|  | /* SPDX-License-Identifier: GPL-2.0 */ | 
|  | #ifndef __LINUX_UACCESS_H__ | 
|  | #define __LINUX_UACCESS_H__ | 
|  |  | 
|  | #include <linux/fault-inject-usercopy.h> | 
|  | #include <linux/instrumented.h> | 
|  | #include <linux/minmax.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/thread_info.h> | 
|  |  | 
|  | #include <asm/uaccess.h> | 
|  |  | 
|  | /* | 
|  | * Architectures should provide two primitives (raw_copy_{to,from}_user()) | 
|  | * and get rid of their private instances of copy_{to,from}_user() and | 
|  | * __copy_{to,from}_user{,_inatomic}(). | 
|  | * | 
|  | * raw_copy_{to,from}_user(to, from, size) should copy up to size bytes and | 
|  | * return the amount left to copy.  They should assume that access_ok() has | 
|  | * already been checked (and succeeded); they should *not* zero-pad anything. | 
|  | * No KASAN or object size checks either - those belong here. | 
|  | * | 
|  | * Both of these functions should attempt to copy size bytes starting at from | 
|  | * into the area starting at to.  They must not fetch or store anything | 
|  | * outside of those areas.  Return value must be between 0 (everything | 
|  | * copied successfully) and size (nothing copied). | 
|  | * | 
|  | * If raw_copy_{to,from}_user(to, from, size) returns N, size - N bytes starting | 
|  | * at to must become equal to the bytes fetched from the corresponding area | 
|  | * starting at from.  All data past to + size - N must be left unmodified. | 
|  | * | 
|  | * If copying succeeds, the return value must be 0.  If some data cannot be | 
|  | * fetched, it is permitted to copy less than had been fetched; the only | 
|  | * hard requirement is that not storing anything at all (i.e. returning size) | 
|  | * should happen only when nothing could be copied.  In other words, you don't | 
|  | * have to squeeze as much as possible - it is allowed, but not necessary. | 
|  | * | 
|  | * For raw_copy_from_user() to always points to kernel memory and no faults | 
|  | * on store should happen.  Interpretation of from is affected by set_fs(). | 
|  | * For raw_copy_to_user() it's the other way round. | 
|  | * | 
|  | * Both can be inlined - it's up to architectures whether it wants to bother | 
|  | * with that.  They should not be used directly; they are used to implement | 
|  | * the 6 functions (copy_{to,from}_user(), __copy_{to,from}_user_inatomic()) | 
|  | * that are used instead.  Out of those, __... ones are inlined.  Plain | 
|  | * copy_{to,from}_user() might or might not be inlined.  If you want them | 
|  | * inlined, have asm/uaccess.h define INLINE_COPY_{TO,FROM}_USER. | 
|  | * | 
|  | * NOTE: only copy_from_user() zero-pads the destination in case of short copy. | 
|  | * Neither __copy_from_user() nor __copy_from_user_inatomic() zero anything | 
|  | * at all; their callers absolutely must check the return value. | 
|  | * | 
|  | * Biarch ones should also provide raw_copy_in_user() - similar to the above, | 
|  | * but both source and destination are __user pointers (affected by set_fs() | 
|  | * as usual) and both source and destination can trigger faults. | 
|  | */ | 
|  |  | 
|  | static __always_inline __must_check unsigned long | 
|  | __copy_from_user_inatomic(void *to, const void __user *from, unsigned long n) | 
|  | { | 
|  | unsigned long res; | 
|  |  | 
|  | instrument_copy_from_user_before(to, from, n); | 
|  | check_object_size(to, n, false); | 
|  | res = raw_copy_from_user(to, from, n); | 
|  | instrument_copy_from_user_after(to, from, n, res); | 
|  | return res; | 
|  | } | 
|  |  | 
|  | static __always_inline __must_check unsigned long | 
|  | __copy_from_user(void *to, const void __user *from, unsigned long n) | 
|  | { | 
|  | unsigned long res; | 
|  |  | 
|  | might_fault(); | 
|  | instrument_copy_from_user_before(to, from, n); | 
|  | if (should_fail_usercopy()) | 
|  | return n; | 
|  | check_object_size(to, n, false); | 
|  | res = raw_copy_from_user(to, from, n); | 
|  | instrument_copy_from_user_after(to, from, n, res); | 
|  | return res; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * __copy_to_user_inatomic: - Copy a block of data into user space, with less checking. | 
|  | * @to:   Destination address, in user space. | 
|  | * @from: Source address, in kernel space. | 
|  | * @n:    Number of bytes to copy. | 
|  | * | 
|  | * Context: User context only. | 
|  | * | 
|  | * Copy data from kernel space to user space.  Caller must check | 
|  | * the specified block with access_ok() before calling this function. | 
|  | * The caller should also make sure he pins the user space address | 
|  | * so that we don't result in page fault and sleep. | 
|  | */ | 
|  | static __always_inline __must_check unsigned long | 
|  | __copy_to_user_inatomic(void __user *to, const void *from, unsigned long n) | 
|  | { | 
|  | if (should_fail_usercopy()) | 
|  | return n; | 
|  | instrument_copy_to_user(to, from, n); | 
|  | check_object_size(from, n, true); | 
|  | return raw_copy_to_user(to, from, n); | 
|  | } | 
|  |  | 
|  | static __always_inline __must_check unsigned long | 
|  | __copy_to_user(void __user *to, const void *from, unsigned long n) | 
|  | { | 
|  | might_fault(); | 
|  | if (should_fail_usercopy()) | 
|  | return n; | 
|  | instrument_copy_to_user(to, from, n); | 
|  | check_object_size(from, n, true); | 
|  | return raw_copy_to_user(to, from, n); | 
|  | } | 
|  |  | 
|  | #ifdef INLINE_COPY_FROM_USER | 
|  | static inline __must_check unsigned long | 
|  | _copy_from_user(void *to, const void __user *from, unsigned long n) | 
|  | { | 
|  | unsigned long res = n; | 
|  | might_fault(); | 
|  | if (!should_fail_usercopy() && likely(access_ok(from, n))) { | 
|  | instrument_copy_from_user_before(to, from, n); | 
|  | res = raw_copy_from_user(to, from, n); | 
|  | instrument_copy_from_user_after(to, from, n, res); | 
|  | } | 
|  | if (unlikely(res)) | 
|  | memset(to + (n - res), 0, res); | 
|  | return res; | 
|  | } | 
|  | #else | 
|  | extern __must_check unsigned long | 
|  | _copy_from_user(void *, const void __user *, unsigned long); | 
|  | #endif | 
|  |  | 
|  | #ifdef INLINE_COPY_TO_USER | 
|  | static inline __must_check unsigned long | 
|  | _copy_to_user(void __user *to, const void *from, unsigned long n) | 
|  | { | 
|  | might_fault(); | 
|  | if (should_fail_usercopy()) | 
|  | return n; | 
|  | if (access_ok(to, n)) { | 
|  | instrument_copy_to_user(to, from, n); | 
|  | n = raw_copy_to_user(to, from, n); | 
|  | } | 
|  | return n; | 
|  | } | 
|  | #else | 
|  | extern __must_check unsigned long | 
|  | _copy_to_user(void __user *, const void *, unsigned long); | 
|  | #endif | 
|  |  | 
|  | static __always_inline unsigned long __must_check | 
|  | copy_from_user(void *to, const void __user *from, unsigned long n) | 
|  | { | 
|  | if (check_copy_size(to, n, false)) | 
|  | n = _copy_from_user(to, from, n); | 
|  | return n; | 
|  | } | 
|  |  | 
|  | static __always_inline unsigned long __must_check | 
|  | copy_to_user(void __user *to, const void *from, unsigned long n) | 
|  | { | 
|  | if (check_copy_size(from, n, true)) | 
|  | n = _copy_to_user(to, from, n); | 
|  | return n; | 
|  | } | 
|  |  | 
|  | #ifndef copy_mc_to_kernel | 
|  | /* | 
|  | * Without arch opt-in this generic copy_mc_to_kernel() will not handle | 
|  | * #MC (or arch equivalent) during source read. | 
|  | */ | 
|  | static inline unsigned long __must_check | 
|  | copy_mc_to_kernel(void *dst, const void *src, size_t cnt) | 
|  | { | 
|  | memcpy(dst, src, cnt); | 
|  | return 0; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static __always_inline void pagefault_disabled_inc(void) | 
|  | { | 
|  | current->pagefault_disabled++; | 
|  | } | 
|  |  | 
|  | static __always_inline void pagefault_disabled_dec(void) | 
|  | { | 
|  | current->pagefault_disabled--; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * These routines enable/disable the pagefault handler. If disabled, it will | 
|  | * not take any locks and go straight to the fixup table. | 
|  | * | 
|  | * User access methods will not sleep when called from a pagefault_disabled() | 
|  | * environment. | 
|  | */ | 
|  | static inline void pagefault_disable(void) | 
|  | { | 
|  | pagefault_disabled_inc(); | 
|  | /* | 
|  | * make sure to have issued the store before a pagefault | 
|  | * can hit. | 
|  | */ | 
|  | barrier(); | 
|  | } | 
|  |  | 
|  | static inline void pagefault_enable(void) | 
|  | { | 
|  | /* | 
|  | * make sure to issue those last loads/stores before enabling | 
|  | * the pagefault handler again. | 
|  | */ | 
|  | barrier(); | 
|  | pagefault_disabled_dec(); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Is the pagefault handler disabled? If so, user access methods will not sleep. | 
|  | */ | 
|  | static inline bool pagefault_disabled(void) | 
|  | { | 
|  | return current->pagefault_disabled != 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The pagefault handler is in general disabled by pagefault_disable() or | 
|  | * when in irq context (via in_atomic()). | 
|  | * | 
|  | * This function should only be used by the fault handlers. Other users should | 
|  | * stick to pagefault_disabled(). | 
|  | * Please NEVER use preempt_disable() to disable the fault handler. With | 
|  | * !CONFIG_PREEMPT_COUNT, this is like a NOP. So the handler won't be disabled. | 
|  | * in_atomic() will report different values based on !CONFIG_PREEMPT_COUNT. | 
|  | */ | 
|  | #define faulthandler_disabled() (pagefault_disabled() || in_atomic()) | 
|  |  | 
|  | #ifndef CONFIG_ARCH_HAS_SUBPAGE_FAULTS | 
|  |  | 
|  | /** | 
|  | * probe_subpage_writeable: probe the user range for write faults at sub-page | 
|  | *			    granularity (e.g. arm64 MTE) | 
|  | * @uaddr: start of address range | 
|  | * @size: size of address range | 
|  | * | 
|  | * Returns 0 on success, the number of bytes not probed on fault. | 
|  | * | 
|  | * It is expected that the caller checked for the write permission of each | 
|  | * page in the range either by put_user() or GUP. The architecture port can | 
|  | * implement a more efficient get_user() probing if the same sub-page faults | 
|  | * are triggered by either a read or a write. | 
|  | */ | 
|  | static inline size_t probe_subpage_writeable(char __user *uaddr, size_t size) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #endif /* CONFIG_ARCH_HAS_SUBPAGE_FAULTS */ | 
|  |  | 
|  | #ifndef ARCH_HAS_NOCACHE_UACCESS | 
|  |  | 
|  | static inline __must_check unsigned long | 
|  | __copy_from_user_inatomic_nocache(void *to, const void __user *from, | 
|  | unsigned long n) | 
|  | { | 
|  | return __copy_from_user_inatomic(to, from, n); | 
|  | } | 
|  |  | 
|  | #endif		/* ARCH_HAS_NOCACHE_UACCESS */ | 
|  |  | 
|  | extern __must_check int check_zeroed_user(const void __user *from, size_t size); | 
|  |  | 
|  | /** | 
|  | * copy_struct_from_user: copy a struct from userspace | 
|  | * @dst:   Destination address, in kernel space. This buffer must be @ksize | 
|  | *         bytes long. | 
|  | * @ksize: Size of @dst struct. | 
|  | * @src:   Source address, in userspace. | 
|  | * @usize: (Alleged) size of @src struct. | 
|  | * | 
|  | * Copies a struct from userspace to kernel space, in a way that guarantees | 
|  | * backwards-compatibility for struct syscall arguments (as long as future | 
|  | * struct extensions are made such that all new fields are *appended* to the | 
|  | * old struct, and zeroed-out new fields have the same meaning as the old | 
|  | * struct). | 
|  | * | 
|  | * @ksize is just sizeof(*dst), and @usize should've been passed by userspace. | 
|  | * The recommended usage is something like the following: | 
|  | * | 
|  | *   SYSCALL_DEFINE2(foobar, const struct foo __user *, uarg, size_t, usize) | 
|  | *   { | 
|  | *      int err; | 
|  | *      struct foo karg = {}; | 
|  | * | 
|  | *      if (usize > PAGE_SIZE) | 
|  | *        return -E2BIG; | 
|  | *      if (usize < FOO_SIZE_VER0) | 
|  | *        return -EINVAL; | 
|  | * | 
|  | *      err = copy_struct_from_user(&karg, sizeof(karg), uarg, usize); | 
|  | *      if (err) | 
|  | *        return err; | 
|  | * | 
|  | *      // ... | 
|  | *   } | 
|  | * | 
|  | * There are three cases to consider: | 
|  | *  * If @usize == @ksize, then it's copied verbatim. | 
|  | *  * If @usize < @ksize, then the userspace has passed an old struct to a | 
|  | *    newer kernel. The rest of the trailing bytes in @dst (@ksize - @usize) | 
|  | *    are to be zero-filled. | 
|  | *  * If @usize > @ksize, then the userspace has passed a new struct to an | 
|  | *    older kernel. The trailing bytes unknown to the kernel (@usize - @ksize) | 
|  | *    are checked to ensure they are zeroed, otherwise -E2BIG is returned. | 
|  | * | 
|  | * Returns (in all cases, some data may have been copied): | 
|  | *  * -E2BIG:  (@usize > @ksize) and there are non-zero trailing bytes in @src. | 
|  | *  * -EFAULT: access to userspace failed. | 
|  | */ | 
|  | static __always_inline __must_check int | 
|  | copy_struct_from_user(void *dst, size_t ksize, const void __user *src, | 
|  | size_t usize) | 
|  | { | 
|  | size_t size = min(ksize, usize); | 
|  | size_t rest = max(ksize, usize) - size; | 
|  |  | 
|  | /* Double check if ksize is larger than a known object size. */ | 
|  | if (WARN_ON_ONCE(ksize > __builtin_object_size(dst, 1))) | 
|  | return -E2BIG; | 
|  |  | 
|  | /* Deal with trailing bytes. */ | 
|  | if (usize < ksize) { | 
|  | memset(dst + size, 0, rest); | 
|  | } else if (usize > ksize) { | 
|  | int ret = check_zeroed_user(src + size, rest); | 
|  | if (ret <= 0) | 
|  | return ret ?: -E2BIG; | 
|  | } | 
|  | /* Copy the interoperable parts of the struct. */ | 
|  | if (copy_from_user(dst, src, size)) | 
|  | return -EFAULT; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | bool copy_from_kernel_nofault_allowed(const void *unsafe_src, size_t size); | 
|  |  | 
|  | long copy_from_kernel_nofault(void *dst, const void *src, size_t size); | 
|  | long notrace copy_to_kernel_nofault(void *dst, const void *src, size_t size); | 
|  |  | 
|  | long copy_from_user_nofault(void *dst, const void __user *src, size_t size); | 
|  | long notrace copy_to_user_nofault(void __user *dst, const void *src, | 
|  | size_t size); | 
|  |  | 
|  | long strncpy_from_kernel_nofault(char *dst, const void *unsafe_addr, | 
|  | long count); | 
|  |  | 
|  | long strncpy_from_user_nofault(char *dst, const void __user *unsafe_addr, | 
|  | long count); | 
|  | long strnlen_user_nofault(const void __user *unsafe_addr, long count); | 
|  |  | 
|  | #ifndef __get_kernel_nofault | 
|  | #define __get_kernel_nofault(dst, src, type, label)	\ | 
|  | do {							\ | 
|  | type __user *p = (type __force __user *)(src);	\ | 
|  | type data;					\ | 
|  | if (__get_user(data, p))			\ | 
|  | goto label;				\ | 
|  | *(type *)dst = data;				\ | 
|  | } while (0) | 
|  |  | 
|  | #define __put_kernel_nofault(dst, src, type, label)	\ | 
|  | do {							\ | 
|  | type __user *p = (type __force __user *)(dst);	\ | 
|  | type data = *(type *)src;			\ | 
|  | if (__put_user(data, p))			\ | 
|  | goto label;				\ | 
|  | } while (0) | 
|  | #endif | 
|  |  | 
|  | /** | 
|  | * get_kernel_nofault(): safely attempt to read from a location | 
|  | * @val: read into this variable | 
|  | * @ptr: address to read from | 
|  | * | 
|  | * Returns 0 on success, or -EFAULT. | 
|  | */ | 
|  | #define get_kernel_nofault(val, ptr) ({				\ | 
|  | const typeof(val) *__gk_ptr = (ptr);			\ | 
|  | copy_from_kernel_nofault(&(val), __gk_ptr, sizeof(val));\ | 
|  | }) | 
|  |  | 
|  | #ifndef user_access_begin | 
|  | #define user_access_begin(ptr,len) access_ok(ptr, len) | 
|  | #define user_access_end() do { } while (0) | 
|  | #define unsafe_op_wrap(op, err) do { if (unlikely(op)) goto err; } while (0) | 
|  | #define unsafe_get_user(x,p,e) unsafe_op_wrap(__get_user(x,p),e) | 
|  | #define unsafe_put_user(x,p,e) unsafe_op_wrap(__put_user(x,p),e) | 
|  | #define unsafe_copy_to_user(d,s,l,e) unsafe_op_wrap(__copy_to_user(d,s,l),e) | 
|  | #define unsafe_copy_from_user(d,s,l,e) unsafe_op_wrap(__copy_from_user(d,s,l),e) | 
|  | static inline unsigned long user_access_save(void) { return 0UL; } | 
|  | static inline void user_access_restore(unsigned long flags) { } | 
|  | #endif | 
|  | #ifndef user_write_access_begin | 
|  | #define user_write_access_begin user_access_begin | 
|  | #define user_write_access_end user_access_end | 
|  | #endif | 
|  | #ifndef user_read_access_begin | 
|  | #define user_read_access_begin user_access_begin | 
|  | #define user_read_access_end user_access_end | 
|  | #endif | 
|  |  | 
|  | #ifdef CONFIG_HARDENED_USERCOPY | 
|  | void __noreturn usercopy_abort(const char *name, const char *detail, | 
|  | bool to_user, unsigned long offset, | 
|  | unsigned long len); | 
|  | #endif | 
|  |  | 
|  | #endif		/* __LINUX_UACCESS_H__ */ |