|  | // SPDX-License-Identifier: GPL-2.0-or-later | 
|  | /* | 
|  | *  Atheros Communication Bluetooth HCIATH3K UART protocol | 
|  | * | 
|  | *  HCIATH3K (HCI Atheros AR300x Protocol) is a Atheros Communication's | 
|  | *  power management protocol extension to H4 to support AR300x Bluetooth Chip. | 
|  | * | 
|  | *  Copyright (c) 2009-2010 Atheros Communications Inc. | 
|  | * | 
|  | *  Acknowledgements: | 
|  | *  This file is based on hci_h4.c, which was written | 
|  | *  by Maxim Krasnyansky and Marcel Holtmann. | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/kernel.h> | 
|  |  | 
|  | #include <linux/init.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/tty.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/ioctl.h> | 
|  | #include <linux/skbuff.h> | 
|  |  | 
|  | #include <net/bluetooth/bluetooth.h> | 
|  | #include <net/bluetooth/hci_core.h> | 
|  |  | 
|  | #include "hci_uart.h" | 
|  |  | 
|  | struct ath_struct { | 
|  | struct hci_uart *hu; | 
|  | unsigned int cur_sleep; | 
|  |  | 
|  | struct sk_buff *rx_skb; | 
|  | struct sk_buff_head txq; | 
|  | struct work_struct ctxtsw; | 
|  | }; | 
|  |  | 
|  | #define OP_WRITE_TAG	0x01 | 
|  |  | 
|  | #define INDEX_BDADDR	0x01 | 
|  |  | 
|  | struct ath_vendor_cmd { | 
|  | __u8 opcode; | 
|  | __le16 index; | 
|  | __u8 len; | 
|  | __u8 data[251]; | 
|  | } __packed; | 
|  |  | 
|  | static int ath_wakeup_ar3k(struct tty_struct *tty) | 
|  | { | 
|  | int status = tty->driver->ops->tiocmget(tty); | 
|  |  | 
|  | if (status & TIOCM_CTS) | 
|  | return status; | 
|  |  | 
|  | /* Clear RTS first */ | 
|  | tty->driver->ops->tiocmget(tty); | 
|  | tty->driver->ops->tiocmset(tty, 0x00, TIOCM_RTS); | 
|  | msleep(20); | 
|  |  | 
|  | /* Set RTS, wake up board */ | 
|  | tty->driver->ops->tiocmget(tty); | 
|  | tty->driver->ops->tiocmset(tty, TIOCM_RTS, 0x00); | 
|  | msleep(20); | 
|  |  | 
|  | status = tty->driver->ops->tiocmget(tty); | 
|  | return status; | 
|  | } | 
|  |  | 
|  | static void ath_hci_uart_work(struct work_struct *work) | 
|  | { | 
|  | int status; | 
|  | struct ath_struct *ath; | 
|  | struct hci_uart *hu; | 
|  | struct tty_struct *tty; | 
|  |  | 
|  | ath = container_of(work, struct ath_struct, ctxtsw); | 
|  |  | 
|  | hu = ath->hu; | 
|  | tty = hu->tty; | 
|  |  | 
|  | /* verify and wake up controller */ | 
|  | if (ath->cur_sleep) { | 
|  | status = ath_wakeup_ar3k(tty); | 
|  | if (!(status & TIOCM_CTS)) | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Ready to send Data */ | 
|  | clear_bit(HCI_UART_SENDING, &hu->tx_state); | 
|  | hci_uart_tx_wakeup(hu); | 
|  | } | 
|  |  | 
|  | static int ath_open(struct hci_uart *hu) | 
|  | { | 
|  | struct ath_struct *ath; | 
|  |  | 
|  | BT_DBG("hu %p", hu); | 
|  |  | 
|  | if (!hci_uart_has_flow_control(hu)) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | ath = kzalloc(sizeof(*ath), GFP_KERNEL); | 
|  | if (!ath) | 
|  | return -ENOMEM; | 
|  |  | 
|  | skb_queue_head_init(&ath->txq); | 
|  |  | 
|  | hu->priv = ath; | 
|  | ath->hu = hu; | 
|  |  | 
|  | INIT_WORK(&ath->ctxtsw, ath_hci_uart_work); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ath_close(struct hci_uart *hu) | 
|  | { | 
|  | struct ath_struct *ath = hu->priv; | 
|  |  | 
|  | BT_DBG("hu %p", hu); | 
|  |  | 
|  | skb_queue_purge(&ath->txq); | 
|  |  | 
|  | kfree_skb(ath->rx_skb); | 
|  |  | 
|  | cancel_work_sync(&ath->ctxtsw); | 
|  |  | 
|  | hu->priv = NULL; | 
|  | kfree(ath); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ath_flush(struct hci_uart *hu) | 
|  | { | 
|  | struct ath_struct *ath = hu->priv; | 
|  |  | 
|  | BT_DBG("hu %p", hu); | 
|  |  | 
|  | skb_queue_purge(&ath->txq); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ath_vendor_cmd(struct hci_dev *hdev, uint8_t opcode, uint16_t index, | 
|  | const void *data, size_t dlen) | 
|  | { | 
|  | struct sk_buff *skb; | 
|  | struct ath_vendor_cmd cmd; | 
|  |  | 
|  | if (dlen > sizeof(cmd.data)) | 
|  | return -EINVAL; | 
|  |  | 
|  | cmd.opcode = opcode; | 
|  | cmd.index = cpu_to_le16(index); | 
|  | cmd.len = dlen; | 
|  | memcpy(cmd.data, data, dlen); | 
|  |  | 
|  | skb = __hci_cmd_sync(hdev, 0xfc0b, dlen + 4, &cmd, HCI_INIT_TIMEOUT); | 
|  | if (IS_ERR(skb)) | 
|  | return PTR_ERR(skb); | 
|  | kfree_skb(skb); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ath_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr) | 
|  | { | 
|  | return ath_vendor_cmd(hdev, OP_WRITE_TAG, INDEX_BDADDR, bdaddr, | 
|  | sizeof(*bdaddr)); | 
|  | } | 
|  |  | 
|  | static int ath_setup(struct hci_uart *hu) | 
|  | { | 
|  | BT_DBG("hu %p", hu); | 
|  |  | 
|  | hu->hdev->set_bdaddr = ath_set_bdaddr; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct h4_recv_pkt ath_recv_pkts[] = { | 
|  | { H4_RECV_ACL,   .recv = hci_recv_frame }, | 
|  | { H4_RECV_SCO,   .recv = hci_recv_frame }, | 
|  | { H4_RECV_EVENT, .recv = hci_recv_frame }, | 
|  | }; | 
|  |  | 
|  | static int ath_recv(struct hci_uart *hu, const void *data, int count) | 
|  | { | 
|  | struct ath_struct *ath = hu->priv; | 
|  |  | 
|  | ath->rx_skb = h4_recv_buf(hu->hdev, ath->rx_skb, data, count, | 
|  | ath_recv_pkts, ARRAY_SIZE(ath_recv_pkts)); | 
|  | if (IS_ERR(ath->rx_skb)) { | 
|  | int err = PTR_ERR(ath->rx_skb); | 
|  | bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err); | 
|  | ath->rx_skb = NULL; | 
|  | return err; | 
|  | } | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | #define HCI_OP_ATH_SLEEP 0xFC04 | 
|  |  | 
|  | static int ath_enqueue(struct hci_uart *hu, struct sk_buff *skb) | 
|  | { | 
|  | struct ath_struct *ath = hu->priv; | 
|  |  | 
|  | if (hci_skb_pkt_type(skb) == HCI_SCODATA_PKT) { | 
|  | kfree_skb(skb); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Update power management enable flag with parameters of | 
|  | * HCI sleep enable vendor specific HCI command. | 
|  | */ | 
|  | if (hci_skb_pkt_type(skb) == HCI_COMMAND_PKT) { | 
|  | struct hci_command_hdr *hdr = (void *)skb->data; | 
|  |  | 
|  | if (__le16_to_cpu(hdr->opcode) == HCI_OP_ATH_SLEEP) | 
|  | ath->cur_sleep = skb->data[HCI_COMMAND_HDR_SIZE]; | 
|  | } | 
|  |  | 
|  | BT_DBG("hu %p skb %p", hu, skb); | 
|  |  | 
|  | /* Prepend skb with frame type */ | 
|  | memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1); | 
|  |  | 
|  | skb_queue_tail(&ath->txq, skb); | 
|  | set_bit(HCI_UART_SENDING, &hu->tx_state); | 
|  |  | 
|  | schedule_work(&ath->ctxtsw); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct sk_buff *ath_dequeue(struct hci_uart *hu) | 
|  | { | 
|  | struct ath_struct *ath = hu->priv; | 
|  |  | 
|  | return skb_dequeue(&ath->txq); | 
|  | } | 
|  |  | 
|  | static const struct hci_uart_proto athp = { | 
|  | .id		= HCI_UART_ATH3K, | 
|  | .name		= "ATH3K", | 
|  | .manufacturer	= 69, | 
|  | .open		= ath_open, | 
|  | .close		= ath_close, | 
|  | .flush		= ath_flush, | 
|  | .setup		= ath_setup, | 
|  | .recv		= ath_recv, | 
|  | .enqueue	= ath_enqueue, | 
|  | .dequeue	= ath_dequeue, | 
|  | }; | 
|  |  | 
|  | int __init ath_init(void) | 
|  | { | 
|  | return hci_uart_register_proto(&athp); | 
|  | } | 
|  |  | 
|  | int __exit ath_deinit(void) | 
|  | { | 
|  | return hci_uart_unregister_proto(&athp); | 
|  | } |