|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | // | 
|  | // Copyright (c) 2015 MediaTek Inc. | 
|  | // Author: Henry Chen <henryc.chen@mediatek.com> | 
|  |  | 
|  | #include <linux/err.h> | 
|  | #include <linux/gpio.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/regmap.h> | 
|  | #include <linux/regulator/driver.h> | 
|  | #include <linux/regulator/machine.h> | 
|  | #include <linux/regulator/of_regulator.h> | 
|  | #include <linux/regulator/mt6311.h> | 
|  | #include <linux/slab.h> | 
|  | #include "mt6311-regulator.h" | 
|  |  | 
|  | static const struct regmap_config mt6311_regmap_config = { | 
|  | .reg_bits = 8, | 
|  | .val_bits = 8, | 
|  | .max_register = MT6311_FQMTR_CON4, | 
|  | .cache_type = REGCACHE_RBTREE, | 
|  | }; | 
|  |  | 
|  | /* Default limits measured in millivolts and milliamps */ | 
|  | #define MT6311_MIN_UV		600000 | 
|  | #define MT6311_MAX_UV		1393750 | 
|  | #define MT6311_STEP_UV		6250 | 
|  |  | 
|  | static const struct regulator_ops mt6311_buck_ops = { | 
|  | .list_voltage = regulator_list_voltage_linear, | 
|  | .map_voltage = regulator_map_voltage_linear, | 
|  | .set_voltage_sel = regulator_set_voltage_sel_regmap, | 
|  | .get_voltage_sel = regulator_get_voltage_sel_regmap, | 
|  | .set_voltage_time_sel = regulator_set_voltage_time_sel, | 
|  | .enable = regulator_enable_regmap, | 
|  | .disable = regulator_disable_regmap, | 
|  | .is_enabled = regulator_is_enabled_regmap, | 
|  | }; | 
|  |  | 
|  | static const struct regulator_ops mt6311_ldo_ops = { | 
|  | .enable = regulator_enable_regmap, | 
|  | .disable = regulator_disable_regmap, | 
|  | .is_enabled = regulator_is_enabled_regmap, | 
|  | }; | 
|  |  | 
|  | #define MT6311_BUCK(_id) \ | 
|  | {\ | 
|  | .name = #_id,\ | 
|  | .ops = &mt6311_buck_ops,\ | 
|  | .of_match = of_match_ptr(#_id),\ | 
|  | .regulators_node = of_match_ptr("regulators"),\ | 
|  | .type = REGULATOR_VOLTAGE,\ | 
|  | .id = MT6311_ID_##_id,\ | 
|  | .n_voltages = (MT6311_MAX_UV - MT6311_MIN_UV) / MT6311_STEP_UV + 1,\ | 
|  | .min_uV = MT6311_MIN_UV,\ | 
|  | .uV_step = MT6311_STEP_UV,\ | 
|  | .owner = THIS_MODULE,\ | 
|  | .enable_reg = MT6311_VDVFS11_CON9,\ | 
|  | .enable_mask = MT6311_PMIC_VDVFS11_EN_MASK,\ | 
|  | .vsel_reg = MT6311_VDVFS11_CON12,\ | 
|  | .vsel_mask = MT6311_PMIC_VDVFS11_VOSEL_MASK,\ | 
|  | } | 
|  |  | 
|  | #define MT6311_LDO(_id) \ | 
|  | {\ | 
|  | .name = #_id,\ | 
|  | .ops = &mt6311_ldo_ops,\ | 
|  | .of_match = of_match_ptr(#_id),\ | 
|  | .regulators_node = of_match_ptr("regulators"),\ | 
|  | .type = REGULATOR_VOLTAGE,\ | 
|  | .id = MT6311_ID_##_id,\ | 
|  | .owner = THIS_MODULE,\ | 
|  | .enable_reg = MT6311_LDO_CON3,\ | 
|  | .enable_mask = MT6311_PMIC_RG_VBIASN_EN_MASK,\ | 
|  | } | 
|  |  | 
|  | static const struct regulator_desc mt6311_regulators[] = { | 
|  | MT6311_BUCK(VDVFS), | 
|  | MT6311_LDO(VBIASN), | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * I2C driver interface functions | 
|  | */ | 
|  | static int mt6311_i2c_probe(struct i2c_client *i2c) | 
|  | { | 
|  | struct regulator_config config = { }; | 
|  | struct regulator_dev *rdev; | 
|  | struct regmap *regmap; | 
|  | int i, ret; | 
|  | unsigned int data; | 
|  |  | 
|  | regmap = devm_regmap_init_i2c(i2c, &mt6311_regmap_config); | 
|  | if (IS_ERR(regmap)) { | 
|  | ret = PTR_ERR(regmap); | 
|  | dev_err(&i2c->dev, "Failed to allocate register map: %d\n", | 
|  | ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = regmap_read(regmap, MT6311_SWCID, &data); | 
|  | if (ret < 0) { | 
|  | dev_err(&i2c->dev, "Failed to read DEVICE_ID reg: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | switch (data) { | 
|  | case MT6311_E1_CID_CODE: | 
|  | case MT6311_E2_CID_CODE: | 
|  | case MT6311_E3_CID_CODE: | 
|  | break; | 
|  | default: | 
|  | dev_err(&i2c->dev, "Unsupported device id = 0x%x.\n", data); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < MT6311_MAX_REGULATORS; i++) { | 
|  | config.dev = &i2c->dev; | 
|  | config.regmap = regmap; | 
|  |  | 
|  | rdev = devm_regulator_register(&i2c->dev, | 
|  | &mt6311_regulators[i], &config); | 
|  | if (IS_ERR(rdev)) { | 
|  | dev_err(&i2c->dev, | 
|  | "Failed to register MT6311 regulator\n"); | 
|  | return PTR_ERR(rdev); | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct i2c_device_id mt6311_i2c_id[] = { | 
|  | {"mt6311", 0}, | 
|  | {}, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(i2c, mt6311_i2c_id); | 
|  |  | 
|  | #ifdef CONFIG_OF | 
|  | static const struct of_device_id mt6311_dt_ids[] = { | 
|  | { .compatible = "mediatek,mt6311-regulator", | 
|  | .data = &mt6311_i2c_id[0] }, | 
|  | {}, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, mt6311_dt_ids); | 
|  | #endif | 
|  |  | 
|  | static struct i2c_driver mt6311_regulator_driver = { | 
|  | .driver = { | 
|  | .name = "mt6311", | 
|  | .of_match_table = of_match_ptr(mt6311_dt_ids), | 
|  | }, | 
|  | .probe_new = mt6311_i2c_probe, | 
|  | .id_table = mt6311_i2c_id, | 
|  | }; | 
|  |  | 
|  | module_i2c_driver(mt6311_regulator_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Henry Chen <henryc.chen@mediatek.com>"); | 
|  | MODULE_DESCRIPTION("Regulator device driver for Mediatek MT6311"); | 
|  | MODULE_LICENSE("GPL v2"); |