| // SPDX-License-Identifier: GPL-2.0-only | 
 | /* | 
 |  *  74Hx164 - Generic serial-in/parallel-out 8-bits shift register GPIO driver | 
 |  * | 
 |  *  Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org> | 
 |  *  Copyright (C) 2010 Miguel Gaio <miguel.gaio@efixo.com> | 
 |  */ | 
 |  | 
 | #include <linux/bitops.h> | 
 | #include <linux/gpio/consumer.h> | 
 | #include <linux/gpio/driver.h> | 
 | #include <linux/module.h> | 
 | #include <linux/mutex.h> | 
 | #include <linux/property.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/spi/spi.h> | 
 |  | 
 | #define GEN_74X164_NUMBER_GPIOS	8 | 
 |  | 
 | struct gen_74x164_chip { | 
 | 	struct gpio_chip	gpio_chip; | 
 | 	struct mutex		lock; | 
 | 	struct gpio_desc	*gpiod_oe; | 
 | 	u32			registers; | 
 | 	/* | 
 | 	 * Since the registers are chained, every byte sent will make | 
 | 	 * the previous byte shift to the next register in the | 
 | 	 * chain. Thus, the first byte sent will end up in the last | 
 | 	 * register at the end of the transfer. So, to have a logical | 
 | 	 * numbering, store the bytes in reverse order. | 
 | 	 */ | 
 | 	u8			buffer[]; | 
 | }; | 
 |  | 
 | static int __gen_74x164_write_config(struct gen_74x164_chip *chip) | 
 | { | 
 | 	return spi_write(to_spi_device(chip->gpio_chip.parent), chip->buffer, | 
 | 			 chip->registers); | 
 | } | 
 |  | 
 | static int gen_74x164_get_value(struct gpio_chip *gc, unsigned offset) | 
 | { | 
 | 	struct gen_74x164_chip *chip = gpiochip_get_data(gc); | 
 | 	u8 bank = chip->registers - 1 - offset / 8; | 
 | 	u8 pin = offset % 8; | 
 | 	int ret; | 
 |  | 
 | 	mutex_lock(&chip->lock); | 
 | 	ret = (chip->buffer[bank] >> pin) & 0x1; | 
 | 	mutex_unlock(&chip->lock); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void gen_74x164_set_value(struct gpio_chip *gc, | 
 | 		unsigned offset, int val) | 
 | { | 
 | 	struct gen_74x164_chip *chip = gpiochip_get_data(gc); | 
 | 	u8 bank = chip->registers - 1 - offset / 8; | 
 | 	u8 pin = offset % 8; | 
 |  | 
 | 	mutex_lock(&chip->lock); | 
 | 	if (val) | 
 | 		chip->buffer[bank] |= (1 << pin); | 
 | 	else | 
 | 		chip->buffer[bank] &= ~(1 << pin); | 
 |  | 
 | 	__gen_74x164_write_config(chip); | 
 | 	mutex_unlock(&chip->lock); | 
 | } | 
 |  | 
 | static void gen_74x164_set_multiple(struct gpio_chip *gc, unsigned long *mask, | 
 | 				    unsigned long *bits) | 
 | { | 
 | 	struct gen_74x164_chip *chip = gpiochip_get_data(gc); | 
 | 	unsigned long offset; | 
 | 	unsigned long bankmask; | 
 | 	size_t bank; | 
 | 	unsigned long bitmask; | 
 |  | 
 | 	mutex_lock(&chip->lock); | 
 | 	for_each_set_clump8(offset, bankmask, mask, chip->registers * 8) { | 
 | 		bank = chip->registers - 1 - offset / 8; | 
 | 		bitmask = bitmap_get_value8(bits, offset) & bankmask; | 
 |  | 
 | 		chip->buffer[bank] &= ~bankmask; | 
 | 		chip->buffer[bank] |= bitmask; | 
 | 	} | 
 | 	__gen_74x164_write_config(chip); | 
 | 	mutex_unlock(&chip->lock); | 
 | } | 
 |  | 
 | static int gen_74x164_direction_output(struct gpio_chip *gc, | 
 | 		unsigned offset, int val) | 
 | { | 
 | 	gen_74x164_set_value(gc, offset, val); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int gen_74x164_probe(struct spi_device *spi) | 
 | { | 
 | 	struct gen_74x164_chip *chip; | 
 | 	u32 nregs; | 
 | 	int ret; | 
 |  | 
 | 	/* | 
 | 	 * bits_per_word cannot be configured in platform data | 
 | 	 */ | 
 | 	spi->bits_per_word = 8; | 
 |  | 
 | 	ret = spi_setup(spi); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	ret = device_property_read_u32(&spi->dev, "registers-number", &nregs); | 
 | 	if (ret) { | 
 | 		dev_err(&spi->dev, "Missing 'registers-number' property.\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	chip = devm_kzalloc(&spi->dev, sizeof(*chip) + nregs, GFP_KERNEL); | 
 | 	if (!chip) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	chip->gpiod_oe = devm_gpiod_get_optional(&spi->dev, "enable", | 
 | 						 GPIOD_OUT_LOW); | 
 | 	if (IS_ERR(chip->gpiod_oe)) | 
 | 		return PTR_ERR(chip->gpiod_oe); | 
 |  | 
 | 	gpiod_set_value_cansleep(chip->gpiod_oe, 1); | 
 |  | 
 | 	spi_set_drvdata(spi, chip); | 
 |  | 
 | 	chip->gpio_chip.label = spi->modalias; | 
 | 	chip->gpio_chip.direction_output = gen_74x164_direction_output; | 
 | 	chip->gpio_chip.get = gen_74x164_get_value; | 
 | 	chip->gpio_chip.set = gen_74x164_set_value; | 
 | 	chip->gpio_chip.set_multiple = gen_74x164_set_multiple; | 
 | 	chip->gpio_chip.base = -1; | 
 |  | 
 | 	chip->registers = nregs; | 
 | 	chip->gpio_chip.ngpio = GEN_74X164_NUMBER_GPIOS * chip->registers; | 
 |  | 
 | 	chip->gpio_chip.can_sleep = true; | 
 | 	chip->gpio_chip.parent = &spi->dev; | 
 | 	chip->gpio_chip.owner = THIS_MODULE; | 
 |  | 
 | 	mutex_init(&chip->lock); | 
 |  | 
 | 	ret = __gen_74x164_write_config(chip); | 
 | 	if (ret) { | 
 | 		dev_err(&spi->dev, "Failed writing: %d\n", ret); | 
 | 		goto exit_destroy; | 
 | 	} | 
 |  | 
 | 	ret = gpiochip_add_data(&chip->gpio_chip, chip); | 
 | 	if (!ret) | 
 | 		return 0; | 
 |  | 
 | exit_destroy: | 
 | 	mutex_destroy(&chip->lock); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int gen_74x164_remove(struct spi_device *spi) | 
 | { | 
 | 	struct gen_74x164_chip *chip = spi_get_drvdata(spi); | 
 |  | 
 | 	gpiod_set_value_cansleep(chip->gpiod_oe, 0); | 
 | 	gpiochip_remove(&chip->gpio_chip); | 
 | 	mutex_destroy(&chip->lock); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct of_device_id gen_74x164_dt_ids[] = { | 
 | 	{ .compatible = "fairchild,74hc595" }, | 
 | 	{ .compatible = "nxp,74lvc594" }, | 
 | 	{}, | 
 | }; | 
 | MODULE_DEVICE_TABLE(of, gen_74x164_dt_ids); | 
 |  | 
 | static struct spi_driver gen_74x164_driver = { | 
 | 	.driver = { | 
 | 		.name		= "74x164", | 
 | 		.of_match_table	= gen_74x164_dt_ids, | 
 | 	}, | 
 | 	.probe		= gen_74x164_probe, | 
 | 	.remove		= gen_74x164_remove, | 
 | }; | 
 | module_spi_driver(gen_74x164_driver); | 
 |  | 
 | MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>"); | 
 | MODULE_AUTHOR("Miguel Gaio <miguel.gaio@efixo.com>"); | 
 | MODULE_DESCRIPTION("GPIO expander driver for 74X164 8-bits shift register"); | 
 | MODULE_LICENSE("GPL v2"); |