| // SPDX-License-Identifier: GPL-2.0 | 
 | /* | 
 |  * Microchip switch driver main logic | 
 |  * | 
 |  * Copyright (C) 2017-2019 Microchip Technology Inc. | 
 |  */ | 
 |  | 
 | #include <linux/delay.h> | 
 | #include <linux/export.h> | 
 | #include <linux/gpio/consumer.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/module.h> | 
 | #include <linux/platform_data/microchip-ksz.h> | 
 | #include <linux/phy.h> | 
 | #include <linux/etherdevice.h> | 
 | #include <linux/if_bridge.h> | 
 | #include <linux/of_net.h> | 
 | #include <net/dsa.h> | 
 | #include <net/switchdev.h> | 
 |  | 
 | #include "ksz_common.h" | 
 |  | 
 | void ksz_update_port_member(struct ksz_device *dev, int port) | 
 | { | 
 | 	struct ksz_port *p; | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < dev->port_cnt; i++) { | 
 | 		if (i == port || i == dev->cpu_port) | 
 | 			continue; | 
 | 		p = &dev->ports[i]; | 
 | 		if (!(dev->member & (1 << i))) | 
 | 			continue; | 
 |  | 
 | 		/* Port is a member of the bridge and is forwarding. */ | 
 | 		if (p->stp_state == BR_STATE_FORWARDING && | 
 | 		    p->member != dev->member) | 
 | 			dev->dev_ops->cfg_port_member(dev, i, dev->member); | 
 | 	} | 
 | } | 
 | EXPORT_SYMBOL_GPL(ksz_update_port_member); | 
 |  | 
 | static void port_r_cnt(struct ksz_device *dev, int port) | 
 | { | 
 | 	struct ksz_port_mib *mib = &dev->ports[port].mib; | 
 | 	u64 *dropped; | 
 |  | 
 | 	/* Some ports may not have MIB counters before SWITCH_COUNTER_NUM. */ | 
 | 	while (mib->cnt_ptr < dev->reg_mib_cnt) { | 
 | 		dev->dev_ops->r_mib_cnt(dev, port, mib->cnt_ptr, | 
 | 					&mib->counters[mib->cnt_ptr]); | 
 | 		++mib->cnt_ptr; | 
 | 	} | 
 |  | 
 | 	/* last one in storage */ | 
 | 	dropped = &mib->counters[dev->mib_cnt]; | 
 |  | 
 | 	/* Some ports may not have MIB counters after SWITCH_COUNTER_NUM. */ | 
 | 	while (mib->cnt_ptr < dev->mib_cnt) { | 
 | 		dev->dev_ops->r_mib_pkt(dev, port, mib->cnt_ptr, | 
 | 					dropped, &mib->counters[mib->cnt_ptr]); | 
 | 		++mib->cnt_ptr; | 
 | 	} | 
 | 	mib->cnt_ptr = 0; | 
 | } | 
 |  | 
 | static void ksz_mib_read_work(struct work_struct *work) | 
 | { | 
 | 	struct ksz_device *dev = container_of(work, struct ksz_device, | 
 | 					      mib_read.work); | 
 | 	struct ksz_port_mib *mib; | 
 | 	struct ksz_port *p; | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < dev->port_cnt; i++) { | 
 | 		if (dsa_is_unused_port(dev->ds, i)) | 
 | 			continue; | 
 |  | 
 | 		p = &dev->ports[i]; | 
 | 		mib = &p->mib; | 
 | 		mutex_lock(&mib->cnt_mutex); | 
 |  | 
 | 		/* Only read MIB counters when the port is told to do. | 
 | 		 * If not, read only dropped counters when link is not up. | 
 | 		 */ | 
 | 		if (!p->read) { | 
 | 			const struct dsa_port *dp = dsa_to_port(dev->ds, i); | 
 |  | 
 | 			if (!netif_carrier_ok(dp->slave)) | 
 | 				mib->cnt_ptr = dev->reg_mib_cnt; | 
 | 		} | 
 | 		port_r_cnt(dev, i); | 
 | 		p->read = false; | 
 | 		mutex_unlock(&mib->cnt_mutex); | 
 | 	} | 
 |  | 
 | 	schedule_delayed_work(&dev->mib_read, dev->mib_read_interval); | 
 | } | 
 |  | 
 | void ksz_init_mib_timer(struct ksz_device *dev) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	INIT_DELAYED_WORK(&dev->mib_read, ksz_mib_read_work); | 
 |  | 
 | 	for (i = 0; i < dev->port_cnt; i++) | 
 | 		dev->dev_ops->port_init_cnt(dev, i); | 
 | } | 
 | EXPORT_SYMBOL_GPL(ksz_init_mib_timer); | 
 |  | 
 | int ksz_phy_read16(struct dsa_switch *ds, int addr, int reg) | 
 | { | 
 | 	struct ksz_device *dev = ds->priv; | 
 | 	u16 val = 0xffff; | 
 |  | 
 | 	dev->dev_ops->r_phy(dev, addr, reg, &val); | 
 |  | 
 | 	return val; | 
 | } | 
 | EXPORT_SYMBOL_GPL(ksz_phy_read16); | 
 |  | 
 | int ksz_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val) | 
 | { | 
 | 	struct ksz_device *dev = ds->priv; | 
 |  | 
 | 	dev->dev_ops->w_phy(dev, addr, reg, val); | 
 |  | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL_GPL(ksz_phy_write16); | 
 |  | 
 | void ksz_mac_link_down(struct dsa_switch *ds, int port, unsigned int mode, | 
 | 		       phy_interface_t interface) | 
 | { | 
 | 	struct ksz_device *dev = ds->priv; | 
 | 	struct ksz_port *p = &dev->ports[port]; | 
 |  | 
 | 	/* Read all MIB counters when the link is going down. */ | 
 | 	p->read = true; | 
 | 	/* timer started */ | 
 | 	if (dev->mib_read_interval) | 
 | 		schedule_delayed_work(&dev->mib_read, 0); | 
 | } | 
 | EXPORT_SYMBOL_GPL(ksz_mac_link_down); | 
 |  | 
 | int ksz_sset_count(struct dsa_switch *ds, int port, int sset) | 
 | { | 
 | 	struct ksz_device *dev = ds->priv; | 
 |  | 
 | 	if (sset != ETH_SS_STATS) | 
 | 		return 0; | 
 |  | 
 | 	return dev->mib_cnt; | 
 | } | 
 | EXPORT_SYMBOL_GPL(ksz_sset_count); | 
 |  | 
 | void ksz_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *buf) | 
 | { | 
 | 	const struct dsa_port *dp = dsa_to_port(ds, port); | 
 | 	struct ksz_device *dev = ds->priv; | 
 | 	struct ksz_port_mib *mib; | 
 |  | 
 | 	mib = &dev->ports[port].mib; | 
 | 	mutex_lock(&mib->cnt_mutex); | 
 |  | 
 | 	/* Only read dropped counters if no link. */ | 
 | 	if (!netif_carrier_ok(dp->slave)) | 
 | 		mib->cnt_ptr = dev->reg_mib_cnt; | 
 | 	port_r_cnt(dev, port); | 
 | 	memcpy(buf, mib->counters, dev->mib_cnt * sizeof(u64)); | 
 | 	mutex_unlock(&mib->cnt_mutex); | 
 | } | 
 | EXPORT_SYMBOL_GPL(ksz_get_ethtool_stats); | 
 |  | 
 | int ksz_port_bridge_join(struct dsa_switch *ds, int port, | 
 | 			 struct net_device *br) | 
 | { | 
 | 	struct ksz_device *dev = ds->priv; | 
 |  | 
 | 	mutex_lock(&dev->dev_mutex); | 
 | 	dev->br_member |= (1 << port); | 
 | 	mutex_unlock(&dev->dev_mutex); | 
 |  | 
 | 	/* port_stp_state_set() will be called after to put the port in | 
 | 	 * appropriate state so there is no need to do anything. | 
 | 	 */ | 
 |  | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL_GPL(ksz_port_bridge_join); | 
 |  | 
 | void ksz_port_bridge_leave(struct dsa_switch *ds, int port, | 
 | 			   struct net_device *br) | 
 | { | 
 | 	struct ksz_device *dev = ds->priv; | 
 |  | 
 | 	mutex_lock(&dev->dev_mutex); | 
 | 	dev->br_member &= ~(1 << port); | 
 | 	dev->member &= ~(1 << port); | 
 | 	mutex_unlock(&dev->dev_mutex); | 
 |  | 
 | 	/* port_stp_state_set() will be called after to put the port in | 
 | 	 * forwarding state so there is no need to do anything. | 
 | 	 */ | 
 | } | 
 | EXPORT_SYMBOL_GPL(ksz_port_bridge_leave); | 
 |  | 
 | void ksz_port_fast_age(struct dsa_switch *ds, int port) | 
 | { | 
 | 	struct ksz_device *dev = ds->priv; | 
 |  | 
 | 	dev->dev_ops->flush_dyn_mac_table(dev, port); | 
 | } | 
 | EXPORT_SYMBOL_GPL(ksz_port_fast_age); | 
 |  | 
 | int ksz_port_fdb_dump(struct dsa_switch *ds, int port, dsa_fdb_dump_cb_t *cb, | 
 | 		      void *data) | 
 | { | 
 | 	struct ksz_device *dev = ds->priv; | 
 | 	int ret = 0; | 
 | 	u16 i = 0; | 
 | 	u16 entries = 0; | 
 | 	u8 timestamp = 0; | 
 | 	u8 fid; | 
 | 	u8 member; | 
 | 	struct alu_struct alu; | 
 |  | 
 | 	do { | 
 | 		alu.is_static = false; | 
 | 		ret = dev->dev_ops->r_dyn_mac_table(dev, i, alu.mac, &fid, | 
 | 						    &member, ×tamp, | 
 | 						    &entries); | 
 | 		if (!ret && (member & BIT(port))) { | 
 | 			ret = cb(alu.mac, alu.fid, alu.is_static, data); | 
 | 			if (ret) | 
 | 				break; | 
 | 		} | 
 | 		i++; | 
 | 	} while (i < entries); | 
 | 	if (i >= entries) | 
 | 		ret = 0; | 
 |  | 
 | 	return ret; | 
 | } | 
 | EXPORT_SYMBOL_GPL(ksz_port_fdb_dump); | 
 |  | 
 | int ksz_port_mdb_add(struct dsa_switch *ds, int port, | 
 | 		     const struct switchdev_obj_port_mdb *mdb) | 
 | { | 
 | 	struct ksz_device *dev = ds->priv; | 
 | 	struct alu_struct alu; | 
 | 	int index; | 
 | 	int empty = 0; | 
 |  | 
 | 	alu.port_forward = 0; | 
 | 	for (index = 0; index < dev->num_statics; index++) { | 
 | 		if (!dev->dev_ops->r_sta_mac_table(dev, index, &alu)) { | 
 | 			/* Found one already in static MAC table. */ | 
 | 			if (!memcmp(alu.mac, mdb->addr, ETH_ALEN) && | 
 | 			    alu.fid == mdb->vid) | 
 | 				break; | 
 | 		/* Remember the first empty entry. */ | 
 | 		} else if (!empty) { | 
 | 			empty = index + 1; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* no available entry */ | 
 | 	if (index == dev->num_statics && !empty) | 
 | 		return -ENOSPC; | 
 |  | 
 | 	/* add entry */ | 
 | 	if (index == dev->num_statics) { | 
 | 		index = empty - 1; | 
 | 		memset(&alu, 0, sizeof(alu)); | 
 | 		memcpy(alu.mac, mdb->addr, ETH_ALEN); | 
 | 		alu.is_static = true; | 
 | 	} | 
 | 	alu.port_forward |= BIT(port); | 
 | 	if (mdb->vid) { | 
 | 		alu.is_use_fid = true; | 
 |  | 
 | 		/* Need a way to map VID to FID. */ | 
 | 		alu.fid = mdb->vid; | 
 | 	} | 
 | 	dev->dev_ops->w_sta_mac_table(dev, index, &alu); | 
 |  | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL_GPL(ksz_port_mdb_add); | 
 |  | 
 | int ksz_port_mdb_del(struct dsa_switch *ds, int port, | 
 | 		     const struct switchdev_obj_port_mdb *mdb) | 
 | { | 
 | 	struct ksz_device *dev = ds->priv; | 
 | 	struct alu_struct alu; | 
 | 	int index; | 
 | 	int ret = 0; | 
 |  | 
 | 	for (index = 0; index < dev->num_statics; index++) { | 
 | 		if (!dev->dev_ops->r_sta_mac_table(dev, index, &alu)) { | 
 | 			/* Found one already in static MAC table. */ | 
 | 			if (!memcmp(alu.mac, mdb->addr, ETH_ALEN) && | 
 | 			    alu.fid == mdb->vid) | 
 | 				break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* no available entry */ | 
 | 	if (index == dev->num_statics) | 
 | 		goto exit; | 
 |  | 
 | 	/* clear port */ | 
 | 	alu.port_forward &= ~BIT(port); | 
 | 	if (!alu.port_forward) | 
 | 		alu.is_static = false; | 
 | 	dev->dev_ops->w_sta_mac_table(dev, index, &alu); | 
 |  | 
 | exit: | 
 | 	return ret; | 
 | } | 
 | EXPORT_SYMBOL_GPL(ksz_port_mdb_del); | 
 |  | 
 | int ksz_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy) | 
 | { | 
 | 	struct ksz_device *dev = ds->priv; | 
 |  | 
 | 	if (!dsa_is_user_port(ds, port)) | 
 | 		return 0; | 
 |  | 
 | 	/* setup slave port */ | 
 | 	dev->dev_ops->port_setup(dev, port, false); | 
 |  | 
 | 	/* port_stp_state_set() will be called after to enable the port so | 
 | 	 * there is no need to do anything. | 
 | 	 */ | 
 |  | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL_GPL(ksz_enable_port); | 
 |  | 
 | struct ksz_device *ksz_switch_alloc(struct device *base, void *priv) | 
 | { | 
 | 	struct dsa_switch *ds; | 
 | 	struct ksz_device *swdev; | 
 |  | 
 | 	ds = devm_kzalloc(base, sizeof(*ds), GFP_KERNEL); | 
 | 	if (!ds) | 
 | 		return NULL; | 
 |  | 
 | 	ds->dev = base; | 
 | 	ds->num_ports = DSA_MAX_PORTS; | 
 |  | 
 | 	swdev = devm_kzalloc(base, sizeof(*swdev), GFP_KERNEL); | 
 | 	if (!swdev) | 
 | 		return NULL; | 
 |  | 
 | 	ds->priv = swdev; | 
 | 	swdev->dev = base; | 
 |  | 
 | 	swdev->ds = ds; | 
 | 	swdev->priv = priv; | 
 |  | 
 | 	return swdev; | 
 | } | 
 | EXPORT_SYMBOL(ksz_switch_alloc); | 
 |  | 
 | int ksz_switch_register(struct ksz_device *dev, | 
 | 			const struct ksz_dev_ops *ops) | 
 | { | 
 | 	struct device_node *port, *ports; | 
 | 	phy_interface_t interface; | 
 | 	unsigned int port_num; | 
 | 	int ret; | 
 |  | 
 | 	if (dev->pdata) | 
 | 		dev->chip_id = dev->pdata->chip_id; | 
 |  | 
 | 	dev->reset_gpio = devm_gpiod_get_optional(dev->dev, "reset", | 
 | 						  GPIOD_OUT_LOW); | 
 | 	if (IS_ERR(dev->reset_gpio)) | 
 | 		return PTR_ERR(dev->reset_gpio); | 
 |  | 
 | 	if (dev->reset_gpio) { | 
 | 		gpiod_set_value_cansleep(dev->reset_gpio, 1); | 
 | 		usleep_range(10000, 12000); | 
 | 		gpiod_set_value_cansleep(dev->reset_gpio, 0); | 
 | 		msleep(100); | 
 | 	} | 
 |  | 
 | 	mutex_init(&dev->dev_mutex); | 
 | 	mutex_init(&dev->regmap_mutex); | 
 | 	mutex_init(&dev->alu_mutex); | 
 | 	mutex_init(&dev->vlan_mutex); | 
 |  | 
 | 	dev->dev_ops = ops; | 
 |  | 
 | 	if (dev->dev_ops->detect(dev)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	ret = dev->dev_ops->init(dev); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	/* Host port interface will be self detected, or specifically set in | 
 | 	 * device tree. | 
 | 	 */ | 
 | 	for (port_num = 0; port_num < dev->port_cnt; ++port_num) | 
 | 		dev->ports[port_num].interface = PHY_INTERFACE_MODE_NA; | 
 | 	if (dev->dev->of_node) { | 
 | 		ret = of_get_phy_mode(dev->dev->of_node, &interface); | 
 | 		if (ret == 0) | 
 | 			dev->compat_interface = interface; | 
 | 		ports = of_get_child_by_name(dev->dev->of_node, "ethernet-ports"); | 
 | 		if (!ports) | 
 | 			ports = of_get_child_by_name(dev->dev->of_node, "ports"); | 
 | 		if (ports) { | 
 | 			for_each_available_child_of_node(ports, port) { | 
 | 				if (of_property_read_u32(port, "reg", | 
 | 							 &port_num)) | 
 | 					continue; | 
 | 				if (!(dev->port_mask & BIT(port_num))) { | 
 | 					of_node_put(port); | 
 | 					of_node_put(ports); | 
 | 					return -EINVAL; | 
 | 				} | 
 | 				of_get_phy_mode(port, | 
 | 						&dev->ports[port_num].interface); | 
 | 			} | 
 | 			of_node_put(ports); | 
 | 		} | 
 | 		dev->synclko_125 = of_property_read_bool(dev->dev->of_node, | 
 | 							 "microchip,synclko-125"); | 
 | 	} | 
 |  | 
 | 	ret = dsa_register_switch(dev->ds); | 
 | 	if (ret) { | 
 | 		dev->dev_ops->exit(dev); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	/* Read MIB counters every 30 seconds to avoid overflow. */ | 
 | 	dev->mib_read_interval = msecs_to_jiffies(30000); | 
 |  | 
 | 	/* Start the MIB timer. */ | 
 | 	schedule_delayed_work(&dev->mib_read, 0); | 
 |  | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL(ksz_switch_register); | 
 |  | 
 | void ksz_switch_remove(struct ksz_device *dev) | 
 | { | 
 | 	/* timer started */ | 
 | 	if (dev->mib_read_interval) { | 
 | 		dev->mib_read_interval = 0; | 
 | 		cancel_delayed_work_sync(&dev->mib_read); | 
 | 	} | 
 |  | 
 | 	dev->dev_ops->exit(dev); | 
 | 	dsa_unregister_switch(dev->ds); | 
 |  | 
 | 	if (dev->reset_gpio) | 
 | 		gpiod_set_value_cansleep(dev->reset_gpio, 1); | 
 |  | 
 | } | 
 | EXPORT_SYMBOL(ksz_switch_remove); | 
 |  | 
 | MODULE_AUTHOR("Woojung Huh <Woojung.Huh@microchip.com>"); | 
 | MODULE_DESCRIPTION("Microchip KSZ Series Switch DSA Driver"); | 
 | MODULE_LICENSE("GPL"); |