|  | /* | 
|  | * tps62360.c -- TI tps62360 | 
|  | * | 
|  | * Driver for processor core supply tps62360, tps62361B, tps62362 and tps62363. | 
|  | * | 
|  | * Copyright (c) 2012, NVIDIA Corporation. | 
|  | * | 
|  | * Author: Laxman Dewangan <ldewangan@nvidia.com> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License as | 
|  | * published by the Free Software Foundation version 2. | 
|  | * | 
|  | * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind, | 
|  | * whether express or implied; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
|  | * General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA | 
|  | * 02111-1307, USA | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/of_device.h> | 
|  | #include <linux/of_gpio.h> | 
|  | #include <linux/regulator/of_regulator.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/regulator/driver.h> | 
|  | #include <linux/regulator/machine.h> | 
|  | #include <linux/regulator/tps62360.h> | 
|  | #include <linux/gpio.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/regmap.h> | 
|  |  | 
|  | /* Register definitions */ | 
|  | #define REG_VSET0		0 | 
|  | #define REG_VSET1		1 | 
|  | #define REG_VSET2		2 | 
|  | #define REG_VSET3		3 | 
|  | #define REG_CONTROL		4 | 
|  | #define REG_TEMP		5 | 
|  | #define REG_RAMPCTRL		6 | 
|  | #define REG_CHIPID		8 | 
|  |  | 
|  | #define FORCE_PWM_ENABLE	BIT(7) | 
|  |  | 
|  | enum chips {TPS62360, TPS62361, TPS62362, TPS62363}; | 
|  |  | 
|  | #define TPS62360_BASE_VOLTAGE	770000 | 
|  | #define TPS62360_N_VOLTAGES	64 | 
|  |  | 
|  | #define TPS62361_BASE_VOLTAGE	500000 | 
|  | #define TPS62361_N_VOLTAGES	128 | 
|  |  | 
|  | /* tps 62360 chip information */ | 
|  | struct tps62360_chip { | 
|  | struct device *dev; | 
|  | struct regulator_desc desc; | 
|  | struct regulator_dev *rdev; | 
|  | struct regmap *regmap; | 
|  | int vsel0_gpio; | 
|  | int vsel1_gpio; | 
|  | u8 voltage_reg_mask; | 
|  | bool en_internal_pulldn; | 
|  | bool en_discharge; | 
|  | bool valid_gpios; | 
|  | int lru_index[4]; | 
|  | int curr_vset_vsel[4]; | 
|  | int curr_vset_id; | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * find_voltage_set_register: Find new voltage configuration register | 
|  | * (VSET) id. | 
|  | * The finding of the new VSET register will be based on the LRU mechanism. | 
|  | * Each VSET register will have different voltage configured . This | 
|  | * Function will look if any of the VSET register have requested voltage set | 
|  | * or not. | 
|  | *     - If it is already there then it will make that register as most | 
|  | *       recently used and return as found so that caller need not to set | 
|  | *       the VSET register but need to set the proper gpios to select this | 
|  | *       VSET register. | 
|  | *     - If requested voltage is not found then it will use the least | 
|  | *       recently mechanism to get new VSET register for new configuration | 
|  | *       and will return not_found so that caller need to set new VSET | 
|  | *       register and then gpios (both). | 
|  | */ | 
|  | static bool find_voltage_set_register(struct tps62360_chip *tps, | 
|  | int req_vsel, int *vset_reg_id) | 
|  | { | 
|  | int i; | 
|  | bool found = false; | 
|  | int new_vset_reg = tps->lru_index[3]; | 
|  | int found_index = 3; | 
|  |  | 
|  | for (i = 0; i < 4; ++i) { | 
|  | if (tps->curr_vset_vsel[tps->lru_index[i]] == req_vsel) { | 
|  | new_vset_reg = tps->lru_index[i]; | 
|  | found_index = i; | 
|  | found = true; | 
|  | goto update_lru_index; | 
|  | } | 
|  | } | 
|  |  | 
|  | update_lru_index: | 
|  | for (i = found_index; i > 0; i--) | 
|  | tps->lru_index[i] = tps->lru_index[i - 1]; | 
|  |  | 
|  | tps->lru_index[0] = new_vset_reg; | 
|  | *vset_reg_id = new_vset_reg; | 
|  | return found; | 
|  | } | 
|  |  | 
|  | static int tps62360_dcdc_get_voltage_sel(struct regulator_dev *dev) | 
|  | { | 
|  | struct tps62360_chip *tps = rdev_get_drvdata(dev); | 
|  | int vsel; | 
|  | unsigned int data; | 
|  | int ret; | 
|  |  | 
|  | ret = regmap_read(tps->regmap, REG_VSET0 + tps->curr_vset_id, &data); | 
|  | if (ret < 0) { | 
|  | dev_err(tps->dev, "%s(): register %d read failed with err %d\n", | 
|  | __func__, REG_VSET0 + tps->curr_vset_id, ret); | 
|  | return ret; | 
|  | } | 
|  | vsel = (int)data & tps->voltage_reg_mask; | 
|  | return vsel; | 
|  | } | 
|  |  | 
|  | static int tps62360_dcdc_set_voltage_sel(struct regulator_dev *dev, | 
|  | unsigned selector) | 
|  | { | 
|  | struct tps62360_chip *tps = rdev_get_drvdata(dev); | 
|  | int ret; | 
|  | bool found = false; | 
|  | int new_vset_id = tps->curr_vset_id; | 
|  |  | 
|  | /* | 
|  | * If gpios are available to select the VSET register then least | 
|  | * recently used register for new configuration. | 
|  | */ | 
|  | if (tps->valid_gpios) | 
|  | found = find_voltage_set_register(tps, selector, &new_vset_id); | 
|  |  | 
|  | if (!found) { | 
|  | ret = regmap_update_bits(tps->regmap, REG_VSET0 + new_vset_id, | 
|  | tps->voltage_reg_mask, selector); | 
|  | if (ret < 0) { | 
|  | dev_err(tps->dev, | 
|  | "%s(): register %d update failed with err %d\n", | 
|  | __func__, REG_VSET0 + new_vset_id, ret); | 
|  | return ret; | 
|  | } | 
|  | tps->curr_vset_id = new_vset_id; | 
|  | tps->curr_vset_vsel[new_vset_id] = selector; | 
|  | } | 
|  |  | 
|  | /* Select proper VSET register vio gpios */ | 
|  | if (tps->valid_gpios) { | 
|  | gpio_set_value_cansleep(tps->vsel0_gpio, new_vset_id & 0x1); | 
|  | gpio_set_value_cansleep(tps->vsel1_gpio, | 
|  | (new_vset_id >> 1) & 0x1); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int tps62360_set_mode(struct regulator_dev *rdev, unsigned int mode) | 
|  | { | 
|  | struct tps62360_chip *tps = rdev_get_drvdata(rdev); | 
|  | int i; | 
|  | int val; | 
|  | int ret; | 
|  |  | 
|  | /* Enable force PWM mode in FAST mode only. */ | 
|  | switch (mode) { | 
|  | case REGULATOR_MODE_FAST: | 
|  | val = FORCE_PWM_ENABLE; | 
|  | break; | 
|  |  | 
|  | case REGULATOR_MODE_NORMAL: | 
|  | val = 0; | 
|  | break; | 
|  |  | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (!tps->valid_gpios) { | 
|  | ret = regmap_update_bits(tps->regmap, | 
|  | REG_VSET0 + tps->curr_vset_id, FORCE_PWM_ENABLE, val); | 
|  | if (ret < 0) | 
|  | dev_err(tps->dev, | 
|  | "%s(): register %d update failed with err %d\n", | 
|  | __func__, REG_VSET0 + tps->curr_vset_id, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* If gpios are valid then all register set need to be control */ | 
|  | for (i = 0; i < 4; ++i) { | 
|  | ret = regmap_update_bits(tps->regmap, | 
|  | REG_VSET0 + i, FORCE_PWM_ENABLE, val); | 
|  | if (ret < 0) { | 
|  | dev_err(tps->dev, | 
|  | "%s(): register %d update failed with err %d\n", | 
|  | __func__, REG_VSET0 + i, ret); | 
|  | return ret; | 
|  | } | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static unsigned int tps62360_get_mode(struct regulator_dev *rdev) | 
|  | { | 
|  | struct tps62360_chip *tps = rdev_get_drvdata(rdev); | 
|  | unsigned int data; | 
|  | int ret; | 
|  |  | 
|  | ret = regmap_read(tps->regmap, REG_VSET0 + tps->curr_vset_id, &data); | 
|  | if (ret < 0) { | 
|  | dev_err(tps->dev, "%s(): register %d read failed with err %d\n", | 
|  | __func__, REG_VSET0 + tps->curr_vset_id, ret); | 
|  | return ret; | 
|  | } | 
|  | return (data & FORCE_PWM_ENABLE) ? | 
|  | REGULATOR_MODE_FAST : REGULATOR_MODE_NORMAL; | 
|  | } | 
|  |  | 
|  | static const struct regulator_ops tps62360_dcdc_ops = { | 
|  | .get_voltage_sel	= tps62360_dcdc_get_voltage_sel, | 
|  | .set_voltage_sel	= tps62360_dcdc_set_voltage_sel, | 
|  | .list_voltage		= regulator_list_voltage_linear, | 
|  | .map_voltage		= regulator_map_voltage_linear, | 
|  | .set_voltage_time_sel	= regulator_set_voltage_time_sel, | 
|  | .set_mode		= tps62360_set_mode, | 
|  | .get_mode		= tps62360_get_mode, | 
|  | }; | 
|  |  | 
|  | static int tps62360_init_dcdc(struct tps62360_chip *tps, | 
|  | struct tps62360_regulator_platform_data *pdata) | 
|  | { | 
|  | int ret; | 
|  | unsigned int ramp_ctrl; | 
|  |  | 
|  | /* Initialize internal pull up/down control */ | 
|  | if (tps->en_internal_pulldn) | 
|  | ret = regmap_write(tps->regmap, REG_CONTROL, 0xE0); | 
|  | else | 
|  | ret = regmap_write(tps->regmap, REG_CONTROL, 0x0); | 
|  | if (ret < 0) { | 
|  | dev_err(tps->dev, | 
|  | "%s(): register %d write failed with err %d\n", | 
|  | __func__, REG_CONTROL, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* Reset output discharge path to reduce power consumption */ | 
|  | ret = regmap_update_bits(tps->regmap, REG_RAMPCTRL, BIT(2), 0); | 
|  | if (ret < 0) { | 
|  | dev_err(tps->dev, | 
|  | "%s(): register %d update failed with err %d\n", | 
|  | __func__, REG_RAMPCTRL, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* Get ramp value from ramp control register */ | 
|  | ret = regmap_read(tps->regmap, REG_RAMPCTRL, &ramp_ctrl); | 
|  | if (ret < 0) { | 
|  | dev_err(tps->dev, | 
|  | "%s(): register %d read failed with err %d\n", | 
|  | __func__, REG_RAMPCTRL, ret); | 
|  | return ret; | 
|  | } | 
|  | ramp_ctrl = (ramp_ctrl >> 5) & 0x7; | 
|  |  | 
|  | /* ramp mV/us = 32/(2^ramp_ctrl) */ | 
|  | tps->desc.ramp_delay = DIV_ROUND_UP(32000, BIT(ramp_ctrl)); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static const struct regmap_config tps62360_regmap_config = { | 
|  | .reg_bits		= 8, | 
|  | .val_bits		= 8, | 
|  | .max_register		= REG_CHIPID, | 
|  | .cache_type		= REGCACHE_RBTREE, | 
|  | }; | 
|  |  | 
|  | static struct tps62360_regulator_platform_data * | 
|  | of_get_tps62360_platform_data(struct device *dev, | 
|  | const struct regulator_desc *desc) | 
|  | { | 
|  | struct tps62360_regulator_platform_data *pdata; | 
|  | struct device_node *np = dev->of_node; | 
|  |  | 
|  | pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); | 
|  | if (!pdata) | 
|  | return NULL; | 
|  |  | 
|  | pdata->reg_init_data = of_get_regulator_init_data(dev, dev->of_node, | 
|  | desc); | 
|  | if (!pdata->reg_init_data) { | 
|  | dev_err(dev, "Not able to get OF regulator init data\n"); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | pdata->vsel0_gpio = of_get_named_gpio(np, "vsel0-gpio", 0); | 
|  | pdata->vsel1_gpio = of_get_named_gpio(np, "vsel1-gpio", 0); | 
|  |  | 
|  | if (of_find_property(np, "ti,vsel0-state-high", NULL)) | 
|  | pdata->vsel0_def_state = 1; | 
|  |  | 
|  | if (of_find_property(np, "ti,vsel1-state-high", NULL)) | 
|  | pdata->vsel1_def_state = 1; | 
|  |  | 
|  | if (of_find_property(np, "ti,enable-pull-down", NULL)) | 
|  | pdata->en_internal_pulldn = true; | 
|  |  | 
|  | if (of_find_property(np, "ti,enable-vout-discharge", NULL)) | 
|  | pdata->en_discharge = true; | 
|  |  | 
|  | return pdata; | 
|  | } | 
|  |  | 
|  | #if defined(CONFIG_OF) | 
|  | static const struct of_device_id tps62360_of_match[] = { | 
|  | { .compatible = "ti,tps62360", .data = (void *)TPS62360}, | 
|  | { .compatible = "ti,tps62361", .data = (void *)TPS62361}, | 
|  | { .compatible = "ti,tps62362", .data = (void *)TPS62362}, | 
|  | { .compatible = "ti,tps62363", .data = (void *)TPS62363}, | 
|  | {}, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, tps62360_of_match); | 
|  | #endif | 
|  |  | 
|  | static int tps62360_probe(struct i2c_client *client, | 
|  | const struct i2c_device_id *id) | 
|  | { | 
|  | struct regulator_config config = { }; | 
|  | struct tps62360_regulator_platform_data *pdata; | 
|  | struct regulator_dev *rdev; | 
|  | struct tps62360_chip *tps; | 
|  | int ret; | 
|  | int i; | 
|  | int chip_id; | 
|  |  | 
|  | pdata = dev_get_platdata(&client->dev); | 
|  |  | 
|  | tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL); | 
|  | if (!tps) | 
|  | return -ENOMEM; | 
|  |  | 
|  | tps->desc.name = client->name; | 
|  | tps->desc.id = 0; | 
|  | tps->desc.ops = &tps62360_dcdc_ops; | 
|  | tps->desc.type = REGULATOR_VOLTAGE; | 
|  | tps->desc.owner = THIS_MODULE; | 
|  | tps->desc.uV_step = 10000; | 
|  |  | 
|  | if (client->dev.of_node) { | 
|  | const struct of_device_id *match; | 
|  | match = of_match_device(of_match_ptr(tps62360_of_match), | 
|  | &client->dev); | 
|  | if (!match) { | 
|  | dev_err(&client->dev, "Error: No device match found\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  | chip_id = (int)(long)match->data; | 
|  | if (!pdata) | 
|  | pdata = of_get_tps62360_platform_data(&client->dev, | 
|  | &tps->desc); | 
|  | } else if (id) { | 
|  | chip_id = id->driver_data; | 
|  | } else { | 
|  | dev_err(&client->dev, "No device tree match or id table match found\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | if (!pdata) { | 
|  | dev_err(&client->dev, "%s(): Platform data not found\n", | 
|  | __func__); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | tps->en_discharge = pdata->en_discharge; | 
|  | tps->en_internal_pulldn = pdata->en_internal_pulldn; | 
|  | tps->vsel0_gpio = pdata->vsel0_gpio; | 
|  | tps->vsel1_gpio = pdata->vsel1_gpio; | 
|  | tps->dev = &client->dev; | 
|  |  | 
|  | switch (chip_id) { | 
|  | case TPS62360: | 
|  | case TPS62362: | 
|  | tps->desc.min_uV = TPS62360_BASE_VOLTAGE; | 
|  | tps->voltage_reg_mask = 0x3F; | 
|  | tps->desc.n_voltages = TPS62360_N_VOLTAGES; | 
|  | break; | 
|  | case TPS62361: | 
|  | case TPS62363: | 
|  | tps->desc.min_uV = TPS62361_BASE_VOLTAGE; | 
|  | tps->voltage_reg_mask = 0x7F; | 
|  | tps->desc.n_voltages = TPS62361_N_VOLTAGES; | 
|  | break; | 
|  | default: | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | tps->regmap = devm_regmap_init_i2c(client, &tps62360_regmap_config); | 
|  | if (IS_ERR(tps->regmap)) { | 
|  | ret = PTR_ERR(tps->regmap); | 
|  | dev_err(&client->dev, | 
|  | "%s(): regmap allocation failed with err %d\n", | 
|  | __func__, ret); | 
|  | return ret; | 
|  | } | 
|  | i2c_set_clientdata(client, tps); | 
|  |  | 
|  | tps->curr_vset_id = (pdata->vsel1_def_state & 1) * 2 + | 
|  | (pdata->vsel0_def_state & 1); | 
|  | tps->lru_index[0] = tps->curr_vset_id; | 
|  | tps->valid_gpios = false; | 
|  |  | 
|  | if (gpio_is_valid(tps->vsel0_gpio) && gpio_is_valid(tps->vsel1_gpio)) { | 
|  | int gpio_flags; | 
|  | gpio_flags = (pdata->vsel0_def_state) ? | 
|  | GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; | 
|  | ret = devm_gpio_request_one(&client->dev, tps->vsel0_gpio, | 
|  | gpio_flags, "tps62360-vsel0"); | 
|  | if (ret) { | 
|  | dev_err(&client->dev, | 
|  | "%s(): Could not obtain vsel0 GPIO %d: %d\n", | 
|  | __func__, tps->vsel0_gpio, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | gpio_flags = (pdata->vsel1_def_state) ? | 
|  | GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; | 
|  | ret = devm_gpio_request_one(&client->dev, tps->vsel1_gpio, | 
|  | gpio_flags, "tps62360-vsel1"); | 
|  | if (ret) { | 
|  | dev_err(&client->dev, | 
|  | "%s(): Could not obtain vsel1 GPIO %d: %d\n", | 
|  | __func__, tps->vsel1_gpio, ret); | 
|  | return ret; | 
|  | } | 
|  | tps->valid_gpios = true; | 
|  |  | 
|  | /* | 
|  | * Initialize the lru index with vset_reg id | 
|  | * The index 0 will be most recently used and | 
|  | * set with the tps->curr_vset_id */ | 
|  | for (i = 0; i < 4; ++i) | 
|  | tps->lru_index[i] = i; | 
|  | tps->lru_index[0] = tps->curr_vset_id; | 
|  | tps->lru_index[tps->curr_vset_id] = 0; | 
|  | } | 
|  |  | 
|  | ret = tps62360_init_dcdc(tps, pdata); | 
|  | if (ret < 0) { | 
|  | dev_err(tps->dev, "%s(): Init failed with err = %d\n", | 
|  | __func__, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | config.dev = &client->dev; | 
|  | config.init_data = pdata->reg_init_data; | 
|  | config.driver_data = tps; | 
|  | config.of_node = client->dev.of_node; | 
|  |  | 
|  | /* Register the regulators */ | 
|  | rdev = devm_regulator_register(&client->dev, &tps->desc, &config); | 
|  | if (IS_ERR(rdev)) { | 
|  | dev_err(tps->dev, | 
|  | "%s(): regulator register failed with err %s\n", | 
|  | __func__, id->name); | 
|  | return PTR_ERR(rdev); | 
|  | } | 
|  |  | 
|  | tps->rdev = rdev; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void tps62360_shutdown(struct i2c_client *client) | 
|  | { | 
|  | struct tps62360_chip *tps = i2c_get_clientdata(client); | 
|  | int st; | 
|  |  | 
|  | if (!tps->en_discharge) | 
|  | return; | 
|  |  | 
|  | /* Configure the output discharge path */ | 
|  | st = regmap_update_bits(tps->regmap, REG_RAMPCTRL, BIT(2), BIT(2)); | 
|  | if (st < 0) | 
|  | dev_err(tps->dev, | 
|  | "%s(): register %d update failed with err %d\n", | 
|  | __func__, REG_RAMPCTRL, st); | 
|  | } | 
|  |  | 
|  | static const struct i2c_device_id tps62360_id[] = { | 
|  | {.name = "tps62360", .driver_data = TPS62360}, | 
|  | {.name = "tps62361", .driver_data = TPS62361}, | 
|  | {.name = "tps62362", .driver_data = TPS62362}, | 
|  | {.name = "tps62363", .driver_data = TPS62363}, | 
|  | {}, | 
|  | }; | 
|  |  | 
|  | MODULE_DEVICE_TABLE(i2c, tps62360_id); | 
|  |  | 
|  | static struct i2c_driver tps62360_i2c_driver = { | 
|  | .driver = { | 
|  | .name = "tps62360", | 
|  | .of_match_table = of_match_ptr(tps62360_of_match), | 
|  | }, | 
|  | .probe = tps62360_probe, | 
|  | .shutdown = tps62360_shutdown, | 
|  | .id_table = tps62360_id, | 
|  | }; | 
|  |  | 
|  | static int __init tps62360_init(void) | 
|  | { | 
|  | return i2c_add_driver(&tps62360_i2c_driver); | 
|  | } | 
|  | subsys_initcall(tps62360_init); | 
|  |  | 
|  | static void __exit tps62360_cleanup(void) | 
|  | { | 
|  | i2c_del_driver(&tps62360_i2c_driver); | 
|  | } | 
|  | module_exit(tps62360_cleanup); | 
|  |  | 
|  | MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>"); | 
|  | MODULE_DESCRIPTION("TPS6236x voltage regulator driver"); | 
|  | MODULE_LICENSE("GPL v2"); |