check__(x, 1, __builtin_constant_p(x))) | |
| # endif | |
| # ifndef unlikely | |
| # define unlikely(x) (__branch_check__(x, 0, __builtin_constant_p(x))) | |
| # endif | |
| #ifdef CONFIG_PROFILE_ALL_BRANCHES | |
| /* | |
| * "Define 'is'", Bill Clinton | |
| * "Define 'if'", Steven Rostedt | |
| */ | |
| #define if(cond, ...) if ( __trace_if_var( !!(cond , ## __VA_ARGS__) ) ) | |
| #define __trace_if_var(cond) (__builtin_constant_p(cond) ? (cond) : __trace_if_value(cond)) | |
| #define __trace_if_value(cond) ({ \ | |
| static struct ftrace_branch_data \ | |
| __aligned(4) \ | |
| __section("_ftrace_branch") \ | |
| __if_trace = { \ | |
| .func = __func__, \ | |
| .file = __FILE__, \ | |
| .line = __LINE__, \ | |
| }; \ | |
| (cond) ? \ | |
| (__if_trace.miss_hit[1]++,1) : \ | |
| (__if_trace.miss_hit[0]++,0); \ | |
| }) | |
| #endif /* CONFIG_PROFILE_ALL_BRANCHES */ | |
| #else | |
| # define likely(x) __builtin_expect(!!(x), 1) | |
| # define unlikely(x) __builtin_expect(!!(x), 0) | |
| # define likely_notrace(x) likely(x) | |
| # define unlikely_notrace(x) unlikely(x) | |
| #endif | |
| /* Optimization barrier */ | |
| #ifndef barrier | |
| /* The "volatile" is due to gcc bugs */ | |
| # define barrier() __asm__ __volatile__("": : :"memory") | |
| #endif | |
| #ifndef barrier_data | |
| /* | |
| * This version is i.e. to prevent dead stores elimination on @ptr | |
| * where gcc and llvm may behave differently when otherwise using | |
| * normal barrier(): while gcc behavior gets along with a normal | |
| * barrier(), llvm needs an explicit input variable to be assumed | |
| * clobbered. The issue is as follows: while the inline asm might | |
| * access any memory it wants, the compiler could have fit all of | |
| * @ptr into memory registers instead, and since @ptr never escaped | |
| * from that, it proved that the inline asm wasn't touching any of | |
| * it. This version works well with both compilers, i.e. we're telling | |
| * the compiler that the inline asm absolutely may see the contents | |
| * of @ptr. See also: https://llvm.org/bugs/show_bug.cgi?id=15495 | |
| */ | |
| # define barrier_data(ptr) __asm__ __volatile__("": :"r"(ptr) :"memory") | |
| #endif | |
| /* workaround for GCC PR82365 if needed */ | |
| #ifndef barrier_before_unreachable | |
| # define barrier_before_unreachable() do { } while (0) | |
| #endif | |
| /* Unreachable code */ | |
| #ifdef CONFIG_OBJTOOL | |
| /* Annotate a C jump table to allow objtool to follow the code flow */ | |
| #define __annotate_jump_table __section(".data.rel.ro.c_jump_table") | |
| #else /* !CONFIG_OBJTOOL */ | |
| #define __annotate_jump_table | |
| #endif /* CONFIG_OBJTOOL */ | |
| /* | |
| * Mark a position in code as unreachable. This can be used to | |
| * suppress control flow warnings after asm blocks that transfer | |
| * control elsewhere. | |
| */ | |
| #define unreachable() do { \ | |
| barrier_before_unreachable(); \ | |
| __builtin_unreachable(); \ | |
| } while (0) | |
| /* | |
| * KENTRY - kernel entry point | |
| * This can be used to annotate symbols (functions or data) that are used | |
| * without their linker symbol being referenced explicitly. For example, | |
| * interrupt vector handlers, or functions in the kernel image that are found | |
| * programatically. | |
| * | |
| * Not required for symbols exported with EXPORT_SYMBOL, or initcalls. Those | |
| * are handled in their own way (with KEEP() in linker scripts). | |
| * | |
| * KENTRY can be avoided if the symbols in question are marked as KEEP() in the | |
| * linker script. For example an architecture could KEEP() its entire | |
| * boot/exception vector code rather than annotate each function and data. | |
| */ | |
| #ifndef KENTRY | |
| # define KENTRY(sym) \ | |
| extern typeof(sym) sym; \ | |
| static const unsigned long __kentry_##sym \ | |
| __used \ | |
| __attribute__((__section__("___kentry+" #sym))) \ | |
| = (unsigned long)&sym; | |
| #endif | |
| #ifndef RELOC_HIDE | |
| # define RELOC_HIDE(ptr, off) \ | |
| ({ unsigned long __ptr; \ | |
| __ptr = (unsigned long) (ptr); \ | |
| (typeof(ptr)) (__ptr + (off)); }) | |
| #endif | |
| #define absolute_pointer(val) RELOC_HIDE((void *)(val), 0) | |
| #ifndef OPTIMIZER_HIDE_VAR | |
| /* Make the optimizer believe the variable can be manipulated arbitrarily. */ | |
| #define OPTIMIZER_HIDE_VAR(var) \ | |
| __asm__ ("" : "=r" (var) : "0" (var)) | |
| #endif | |
| #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__) | |
| /** | |
| * data_race - mark an expression as containing intentional data races | |
| * | |
| * This data_race() macro is useful for situations in which data races | |
| * should be forgiven. One example is diagnostic code that accesses | |
| * shared variables but is not a part of the core synchronization design. | |
| * For example, if accesses to a given variable are protected by a lock, | |
| * except for diagnostic code, then the accesses under the lock should | |
| * be plain C-language accesses and those in the diagnostic code should | |
| * use data_race(). This way, KCSAN will complain if buggy lockless | |
| * accesses to that variable are introduced, even if the buggy accesses | |
| * are protected by READ_ONCE() or WRITE_ONCE(). | |
| * | |
| * This macro *does not* affect normal code generation, but is a hint | |
| * to tooling that data races here are to be ignored. If the access must | |
| * be atomic *and* KCSAN should ignore the access, use both data_race() | |
| * and READ_ONCE(), for example, data_race(READ_ONCE(x)). | |
| */ | |
| #define data_race(expr) \ | |
| ({ \ | |
| __kcsan_disable_current(); \ | |
| __auto_type __v = (expr); \ | |
| __kcsan_enable_current(); \ | |
| __v; \ | |
| }) | |
| #endif /* __KERNEL__ */ | |
| /** | |
| * offset_to_ptr - convert a relative memory offset to an absolute pointer | |
| * @off: the address of the 32-bit offset value | |
| */ | |
| static inline void *offset_to_ptr(const int *off) | |
| { | |
| return (void *)((unsigned long)off + *off); | |
| } | |
| #endif /* __ASSEMBLY__ */ | |
| #ifdef CONFIG_64BIT | |
| #define ARCH_SEL(a,b) a | |
| #else | |
| #define ARCH_SEL(a,b) b | |
| #endif | |
| /* | |
| * Force the compiler to emit 'sym' as a symbol, so that we can reference | |
| * it from inline assembler. Necessary in case 'sym' could be inlined | |
| * otherwise, or eliminated entirely due to lack of references that are | |
| * visible to the compiler. | |
| */ | |
| #define ___ADDRESSABLE(sym, __attrs) \ | |
| static void * __used __attrs \ | |
| __UNIQUE_ID(__PASTE(__addressable_,sym)) = (void *)(uintptr_t)&sym; | |
| #define __ADDRESSABLE(sym) \ | |
| ___ADDRESSABLE(sym, __section(".discard.addressable")) | |
| /* &a[0] degrades to a pointer: a different type from an array */ | |
| #define __must_be_array(a) BUILD_BUG_ON_ZERO(__same_type((a), &(a)[0])) | |
| /* Require C Strings (i.e. NUL-terminated) lack the "nonstring" attribute. */ | |
| #define __must_be_cstr(p) BUILD_BUG_ON_ZERO(__annotated(p, nonstring)) | |
| /* | |
| * This returns a constant expression while determining if an argument is | |
| * a constant expression, most importantly without evaluating the argument. | |
| * Glory to Martin Uecker <Martin.Uecker@med.uni-goettingen.de> | |
| * | |
| * Details: | |
| * - sizeof() return an integer constant expression, and does not evaluate | |
| * the value of its operand; it only examines the type of its operand. | |
| * - The results of comparing two integer constant expressions is also | |
| * an integer constant expression. | |
| * - The first literal "8" isn't important. It could be any literal value. | |
| * - The second literal "8" is to avoid warnings about unaligned pointers; | |
| * this could otherwise just be "1". | |
| * - (long)(x) is used to avoid warnings about 64-bit types on 32-bit | |
| * architectures. | |
| * - The C Standard defines "null pointer constant", "(void *)0", as | |
| * distinct from other void pointers. | |
| * - If (x) is an integer constant expression, then the "* 0l" resolves | |
| * it into an integer constant expression of value 0. Since it is cast to | |
| * "void *", this makes the second operand a null pointer constant. | |
| * - If (x) is not an integer constant expression, then the second operand | |
| * resolves to a void pointer (but not a null pointer constant: the value | |
| * is not an integer constant 0). | |
| * - The conditional operator's third operand, "(int *)8", is an object | |
| * pointer (to type "int"). | |
| * - The behavior (including the return type) of the conditional operator | |
| * ("operand1 ? operand2 : operand3") depends on the kind of expressions | |
| * given for the second and third operands. This is the central mechanism | |
| * of the macro: | |
| * - When one operand is a null pointer constant (i.e. when x is an integer | |
| * constant expression) and the other is an object pointer (i.e. our | |
| * third operand), the conditional operator returns the type of the | |
| * object pointer operand (i.e. "int *"). Here, within the sizeof(), we | |
| * would then get: | |
| * sizeof(*((int *)(...)) == sizeof(int) == 4 | |
| * - When one operand is a void pointer (i.e. when x is not an integer | |
| * constant expression) and the other is an object pointer (i.e. our | |
| * third operand), the conditional operator returns a "void *" type. | |
| * Here, within the sizeof(), we would then get: | |
| * sizeof(*((void *)(...)) == sizeof(void) == 1 | |
| * - The equality comparison to "sizeof(int)" therefore depends on (x): | |
| * sizeof(int) == sizeof(int) (x) was a constant expression | |
| * sizeof(int) != sizeof(void) (x) was not a constant expression | |
| */ | |
| #define __is_constexpr(x) \ | |
| (sizeof(int) == sizeof(*(8 ? ((void *)((long)(x) * 0l)) : (int *)8))) | |
| /* | |
| * Whether 'type' is a signed type or an unsigned type. Supports scalar types, | |
| * bool and also pointer types. | |
| */ | |
| #define is_signed_type(type) (((type)(-1)) < (__force type)1) | |
| #define is_unsigned_type(type) (!is_signed_type(type)) | |
| /* | |
| * Useful shorthand for "is this condition known at compile-time?" | |
| * | |
| * Note that the condition may involve non-constant values, | |
| * but the compiler may know enough about the details of the | |
| * values to determine that the condition is statically true. | |
| */ | |
| #define statically_true(x) (__builtin_constant_p(x) && (x)) | |
| /* | |
| * This is needed in functions which generate the stack canary, see | |
| * arch/x86/kernel/smpboot.c::start_secondary() for an example. | |
| */ | |
| #define prevent_tail_call_optimization() mb() | |
| #include <asm/rwonce.h> | |
| #endif /* __LINUX_COMPILER_H */ |