Merge branch 'akpm' (patches from Andrew)
Merge slub bulk allocator updates from Andrew Morton:
"This missed the merge window because I was waiting for some repairs to
come in. Nothing actually uses the bulk allocator yet and the changes
to other code paths are pretty small. And the net guys are waiting
for this so they can start merging the client code"
More comments from Jesper Dangaard Brouer:
"The kmem_cache_alloc_bulk() call, in mm/slub.c, were included in
previous kernel. The present version contains a bug. Vladimir
Davydov noticed it contained a bug, when kernel is compiled with
CONFIG_MEMCG_KMEM (see commit 03ec0ed57ffc: "slub: fix kmem cgroup
bug in kmem_cache_alloc_bulk"). Plus the mem cgroup counterpart in
kmem_cache_free_bulk() were missing (see commit 033745189b1b "slub:
add missing kmem cgroup support to kmem_cache_free_bulk").
I don't consider the fix stable-material because there are no in-tree
users of the API.
But with known bugs (for memcg) I cannot start using the API in the
net-tree"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
slab/slub: adjust kmem_cache_alloc_bulk API
slub: add missing kmem cgroup support to kmem_cache_free_bulk
slub: fix kmem cgroup bug in kmem_cache_alloc_bulk
slub: optimize bulk slowpath free by detached freelist
slub: support for bulk free with SLUB freelists
diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801
index 6a4b1af..1bba38d 100644
--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -32,6 +32,7 @@
* Intel Sunrise Point-LP (PCH)
* Intel DNV (SOC)
* Intel Broxton (SOC)
+ * Intel Lewisburg (PCH)
Datasheets: Publicly available at the Intel website
On Intel Patsburg and later chipsets, both the normal host SMBus controller
diff --git a/MAINTAINERS b/MAINTAINERS
index bab1b03..050d0e7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2449,7 +2449,9 @@
BROADCOM STB NAND FLASH DRIVER
M: Brian Norris <computersforpeace@gmail.com>
+M: Kamal Dasu <kdasu.kdev@gmail.com>
L: linux-mtd@lists.infradead.org
+L: bcm-kernel-feedback-list@broadcom.com
S: Maintained
F: drivers/mtd/nand/brcmnand/
@@ -2929,10 +2931,9 @@
F: drivers/platform/x86/compal-laptop.c
CONEXANT ACCESSRUNNER USB DRIVER
-M: Simon Arlott <cxacru@fire.lp0.eu>
L: accessrunner-general@lists.sourceforge.net
W: http://accessrunner.sourceforge.net/
-S: Maintained
+S: Orphan
F: drivers/usb/atm/cxacru.c
CONFIGFS
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index feb9d34b..f818ea4 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -486,7 +486,10 @@
compatible = "fsl,imx27-usb";
reg = <0x10024000 0x200>;
interrupts = <56>;
- clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
+ clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
+ <&clks IMX27_CLK_USB_AHB_GATE>,
+ <&clks IMX27_CLK_USB_DIV>;
+ clock-names = "ipg", "ahb", "per";
fsl,usbmisc = <&usbmisc 0>;
status = "disabled";
};
@@ -495,7 +498,10 @@
compatible = "fsl,imx27-usb";
reg = <0x10024200 0x200>;
interrupts = <54>;
- clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
+ clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
+ <&clks IMX27_CLK_USB_AHB_GATE>,
+ <&clks IMX27_CLK_USB_DIV>;
+ clock-names = "ipg", "ahb", "per";
fsl,usbmisc = <&usbmisc 1>;
dr_mode = "host";
status = "disabled";
@@ -505,7 +511,10 @@
compatible = "fsl,imx27-usb";
reg = <0x10024400 0x200>;
interrupts = <55>;
- clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
+ clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
+ <&clks IMX27_CLK_USB_AHB_GATE>,
+ <&clks IMX27_CLK_USB_DIV>;
+ clock-names = "ipg", "ahb", "per";
fsl,usbmisc = <&usbmisc 2>;
dr_mode = "host";
status = "disabled";
@@ -515,7 +524,6 @@
#index-cells = <1>;
compatible = "fsl,imx27-usbmisc";
reg = <0x10024600 0x200>;
- clocks = <&clks IMX27_CLK_USB_AHB_GATE>;
};
sahara2: sahara@10025000 {
diff --git a/arch/mips/ath79/setup.c b/arch/mips/ath79/setup.c
index 1ba2120..8755d61 100644
--- a/arch/mips/ath79/setup.c
+++ b/arch/mips/ath79/setup.c
@@ -216,9 +216,9 @@
AR71XX_RESET_SIZE);
ath79_pll_base = ioremap_nocache(AR71XX_PLL_BASE,
AR71XX_PLL_SIZE);
+ ath79_detect_sys_type();
ath79_ddr_ctrl_init();
- ath79_detect_sys_type();
if (mips_machtype != ATH79_MACH_GENERIC_OF)
detect_memory_region(0, ATH79_MEM_SIZE_MIN, ATH79_MEM_SIZE_MAX);
@@ -281,3 +281,8 @@
"Generic",
"Generic AR71XX/AR724X/AR913X based board",
ath79_generic_init);
+
+MIPS_MACHINE(ATH79_MACH_GENERIC_OF,
+ "DTB",
+ "Generic AR71XX/AR724X/AR913X based board (DT)",
+ NULL);
diff --git a/arch/mips/boot/dts/qca/ar9132.dtsi b/arch/mips/boot/dts/qca/ar9132.dtsi
index fb7734e..13d0439 100644
--- a/arch/mips/boot/dts/qca/ar9132.dtsi
+++ b/arch/mips/boot/dts/qca/ar9132.dtsi
@@ -107,7 +107,7 @@
miscintc: interrupt-controller@18060010 {
compatible = "qca,ar9132-misc-intc",
"qca,ar7100-misc-intc";
- reg = <0x18060010 0x4>;
+ reg = <0x18060010 0x8>;
interrupt-parent = <&cpuintc>;
interrupts = <6>;
diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h
index ad1fccd..2046c02 100644
--- a/arch/mips/include/asm/page.h
+++ b/arch/mips/include/asm/page.h
@@ -200,8 +200,9 @@
{
/* avoid <linux/mm.h> include hell */
extern unsigned long max_mapnr;
+ unsigned long pfn_offset = ARCH_PFN_OFFSET;
- return pfn >= ARCH_PFN_OFFSET && pfn < max_mapnr;
+ return pfn >= pfn_offset && pfn < max_mapnr;
}
#elif defined(CONFIG_SPARSEMEM)
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index c365469..729f891 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -108,6 +108,9 @@
default 3 if 64BIT && PARISC_PAGE_SIZE_4KB
default 2
+config SYS_SUPPORTS_HUGETLBFS
+ def_bool y if PA20
+
source "init/Kconfig"
source "kernel/Kconfig.freezer"
diff --git a/arch/parisc/include/asm/hugetlb.h b/arch/parisc/include/asm/hugetlb.h
new file mode 100644
index 0000000..7d56a9c
--- /dev/null
+++ b/arch/parisc/include/asm/hugetlb.h
@@ -0,0 +1,85 @@
+#ifndef _ASM_PARISC64_HUGETLB_H
+#define _ASM_PARISC64_HUGETLB_H
+
+#include <asm/page.h>
+#include <asm-generic/hugetlb.h>
+
+
+void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep, pte_t pte);
+
+pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep);
+
+static inline int is_hugepage_only_range(struct mm_struct *mm,
+ unsigned long addr,
+ unsigned long len) {
+ return 0;
+}
+
+/*
+ * If the arch doesn't supply something else, assume that hugepage
+ * size aligned regions are ok without further preparation.
+ */
+static inline int prepare_hugepage_range(struct file *file,
+ unsigned long addr, unsigned long len)
+{
+ if (len & ~HPAGE_MASK)
+ return -EINVAL;
+ if (addr & ~HPAGE_MASK)
+ return -EINVAL;
+ return 0;
+}
+
+static inline void hugetlb_free_pgd_range(struct mmu_gather *tlb,
+ unsigned long addr, unsigned long end,
+ unsigned long floor,
+ unsigned long ceiling)
+{
+ free_pgd_range(tlb, addr, end, floor, ceiling);
+}
+
+static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
+ unsigned long addr, pte_t *ptep)
+{
+}
+
+static inline int huge_pte_none(pte_t pte)
+{
+ return pte_none(pte);
+}
+
+static inline pte_t huge_pte_wrprotect(pte_t pte)
+{
+ return pte_wrprotect(pte);
+}
+
+static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
+ unsigned long addr, pte_t *ptep)
+{
+ pte_t old_pte = *ptep;
+ set_huge_pte_at(mm, addr, ptep, pte_wrprotect(old_pte));
+}
+
+static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma,
+ unsigned long addr, pte_t *ptep,
+ pte_t pte, int dirty)
+{
+ int changed = !pte_same(*ptep, pte);
+ if (changed) {
+ set_huge_pte_at(vma->vm_mm, addr, ptep, pte);
+ flush_tlb_page(vma, addr);
+ }
+ return changed;
+}
+
+static inline pte_t huge_ptep_get(pte_t *ptep)
+{
+ return *ptep;
+}
+
+static inline void arch_clear_hugepage_flags(struct page *page)
+{
+}
+
+#endif /* _ASM_PARISC64_HUGETLB_H */
diff --git a/arch/parisc/include/asm/page.h b/arch/parisc/include/asm/page.h
index 60d5d17..80e742a 100644
--- a/arch/parisc/include/asm/page.h
+++ b/arch/parisc/include/asm/page.h
@@ -145,11 +145,22 @@
#endif /* CONFIG_DISCONTIGMEM */
#ifdef CONFIG_HUGETLB_PAGE
-#define HPAGE_SHIFT 22 /* 4MB (is this fixed?) */
+#define HPAGE_SHIFT PMD_SHIFT /* fixed for transparent huge pages */
#define HPAGE_SIZE ((1UL) << HPAGE_SHIFT)
#define HPAGE_MASK (~(HPAGE_SIZE - 1))
#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT)
+
+#if defined(CONFIG_64BIT) && defined(CONFIG_PARISC_PAGE_SIZE_4KB)
+# define REAL_HPAGE_SHIFT 20 /* 20 = 1MB */
+# define _HUGE_PAGE_SIZE_ENCODING_DEFAULT _PAGE_SIZE_ENCODING_1M
+#elif !defined(CONFIG_64BIT) && defined(CONFIG_PARISC_PAGE_SIZE_4KB)
+# define REAL_HPAGE_SHIFT 22 /* 22 = 4MB */
+# define _HUGE_PAGE_SIZE_ENCODING_DEFAULT _PAGE_SIZE_ENCODING_4M
+#else
+# define REAL_HPAGE_SHIFT 24 /* 24 = 16MB */
+# define _HUGE_PAGE_SIZE_ENCODING_DEFAULT _PAGE_SIZE_ENCODING_16M
#endif
+#endif /* CONFIG_HUGETLB_PAGE */
#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
diff --git a/arch/parisc/include/asm/pgalloc.h b/arch/parisc/include/asm/pgalloc.h
index 3edbb9f..f2fd327 100644
--- a/arch/parisc/include/asm/pgalloc.h
+++ b/arch/parisc/include/asm/pgalloc.h
@@ -35,7 +35,7 @@
PxD_FLAG_VALID |
PxD_FLAG_ATTACHED)
+ (__u32)(__pa((unsigned long)pgd) >> PxD_VALUE_SHIFT));
- /* The first pmd entry also is marked with _PAGE_GATEWAY as
+ /* The first pmd entry also is marked with PxD_FLAG_ATTACHED as
* a signal that this pmd may not be freed */
__pgd_val_set(*pgd, PxD_FLAG_ATTACHED);
#endif
diff --git a/arch/parisc/include/asm/pgtable.h b/arch/parisc/include/asm/pgtable.h
index f93c4a4..d8534f9 100644
--- a/arch/parisc/include/asm/pgtable.h
+++ b/arch/parisc/include/asm/pgtable.h
@@ -83,7 +83,11 @@
printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, (unsigned long)pgd_val(e))
/* This is the size of the initially mapped kernel memory */
-#define KERNEL_INITIAL_ORDER 24 /* 0 to 1<<24 = 16MB */
+#ifdef CONFIG_64BIT
+#define KERNEL_INITIAL_ORDER 25 /* 1<<25 = 32MB */
+#else
+#define KERNEL_INITIAL_ORDER 24 /* 1<<24 = 16MB */
+#endif
#define KERNEL_INITIAL_SIZE (1 << KERNEL_INITIAL_ORDER)
#if CONFIG_PGTABLE_LEVELS == 3
@@ -167,7 +171,7 @@
#define _PAGE_NO_CACHE_BIT 24 /* (0x080) Uncached Page (U bit) */
#define _PAGE_ACCESSED_BIT 23 /* (0x100) Software: Page Accessed */
#define _PAGE_PRESENT_BIT 22 /* (0x200) Software: translation valid */
-/* bit 21 was formerly the FLUSH bit but is now unused */
+#define _PAGE_HPAGE_BIT 21 /* (0x400) Software: Huge Page */
#define _PAGE_USER_BIT 20 /* (0x800) Software: User accessible page */
/* N.B. The bits are defined in terms of a 32 bit word above, so the */
@@ -194,6 +198,7 @@
#define _PAGE_NO_CACHE (1 << xlate_pabit(_PAGE_NO_CACHE_BIT))
#define _PAGE_ACCESSED (1 << xlate_pabit(_PAGE_ACCESSED_BIT))
#define _PAGE_PRESENT (1 << xlate_pabit(_PAGE_PRESENT_BIT))
+#define _PAGE_HUGE (1 << xlate_pabit(_PAGE_HPAGE_BIT))
#define _PAGE_USER (1 << xlate_pabit(_PAGE_USER_BIT))
#define _PAGE_TABLE (_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | _PAGE_DIRTY | _PAGE_ACCESSED)
@@ -217,7 +222,7 @@
#define PxD_FLAG_VALID (1 << xlate_pabit(_PxD_VALID_BIT))
#define PxD_FLAG_MASK (0xf)
#define PxD_FLAG_SHIFT (4)
-#define PxD_VALUE_SHIFT (8) /* (PAGE_SHIFT-PxD_FLAG_SHIFT) */
+#define PxD_VALUE_SHIFT (PFN_PTE_SHIFT-PxD_FLAG_SHIFT)
#ifndef __ASSEMBLY__
@@ -363,6 +368,18 @@
static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
/*
+ * Huge pte definitions.
+ */
+#ifdef CONFIG_HUGETLB_PAGE
+#define pte_huge(pte) (pte_val(pte) & _PAGE_HUGE)
+#define pte_mkhuge(pte) (__pte(pte_val(pte) | _PAGE_HUGE))
+#else
+#define pte_huge(pte) (0)
+#define pte_mkhuge(pte) (pte)
+#endif
+
+
+/*
* Conversion functions: convert a page and protection to a page entry,
* and a page entry and page directory to the page they refer to.
*/
@@ -410,8 +427,9 @@
/* Find an entry in the second-level page table.. */
#if CONFIG_PGTABLE_LEVELS == 3
+#define pmd_index(addr) (((addr) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))
#define pmd_offset(dir,address) \
-((pmd_t *) pgd_page_vaddr(*(dir)) + (((address)>>PMD_SHIFT) & (PTRS_PER_PMD-1)))
+((pmd_t *) pgd_page_vaddr(*(dir)) + pmd_index(address))
#else
#define pmd_offset(dir,addr) ((pmd_t *) dir)
#endif
diff --git a/arch/parisc/include/asm/processor.h b/arch/parisc/include/asm/processor.h
index 54adb60..7e759ec 100644
--- a/arch/parisc/include/asm/processor.h
+++ b/arch/parisc/include/asm/processor.h
@@ -192,33 +192,6 @@
*/
typedef unsigned int elf_caddr_t;
-#define start_thread_som(regs, new_pc, new_sp) do { \
- unsigned long *sp = (unsigned long *)new_sp; \
- __u32 spaceid = (__u32)current->mm->context; \
- unsigned long pc = (unsigned long)new_pc; \
- /* offset pc for priv. level */ \
- pc |= 3; \
- \
- regs->iasq[0] = spaceid; \
- regs->iasq[1] = spaceid; \
- regs->iaoq[0] = pc; \
- regs->iaoq[1] = pc + 4; \
- regs->sr[2] = LINUX_GATEWAY_SPACE; \
- regs->sr[3] = 0xffff; \
- regs->sr[4] = spaceid; \
- regs->sr[5] = spaceid; \
- regs->sr[6] = spaceid; \
- regs->sr[7] = spaceid; \
- regs->gr[ 0] = USER_PSW; \
- regs->gr[30] = ((new_sp)+63)&~63; \
- regs->gr[31] = pc; \
- \
- get_user(regs->gr[26],&sp[0]); \
- get_user(regs->gr[25],&sp[-1]); \
- get_user(regs->gr[24],&sp[-2]); \
- get_user(regs->gr[23],&sp[-3]); \
-} while(0)
-
/* The ELF abi wants things done a "wee bit" differently than
* som does. Supporting this behavior here avoids
* having our own version of create_elf_tables.
diff --git a/arch/parisc/include/uapi/asm/mman.h b/arch/parisc/include/uapi/asm/mman.h
index ecc3ae1..dd4d187 100644
--- a/arch/parisc/include/uapi/asm/mman.h
+++ b/arch/parisc/include/uapi/asm/mman.h
@@ -49,16 +49,6 @@
#define MADV_DONTFORK 10 /* don't inherit across fork */
#define MADV_DOFORK 11 /* do inherit across fork */
-/* The range 12-64 is reserved for page size specification. */
-#define MADV_4K_PAGES 12 /* Use 4K pages */
-#define MADV_16K_PAGES 14 /* Use 16K pages */
-#define MADV_64K_PAGES 16 /* Use 64K pages */
-#define MADV_256K_PAGES 18 /* Use 256K pages */
-#define MADV_1M_PAGES 20 /* Use 1 Megabyte pages */
-#define MADV_4M_PAGES 22 /* Use 4 Megabyte pages */
-#define MADV_16M_PAGES 24 /* Use 16 Megabyte pages */
-#define MADV_64M_PAGES 26 /* Use 64 Megabyte pages */
-
#define MADV_MERGEABLE 65 /* KSM may merge identical pages */
#define MADV_UNMERGEABLE 66 /* KSM may not merge identical pages */
diff --git a/arch/parisc/kernel/asm-offsets.c b/arch/parisc/kernel/asm-offsets.c
index 59001ce..d2f6257 100644
--- a/arch/parisc/kernel/asm-offsets.c
+++ b/arch/parisc/kernel/asm-offsets.c
@@ -290,6 +290,14 @@
DEFINE(ASM_PFN_PTE_SHIFT, PFN_PTE_SHIFT);
DEFINE(ASM_PT_INITIAL, PT_INITIAL);
BLANK();
+ /* HUGEPAGE_SIZE is only used in vmlinux.lds.S to align kernel text
+ * and kernel data on physical huge pages */
+#ifdef CONFIG_HUGETLB_PAGE
+ DEFINE(HUGEPAGE_SIZE, 1UL << REAL_HPAGE_SHIFT);
+#else
+ DEFINE(HUGEPAGE_SIZE, PAGE_SIZE);
+#endif
+ BLANK();
DEFINE(EXCDATA_IP, offsetof(struct exception_data, fault_ip));
DEFINE(EXCDATA_SPACE, offsetof(struct exception_data, fault_space));
DEFINE(EXCDATA_ADDR, offsetof(struct exception_data, fault_addr));
diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S
index c5ef408..623496c 100644
--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@@ -502,21 +502,38 @@
STREG \pte,0(\ptp)
.endm
+ /* We have (depending on the page size):
+ * - 38 to 52-bit Physical Page Number
+ * - 12 to 26-bit page offset
+ */
/* bitshift difference between a PFN (based on kernel's PAGE_SIZE)
* to a CPU TLB 4k PFN (4k => 12 bits to shift) */
- #define PAGE_ADD_SHIFT (PAGE_SHIFT-12)
+ #define PAGE_ADD_SHIFT (PAGE_SHIFT-12)
+ #define PAGE_ADD_HUGE_SHIFT (REAL_HPAGE_SHIFT-12)
/* Drop prot bits and convert to page addr for iitlbt and idtlbt */
- .macro convert_for_tlb_insert20 pte
+ .macro convert_for_tlb_insert20 pte,tmp
+#ifdef CONFIG_HUGETLB_PAGE
+ copy \pte,\tmp
+ extrd,u \tmp,(63-ASM_PFN_PTE_SHIFT)+(63-58)+PAGE_ADD_SHIFT,\
+ 64-PAGE_SHIFT-PAGE_ADD_SHIFT,\pte
+
+ depdi _PAGE_SIZE_ENCODING_DEFAULT,63,\
+ (63-58)+PAGE_ADD_SHIFT,\pte
+ extrd,u,*= \tmp,_PAGE_HPAGE_BIT+32,1,%r0
+ depdi _HUGE_PAGE_SIZE_ENCODING_DEFAULT,63,\
+ (63-58)+PAGE_ADD_HUGE_SHIFT,\pte
+#else /* Huge pages disabled */
extrd,u \pte,(63-ASM_PFN_PTE_SHIFT)+(63-58)+PAGE_ADD_SHIFT,\
64-PAGE_SHIFT-PAGE_ADD_SHIFT,\pte
depdi _PAGE_SIZE_ENCODING_DEFAULT,63,\
(63-58)+PAGE_ADD_SHIFT,\pte
+#endif
.endm
/* Convert the pte and prot to tlb insertion values. How
* this happens is quite subtle, read below */
- .macro make_insert_tlb spc,pte,prot
+ .macro make_insert_tlb spc,pte,prot,tmp
space_to_prot \spc \prot /* create prot id from space */
/* The following is the real subtlety. This is depositing
* T <-> _PAGE_REFTRAP
@@ -553,7 +570,7 @@
depdi 1,12,1,\prot
/* Drop prot bits and convert to page addr for iitlbt and idtlbt */
- convert_for_tlb_insert20 \pte
+ convert_for_tlb_insert20 \pte \tmp
.endm
/* Identical macro to make_insert_tlb above, except it
@@ -646,17 +663,12 @@
/*
- * Align fault_vector_20 on 4K boundary so that both
- * fault_vector_11 and fault_vector_20 are on the
- * same page. This is only necessary as long as we
- * write protect the kernel text, which we may stop
- * doing once we use large page translations to cover
- * the static part of the kernel address space.
+ * Fault_vectors are architecturally required to be aligned on a 2K
+ * boundary
*/
.text
-
- .align 4096
+ .align 2048
ENTRY(fault_vector_20)
/* First vector is invalid (0) */
@@ -1147,7 +1159,7 @@
tlb_lock spc,ptp,pte,t0,t1,dtlb_check_alias_20w
update_accessed ptp,pte,t0,t1
- make_insert_tlb spc,pte,prot
+ make_insert_tlb spc,pte,prot,t1
idtlbt pte,prot
@@ -1173,7 +1185,7 @@
tlb_lock spc,ptp,pte,t0,t1,nadtlb_check_alias_20w
update_accessed ptp,pte,t0,t1
- make_insert_tlb spc,pte,prot
+ make_insert_tlb spc,pte,prot,t1
idtlbt pte,prot
@@ -1267,7 +1279,7 @@
tlb_lock spc,ptp,pte,t0,t1,dtlb_check_alias_20
update_accessed ptp,pte,t0,t1
- make_insert_tlb spc,pte,prot
+ make_insert_tlb spc,pte,prot,t1
f_extend pte,t1
@@ -1295,7 +1307,7 @@
tlb_lock spc,ptp,pte,t0,t1,nadtlb_check_alias_20
update_accessed ptp,pte,t0,t1
- make_insert_tlb spc,pte,prot
+ make_insert_tlb spc,pte,prot,t1
f_extend pte,t1
@@ -1404,7 +1416,7 @@
tlb_lock spc,ptp,pte,t0,t1,itlb_fault
update_accessed ptp,pte,t0,t1
- make_insert_tlb spc,pte,prot
+ make_insert_tlb spc,pte,prot,t1
iitlbt pte,prot
@@ -1428,7 +1440,7 @@
tlb_lock spc,ptp,pte,t0,t1,naitlb_check_alias_20w
update_accessed ptp,pte,t0,t1
- make_insert_tlb spc,pte,prot
+ make_insert_tlb spc,pte,prot,t1
iitlbt pte,prot
@@ -1514,7 +1526,7 @@
tlb_lock spc,ptp,pte,t0,t1,itlb_fault
update_accessed ptp,pte,t0,t1
- make_insert_tlb spc,pte,prot
+ make_insert_tlb spc,pte,prot,t1
f_extend pte,t1
@@ -1534,7 +1546,7 @@
tlb_lock spc,ptp,pte,t0,t1,naitlb_check_alias_20
update_accessed ptp,pte,t0,t1
- make_insert_tlb spc,pte,prot
+ make_insert_tlb spc,pte,prot,t1
f_extend pte,t1
@@ -1566,7 +1578,7 @@
tlb_lock spc,ptp,pte,t0,t1,dbit_fault
update_dirty ptp,pte,t1
- make_insert_tlb spc,pte,prot
+ make_insert_tlb spc,pte,prot,t1
idtlbt pte,prot
@@ -1610,7 +1622,7 @@
tlb_lock spc,ptp,pte,t0,t1,dbit_fault
update_dirty ptp,pte,t1
- make_insert_tlb spc,pte,prot
+ make_insert_tlb spc,pte,prot,t1
f_extend pte,t1
diff --git a/arch/parisc/kernel/head.S b/arch/parisc/kernel/head.S
index e7d6452..75aa0db 100644
--- a/arch/parisc/kernel/head.S
+++ b/arch/parisc/kernel/head.S
@@ -69,7 +69,7 @@
stw,ma %arg2,4(%r1)
stw,ma %arg3,4(%r1)
- /* Initialize startup VM. Just map first 8/16 MB of memory */
+ /* Initialize startup VM. Just map first 16/32 MB of memory */
load32 PA(swapper_pg_dir),%r4
mtctl %r4,%cr24 /* Initialize kernel root pointer */
mtctl %r4,%cr25 /* Initialize user root pointer */
@@ -107,7 +107,7 @@
/* Now initialize the PTEs themselves. We use RWX for
* everything ... it will get remapped correctly later */
ldo 0+_PAGE_KERNEL_RWX(%r0),%r3 /* Hardwired 0 phys addr start */
- ldi (1<<(KERNEL_INITIAL_ORDER-PAGE_SHIFT)),%r11 /* PFN count */
+ load32 (1<<(KERNEL_INITIAL_ORDER-PAGE_SHIFT)),%r11 /* PFN count */
load32 PA(pg0),%r1
$pgt_fill_loop:
diff --git a/arch/parisc/kernel/setup.c b/arch/parisc/kernel/setup.c
index 72a3c65..f7ea626 100644
--- a/arch/parisc/kernel/setup.c
+++ b/arch/parisc/kernel/setup.c
@@ -130,7 +130,16 @@
printk(KERN_INFO "The 32-bit Kernel has started...\n");
#endif
- printk(KERN_INFO "Default page size is %dKB.\n", (int)(PAGE_SIZE / 1024));
+ printk(KERN_INFO "Kernel default page size is %d KB. Huge pages ",
+ (int)(PAGE_SIZE / 1024));
+#ifdef CONFIG_HUGETLB_PAGE
+ printk(KERN_CONT "enabled with %d MB physical and %d MB virtual size",
+ 1 << (REAL_HPAGE_SHIFT - 20), 1 << (HPAGE_SHIFT - 20));
+#else
+ printk(KERN_CONT "disabled");
+#endif
+ printk(KERN_CONT ".\n");
+
pdc_console_init();
@@ -377,6 +386,7 @@
void start_parisc(void)
{
extern void start_kernel(void);
+ extern void early_trap_init(void);
int ret, cpunum;
struct pdc_coproc_cfg coproc_cfg;
@@ -397,6 +407,8 @@
panic("must have an fpu to boot linux");
}
+ early_trap_init(); /* initialize checksum of fault_vector */
+
start_kernel();
// not reached
}
diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S
index 0b8d26d..3fbd725 100644
--- a/arch/parisc/kernel/syscall.S
+++ b/arch/parisc/kernel/syscall.S
@@ -369,7 +369,7 @@
ldo -16(%r30),%r29 /* Reference param save area */
#endif
ldo TASK_REGS(%r1),%r26
- bl do_syscall_trace_exit,%r2
+ BL do_syscall_trace_exit,%r2
STREG %r28,TASK_PT_GR28(%r1) /* save return value now */
ldo -THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 /* get task ptr */
LDREG TI_TASK(%r1), %r1
@@ -390,7 +390,7 @@
#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#endif
- bl do_syscall_trace_exit,%r2
+ BL do_syscall_trace_exit,%r2
ldo TASK_REGS(%r1),%r26
ldil L%syscall_exit_rfi,%r1
diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c
index b99b39f..553b098 100644
--- a/arch/parisc/kernel/traps.c
+++ b/arch/parisc/kernel/traps.c
@@ -807,7 +807,7 @@
}
-int __init check_ivt(void *iva)
+void __init initialize_ivt(const void *iva)
{
extern u32 os_hpmc_size;
extern const u32 os_hpmc[];
@@ -818,8 +818,8 @@
u32 *hpmcp;
u32 length;
- if (strcmp((char *)iva, "cows can fly"))
- return -1;
+ if (strcmp((const char *)iva, "cows can fly"))
+ panic("IVT invalid");
ivap = (u32 *)iva;
@@ -839,28 +839,23 @@
check += ivap[i];
ivap[5] = -check;
-
- return 0;
}
+
+/* early_trap_init() is called before we set up kernel mappings and
+ * write-protect the kernel */
+void __init early_trap_init(void)
+{
+ extern const void fault_vector_20;
+
#ifndef CONFIG_64BIT
-extern const void fault_vector_11;
+ extern const void fault_vector_11;
+ initialize_ivt(&fault_vector_11);
#endif
-extern const void fault_vector_20;
+
+ initialize_ivt(&fault_vector_20);
+}
void __init trap_init(void)
{
- void *iva;
-
- if (boot_cpu_data.cpu_type >= pcxu)
- iva = (void *) &fault_vector_20;
- else
-#ifdef CONFIG_64BIT
- panic("Can't boot 64-bit OS on PA1.1 processor!");
-#else
- iva = (void *) &fault_vector_11;
-#endif
-
- if (check_ivt(iva))
- panic("IVT invalid");
}
diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S
index 0dacc5c..308f290 100644
--- a/arch/parisc/kernel/vmlinux.lds.S
+++ b/arch/parisc/kernel/vmlinux.lds.S
@@ -60,7 +60,7 @@
EXIT_DATA
}
PERCPU_SECTION(8)
- . = ALIGN(PAGE_SIZE);
+ . = ALIGN(HUGEPAGE_SIZE);
__init_end = .;
/* freed after init ends here */
@@ -116,7 +116,7 @@
* that we can properly leave these
* as writable
*/
- . = ALIGN(PAGE_SIZE);
+ . = ALIGN(HUGEPAGE_SIZE);
data_start = .;
EXCEPTION_TABLE(8)
@@ -135,8 +135,11 @@
_edata = .;
/* BSS */
- BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 8)
+ BSS_SECTION(PAGE_SIZE, PAGE_SIZE, PAGE_SIZE)
+ /* bootmap is allocated in setup_bootmem() directly behind bss. */
+
+ . = ALIGN(HUGEPAGE_SIZE);
_end = . ;
STABS_DEBUG
diff --git a/arch/parisc/mm/Makefile b/arch/parisc/mm/Makefile
index 758ceef..134393d 100644
--- a/arch/parisc/mm/Makefile
+++ b/arch/parisc/mm/Makefile
@@ -3,3 +3,4 @@
#
obj-y := init.o fault.o ioremap.o
+obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
diff --git a/arch/parisc/mm/hugetlbpage.c b/arch/parisc/mm/hugetlbpage.c
new file mode 100644
index 0000000..f6fdc77
--- /dev/null
+++ b/arch/parisc/mm/hugetlbpage.c
@@ -0,0 +1,161 @@
+/*
+ * PARISC64 Huge TLB page support.
+ *
+ * This parisc implementation is heavily based on the SPARC and x86 code.
+ *
+ * Copyright (C) 2015 Helge Deller <deller@gmx.de>
+ */
+
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/hugetlb.h>
+#include <linux/pagemap.h>
+#include <linux/sysctl.h>
+
+#include <asm/mman.h>
+#include <asm/pgalloc.h>
+#include <asm/tlb.h>
+#include <asm/tlbflush.h>
+#include <asm/cacheflush.h>
+#include <asm/mmu_context.h>
+
+
+unsigned long
+hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
+ unsigned long len, unsigned long pgoff, unsigned long flags)
+{
+ struct hstate *h = hstate_file(file);
+
+ if (len & ~huge_page_mask(h))
+ return -EINVAL;
+ if (len > TASK_SIZE)
+ return -ENOMEM;
+
+ if (flags & MAP_FIXED)
+ if (prepare_hugepage_range(file, addr, len))
+ return -EINVAL;
+
+ if (addr)
+ addr = ALIGN(addr, huge_page_size(h));
+
+ /* we need to make sure the colouring is OK */
+ return arch_get_unmapped_area(file, addr, len, pgoff, flags);
+}
+
+
+pte_t *huge_pte_alloc(struct mm_struct *mm,
+ unsigned long addr, unsigned long sz)
+{
+ pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmd;
+ pte_t *pte = NULL;
+
+ /* We must align the address, because our caller will run
+ * set_huge_pte_at() on whatever we return, which writes out
+ * all of the sub-ptes for the hugepage range. So we have
+ * to give it the first such sub-pte.
+ */
+ addr &= HPAGE_MASK;
+
+ pgd = pgd_offset(mm, addr);
+ pud = pud_alloc(mm, pgd, addr);
+ if (pud) {
+ pmd = pmd_alloc(mm, pud, addr);
+ if (pmd)
+ pte = pte_alloc_map(mm, NULL, pmd, addr);
+ }
+ return pte;
+}
+
+pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
+{
+ pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmd;
+ pte_t *pte = NULL;
+
+ addr &= HPAGE_MASK;
+
+ pgd = pgd_offset(mm, addr);
+ if (!pgd_none(*pgd)) {
+ pud = pud_offset(pgd, addr);
+ if (!pud_none(*pud)) {
+ pmd = pmd_offset(pud, addr);
+ if (!pmd_none(*pmd))
+ pte = pte_offset_map(pmd, addr);
+ }
+ }
+ return pte;
+}
+
+/* Purge data and instruction TLB entries. Must be called holding
+ * the pa_tlb_lock. The TLB purge instructions are slow on SMP
+ * machines since the purge must be broadcast to all CPUs.
+ */
+static inline void purge_tlb_entries_huge(struct mm_struct *mm, unsigned long addr)
+{
+ int i;
+
+ /* We may use multiple physical huge pages (e.g. 2x1 MB) to emulate
+ * Linux standard huge pages (e.g. 2 MB) */
+ BUILD_BUG_ON(REAL_HPAGE_SHIFT > HPAGE_SHIFT);
+
+ addr &= HPAGE_MASK;
+ addr |= _HUGE_PAGE_SIZE_ENCODING_DEFAULT;
+
+ for (i = 0; i < (1 << (HPAGE_SHIFT-REAL_HPAGE_SHIFT)); i++) {
+ mtsp(mm->context, 1);
+ pdtlb(addr);
+ if (unlikely(split_tlb))
+ pitlb(addr);
+ addr += (1UL << REAL_HPAGE_SHIFT);
+ }
+}
+
+void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep, pte_t entry)
+{
+ unsigned long addr_start;
+ int i;
+
+ addr &= HPAGE_MASK;
+ addr_start = addr;
+
+ for (i = 0; i < (1 << HUGETLB_PAGE_ORDER); i++) {
+ /* Directly write pte entry. We could call set_pte_at(mm, addr, ptep, entry)
+ * instead, but then we get double locking on pa_tlb_lock. */
+ *ptep = entry;
+ ptep++;
+
+ /* Drop the PAGE_SIZE/non-huge tlb entry */
+ purge_tlb_entries(mm, addr);
+
+ addr += PAGE_SIZE;
+ pte_val(entry) += PAGE_SIZE;
+ }
+
+ purge_tlb_entries_huge(mm, addr_start);
+}
+
+
+pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep)
+{
+ pte_t entry;
+
+ entry = *ptep;
+ set_huge_pte_at(mm, addr, ptep, __pte(0));
+
+ return entry;
+}
+
+int pmd_huge(pmd_t pmd)
+{
+ return 0;
+}
+
+int pud_huge(pud_t pud)
+{
+ return 0;
+}
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index c5fec48..1b366c4 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -409,15 +409,11 @@
unsigned long vaddr;
unsigned long ro_start;
unsigned long ro_end;
- unsigned long fv_addr;
- unsigned long gw_addr;
- extern const unsigned long fault_vector_20;
- extern void * const linux_gateway_page;
+ unsigned long kernel_end;
ro_start = __pa((unsigned long)_text);
ro_end = __pa((unsigned long)&data_start);
- fv_addr = __pa((unsigned long)&fault_vector_20) & PAGE_MASK;
- gw_addr = __pa((unsigned long)&linux_gateway_page) & PAGE_MASK;
+ kernel_end = __pa((unsigned long)&_end);
end_paddr = start_paddr + size;
@@ -475,24 +471,25 @@
for (tmp2 = start_pte; tmp2 < PTRS_PER_PTE; tmp2++, pg_table++) {
pte_t pte;
- /*
- * Map the fault vector writable so we can
- * write the HPMC checksum.
- */
if (force)
pte = __mk_pte(address, pgprot);
- else if (parisc_text_address(vaddr) &&
- address != fv_addr)
+ else if (parisc_text_address(vaddr)) {
pte = __mk_pte(address, PAGE_KERNEL_EXEC);
+ if (address >= ro_start && address < kernel_end)
+ pte = pte_mkhuge(pte);
+ }
else
#if defined(CONFIG_PARISC_PAGE_SIZE_4KB)
- if (address >= ro_start && address < ro_end
- && address != fv_addr
- && address != gw_addr)
- pte = __mk_pte(address, PAGE_KERNEL_RO);
- else
+ if (address >= ro_start && address < ro_end) {
+ pte = __mk_pte(address, PAGE_KERNEL_EXEC);
+ pte = pte_mkhuge(pte);
+ } else
#endif
+ {
pte = __mk_pte(address, pgprot);
+ if (address >= ro_start && address < kernel_end)
+ pte = pte_mkhuge(pte);
+ }
if (address >= end_paddr) {
if (force)
@@ -536,15 +533,12 @@
/* force the kernel to see the new TLB entries */
__flush_tlb_range(0, init_begin, init_end);
- /* Attempt to catch anyone trying to execute code here
- * by filling the page with BRK insns.
- */
- memset((void *)init_begin, 0x00, init_end - init_begin);
+
/* finally dump all the instructions which were cached, since the
* pages are no-longer executable */
flush_icache_range(init_begin, init_end);
- free_initmem_default(-1);
+ free_initmem_default(POISON_FREE_INITMEM);
/* set up a new led state on systems shipped LED State panel */
pdc_chassis_send_status(PDC_CHASSIS_DIRECT_BCOMPLETE);
@@ -728,8 +722,8 @@
unsigned long size;
start_paddr = pmem_ranges[range].start_pfn << PAGE_SHIFT;
- end_paddr = start_paddr + (pmem_ranges[range].pages << PAGE_SHIFT);
size = pmem_ranges[range].pages << PAGE_SHIFT;
+ end_paddr = start_paddr + size;
map_pages((unsigned long)__va(start_paddr), start_paddr,
size, PAGE_KERNEL, 0);
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 4ddd780..c2b7522 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -273,10 +273,9 @@
static __always_inline void setup_smap(struct cpuinfo_x86 *c)
{
- unsigned long eflags;
+ unsigned long eflags = native_save_fl();
/* This should have been cleared long ago */
- raw_local_save_flags(eflags);
BUG_ON(eflags & X86_EFLAGS_AC);
if (cpu_has(c, X86_FEATURE_SMAP)) {
diff --git a/arch/x86/kernel/fpu/signal.c b/arch/x86/kernel/fpu/signal.c
index ef29b74..31c6a60 100644
--- a/arch/x86/kernel/fpu/signal.c
+++ b/arch/x86/kernel/fpu/signal.c
@@ -385,20 +385,19 @@
*/
void fpu__init_prepare_fx_sw_frame(void)
{
- int fsave_header_size = sizeof(struct fregs_state);
int size = xstate_size + FP_XSTATE_MAGIC2_SIZE;
- if (config_enabled(CONFIG_X86_32))
- size += fsave_header_size;
-
fx_sw_reserved.magic1 = FP_XSTATE_MAGIC1;
fx_sw_reserved.extended_size = size;
fx_sw_reserved.xfeatures = xfeatures_mask;
fx_sw_reserved.xstate_size = xstate_size;
- if (config_enabled(CONFIG_IA32_EMULATION)) {
+ if (config_enabled(CONFIG_IA32_EMULATION) ||
+ config_enabled(CONFIG_X86_32)) {
+ int fsave_header_size = sizeof(struct fregs_state);
+
fx_sw_reserved_ia32 = fx_sw_reserved;
- fx_sw_reserved_ia32.extended_size += fsave_header_size;
+ fx_sw_reserved_ia32.extended_size = size + fsave_header_size;
}
}
diff --git a/arch/x86/kernel/fpu/xstate.c b/arch/x86/kernel/fpu/xstate.c
index 6454f27..70fc312 100644
--- a/arch/x86/kernel/fpu/xstate.c
+++ b/arch/x86/kernel/fpu/xstate.c
@@ -694,7 +694,6 @@
if (!boot_cpu_has(X86_FEATURE_XSAVE))
return NULL;
- xsave = ¤t->thread.fpu.state.xsave;
/*
* We should not ever be requesting features that we
* have not enabled. Remember that pcntxt_mask is
diff --git a/arch/x86/kernel/mcount_64.S b/arch/x86/kernel/mcount_64.S
index 94ea120..87e1762 100644
--- a/arch/x86/kernel/mcount_64.S
+++ b/arch/x86/kernel/mcount_64.S
@@ -278,6 +278,12 @@
/* save_mcount_regs fills in first two parameters */
save_mcount_regs
+ /*
+ * When DYNAMIC_FTRACE is not defined, ARCH_SUPPORTS_FTRACE_OPS is not
+ * set (see include/asm/ftrace.h and include/linux/ftrace.h). Only the
+ * ip and parent ip are used and the list function is called when
+ * function tracing is enabled.
+ */
call *ftrace_trace_function
restore_mcount_regs
diff --git a/arch/x86/mm/mpx.c b/arch/x86/mm/mpx.c
index b0ae85f..1202d5c 100644
--- a/arch/x86/mm/mpx.c
+++ b/arch/x86/mm/mpx.c
@@ -586,6 +586,29 @@
}
/*
+ * We only want to do a 4-byte get_user() on 32-bit. Otherwise,
+ * we might run off the end of the bounds table if we are on
+ * a 64-bit kernel and try to get 8 bytes.
+ */
+int get_user_bd_entry(struct mm_struct *mm, unsigned long *bd_entry_ret,
+ long __user *bd_entry_ptr)
+{
+ u32 bd_entry_32;
+ int ret;
+
+ if (is_64bit_mm(mm))
+ return get_user(*bd_entry_ret, bd_entry_ptr);
+
+ /*
+ * Note that get_user() uses the type of the *pointer* to
+ * establish the size of the get, not the destination.
+ */
+ ret = get_user(bd_entry_32, (u32 __user *)bd_entry_ptr);
+ *bd_entry_ret = bd_entry_32;
+ return ret;
+}
+
+/*
* Get the base of bounds tables pointed by specific bounds
* directory entry.
*/
@@ -605,7 +628,7 @@
int need_write = 0;
pagefault_disable();
- ret = get_user(bd_entry, bd_entry_ptr);
+ ret = get_user_bd_entry(mm, &bd_entry, bd_entry_ptr);
pagefault_enable();
if (!ret)
break;
@@ -700,11 +723,23 @@
*/
static inline unsigned long bd_entry_virt_space(struct mm_struct *mm)
{
- unsigned long long virt_space = (1ULL << boot_cpu_data.x86_virt_bits);
- if (is_64bit_mm(mm))
- return virt_space / MPX_BD_NR_ENTRIES_64;
- else
- return virt_space / MPX_BD_NR_ENTRIES_32;
+ unsigned long long virt_space;
+ unsigned long long GB = (1ULL << 30);
+
+ /*
+ * This covers 32-bit emulation as well as 32-bit kernels
+ * running on 64-bit harware.
+ */
+ if (!is_64bit_mm(mm))
+ return (4ULL * GB) / MPX_BD_NR_ENTRIES_32;
+
+ /*
+ * 'x86_virt_bits' returns what the hardware is capable
+ * of, and returns the full >32-bit adddress space when
+ * running 32-bit kernels on 64-bit hardware.
+ */
+ virt_space = (1ULL << boot_cpu_data.x86_virt_bits);
+ return virt_space / MPX_BD_NR_ENTRIES_64;
}
/*
diff --git a/block/blk.h b/block/blk.h
index da722eb..c43926d 100644
--- a/block/blk.h
+++ b/block/blk.h
@@ -72,8 +72,6 @@
void __blk_queue_free_tags(struct request_queue *q);
bool __blk_end_bidi_request(struct request *rq, int error,
unsigned int nr_bytes, unsigned int bidi_bytes);
-int blk_queue_enter(struct request_queue *q, gfp_t gfp);
-void blk_queue_exit(struct request_queue *q);
void blk_freeze_queue(struct request_queue *q);
static inline void blk_queue_enter_live(struct request_queue *q)
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 71cfdf7..2eb5f0e 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -1,4 +1,5 @@
menu "Clock Source drivers"
+ depends on !ARCH_USES_GETTIMEOFFSET
config CLKSRC_OF
bool
diff --git a/drivers/clocksource/fsl_ftm_timer.c b/drivers/clocksource/fsl_ftm_timer.c
index 10202f1..517e1c7 100644
--- a/drivers/clocksource/fsl_ftm_timer.c
+++ b/drivers/clocksource/fsl_ftm_timer.c
@@ -203,7 +203,7 @@
int err;
ftm_writel(0x00, priv->clkevt_base + FTM_CNTIN);
- ftm_writel(~0UL, priv->clkevt_base + FTM_MOD);
+ ftm_writel(~0u, priv->clkevt_base + FTM_MOD);
ftm_reset_counter(priv->clkevt_base);
@@ -230,7 +230,7 @@
int err;
ftm_writel(0x00, priv->clksrc_base + FTM_CNTIN);
- ftm_writel(~0UL, priv->clksrc_base + FTM_MOD);
+ ftm_writel(~0u, priv->clksrc_base + FTM_MOD);
ftm_reset_counter(priv->clksrc_base);
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index e24c2b6..7b0aa82 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -126,6 +126,7 @@
Sunrise Point-LP (PCH)
DNV (SOC)
Broxton (SOC)
+ Lewisburg (PCH)
This driver can also be built as a module. If so, the module
will be called i2c-i801.
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index c306751..f62d697 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -62,6 +62,8 @@
* Sunrise Point-LP (PCH) 0x9d23 32 hard yes yes yes
* DNV (SOC) 0x19df 32 hard yes yes yes
* Broxton (SOC) 0x5ad4 32 hard yes yes yes
+ * Lewisburg (PCH) 0xa1a3 32 hard yes yes yes
+ * Lewisburg Supersku (PCH) 0xa223 32 hard yes yes yes
*
* Features supported by this driver:
* Software PEC no
@@ -206,6 +208,8 @@
#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS 0x9d23
#define PCI_DEVICE_ID_INTEL_DNV_SMBUS 0x19df
#define PCI_DEVICE_ID_INTEL_BROXTON_SMBUS 0x5ad4
+#define PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS 0xa1a3
+#define PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS 0xa223
struct i801_mux_config {
char *gpio_chip;
@@ -869,6 +873,8 @@
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DNV_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BROXTON_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS) },
{ 0, }
};
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 1e4d99d..9bb0b05 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -50,6 +50,7 @@
#include <linux/of_device.h>
#include <linux/of_dma.h>
#include <linux/of_gpio.h>
+#include <linux/pinctrl/consumer.h>
#include <linux/platform_data/i2c-imx.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index e23a7b0..0b20449 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -662,8 +662,10 @@
static void xiic_start_xfer(struct xiic_i2c *i2c)
{
-
+ spin_lock(&i2c->lock);
+ xiic_reinit(i2c);
__xiic_start_xfer(i2c);
+ spin_unlock(&i2c->lock);
}
static int xiic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 040af5c..ba8eb08 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -715,7 +715,7 @@
if (wakeirq > 0 && wakeirq != client->irq)
status = dev_pm_set_dedicated_wake_irq(dev, wakeirq);
else if (client->irq > 0)
- status = dev_pm_set_wake_irq(dev, wakeirq);
+ status = dev_pm_set_wake_irq(dev, client->irq);
else
status = 0;
diff --git a/drivers/iio/adc/ad7793.c b/drivers/iio/adc/ad7793.c
index eea0c79..4d960d3 100644
--- a/drivers/iio/adc/ad7793.c
+++ b/drivers/iio/adc/ad7793.c
@@ -101,7 +101,7 @@
#define AD7795_CH_AIN1M_AIN1M 8 /* AIN1(-) - AIN1(-) */
/* ID Register Bit Designations (AD7793_REG_ID) */
-#define AD7785_ID 0xB
+#define AD7785_ID 0x3
#define AD7792_ID 0xA
#define AD7793_ID 0xB
#define AD7794_ID 0xF
diff --git a/drivers/iio/adc/vf610_adc.c b/drivers/iio/adc/vf610_adc.c
index 599cde3..b10f629 100644
--- a/drivers/iio/adc/vf610_adc.c
+++ b/drivers/iio/adc/vf610_adc.c
@@ -106,6 +106,13 @@
#define DEFAULT_SAMPLE_TIME 1000
+/* V at 25°C of 696 mV */
+#define VF610_VTEMP25_3V0 950
+/* V at 25°C of 699 mV */
+#define VF610_VTEMP25_3V3 867
+/* Typical sensor slope coefficient at all temperatures */
+#define VF610_TEMP_SLOPE_COEFF 1840
+
enum clk_sel {
VF610_ADCIOC_BUSCLK_SET,
VF610_ADCIOC_ALTCLK_SET,
@@ -197,6 +204,8 @@
adc_feature->clk_div = 8;
}
+ adck_rate = ipg_rate / adc_feature->clk_div;
+
/*
* Determine the long sample time adder value to be used based
* on the default minimum sample time provided.
@@ -221,7 +230,6 @@
* BCT (Base Conversion Time): fixed to 25 ADCK cycles for 12 bit mode
* LSTAdder(Long Sample Time): 3, 5, 7, 9, 13, 17, 21, 25 ADCK cycles
*/
- adck_rate = ipg_rate / info->adc_feature.clk_div;
for (i = 0; i < ARRAY_SIZE(vf610_hw_avgs); i++)
info->sample_freq_avail[i] =
adck_rate / (6 + vf610_hw_avgs[i] *
@@ -663,11 +671,13 @@
break;
case IIO_TEMP:
/*
- * Calculate in degree Celsius times 1000
- * Using sensor slope of 1.84 mV/°C and
- * V at 25°C of 696 mV
- */
- *val = 25000 - ((int)info->value - 864) * 1000000 / 1840;
+ * Calculate in degree Celsius times 1000
+ * Using the typical sensor slope of 1.84 mV/°C
+ * and VREFH_ADC at 3.3V, V at 25°C of 699 mV
+ */
+ *val = 25000 - ((int)info->value - VF610_VTEMP25_3V3) *
+ 1000000 / VF610_TEMP_SLOPE_COEFF;
+
break;
default:
mutex_unlock(&indio_dev->mlock);
diff --git a/drivers/iio/adc/xilinx-xadc-core.c b/drivers/iio/adc/xilinx-xadc-core.c
index 0370624..02e636a 100644
--- a/drivers/iio/adc/xilinx-xadc-core.c
+++ b/drivers/iio/adc/xilinx-xadc-core.c
@@ -841,6 +841,7 @@
case XADC_REG_VCCINT:
case XADC_REG_VCCAUX:
case XADC_REG_VREFP:
+ case XADC_REG_VREFN:
case XADC_REG_VCCBRAM:
case XADC_REG_VCCPINT:
case XADC_REG_VCCPAUX:
diff --git a/drivers/iio/dac/ad5064.c b/drivers/iio/dac/ad5064.c
index 9e4d2c1..81ca008 100644
--- a/drivers/iio/dac/ad5064.c
+++ b/drivers/iio/dac/ad5064.c
@@ -113,12 +113,16 @@
ID_AD5065,
ID_AD5628_1,
ID_AD5628_2,
+ ID_AD5629_1,
+ ID_AD5629_2,
ID_AD5648_1,
ID_AD5648_2,
ID_AD5666_1,
ID_AD5666_2,
ID_AD5668_1,
ID_AD5668_2,
+ ID_AD5669_1,
+ ID_AD5669_2,
};
static int ad5064_write(struct ad5064_state *st, unsigned int cmd,
@@ -291,7 +295,7 @@
{ },
};
-#define AD5064_CHANNEL(chan, addr, bits) { \
+#define AD5064_CHANNEL(chan, addr, bits, _shift) { \
.type = IIO_VOLTAGE, \
.indexed = 1, \
.output = 1, \
@@ -303,36 +307,39 @@
.sign = 'u', \
.realbits = (bits), \
.storagebits = 16, \
- .shift = 20 - bits, \
+ .shift = (_shift), \
}, \
.ext_info = ad5064_ext_info, \
}
-#define DECLARE_AD5064_CHANNELS(name, bits) \
+#define DECLARE_AD5064_CHANNELS(name, bits, shift) \
const struct iio_chan_spec name[] = { \
- AD5064_CHANNEL(0, 0, bits), \
- AD5064_CHANNEL(1, 1, bits), \
- AD5064_CHANNEL(2, 2, bits), \
- AD5064_CHANNEL(3, 3, bits), \
- AD5064_CHANNEL(4, 4, bits), \
- AD5064_CHANNEL(5, 5, bits), \
- AD5064_CHANNEL(6, 6, bits), \
- AD5064_CHANNEL(7, 7, bits), \
+ AD5064_CHANNEL(0, 0, bits, shift), \
+ AD5064_CHANNEL(1, 1, bits, shift), \
+ AD5064_CHANNEL(2, 2, bits, shift), \
+ AD5064_CHANNEL(3, 3, bits, shift), \
+ AD5064_CHANNEL(4, 4, bits, shift), \
+ AD5064_CHANNEL(5, 5, bits, shift), \
+ AD5064_CHANNEL(6, 6, bits, shift), \
+ AD5064_CHANNEL(7, 7, bits, shift), \
}
-#define DECLARE_AD5065_CHANNELS(name, bits) \
+#define DECLARE_AD5065_CHANNELS(name, bits, shift) \
const struct iio_chan_spec name[] = { \
- AD5064_CHANNEL(0, 0, bits), \
- AD5064_CHANNEL(1, 3, bits), \
+ AD5064_CHANNEL(0, 0, bits, shift), \
+ AD5064_CHANNEL(1, 3, bits, shift), \
}
-static DECLARE_AD5064_CHANNELS(ad5024_channels, 12);
-static DECLARE_AD5064_CHANNELS(ad5044_channels, 14);
-static DECLARE_AD5064_CHANNELS(ad5064_channels, 16);
+static DECLARE_AD5064_CHANNELS(ad5024_channels, 12, 8);
+static DECLARE_AD5064_CHANNELS(ad5044_channels, 14, 6);
+static DECLARE_AD5064_CHANNELS(ad5064_channels, 16, 4);
-static DECLARE_AD5065_CHANNELS(ad5025_channels, 12);
-static DECLARE_AD5065_CHANNELS(ad5045_channels, 14);
-static DECLARE_AD5065_CHANNELS(ad5065_channels, 16);
+static DECLARE_AD5065_CHANNELS(ad5025_channels, 12, 8);
+static DECLARE_AD5065_CHANNELS(ad5045_channels, 14, 6);
+static DECLARE_AD5065_CHANNELS(ad5065_channels, 16, 4);
+
+static DECLARE_AD5064_CHANNELS(ad5629_channels, 12, 4);
+static DECLARE_AD5064_CHANNELS(ad5669_channels, 16, 0);
static const struct ad5064_chip_info ad5064_chip_info_tbl[] = {
[ID_AD5024] = {
@@ -382,6 +389,18 @@
.channels = ad5024_channels,
.num_channels = 8,
},
+ [ID_AD5629_1] = {
+ .shared_vref = true,
+ .internal_vref = 2500000,
+ .channels = ad5629_channels,
+ .num_channels = 8,
+ },
+ [ID_AD5629_2] = {
+ .shared_vref = true,
+ .internal_vref = 5000000,
+ .channels = ad5629_channels,
+ .num_channels = 8,
+ },
[ID_AD5648_1] = {
.shared_vref = true,
.internal_vref = 2500000,
@@ -418,6 +437,18 @@
.channels = ad5064_channels,
.num_channels = 8,
},
+ [ID_AD5669_1] = {
+ .shared_vref = true,
+ .internal_vref = 2500000,
+ .channels = ad5669_channels,
+ .num_channels = 8,
+ },
+ [ID_AD5669_2] = {
+ .shared_vref = true,
+ .internal_vref = 5000000,
+ .channels = ad5669_channels,
+ .num_channels = 8,
+ },
};
static inline unsigned int ad5064_num_vref(struct ad5064_state *st)
@@ -597,10 +628,16 @@
unsigned int addr, unsigned int val)
{
struct i2c_client *i2c = to_i2c_client(st->dev);
+ int ret;
st->data.i2c[0] = (cmd << 4) | addr;
put_unaligned_be16(val, &st->data.i2c[1]);
- return i2c_master_send(i2c, st->data.i2c, 3);
+
+ ret = i2c_master_send(i2c, st->data.i2c, 3);
+ if (ret < 0)
+ return ret;
+
+ return 0;
}
static int ad5064_i2c_probe(struct i2c_client *i2c,
@@ -616,12 +653,12 @@
}
static const struct i2c_device_id ad5064_i2c_ids[] = {
- {"ad5629-1", ID_AD5628_1},
- {"ad5629-2", ID_AD5628_2},
- {"ad5629-3", ID_AD5628_2}, /* similar enough to ad5629-2 */
- {"ad5669-1", ID_AD5668_1},
- {"ad5669-2", ID_AD5668_2},
- {"ad5669-3", ID_AD5668_2}, /* similar enough to ad5669-2 */
+ {"ad5629-1", ID_AD5629_1},
+ {"ad5629-2", ID_AD5629_2},
+ {"ad5629-3", ID_AD5629_2}, /* similar enough to ad5629-2 */
+ {"ad5669-1", ID_AD5669_1},
+ {"ad5669-2", ID_AD5669_2},
+ {"ad5669-3", ID_AD5669_2}, /* similar enough to ad5669-2 */
{}
};
MODULE_DEVICE_TABLE(i2c, ad5064_i2c_ids);
diff --git a/drivers/iio/humidity/si7020.c b/drivers/iio/humidity/si7020.c
index 12128d1..71991b5 100644
--- a/drivers/iio/humidity/si7020.c
+++ b/drivers/iio/humidity/si7020.c
@@ -50,10 +50,10 @@
switch (mask) {
case IIO_CHAN_INFO_RAW:
- ret = i2c_smbus_read_word_data(*client,
- chan->type == IIO_TEMP ?
- SI7020CMD_TEMP_HOLD :
- SI7020CMD_RH_HOLD);
+ ret = i2c_smbus_read_word_swapped(*client,
+ chan->type == IIO_TEMP ?
+ SI7020CMD_TEMP_HOLD :
+ SI7020CMD_RH_HOLD);
if (ret < 0)
return ret;
*val = ret >> 2;
diff --git a/drivers/irqchip/irq-gic-common.c b/drivers/irqchip/irq-gic-common.c
index 44a077f..f174ce0 100644
--- a/drivers/irqchip/irq-gic-common.c
+++ b/drivers/irqchip/irq-gic-common.c
@@ -84,12 +84,15 @@
writel_relaxed(GICD_INT_DEF_PRI_X4, base + GIC_DIST_PRI + i);
/*
- * Disable all interrupts. Leave the PPI and SGIs alone
- * as they are enabled by redistributor registers.
+ * Deactivate and disable all SPIs. Leave the PPI and SGIs
+ * alone as they are in the redistributor registers on GICv3.
*/
- for (i = 32; i < gic_irqs; i += 32)
+ for (i = 32; i < gic_irqs; i += 32) {
writel_relaxed(GICD_INT_EN_CLR_X32,
- base + GIC_DIST_ENABLE_CLEAR + i / 8);
+ base + GIC_DIST_ACTIVE_CLEAR + i / 8);
+ writel_relaxed(GICD_INT_EN_CLR_X32,
+ base + GIC_DIST_ENABLE_CLEAR + i / 8);
+ }
if (sync_access)
sync_access();
@@ -102,7 +105,9 @@
/*
* Deal with the banked PPI and SGI interrupts - disable all
* PPI interrupts, ensure all SGI interrupts are enabled.
+ * Make sure everything is deactivated.
*/
+ writel_relaxed(GICD_INT_EN_CLR_X32, base + GIC_DIST_ACTIVE_CLEAR);
writel_relaxed(GICD_INT_EN_CLR_PPI, base + GIC_DIST_ENABLE_CLEAR);
writel_relaxed(GICD_INT_EN_SET_SGI, base + GIC_DIST_ENABLE_SET);
diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
index 515c823..abf2ffa 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -73,9 +73,11 @@
union gic_base cpu_base;
#ifdef CONFIG_CPU_PM
u32 saved_spi_enable[DIV_ROUND_UP(1020, 32)];
+ u32 saved_spi_active[DIV_ROUND_UP(1020, 32)];
u32 saved_spi_conf[DIV_ROUND_UP(1020, 16)];
u32 saved_spi_target[DIV_ROUND_UP(1020, 4)];
u32 __percpu *saved_ppi_enable;
+ u32 __percpu *saved_ppi_active;
u32 __percpu *saved_ppi_conf;
#endif
struct irq_domain *domain;
@@ -566,6 +568,10 @@
for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++)
gic_data[gic_nr].saved_spi_enable[i] =
readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4);
+
+ for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++)
+ gic_data[gic_nr].saved_spi_active[i] =
+ readl_relaxed(dist_base + GIC_DIST_ACTIVE_SET + i * 4);
}
/*
@@ -604,9 +610,19 @@
writel_relaxed(gic_data[gic_nr].saved_spi_target[i],
dist_base + GIC_DIST_TARGET + i * 4);
- for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++)
+ for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++) {
+ writel_relaxed(GICD_INT_EN_CLR_X32,
+ dist_base + GIC_DIST_ENABLE_CLEAR + i * 4);
writel_relaxed(gic_data[gic_nr].saved_spi_enable[i],
dist_base + GIC_DIST_ENABLE_SET + i * 4);
+ }
+
+ for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++) {
+ writel_relaxed(GICD_INT_EN_CLR_X32,
+ dist_base + GIC_DIST_ACTIVE_CLEAR + i * 4);
+ writel_relaxed(gic_data[gic_nr].saved_spi_active[i],
+ dist_base + GIC_DIST_ACTIVE_SET + i * 4);
+ }
writel_relaxed(GICD_ENABLE, dist_base + GIC_DIST_CTRL);
}
@@ -631,6 +647,10 @@
for (i = 0; i < DIV_ROUND_UP(32, 32); i++)
ptr[i] = readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4);
+ ptr = raw_cpu_ptr(gic_data[gic_nr].saved_ppi_active);
+ for (i = 0; i < DIV_ROUND_UP(32, 32); i++)
+ ptr[i] = readl_relaxed(dist_base + GIC_DIST_ACTIVE_SET + i * 4);
+
ptr = raw_cpu_ptr(gic_data[gic_nr].saved_ppi_conf);
for (i = 0; i < DIV_ROUND_UP(32, 16); i++)
ptr[i] = readl_relaxed(dist_base + GIC_DIST_CONFIG + i * 4);
@@ -654,8 +674,18 @@
return;
ptr = raw_cpu_ptr(gic_data[gic_nr].saved_ppi_enable);
- for (i = 0; i < DIV_ROUND_UP(32, 32); i++)
+ for (i = 0; i < DIV_ROUND_UP(32, 32); i++) {
+ writel_relaxed(GICD_INT_EN_CLR_X32,
+ dist_base + GIC_DIST_ENABLE_CLEAR + i * 4);
writel_relaxed(ptr[i], dist_base + GIC_DIST_ENABLE_SET + i * 4);
+ }
+
+ ptr = raw_cpu_ptr(gic_data[gic_nr].saved_ppi_active);
+ for (i = 0; i < DIV_ROUND_UP(32, 32); i++) {
+ writel_relaxed(GICD_INT_EN_CLR_X32,
+ dist_base + GIC_DIST_ACTIVE_CLEAR + i * 4);
+ writel_relaxed(ptr[i], dist_base + GIC_DIST_ACTIVE_SET + i * 4);
+ }
ptr = raw_cpu_ptr(gic_data[gic_nr].saved_ppi_conf);
for (i = 0; i < DIV_ROUND_UP(32, 16); i++)
@@ -710,6 +740,10 @@
sizeof(u32));
BUG_ON(!gic->saved_ppi_enable);
+ gic->saved_ppi_active = __alloc_percpu(DIV_ROUND_UP(32, 32) * 4,
+ sizeof(u32));
+ BUG_ON(!gic->saved_ppi_active);
+
gic->saved_ppi_conf = __alloc_percpu(DIV_ROUND_UP(32, 16) * 4,
sizeof(u32));
BUG_ON(!gic->saved_ppi_conf);
diff --git a/drivers/mtd/nand/jz4740_nand.c b/drivers/mtd/nand/jz4740_nand.c
index dc4e844..5a99a93 100644
--- a/drivers/mtd/nand/jz4740_nand.c
+++ b/drivers/mtd/nand/jz4740_nand.c
@@ -25,6 +25,7 @@
#include <linux/gpio.h>
+#include <asm/mach-jz4740/gpio.h>
#include <asm/mach-jz4740/jz4740_nand.h>
#define JZ_REG_NAND_CTRL 0x50
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index cc74142..ece544e 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -3110,7 +3110,7 @@
*/
static void nand_shutdown(struct mtd_info *mtd)
{
- nand_get_device(mtd, FL_SHUTDOWN);
+ nand_get_device(mtd, FL_PM_SUSPENDED);
}
/* Set default functions */
diff --git a/drivers/staging/iio/Kconfig b/drivers/staging/iio/Kconfig
index 6d5b38d..9d7f000 100644
--- a/drivers/staging/iio/Kconfig
+++ b/drivers/staging/iio/Kconfig
@@ -18,7 +18,8 @@
source "drivers/staging/iio/trigger/Kconfig"
config IIO_DUMMY_EVGEN
- tristate
+ tristate
+ select IRQ_WORK
config IIO_SIMPLE_DUMMY
tristate "An example driver with no hardware requirements"
diff --git a/drivers/staging/iio/adc/lpc32xx_adc.c b/drivers/staging/iio/adc/lpc32xx_adc.c
index d11c54b..b51f237 100644
--- a/drivers/staging/iio/adc/lpc32xx_adc.c
+++ b/drivers/staging/iio/adc/lpc32xx_adc.c
@@ -76,7 +76,7 @@
if (mask == IIO_CHAN_INFO_RAW) {
mutex_lock(&indio_dev->mlock);
- clk_enable(info->clk);
+ clk_prepare_enable(info->clk);
/* Measurement setup */
__raw_writel(AD_INTERNAL | (chan->address) | AD_REFp | AD_REFm,
LPC32XX_ADC_SELECT(info->adc_base));
@@ -84,7 +84,7 @@
__raw_writel(AD_PDN_CTRL | AD_STROBE,
LPC32XX_ADC_CTRL(info->adc_base));
wait_for_completion(&info->completion); /* set by ISR */
- clk_disable(info->clk);
+ clk_disable_unprepare(info->clk);
*val = info->value;
mutex_unlock(&indio_dev->mlock);
diff --git a/drivers/staging/wilc1000/coreconfigurator.c b/drivers/staging/wilc1000/coreconfigurator.c
index e10c6ff..9568bdb 100644
--- a/drivers/staging/wilc1000/coreconfigurator.c
+++ b/drivers/staging/wilc1000/coreconfigurator.c
@@ -13,12 +13,8 @@
#include "wilc_wlan.h"
#include <linux/errno.h>
#include <linux/slab.h>
-#include <linux/etherdevice.h>
#define TAG_PARAM_OFFSET (MAC_HDR_LEN + TIME_STAMP_LEN + \
BEACON_INTERVAL_LEN + CAP_INFO_LEN)
-#define ADDR1 4
-#define ADDR2 10
-#define ADDR3 16
/* Basic Frame Type Codes (2-bit) */
enum basic_frame_type {
@@ -175,32 +171,38 @@
return ((header[1] & 0x02) >> 1);
}
+/* This function extracts the MAC Address in 'address1' field of the MAC */
+/* header and updates the MAC Address in the allocated 'addr' variable. */
+static inline void get_address1(u8 *pu8msa, u8 *addr)
+{
+ memcpy(addr, pu8msa + 4, 6);
+}
+
+/* This function extracts the MAC Address in 'address2' field of the MAC */
+/* header and updates the MAC Address in the allocated 'addr' variable. */
+static inline void get_address2(u8 *pu8msa, u8 *addr)
+{
+ memcpy(addr, pu8msa + 10, 6);
+}
+
+/* This function extracts the MAC Address in 'address3' field of the MAC */
+/* header and updates the MAC Address in the allocated 'addr' variable. */
+static inline void get_address3(u8 *pu8msa, u8 *addr)
+{
+ memcpy(addr, pu8msa + 16, 6);
+}
+
/* This function extracts the BSSID from the incoming WLAN packet based on */
-/* the 'from ds' bit, and updates the MAC Address in the allocated 'data' */
+/* the 'from ds' bit, and updates the MAC Address in the allocated 'addr' */
/* variable. */
static inline void get_BSSID(u8 *data, u8 *bssid)
{
if (get_from_ds(data) == 1)
- /*
- * Extract the MAC Address in 'address2' field of the MAC
- * header and update the MAC Address in the allocated 'data'
- * variable.
- */
- ether_addr_copy(data, bssid + ADDR2);
+ get_address2(data, bssid);
else if (get_to_ds(data) == 1)
- /*
- * Extract the MAC Address in 'address1' field of the MAC
- * header and update the MAC Address in the allocated 'data'
- * variable.
- */
- ether_addr_copy(data, bssid + ADDR1);
+ get_address1(data, bssid);
else
- /*
- * Extract the MAC Address in 'address3' field of the MAC
- * header and update the MAC Address in the allocated 'data'
- * variable.
- */
- ether_addr_copy(data, bssid + ADDR3);
+ get_address3(data, bssid);
}
/* This function extracts the SSID from a beacon/probe response frame */
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 1384426..ed77614 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -169,7 +169,7 @@
{
struct n_tty_data *ldata = tty->disc_data;
- tty_audit_add_data(tty, to, n, ldata->icanon);
+ tty_audit_add_data(tty, from, n, ldata->icanon);
return copy_to_user(to, from, n);
}
diff --git a/drivers/tty/serial/8250/8250_fsl.c b/drivers/tty/serial/8250/8250_fsl.c
index c0533a5..910bfee5 100644
--- a/drivers/tty/serial/8250/8250_fsl.c
+++ b/drivers/tty/serial/8250/8250_fsl.c
@@ -60,3 +60,4 @@
spin_unlock_irqrestore(&up->port.lock, flags);
return 1;
}
+EXPORT_SYMBOL_GPL(fsl8250_handle_irq);
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index e6f5e12..6412f14 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -373,6 +373,7 @@
depends on SERIAL_8250 && PCI
select HSU_DMA if SERIAL_8250_DMA
select HSU_DMA_PCI if X86_INTEL_MID
+ select RATIONAL
help
Selecting this option will enable handling of the extra features
present on the UART found on Intel Medfield SOC and various other
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 1aec440..f38beb2 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1539,7 +1539,6 @@
tristate "Freescale lpuart serial port support"
depends on HAS_DMA
select SERIAL_CORE
- select SERIAL_EARLYCON
help
Support for the on-chip lpuart on some Freescale SOCs.
@@ -1547,6 +1546,7 @@
bool "Console on Freescale lpuart serial port"
depends on SERIAL_FSL_LPUART=y
select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
help
If you have enabled the lpuart serial port on the Freescale SoCs,
you can make it the console by answering Y to this option.
diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c
index 681e0f3..a1c0a89 100644
--- a/drivers/tty/serial/bcm63xx_uart.c
+++ b/drivers/tty/serial/bcm63xx_uart.c
@@ -474,7 +474,7 @@
/* register irq and enable rx interrupts */
ret = request_irq(port->irq, bcm_uart_interrupt, 0,
- bcm_uart_type(port), port);
+ dev_name(port->dev), port);
if (ret)
return ret;
bcm_uart_writel(port, UART_RX_INT_MASK, UART_IR_REG);
diff --git a/drivers/tty/serial/etraxfs-uart.c b/drivers/tty/serial/etraxfs-uart.c
index 6813e31..2f80bc7 100644
--- a/drivers/tty/serial/etraxfs-uart.c
+++ b/drivers/tty/serial/etraxfs-uart.c
@@ -894,7 +894,7 @@
up->regi_ser = of_iomap(np, 0);
up->port.dev = &pdev->dev;
- up->gpios = mctrl_gpio_init(&pdev->dev, 0);
+ up->gpios = mctrl_gpio_init_noauto(&pdev->dev, 0);
if (IS_ERR(up->gpios))
return PTR_ERR(up->gpios);
diff --git a/drivers/tty/tty_audit.c b/drivers/tty/tty_audit.c
index 90ca082..3d245cd 100644
--- a/drivers/tty/tty_audit.c
+++ b/drivers/tty/tty_audit.c
@@ -265,7 +265,7 @@
*
* Audit @data of @size from @tty, if necessary.
*/
-void tty_audit_add_data(struct tty_struct *tty, unsigned char *data,
+void tty_audit_add_data(struct tty_struct *tty, const void *data,
size_t size, unsigned icanon)
{
struct tty_audit_buf *buf;
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 0c41dbc..bcc8e1e8 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -1282,18 +1282,22 @@
int was_stopped = tty->stopped;
if (tty->ops->send_xchar) {
+ down_read(&tty->termios_rwsem);
tty->ops->send_xchar(tty, ch);
+ up_read(&tty->termios_rwsem);
return 0;
}
if (tty_write_lock(tty, 0) < 0)
return -ERESTARTSYS;
+ down_read(&tty->termios_rwsem);
if (was_stopped)
start_tty(tty);
tty->ops->write(tty, &ch, 1);
if (was_stopped)
stop_tty(tty);
+ up_read(&tty->termios_rwsem);
tty_write_unlock(tty);
return 0;
}
diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c
index 9c5aebf..1445dd3 100644
--- a/drivers/tty/tty_ioctl.c
+++ b/drivers/tty/tty_ioctl.c
@@ -1147,16 +1147,12 @@
spin_unlock_irq(&tty->flow_lock);
break;
case TCIOFF:
- down_read(&tty->termios_rwsem);
if (STOP_CHAR(tty) != __DISABLED_CHAR)
retval = tty_send_xchar(tty, STOP_CHAR(tty));
- up_read(&tty->termios_rwsem);
break;
case TCION:
- down_read(&tty->termios_rwsem);
if (START_CHAR(tty) != __DISABLED_CHAR)
retval = tty_send_xchar(tty, START_CHAR(tty));
- up_read(&tty->termios_rwsem);
break;
default:
return -EINVAL;
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index 5af8f18..629e3c8 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -592,7 +592,7 @@
/* Restart the work queue in case no characters kick it off. Safe if
already running */
- schedule_work(&tty->port->buf.work);
+ tty_buffer_restart_work(tty->port);
tty_unlock(tty);
return retval;
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index 6ccbf60..5a048b7 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -84,6 +84,12 @@
struct imx_usbmisc_data *usbmisc_data;
bool supports_runtime_pm;
bool in_lpm;
+ /* SoC before i.mx6 (except imx23/imx28) needs three clks */
+ bool need_three_clks;
+ struct clk *clk_ipg;
+ struct clk *clk_ahb;
+ struct clk *clk_per;
+ /* --------------------------------- */
};
/* Common functions shared by usbmisc drivers */
@@ -135,6 +141,102 @@
}
/* End of common functions shared by usbmisc drivers*/
+static int imx_get_clks(struct device *dev)
+{
+ struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
+ int ret = 0;
+
+ data->clk_ipg = devm_clk_get(dev, "ipg");
+ if (IS_ERR(data->clk_ipg)) {
+ /* If the platform only needs one clocks */
+ data->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(data->clk)) {
+ ret = PTR_ERR(data->clk);
+ dev_err(dev,
+ "Failed to get clks, err=%ld,%ld\n",
+ PTR_ERR(data->clk), PTR_ERR(data->clk_ipg));
+ return ret;
+ }
+ return ret;
+ }
+
+ data->clk_ahb = devm_clk_get(dev, "ahb");
+ if (IS_ERR(data->clk_ahb)) {
+ ret = PTR_ERR(data->clk_ahb);
+ dev_err(dev,
+ "Failed to get ahb clock, err=%d\n", ret);
+ return ret;
+ }
+
+ data->clk_per = devm_clk_get(dev, "per");
+ if (IS_ERR(data->clk_per)) {
+ ret = PTR_ERR(data->clk_per);
+ dev_err(dev,
+ "Failed to get per clock, err=%d\n", ret);
+ return ret;
+ }
+
+ data->need_three_clks = true;
+ return ret;
+}
+
+static int imx_prepare_enable_clks(struct device *dev)
+{
+ struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
+ int ret = 0;
+
+ if (data->need_three_clks) {
+ ret = clk_prepare_enable(data->clk_ipg);
+ if (ret) {
+ dev_err(dev,
+ "Failed to prepare/enable ipg clk, err=%d\n",
+ ret);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(data->clk_ahb);
+ if (ret) {
+ dev_err(dev,
+ "Failed to prepare/enable ahb clk, err=%d\n",
+ ret);
+ clk_disable_unprepare(data->clk_ipg);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(data->clk_per);
+ if (ret) {
+ dev_err(dev,
+ "Failed to prepare/enable per clk, err=%d\n",
+ ret);
+ clk_disable_unprepare(data->clk_ahb);
+ clk_disable_unprepare(data->clk_ipg);
+ return ret;
+ }
+ } else {
+ ret = clk_prepare_enable(data->clk);
+ if (ret) {
+ dev_err(dev,
+ "Failed to prepare/enable clk, err=%d\n",
+ ret);
+ return ret;
+ }
+ }
+
+ return ret;
+}
+
+static void imx_disable_unprepare_clks(struct device *dev)
+{
+ struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
+
+ if (data->need_three_clks) {
+ clk_disable_unprepare(data->clk_per);
+ clk_disable_unprepare(data->clk_ahb);
+ clk_disable_unprepare(data->clk_ipg);
+ } else {
+ clk_disable_unprepare(data->clk);
+ }
+}
static int ci_hdrc_imx_probe(struct platform_device *pdev)
{
@@ -145,31 +247,31 @@
.flags = CI_HDRC_SET_NON_ZERO_TTHA,
};
int ret;
- const struct of_device_id *of_id =
- of_match_device(ci_hdrc_imx_dt_ids, &pdev->dev);
- const struct ci_hdrc_imx_platform_flag *imx_platform_flag = of_id->data;
+ const struct of_device_id *of_id;
+ const struct ci_hdrc_imx_platform_flag *imx_platform_flag;
+
+ of_id = of_match_device(ci_hdrc_imx_dt_ids, &pdev->dev);
+ if (!of_id)
+ return -ENODEV;
+
+ imx_platform_flag = of_id->data;
data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
+ platform_set_drvdata(pdev, data);
data->usbmisc_data = usbmisc_get_init_data(&pdev->dev);
if (IS_ERR(data->usbmisc_data))
return PTR_ERR(data->usbmisc_data);
- data->clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(data->clk)) {
- dev_err(&pdev->dev,
- "Failed to get clock, err=%ld\n", PTR_ERR(data->clk));
- return PTR_ERR(data->clk);
- }
-
- ret = clk_prepare_enable(data->clk);
- if (ret) {
- dev_err(&pdev->dev,
- "Failed to prepare or enable clock, err=%d\n", ret);
+ ret = imx_get_clks(&pdev->dev);
+ if (ret)
return ret;
- }
+
+ ret = imx_prepare_enable_clks(&pdev->dev);
+ if (ret)
+ return ret;
data->phy = devm_usb_get_phy_by_phandle(&pdev->dev, "fsl,usbphy", 0);
if (IS_ERR(data->phy)) {
@@ -212,8 +314,6 @@
goto disable_device;
}
- platform_set_drvdata(pdev, data);
-
if (data->supports_runtime_pm) {
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
@@ -226,7 +326,7 @@
disable_device:
ci_hdrc_remove_device(data->ci_pdev);
err_clk:
- clk_disable_unprepare(data->clk);
+ imx_disable_unprepare_clks(&pdev->dev);
return ret;
}
@@ -240,7 +340,7 @@
pm_runtime_put_noidle(&pdev->dev);
}
ci_hdrc_remove_device(data->ci_pdev);
- clk_disable_unprepare(data->clk);
+ imx_disable_unprepare_clks(&pdev->dev);
return 0;
}
@@ -252,7 +352,7 @@
dev_dbg(dev, "at %s\n", __func__);
- clk_disable_unprepare(data->clk);
+ imx_disable_unprepare_clks(dev);
data->in_lpm = true;
return 0;
@@ -270,7 +370,7 @@
return 0;
}
- ret = clk_prepare_enable(data->clk);
+ ret = imx_prepare_enable_clks(dev);
if (ret)
return ret;
@@ -285,7 +385,7 @@
return 0;
clk_disable:
- clk_disable_unprepare(data->clk);
+ imx_disable_unprepare_clks(dev);
return ret;
}
diff --git a/drivers/usb/chipidea/debug.c b/drivers/usb/chipidea/debug.c
index 080b7be..58c8485 100644
--- a/drivers/usb/chipidea/debug.c
+++ b/drivers/usb/chipidea/debug.c
@@ -322,8 +322,10 @@
return -EINVAL;
pm_runtime_get_sync(ci->dev);
+ disable_irq(ci->irq);
ci_role_stop(ci);
ret = ci_role_start(ci, role);
+ enable_irq(ci->irq);
pm_runtime_put_sync(ci->dev);
return ret ? ret : count;
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 8223fe7..391a122 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -1751,6 +1751,22 @@
return retval;
}
+static void ci_udc_stop_for_otg_fsm(struct ci_hdrc *ci)
+{
+ if (!ci_otg_is_fsm_mode(ci))
+ return;
+
+ mutex_lock(&ci->fsm.lock);
+ if (ci->fsm.otg->state == OTG_STATE_A_PERIPHERAL) {
+ ci->fsm.a_bidl_adis_tmout = 1;
+ ci_hdrc_otg_fsm_start(ci);
+ } else if (ci->fsm.otg->state == OTG_STATE_B_PERIPHERAL) {
+ ci->fsm.protocol = PROTO_UNDEF;
+ ci->fsm.otg->state = OTG_STATE_UNDEFINED;
+ }
+ mutex_unlock(&ci->fsm.lock);
+}
+
/**
* ci_udc_stop: unregister a gadget driver
*/
@@ -1775,6 +1791,7 @@
ci->driver = NULL;
spin_unlock_irqrestore(&ci->lock, flags);
+ ci_udc_stop_for_otg_fsm(ci);
return 0;
}
diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
index fcea4eb..ab8b027 100644
--- a/drivers/usb/chipidea/usbmisc_imx.c
+++ b/drivers/usb/chipidea/usbmisc_imx.c
@@ -500,7 +500,11 @@
{
struct resource *res;
struct imx_usbmisc *data;
- struct of_device_id *tmp_dev;
+ const struct of_device_id *of_id;
+
+ of_id = of_match_device(usbmisc_imx_dt_ids, &pdev->dev);
+ if (!of_id)
+ return -ENODEV;
data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
if (!data)
@@ -513,9 +517,7 @@
if (IS_ERR(data->base))
return PTR_ERR(data->base);
- tmp_dev = (struct of_device_id *)
- of_match_device(usbmisc_imx_dt_ids, &pdev->dev);
- data->ops = (const struct usbmisc_ops *)tmp_dev->data;
+ data->ops = (const struct usbmisc_ops *)of_id->data;
platform_set_drvdata(pdev, data);
return 0;
diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c
index 433bbc3..071964c 100644
--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -884,11 +884,11 @@
add_wait_queue(&usblp->wwait, &waita);
for (;;) {
- set_current_state(TASK_INTERRUPTIBLE);
if (mutex_lock_interruptible(&usblp->mut)) {
rc = -EINTR;
break;
}
+ set_current_state(TASK_INTERRUPTIBLE);
rc = usblp_wtest(usblp, nonblock);
mutex_unlock(&usblp->mut);
if (rc <= 0)
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index a99c89e..dd28010 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -77,8 +77,7 @@
config USB_OTG_FSM
tristate "USB 2.0 OTG FSM implementation"
- depends on USB
- select USB_OTG
+ depends on USB && USB_OTG
select USB_PHY
help
Implements OTG Finite State Machine as specified in On-The-Go
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index e79baf7..571c217 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -324,12 +324,13 @@
*/
static void dwc2_hcd_rem_wakeup(struct dwc2_hsotg *hsotg)
{
- if (hsotg->lx_state == DWC2_L2) {
+ if (hsotg->bus_suspended) {
hsotg->flags.b.port_suspend_change = 1;
usb_hcd_resume_root_hub(hsotg->priv);
- } else {
- hsotg->flags.b.port_l1_change = 1;
}
+
+ if (hsotg->lx_state == DWC2_L1)
+ hsotg->flags.b.port_l1_change = 1;
}
/**
@@ -1428,8 +1429,8 @@
dev_dbg(hsotg->dev, "Clear Resume: HPRT0=%0x\n",
dwc2_readl(hsotg->regs + HPRT0));
- hsotg->bus_suspended = 0;
dwc2_hcd_rem_wakeup(hsotg);
+ hsotg->bus_suspended = 0;
/* Change to L0 state */
hsotg->lx_state = DWC2_L0;
diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index 5859b0f..e61d773 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -108,7 +108,8 @@
.host_ls_low_power_phy_clk = -1,
.ts_dline = -1,
.reload_ctl = -1,
- .ahbcfg = 0x7, /* INCR16 */
+ .ahbcfg = GAHBCFG_HBSTLEN_INCR16 <<
+ GAHBCFG_HBSTLEN_SHIFT,
.uframe_sched = -1,
.external_id_pin_ctl = -1,
.hibernation = -1,
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index 77a622c..009d830 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -34,6 +34,8 @@
#define PCI_DEVICE_ID_INTEL_BSW 0x22b7
#define PCI_DEVICE_ID_INTEL_SPTLP 0x9d30
#define PCI_DEVICE_ID_INTEL_SPTH 0xa130
+#define PCI_DEVICE_ID_INTEL_BXT 0x0aaa
+#define PCI_DEVICE_ID_INTEL_APL 0x5aaa
static const struct acpi_gpio_params reset_gpios = { 0, 0, false };
static const struct acpi_gpio_params cs_gpios = { 1, 0, false };
@@ -210,6 +212,8 @@
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MRFLD), },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SPTLP), },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SPTH), },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BXT), },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_APL), },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB), },
{ } /* Terminating Entry */
};
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 55ba447..e24a01c 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2744,12 +2744,34 @@
}
dwc->gadget.ops = &dwc3_gadget_ops;
- dwc->gadget.max_speed = USB_SPEED_SUPER;
dwc->gadget.speed = USB_SPEED_UNKNOWN;
dwc->gadget.sg_supported = true;
dwc->gadget.name = "dwc3-gadget";
/*
+ * FIXME We might be setting max_speed to <SUPER, however versions
+ * <2.20a of dwc3 have an issue with metastability (documented
+ * elsewhere in this driver) which tells us we can't set max speed to
+ * anything lower than SUPER.
+ *
+ * Because gadget.max_speed is only used by composite.c and function
+ * drivers (i.e. it won't go into dwc3's registers) we are allowing this
+ * to happen so we avoid sending SuperSpeed Capability descriptor
+ * together with our BOS descriptor as that could confuse host into
+ * thinking we can handle super speed.
+ *
+ * Note that, in fact, we won't even support GetBOS requests when speed
+ * is less than super speed because we don't have means, yet, to tell
+ * composite.c that we are USB 2.0 + LPM ECN.
+ */
+ if (dwc->revision < DWC3_REVISION_220A)
+ dwc3_trace(trace_dwc3_gadget,
+ "Changing max_speed on rev %08x\n",
+ dwc->revision);
+
+ dwc->gadget.max_speed = dwc->maximum_speed;
+
+ /*
* Per databook, DWC3 needs buffer size to be aligned to MaxPacketSize
* on ep out.
*/
diff --git a/drivers/usb/gadget/function/f_loopback.c b/drivers/usb/gadget/function/f_loopback.c
index 23933bd..ddc3aad 100644
--- a/drivers/usb/gadget/function/f_loopback.c
+++ b/drivers/usb/gadget/function/f_loopback.c
@@ -329,7 +329,7 @@
for (i = 0; i < loop->qlen && result == 0; i++) {
result = -ENOMEM;
- in_req = usb_ep_alloc_request(loop->in_ep, GFP_KERNEL);
+ in_req = usb_ep_alloc_request(loop->in_ep, GFP_ATOMIC);
if (!in_req)
goto fail;
diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index f0f2b06..f92f5af 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -1633,7 +1633,7 @@
spin_lock(&udc->lock);
int_enb = usba_int_enb_get(udc);
- status = usba_readl(udc, INT_STA) & int_enb;
+ status = usba_readl(udc, INT_STA) & (int_enb | USBA_HIGH_SPEED);
DBG(DBG_INT, "irq, status=%#08x\n", status);
if (status & USBA_DET_SUSPEND) {
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 5d2d7e9..0230965 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -782,12 +782,15 @@
status |= USB_PORT_STAT_SUSPEND;
}
}
- if ((raw_port_status & PORT_PLS_MASK) == XDEV_U0
- && (raw_port_status & PORT_POWER)
- && (bus_state->suspended_ports & (1 << wIndex))) {
- bus_state->suspended_ports &= ~(1 << wIndex);
- if (hcd->speed < HCD_USB3)
- bus_state->port_c_suspend |= 1 << wIndex;
+ if ((raw_port_status & PORT_PLS_MASK) == XDEV_U0 &&
+ (raw_port_status & PORT_POWER)) {
+ if (bus_state->suspended_ports & (1 << wIndex)) {
+ bus_state->suspended_ports &= ~(1 << wIndex);
+ if (hcd->speed < HCD_USB3)
+ bus_state->port_c_suspend |= 1 << wIndex;
+ }
+ bus_state->resume_done[wIndex] = 0;
+ clear_bit(wIndex, &bus_state->resuming_ports);
}
if (raw_port_status & PORT_CONNECT) {
status |= USB_PORT_STAT_CONNECTION;
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index fa83625..6c5e813 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -3896,28 +3896,6 @@
return ret;
}
-static int ep_ring_is_processing(struct xhci_hcd *xhci,
- int slot_id, unsigned int ep_index)
-{
- struct xhci_virt_device *xdev;
- struct xhci_ring *ep_ring;
- struct xhci_ep_ctx *ep_ctx;
- struct xhci_virt_ep *xep;
- dma_addr_t hw_deq;
-
- xdev = xhci->devs[slot_id];
- xep = &xhci->devs[slot_id]->eps[ep_index];
- ep_ring = xep->ring;
- ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
-
- if ((le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK) != EP_STATE_RUNNING)
- return 0;
-
- hw_deq = le64_to_cpu(ep_ctx->deq) & ~EP_CTX_CYCLE_MASK;
- return (hw_deq !=
- xhci_trb_virt_to_dma(ep_ring->enq_seg, ep_ring->enqueue));
-}
-
/*
* Check transfer ring to guarantee there is enough room for the urb.
* Update ISO URB start_frame and interval.
@@ -3983,10 +3961,12 @@
}
/* Calculate the start frame and put it in urb->start_frame. */
- if (HCC_CFC(xhci->hcc_params) &&
- ep_ring_is_processing(xhci, slot_id, ep_index)) {
- urb->start_frame = xep->next_frame_id;
- goto skip_start_over;
+ if (HCC_CFC(xhci->hcc_params) && !list_empty(&ep_ring->td_list)) {
+ if ((le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK) ==
+ EP_STATE_RUNNING) {
+ urb->start_frame = xep->next_frame_id;
+ goto skip_start_over;
+ }
}
start_frame = readl(&xhci->run_regs->microframe_index);
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 6e7dc6f..dfa44d3 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -175,6 +175,16 @@
command |= CMD_RESET;
writel(command, &xhci->op_regs->command);
+ /* Existing Intel xHCI controllers require a delay of 1 mS,
+ * after setting the CMD_RESET bit, and before accessing any
+ * HC registers. This allows the HC to complete the
+ * reset operation and be ready for HC register access.
+ * Without this delay, the subsequent HC register access,
+ * may result in a system hang very rarely.
+ */
+ if (xhci->quirks & XHCI_INTEL_HOST)
+ udelay(1000);
+
ret = xhci_handshake(&xhci->op_regs->command,
CMD_RESET, 0, 10 * 1000 * 1000);
if (ret)
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index ba13529..18cfc0a 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -132,7 +132,7 @@
/*-------------------------------------------------------------------------*/
#ifndef CONFIG_BLACKFIN
-static int musb_ulpi_read(struct usb_phy *phy, u32 offset)
+static int musb_ulpi_read(struct usb_phy *phy, u32 reg)
{
void __iomem *addr = phy->io_priv;
int i = 0;
@@ -151,7 +151,7 @@
* ULPICarKitControlDisableUTMI after clearing POWER_SUSPENDM.
*/
- musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)offset);
+ musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)reg);
musb_writeb(addr, MUSB_ULPI_REG_CONTROL,
MUSB_ULPI_REG_REQ | MUSB_ULPI_RDN_WR);
@@ -176,7 +176,7 @@
return ret;
}
-static int musb_ulpi_write(struct usb_phy *phy, u32 offset, u32 data)
+static int musb_ulpi_write(struct usb_phy *phy, u32 val, u32 reg)
{
void __iomem *addr = phy->io_priv;
int i = 0;
@@ -191,8 +191,8 @@
power &= ~MUSB_POWER_SUSPENDM;
musb_writeb(addr, MUSB_POWER, power);
- musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)offset);
- musb_writeb(addr, MUSB_ULPI_REG_DATA, (u8)data);
+ musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)reg);
+ musb_writeb(addr, MUSB_ULPI_REG_DATA, (u8)val);
musb_writeb(addr, MUSB_ULPI_REG_CONTROL, MUSB_ULPI_REG_REQ);
while (!(musb_readb(addr, MUSB_ULPI_REG_CONTROL)
@@ -1668,7 +1668,7 @@
static bool use_dma = 1;
/* "modprobe ... use_dma=0" etc */
-module_param(use_dma, bool, 0);
+module_param(use_dma, bool, 0644);
MODULE_PARM_DESC(use_dma, "enable/disable use of DMA");
void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit)
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 26c65e6..795a45b 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -112,22 +112,32 @@
struct musb *musb = ep->musb;
void __iomem *epio = ep->regs;
u16 csr;
- u16 lastcsr = 0;
int retries = 1000;
csr = musb_readw(epio, MUSB_TXCSR);
while (csr & MUSB_TXCSR_FIFONOTEMPTY) {
- if (csr != lastcsr)
- dev_dbg(musb->controller, "Host TX FIFONOTEMPTY csr: %02x\n", csr);
- lastcsr = csr;
csr |= MUSB_TXCSR_FLUSHFIFO | MUSB_TXCSR_TXPKTRDY;
musb_writew(epio, MUSB_TXCSR, csr);
csr = musb_readw(epio, MUSB_TXCSR);
- if (WARN(retries-- < 1,
+
+ /*
+ * FIXME: sometimes the tx fifo flush failed, it has been
+ * observed during device disconnect on AM335x.
+ *
+ * To reproduce the issue, ensure tx urb(s) are queued when
+ * unplug the usb device which is connected to AM335x usb
+ * host port.
+ *
+ * I found using a usb-ethernet device and running iperf
+ * (client on AM335x) has very high chance to trigger it.
+ *
+ * Better to turn on dev_dbg() in musb_cleanup_urb() with
+ * CPPI enabled to see the issue when aborting the tx channel.
+ */
+ if (dev_WARN_ONCE(musb->controller, retries-- < 1,
"Could not flush host TX%d fifo: csr: %04x\n",
ep->epnum, csr))
return;
- mdelay(1);
}
}
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 1731324..22e8ecb 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -21,7 +21,6 @@
config FSL_USB2_OTG
bool "Freescale USB OTG Transceiver Driver"
depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_OTG_FSM && PM
- select USB_OTG
select USB_PHY
help
Enable this to support Freescale USB OTG transceiver.
@@ -168,8 +167,7 @@
config USB_MV_OTG
tristate "Marvell USB OTG support"
- depends on USB_EHCI_MV && USB_MV_UDC && PM
- select USB_OTG
+ depends on USB_EHCI_MV && USB_MV_UDC && PM && USB_OTG
select USB_PHY
help
Say Y here if you want to build Marvell USB OTG transciever
diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
index 4d863eb..b7536af 100644
--- a/drivers/usb/phy/phy-mxs-usb.c
+++ b/drivers/usb/phy/phy-mxs-usb.c
@@ -452,10 +452,13 @@
struct clk *clk;
struct mxs_phy *mxs_phy;
int ret;
- const struct of_device_id *of_id =
- of_match_device(mxs_phy_dt_ids, &pdev->dev);
+ const struct of_device_id *of_id;
struct device_node *np = pdev->dev.of_node;
+ of_id = of_match_device(mxs_phy_dt_ids, &pdev->dev);
+ if (!of_id)
+ return -ENODEV;
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(base))
diff --git a/drivers/usb/phy/phy-omap-otg.c b/drivers/usb/phy/phy-omap-otg.c
index 1270906..c4bf2de 100644
--- a/drivers/usb/phy/phy-omap-otg.c
+++ b/drivers/usb/phy/phy-omap-otg.c
@@ -105,7 +105,6 @@
extcon = extcon_get_extcon_dev(config->extcon);
if (!extcon)
return -EPROBE_DEFER;
- otg_dev->extcon = extcon;
otg_dev = devm_kzalloc(&pdev->dev, sizeof(*otg_dev), GFP_KERNEL);
if (!otg_dev)
@@ -115,6 +114,7 @@
if (IS_ERR(otg_dev->base))
return PTR_ERR(otg_dev->base);
+ otg_dev->extcon = extcon;
otg_dev->id_nb.notifier_call = omap_otg_id_notifier;
otg_dev->vbus_nb.notifier_call = omap_otg_vbus_notifier;
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 685fef7..f228060 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -161,6 +161,7 @@
#define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_HIGHSPEED 0x9001
#define NOVATELWIRELESS_PRODUCT_E362 0x9010
#define NOVATELWIRELESS_PRODUCT_E371 0x9011
+#define NOVATELWIRELESS_PRODUCT_U620L 0x9022
#define NOVATELWIRELESS_PRODUCT_G2 0xA010
#define NOVATELWIRELESS_PRODUCT_MC551 0xB001
@@ -354,6 +355,7 @@
/* This is the 4G XS Stick W14 a.k.a. Mobilcom Debitel Surf-Stick *
* It seems to contain a Qualcomm QSC6240/6290 chipset */
#define FOUR_G_SYSTEMS_PRODUCT_W14 0x9603
+#define FOUR_G_SYSTEMS_PRODUCT_W100 0x9b01
/* iBall 3.5G connect wireless modem */
#define IBALL_3_5G_CONNECT 0x9605
@@ -519,6 +521,11 @@
.sendsetup = BIT(0) | BIT(1),
};
+static const struct option_blacklist_info four_g_w100_blacklist = {
+ .sendsetup = BIT(1) | BIT(2),
+ .reserved = BIT(3),
+};
+
static const struct option_blacklist_info alcatel_x200_blacklist = {
.sendsetup = BIT(0) | BIT(1),
.reserved = BIT(4),
@@ -1052,6 +1059,7 @@
{ USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC551, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_E362, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_E371, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U620L, 0xff, 0x00, 0x00) },
{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) },
{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) },
@@ -1641,6 +1649,9 @@
{ USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14),
.driver_info = (kernel_ulong_t)&four_g_w14_blacklist
},
+ { USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W100),
+ .driver_info = (kernel_ulong_t)&four_g_w100_blacklist
+ },
{ USB_DEVICE_INTERFACE_CLASS(LONGCHEER_VENDOR_ID, SPEEDUP_PRODUCT_SU9800, 0xff) },
{ USB_DEVICE(LONGCHEER_VENDOR_ID, ZOOM_PRODUCT_4597) },
{ USB_DEVICE(LONGCHEER_VENDOR_ID, IBALL_3_5G_CONNECT) },
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 5022fcf..9919d2a 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -22,6 +22,8 @@
#define DRIVER_AUTHOR "Qualcomm Inc"
#define DRIVER_DESC "Qualcomm USB Serial driver"
+#define QUECTEL_EC20_PID 0x9215
+
/* standard device layouts supported by this driver */
enum qcserial_layouts {
QCSERIAL_G2K = 0, /* Gobi 2000 */
@@ -171,6 +173,38 @@
};
MODULE_DEVICE_TABLE(usb, id_table);
+static int handle_quectel_ec20(struct device *dev, int ifnum)
+{
+ int altsetting = 0;
+
+ /*
+ * Quectel EC20 Mini PCIe LTE module layout:
+ * 0: DM/DIAG (use libqcdm from ModemManager for communication)
+ * 1: NMEA
+ * 2: AT-capable modem port
+ * 3: Modem interface
+ * 4: NDIS
+ */
+ switch (ifnum) {
+ case 0:
+ dev_dbg(dev, "Quectel EC20 DM/DIAG interface found\n");
+ break;
+ case 1:
+ dev_dbg(dev, "Quectel EC20 NMEA GPS interface found\n");
+ break;
+ case 2:
+ case 3:
+ dev_dbg(dev, "Quectel EC20 Modem port found\n");
+ break;
+ case 4:
+ /* Don't claim the QMI/net interface */
+ altsetting = -1;
+ break;
+ }
+
+ return altsetting;
+}
+
static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
{
struct usb_host_interface *intf = serial->interface->cur_altsetting;
@@ -181,6 +215,10 @@
int altsetting = -1;
bool sendsetup = false;
+ /* we only support vendor specific functions */
+ if (intf->desc.bInterfaceClass != USB_CLASS_VENDOR_SPEC)
+ goto done;
+
nintf = serial->dev->actconfig->desc.bNumInterfaces;
dev_dbg(dev, "Num Interfaces = %d\n", nintf);
ifnum = intf->desc.bInterfaceNumber;
@@ -240,6 +278,12 @@
altsetting = -1;
break;
case QCSERIAL_G2K:
+ /* handle non-standard layouts */
+ if (nintf == 5 && id->idProduct == QUECTEL_EC20_PID) {
+ altsetting = handle_quectel_ec20(dev, ifnum);
+ goto done;
+ }
+
/*
* Gobi 2K+ USB layout:
* 0: QMI/net
@@ -301,29 +345,39 @@
break;
case QCSERIAL_HWI:
/*
- * Huawei layout:
- * 0: AT-capable modem port
- * 1: DM/DIAG
- * 2: AT-capable modem port
- * 3: CCID-compatible PCSC interface
- * 4: QMI/net
- * 5: NMEA
+ * Huawei devices map functions by subclass + protocol
+ * instead of interface numbers. The protocol identify
+ * a specific function, while the subclass indicate a
+ * specific firmware source
+ *
+ * This is a blacklist of functions known to be
+ * non-serial. The rest are assumed to be serial and
+ * will be handled by this driver
*/
- switch (ifnum) {
- case 0:
- case 2:
- dev_dbg(dev, "Modem port found\n");
- break;
- case 1:
- dev_dbg(dev, "DM/DIAG interface found\n");
- break;
- case 5:
- dev_dbg(dev, "NMEA GPS interface found\n");
- break;
- default:
- /* don't claim any unsupported interface */
+ switch (intf->desc.bInterfaceProtocol) {
+ /* QMI combined (qmi_wwan) */
+ case 0x07:
+ case 0x37:
+ case 0x67:
+ /* QMI data (qmi_wwan) */
+ case 0x08:
+ case 0x38:
+ case 0x68:
+ /* QMI control (qmi_wwan) */
+ case 0x09:
+ case 0x39:
+ case 0x69:
+ /* NCM like (huawei_cdc_ncm) */
+ case 0x16:
+ case 0x46:
+ case 0x76:
altsetting = -1;
break;
+ default:
+ dev_dbg(dev, "Huawei type serial port found (%02x/%02x/%02x)\n",
+ intf->desc.bInterfaceClass,
+ intf->desc.bInterfaceSubClass,
+ intf->desc.bInterfaceProtocol);
}
break;
default:
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index e9da41d..2694df2 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -159,6 +159,7 @@
{ USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STEREO_PLUG_ID) },
{ USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STRIP_PORT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, FRI2_PRODUCT_ID) },
+ { USB_DEVICE(HONEYWELL_VENDOR_ID, HONEYWELL_HGI80_PRODUCT_ID) },
{ } /* terminator */
};
@@ -191,6 +192,7 @@
{ USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) },
{ USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STRIP_PORT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, FRI2_PRODUCT_ID) },
+ { USB_DEVICE(HONEYWELL_VENDOR_ID, HONEYWELL_HGI80_PRODUCT_ID) },
{ } /* terminator */
};
diff --git a/drivers/usb/serial/ti_usb_3410_5052.h b/drivers/usb/serial/ti_usb_3410_5052.h
index 4a2423e..98f35c6 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.h
+++ b/drivers/usb/serial/ti_usb_3410_5052.h
@@ -56,6 +56,10 @@
#define ABBOTT_PRODUCT_ID ABBOTT_STEREO_PLUG_ID
#define ABBOTT_STRIP_PORT_ID 0x3420
+/* Honeywell vendor and product IDs */
+#define HONEYWELL_VENDOR_ID 0x10ac
+#define HONEYWELL_HGI80_PRODUCT_ID 0x0102 /* Honeywell HGI80 */
+
/* Commands */
#define TI_GET_VERSION 0x01
#define TI_GET_PORT_STATUS 0x02
diff --git a/fs/Kconfig b/fs/Kconfig
index da3f32f..6ce72d8 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -46,6 +46,12 @@
or if unsure, say N. Saying Y will increase the size of the kernel
by about 5kB.
+config FS_DAX_PMD
+ bool
+ default FS_DAX
+ depends on FS_DAX
+ depends on BROKEN
+
endif # BLOCK
# Posix ACL utility routines
diff --git a/fs/block_dev.c b/fs/block_dev.c
index bb0dfb1..c25639e 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -390,9 +390,17 @@
struct page *page)
{
const struct block_device_operations *ops = bdev->bd_disk->fops;
+ int result = -EOPNOTSUPP;
+
if (!ops->rw_page || bdev_get_integrity(bdev))
- return -EOPNOTSUPP;
- return ops->rw_page(bdev, sector + get_start_sect(bdev), page, READ);
+ return result;
+
+ result = blk_queue_enter(bdev->bd_queue, GFP_KERNEL);
+ if (result)
+ return result;
+ result = ops->rw_page(bdev, sector + get_start_sect(bdev), page, READ);
+ blk_queue_exit(bdev->bd_queue);
+ return result;
}
EXPORT_SYMBOL_GPL(bdev_read_page);
@@ -421,14 +429,20 @@
int result;
int rw = (wbc->sync_mode == WB_SYNC_ALL) ? WRITE_SYNC : WRITE;
const struct block_device_operations *ops = bdev->bd_disk->fops;
+
if (!ops->rw_page || bdev_get_integrity(bdev))
return -EOPNOTSUPP;
+ result = blk_queue_enter(bdev->bd_queue, GFP_KERNEL);
+ if (result)
+ return result;
+
set_page_writeback(page);
result = ops->rw_page(bdev, sector + get_start_sect(bdev), page, rw);
if (result)
end_page_writeback(page);
else
unlock_page(page);
+ blk_queue_exit(bdev->bd_queue);
return result;
}
EXPORT_SYMBOL_GPL(bdev_write_page);
diff --git a/fs/dax.c b/fs/dax.c
index d1e5cb7..43671b6 100644
--- a/fs/dax.c
+++ b/fs/dax.c
@@ -541,6 +541,10 @@
unsigned long pfn;
int result = 0;
+ /* dax pmd mappings are broken wrt gup and fork */
+ if (!IS_ENABLED(CONFIG_FS_DAX_PMD))
+ return VM_FAULT_FALLBACK;
+
/* Fall back to PTEs if we're going to COW */
if (write && !(vma->vm_flags & VM_SHARED))
return VM_FAULT_FALLBACK;
diff --git a/fs/ext2/super.c b/fs/ext2/super.c
index 3a71cea..748d35a 100644
--- a/fs/ext2/super.c
+++ b/fs/ext2/super.c
@@ -569,6 +569,8 @@
/* Fall through */
case Opt_dax:
#ifdef CONFIG_FS_DAX
+ ext2_msg(sb, KERN_WARNING,
+ "DAX enabled. Warning: EXPERIMENTAL, use at your own risk");
set_opt(sbi->s_mount_opt, DAX);
#else
ext2_msg(sb, KERN_INFO, "dax option not supported");
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 753f4e6..c9ab67d 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -1664,8 +1664,12 @@
}
sbi->s_jquota_fmt = m->mount_opt;
#endif
-#ifndef CONFIG_FS_DAX
} else if (token == Opt_dax) {
+#ifdef CONFIG_FS_DAX
+ ext4_msg(sb, KERN_WARNING,
+ "DAX enabled. Warning: EXPERIMENTAL, use at your own risk");
+ sbi->s_mount_opt |= m->mount_opt;
+#else
ext4_msg(sb, KERN_INFO, "dax option not supported");
return -1;
#endif
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 3fe27f8..c0d2b79 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -794,6 +794,8 @@
extern int sg_scsi_ioctl(struct request_queue *, struct gendisk *, fmode_t,
struct scsi_ioctl_command __user *);
+extern int blk_queue_enter(struct request_queue *q, gfp_t gfp);
+extern void blk_queue_exit(struct request_queue *q);
extern void blk_start_queue(struct request_queue *q);
extern void blk_stop_queue(struct request_queue *q);
extern void blk_sync_queue(struct request_queue *q);
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 5b04b0a..5e31f1b 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -607,7 +607,7 @@
/* tty_audit.c */
#ifdef CONFIG_AUDIT
-extern void tty_audit_add_data(struct tty_struct *tty, unsigned char *data,
+extern void tty_audit_add_data(struct tty_struct *tty, const void *data,
size_t size, unsigned icanon);
extern void tty_audit_exit(void);
extern void tty_audit_fork(struct signal_struct *sig);
@@ -615,8 +615,8 @@
extern void tty_audit_push(struct tty_struct *tty);
extern int tty_audit_push_current(void);
#else
-static inline void tty_audit_add_data(struct tty_struct *tty,
- unsigned char *data, size_t size, unsigned icanon)
+static inline void tty_audit_add_data(struct tty_struct *tty, const void *data,
+ size_t size, unsigned icanon)
{
}
static inline void tty_audit_tiocsti(struct tty_struct *tty, char ch)
diff --git a/mm/memory.c b/mm/memory.c
index deb679c..c387430 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -3015,9 +3015,9 @@
} else {
/*
* The fault handler has no page to lock, so it holds
- * i_mmap_lock for write to protect against truncate.
+ * i_mmap_lock for read to protect against truncate.
*/
- i_mmap_unlock_write(vma->vm_file->f_mapping);
+ i_mmap_unlock_read(vma->vm_file->f_mapping);
}
goto uncharge_out;
}
@@ -3031,9 +3031,9 @@
} else {
/*
* The fault handler has no page to lock, so it holds
- * i_mmap_lock for write to protect against truncate.
+ * i_mmap_lock for read to protect against truncate.
*/
- i_mmap_unlock_write(vma->vm_file->f_mapping);
+ i_mmap_unlock_read(vma->vm_file->f_mapping);
}
return ret;
uncharge_out:
diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index 125b906..638a38e 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -2711,7 +2711,7 @@
# generate a sequence of code that will splice in highlighting information
# using the s// operator.
-foreach my $k (keys @highlights) {
+for (my $k = 0; $k < @highlights; $k++) {
my $pattern = $highlights[$k][0];
my $result = $highlights[$k][1];
# print STDERR "scanning pattern:$pattern, highlight:($result)\n";
diff --git a/tools/Makefile b/tools/Makefile
index d6f307d..7dc820a 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -32,6 +32,10 @@
@echo ' from the kernel command line to build and install one of'
@echo ' the tools above'
@echo ''
+ @echo ' $$ make tools/all'
+ @echo ''
+ @echo ' builds all tools.'
+ @echo ''
@echo ' $$ make tools/install'
@echo ''
@echo ' installs all tools.'
@@ -77,6 +81,11 @@
freefall: FORCE
$(call descend,laptop/$@)
+all: acpi cgroup cpupower hv firewire lguest \
+ perf selftests turbostat usb \
+ virtio vm net x86_energy_perf_policy \
+ tmon freefall
+
acpi_install:
$(call descend,power/$(@:_install=),install)
@@ -101,7 +110,7 @@
install: acpi_install cgroup_install cpupower_install hv_install firewire_install lguest_install \
perf_install selftests_install turbostat_install usb_install \
virtio_install vm_install net_install x86_energy_perf_policy_install \
- tmon freefall_install
+ tmon_install freefall_install
acpi_clean:
$(call descend,power/acpi,clean)
diff --git a/tools/perf/builtin-inject.c b/tools/perf/builtin-inject.c
index 0a945d2..99d127f 100644
--- a/tools/perf/builtin-inject.c
+++ b/tools/perf/builtin-inject.c
@@ -675,6 +675,7 @@
.fork = perf_event__repipe,
.exit = perf_event__repipe,
.lost = perf_event__repipe,
+ .lost_samples = perf_event__repipe,
.aux = perf_event__repipe,
.itrace_start = perf_event__repipe,
.context_switch = perf_event__repipe,
diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c
index 2853ad2..f256fac 100644
--- a/tools/perf/builtin-report.c
+++ b/tools/perf/builtin-report.c
@@ -44,7 +44,7 @@
struct report {
struct perf_tool tool;
struct perf_session *session;
- bool force, use_tui, use_gtk, use_stdio;
+ bool use_tui, use_gtk, use_stdio;
bool hide_unresolved;
bool dont_use_callchains;
bool show_full_info;
@@ -678,7 +678,7 @@
"file", "vmlinux pathname"),
OPT_STRING(0, "kallsyms", &symbol_conf.kallsyms_name,
"file", "kallsyms pathname"),
- OPT_BOOLEAN('f', "force", &report.force, "don't complain, do it"),
+ OPT_BOOLEAN('f', "force", &symbol_conf.force, "don't complain, do it"),
OPT_BOOLEAN('m', "modules", &symbol_conf.use_modules,
"load module symbols - WARNING: use only with -k and LIVE kernel"),
OPT_BOOLEAN('n', "show-nr-samples", &symbol_conf.show_nr_samples,
@@ -832,7 +832,7 @@
}
file.path = input_name;
- file.force = report.force;
+ file.force = symbol_conf.force;
repeat:
session = perf_session__new(&file, false, &report.tool);
diff --git a/tools/perf/ui/browsers/hists.c b/tools/perf/ui/browsers/hists.c
index e5afb89..fa9eb92 100644
--- a/tools/perf/ui/browsers/hists.c
+++ b/tools/perf/ui/browsers/hists.c
@@ -1430,7 +1430,6 @@
struct popup_action {
struct thread *thread;
- struct dso *dso;
struct map_symbol ms;
int socket;
@@ -1565,7 +1564,6 @@
return 0;
act->ms.map = map;
- act->dso = map->dso;
act->fn = do_zoom_dso;
return 1;
}
@@ -1827,7 +1825,6 @@
while (1) {
struct thread *thread = NULL;
- struct dso *dso = NULL;
struct map *map = NULL;
int choice = 0;
int socked_id = -1;
@@ -1839,8 +1836,6 @@
if (browser->he_selection != NULL) {
thread = hist_browser__selected_thread(browser);
map = browser->selection->map;
- if (map)
- dso = map->dso;
socked_id = browser->he_selection->socket;
}
switch (key) {
@@ -1874,7 +1869,7 @@
hist_browser__dump(browser);
continue;
case 'd':
- actions->dso = dso;
+ actions->ms.map = map;
do_zoom_dso(browser, actions);
continue;
case 'V':
diff --git a/tools/perf/util/build-id.c b/tools/perf/util/build-id.c
index d909459..217b5a6 100644
--- a/tools/perf/util/build-id.c
+++ b/tools/perf/util/build-id.c
@@ -76,6 +76,7 @@
.exit = perf_event__exit_del_thread,
.attr = perf_event__process_attr,
.build_id = perf_event__process_build_id,
+ .ordered_events = true,
};
int build_id__sprintf(const u8 *build_id, int len, char *bf)
diff --git a/tools/perf/util/dso.c b/tools/perf/util/dso.c
index 7c0c083..425df5c 100644
--- a/tools/perf/util/dso.c
+++ b/tools/perf/util/dso.c
@@ -933,6 +933,7 @@
/* Add new node and rebalance tree */
rb_link_node(&dso->rb_node, parent, p);
rb_insert_color(&dso->rb_node, root);
+ dso->root = root;
}
return NULL;
}
@@ -945,15 +946,30 @@
void dso__set_long_name(struct dso *dso, const char *name, bool name_allocated)
{
+ struct rb_root *root = dso->root;
+
if (name == NULL)
return;
if (dso->long_name_allocated)
free((char *)dso->long_name);
+ if (root) {
+ rb_erase(&dso->rb_node, root);
+ /*
+ * __dso__findlink_by_longname() isn't guaranteed to add it
+ * back, so a clean removal is required here.
+ */
+ RB_CLEAR_NODE(&dso->rb_node);
+ dso->root = NULL;
+ }
+
dso->long_name = name;
dso->long_name_len = strlen(name);
dso->long_name_allocated = name_allocated;
+
+ if (root)
+ __dso__findlink_by_longname(root, dso, NULL);
}
void dso__set_short_name(struct dso *dso, const char *name, bool name_allocated)
@@ -1046,6 +1062,7 @@
dso->kernel = DSO_TYPE_USER;
dso->needs_swap = DSO_SWAP__UNSET;
RB_CLEAR_NODE(&dso->rb_node);
+ dso->root = NULL;
INIT_LIST_HEAD(&dso->node);
INIT_LIST_HEAD(&dso->data.open_entry);
pthread_mutex_init(&dso->lock, NULL);
diff --git a/tools/perf/util/dso.h b/tools/perf/util/dso.h
index fc8db9c..45ec4d0 100644
--- a/tools/perf/util/dso.h
+++ b/tools/perf/util/dso.h
@@ -135,6 +135,7 @@
pthread_mutex_t lock;
struct list_head node;
struct rb_node rb_node; /* rbtree node sorted by long name */
+ struct rb_root *root; /* root of rbtree that rb_node is in */
struct rb_root symbols[MAP__NR_TYPES];
struct rb_root symbol_names[MAP__NR_TYPES];
struct {
diff --git a/tools/perf/util/machine.c b/tools/perf/util/machine.c
index 5ef90be..8b303ff 100644
--- a/tools/perf/util/machine.c
+++ b/tools/perf/util/machine.c
@@ -91,6 +91,7 @@
list_for_each_entry_safe(pos, n, &dsos->head, node) {
RB_CLEAR_NODE(&pos->rb_node);
+ pos->root = NULL;
list_del_init(&pos->node);
dso__put(pos);
}
diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c
index bd8f03d..05012bb 100644
--- a/tools/perf/util/probe-finder.c
+++ b/tools/perf/util/probe-finder.c
@@ -1183,7 +1183,7 @@
container_of(pf, struct trace_event_finder, pf);
struct perf_probe_point *pp = &pf->pev->point;
struct probe_trace_event *tev;
- struct perf_probe_arg *args;
+ struct perf_probe_arg *args = NULL;
int ret, i;
/* Check number of tevs */
@@ -1198,19 +1198,23 @@
ret = convert_to_trace_point(&pf->sp_die, tf->mod, pf->addr,
pp->retprobe, pp->function, &tev->point);
if (ret < 0)
- return ret;
+ goto end;
tev->point.realname = strdup(dwarf_diename(sc_die));
- if (!tev->point.realname)
- return -ENOMEM;
+ if (!tev->point.realname) {
+ ret = -ENOMEM;
+ goto end;
+ }
pr_debug("Probe point found: %s+%lu\n", tev->point.symbol,
tev->point.offset);
/* Expand special probe argument if exist */
args = zalloc(sizeof(struct perf_probe_arg) * MAX_PROBE_ARGS);
- if (args == NULL)
- return -ENOMEM;
+ if (args == NULL) {
+ ret = -ENOMEM;
+ goto end;
+ }
ret = expand_probe_args(sc_die, pf, args);
if (ret < 0)
@@ -1234,6 +1238,10 @@
}
end:
+ if (ret) {
+ clear_probe_trace_event(tev);
+ tf->ntevs--;
+ }
free(args);
return ret;
}
@@ -1246,7 +1254,7 @@
struct trace_event_finder tf = {
.pf = {.pev = pev, .callback = add_probe_trace_event},
.max_tevs = probe_conf.max_probes, .mod = dbg->mod};
- int ret;
+ int ret, i;
/* Allocate result tevs array */
*tevs = zalloc(sizeof(struct probe_trace_event) * tf.max_tevs);
@@ -1258,6 +1266,8 @@
ret = debuginfo__find_probes(dbg, &tf.pf);
if (ret < 0) {
+ for (i = 0; i < tf.ntevs; i++)
+ clear_probe_trace_event(&tf.tevs[i]);
zfree(tevs);
return ret;
}
diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
index b4cc766..cd08027 100644
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -654,19 +654,24 @@
struct map_groups *kmaps = map__kmaps(map);
struct map *curr_map;
struct symbol *pos;
- int count = 0, moved = 0;
+ int count = 0;
+ struct rb_root old_root = dso->symbols[map->type];
struct rb_root *root = &dso->symbols[map->type];
struct rb_node *next = rb_first(root);
if (!kmaps)
return -1;
+ *root = RB_ROOT;
+
while (next) {
char *module;
pos = rb_entry(next, struct symbol, rb_node);
next = rb_next(&pos->rb_node);
+ rb_erase_init(&pos->rb_node, &old_root);
+
module = strchr(pos->name, '\t');
if (module)
*module = '\0';
@@ -674,28 +679,21 @@
curr_map = map_groups__find(kmaps, map->type, pos->start);
if (!curr_map || (filter && filter(curr_map, pos))) {
- rb_erase_init(&pos->rb_node, root);
symbol__delete(pos);
- } else {
- pos->start -= curr_map->start - curr_map->pgoff;
- if (pos->end)
- pos->end -= curr_map->start - curr_map->pgoff;
- if (curr_map->dso != map->dso) {
- rb_erase_init(&pos->rb_node, root);
- symbols__insert(
- &curr_map->dso->symbols[curr_map->type],
- pos);
- ++moved;
- } else {
- ++count;
- }
+ continue;
}
+
+ pos->start -= curr_map->start - curr_map->pgoff;
+ if (pos->end)
+ pos->end -= curr_map->start - curr_map->pgoff;
+ symbols__insert(&curr_map->dso->symbols[curr_map->type], pos);
+ ++count;
}
/* Symbols have been adjusted */
dso->adjust_symbols = 1;
- return count + moved;
+ return count;
}
/*
@@ -1438,9 +1436,9 @@
if (lstat(dso->name, &st) < 0)
goto out;
- if (st.st_uid && (st.st_uid != geteuid())) {
+ if (!symbol_conf.force && st.st_uid && (st.st_uid != geteuid())) {
pr_warning("File %s not owned by current user or root, "
- "ignoring it.\n", dso->name);
+ "ignoring it (use -f to override).\n", dso->name);
goto out;
}
diff --git a/tools/perf/util/symbol.h b/tools/perf/util/symbol.h
index 40073c6..dcd786e 100644
--- a/tools/perf/util/symbol.h
+++ b/tools/perf/util/symbol.h
@@ -84,6 +84,7 @@
unsigned short priv_size;
unsigned short nr_events;
bool try_vmlinux_path,
+ force,
ignore_vmlinux,
ignore_vmlinux_buildid,
show_kernel_path,
