| /* SPDX-License-Identifier: BSD-3-Clause */ | |
| /* | |
| * Virtio Mem Device | |
| * | |
| * Copyright Red Hat, Inc. 2020 | |
| * | |
| * Authors: | |
| * David Hildenbrand <david@redhat.com> | |
| * | |
| * This header is BSD licensed so anyone can use the definitions | |
| * to implement compatible drivers/servers: | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions | |
| * are met: | |
| * 1. Redistributions of source code must retain the above copyright | |
| * notice, this list of conditions and the following disclaimer. | |
| * 2. Redistributions in binary form must reproduce the above copyright | |
| * notice, this list of conditions and the following disclaimer in the | |
| * documentation and/or other materials provided with the distribution. | |
| * 3. Neither the name of IBM nor the names of its contributors | |
| * may be used to endorse or promote products derived from this software | |
| * without specific prior written permission. | |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | |
| * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS | |
| * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL IBM OR | |
| * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, | |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT | |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF | |
| * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND | |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, | |
| * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT | |
| * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF | |
| * SUCH DAMAGE. | |
| */ | |
| #ifndef _LINUX_VIRTIO_MEM_H | |
| #define _LINUX_VIRTIO_MEM_H | |
| #include <linux/types.h> | |
| #include <linux/virtio_types.h> | |
| #include <linux/virtio_ids.h> | |
| #include <linux/virtio_config.h> | |
| /* | |
| * Each virtio-mem device manages a dedicated region in physical address | |
| * space. Each device can belong to a single NUMA node, multiple devices | |
| * for a single NUMA node are possible. A virtio-mem device is like a | |
| * "resizable DIMM" consisting of small memory blocks that can be plugged | |
| * or unplugged. The device driver is responsible for (un)plugging memory | |
| * blocks on demand. | |
| * | |
| * Virtio-mem devices can only operate on their assigned memory region in | |
| * order to (un)plug memory. A device cannot (un)plug memory belonging to | |
| * other devices. | |
| * | |
| * The "region_size" corresponds to the maximum amount of memory that can | |
| * be provided by a device. The "size" corresponds to the amount of memory | |
| * that is currently plugged. "requested_size" corresponds to a request | |
| * from the device to the device driver to (un)plug blocks. The | |
| * device driver should try to (un)plug blocks in order to reach the | |
| * "requested_size". It is impossible to plug more memory than requested. | |
| * | |
| * The "usable_region_size" represents the memory region that can actually | |
| * be used to (un)plug memory. It is always at least as big as the | |
| * "requested_size" and will grow dynamically. It will only shrink when | |
| * explicitly triggered (VIRTIO_MEM_REQ_UNPLUG). | |
| * | |
| * There are no guarantees what will happen if unplugged memory is | |
| * read/written. In general, unplugged memory should not be touched, because | |
| * the resulting action is undefined. There is one exception: without | |
| * VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE, unplugged memory inside the usable | |
| * region can be read, to simplify creation of memory dumps. | |
| * | |
| * It can happen that the device cannot process a request, because it is | |
| * busy. The device driver has to retry later. | |
| * | |
| * Usually, during system resets all memory will get unplugged, so the | |
| * device driver can start with a clean state. However, in specific | |
| * scenarios (if the device is busy) it can happen that the device still | |
| * has memory plugged. The device driver can request to unplug all memory | |
| * (VIRTIO_MEM_REQ_UNPLUG) - which might take a while to succeed if the | |
| * device is busy. | |
| */ | |
| /* --- virtio-mem: feature bits --- */ | |
| /* node_id is an ACPI PXM and is valid */ | |
| #define VIRTIO_MEM_F_ACPI_PXM 0 | |
| /* unplugged memory must not be accessed */ | |
| #define VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE 1 | |
| /* --- virtio-mem: guest -> host requests --- */ | |
| /* request to plug memory blocks */ | |
| #define VIRTIO_MEM_REQ_PLUG 0 | |
| /* request to unplug memory blocks */ | |
| #define VIRTIO_MEM_REQ_UNPLUG 1 | |
| /* request to unplug all blocks and shrink the usable size */ | |
| #define VIRTIO_MEM_REQ_UNPLUG_ALL 2 | |
| /* request information about the plugged state of memory blocks */ | |
| #define VIRTIO_MEM_REQ_STATE 3 | |
| struct virtio_mem_req_plug { | |
| __virtio64 addr; | |
| __virtio16 nb_blocks; | |
| __virtio16 padding[3]; | |
| }; | |
| struct virtio_mem_req_unplug { | |
| __virtio64 addr; | |
| __virtio16 nb_blocks; | |
| __virtio16 padding[3]; | |
| }; | |
| struct virtio_mem_req_state { | |
| __virtio64 addr; | |
| __virtio16 nb_blocks; | |
| __virtio16 padding[3]; | |
| }; | |
| struct virtio_mem_req { | |
| __virtio16 type; | |
| __virtio16 padding[3]; | |
| union { | |
| struct virtio_mem_req_plug plug; | |
| struct virtio_mem_req_unplug unplug; | |
| struct virtio_mem_req_state state; | |
| } u; | |
| }; | |
| /* --- virtio-mem: host -> guest response --- */ | |
| /* | |
| * Request processed successfully, applicable for | |
| * - VIRTIO_MEM_REQ_PLUG | |
| * - VIRTIO_MEM_REQ_UNPLUG | |
| * - VIRTIO_MEM_REQ_UNPLUG_ALL | |
| * - VIRTIO_MEM_REQ_STATE | |
| */ | |
| #define VIRTIO_MEM_RESP_ACK 0 | |
| /* | |
| * Request denied - e.g. trying to plug more than requested, applicable for | |
| * - VIRTIO_MEM_REQ_PLUG | |
| */ | |
| #define VIRTIO_MEM_RESP_NACK 1 | |
| /* | |
| * Request cannot be processed right now, try again later, applicable for | |
| * - VIRTIO_MEM_REQ_PLUG | |
| * - VIRTIO_MEM_REQ_UNPLUG | |
| * - VIRTIO_MEM_REQ_UNPLUG_ALL | |
| */ | |
| #define VIRTIO_MEM_RESP_BUSY 2 | |
| /* | |
| * Error in request (e.g. addresses/alignment), applicable for | |
| * - VIRTIO_MEM_REQ_PLUG | |
| * - VIRTIO_MEM_REQ_UNPLUG | |
| * - VIRTIO_MEM_REQ_STATE | |
| */ | |
| #define VIRTIO_MEM_RESP_ERROR 3 | |
| /* State of memory blocks is "plugged" */ | |
| #define VIRTIO_MEM_STATE_PLUGGED 0 | |
| /* State of memory blocks is "unplugged" */ | |
| #define VIRTIO_MEM_STATE_UNPLUGGED 1 | |
| /* State of memory blocks is "mixed" */ | |
| #define VIRTIO_MEM_STATE_MIXED 2 | |
| struct virtio_mem_resp_state { | |
| __virtio16 state; | |
| }; | |
| struct virtio_mem_resp { | |
| __virtio16 type; | |
| __virtio16 padding[3]; | |
| union { | |
| struct virtio_mem_resp_state state; | |
| } u; | |
| }; | |
| /* --- virtio-mem: configuration --- */ | |
| struct virtio_mem_config { | |
| /* Block size and alignment. Cannot change. */ | |
| __le64 block_size; | |
| /* Valid with VIRTIO_MEM_F_ACPI_PXM. Cannot change. */ | |
| __le16 node_id; | |
| __u8 padding[6]; | |
| /* Start address of the memory region. Cannot change. */ | |
| __le64 addr; | |
| /* Region size (maximum). Cannot change. */ | |
| __le64 region_size; | |
| /* | |
| * Currently usable region size. Can grow up to region_size. Can | |
| * shrink due to VIRTIO_MEM_REQ_UNPLUG_ALL (in which case no config | |
| * update will be sent). | |
| */ | |
| __le64 usable_region_size; | |
| /* | |
| * Currently used size. Changes due to plug/unplug requests, but no | |
| * config updates will be sent. | |
| */ | |
| __le64 plugged_size; | |
| /* Requested size. New plug requests cannot exceed it. Can change. */ | |
| __le64 requested_size; | |
| }; | |
| #endif /* _LINUX_VIRTIO_MEM_H */ |