drivers/hwmon/lan966x-hwmon.c - third_party/kernel - Git at Google

 // SPDX-License-Identifier: GPL-2.0-only

 #include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/hwmon.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/mod_devicetable.h>
 #include <linux/platform_device.h>
 #include <linux/polynomial.h>
 #include <linux/regmap.h>

 /*
  * The original translation formulae of the temperature (in degrees of Celsius)
  * are as follows:
  *
  *   T = -3.4627e-11*(N^4) + 1.1023e-7*(N^3) + -1.9165e-4*(N^2) +
  *       3.0604e-1*(N^1) + -5.6197e1
  *
  * where [-56.197, 136.402]C and N = [0, 1023].
  *
  * They must be accordingly altered to be suitable for the integer arithmetics.
  * The technique is called 'factor redistribution', which just makes sure the
  * multiplications and divisions are made so to have a result of the operations
  * within the integer numbers limit. In addition we need to translate the
  * formulae to accept millidegrees of Celsius. Here what it looks like after
  * the alterations:
  *
  *   T = -34627e-12*(N^4) + 110230e-9*(N^3) + -191650e-6*(N^2) +
  *       306040e-3*(N^1) + -56197
  *
  * where T = [-56197, 136402]mC and N = [0, 1023].
  */

 static const struct polynomial poly_N_to_temp = {
 	.terms = {
 		{4,  -34627, 1000, 1},
 		{3,  110230, 1000, 1},
 		{2, -191650, 1000, 1},
 		{1,  306040, 1000, 1},
 		{0,  -56197,    1, 1}
 	}
 };

 #define PVT_SENSOR_CTRL		0x0 /* unused */
 #define PVT_SENSOR_CFG		0x4
 #define   SENSOR_CFG_CLK_CFG		GENMASK(27, 20)
 #define   SENSOR_CFG_TRIM_VAL		GENMASK(13, 9)
 #define   SENSOR_CFG_SAMPLE_ENA		BIT(8)
 #define   SENSOR_CFG_START_CAPTURE	BIT(7)
 #define   SENSOR_CFG_CONTINIOUS_MODE	BIT(6)
 #define   SENSOR_CFG_PSAMPLE_ENA	GENMASK(1, 0)
 #define PVT_SENSOR_STAT		0x8
 #define   SENSOR_STAT_DATA_VALID	BIT(10)
 #define   SENSOR_STAT_DATA		GENMASK(9, 0)

 #define FAN_CFG			0x0
 #define   FAN_CFG_DUTY_CYCLE		GENMASK(23, 16)
 #define   INV_POL			BIT(3)
 #define   GATE_ENA			BIT(2)
 #define   PWM_OPEN_COL_ENA		BIT(1)
 #define   FAN_STAT_CFG			BIT(0)
 #define FAN_PWM_FREQ		0x4
 #define   FAN_PWM_CYC_10US		GENMASK(25, 15)
 #define   FAN_PWM_FREQ_FREQ		GENMASK(14, 0)
 #define FAN_CNT			0xc
 #define   FAN_CNT_DATA			GENMASK(15, 0)

 #define LAN966X_PVT_CLK		1200000 /* 1.2 MHz */

 struct lan966x_hwmon {
 	struct regmap *regmap_pvt;
 	struct regmap *regmap_fan;
 	struct clk *clk;
 	unsigned long clk_rate;
 };

 static int lan966x_hwmon_read_temp(struct device *dev, long *val)
 {
 	struct lan966x_hwmon *hwmon = dev_get_drvdata(dev);
 	unsigned int data;
 	int ret;

 	ret = regmap_read(hwmon->regmap_pvt, PVT_SENSOR_STAT, &data);
 	if (ret < 0)
 		return ret;

 	if (!(data & SENSOR_STAT_DATA_VALID))
 		return -ENODATA;

 	*val = polynomial_calc(&poly_N_to_temp,
 			       FIELD_GET(SENSOR_STAT_DATA, data));

 	return 0;
 }

 static int lan966x_hwmon_read_fan(struct device *dev, long *val)
 {
 	struct lan966x_hwmon *hwmon = dev_get_drvdata(dev);
 	unsigned int data;
 	int ret;

 	ret = regmap_read(hwmon->regmap_fan, FAN_CNT, &data);
 	if (ret < 0)
 		return ret;

 	/*
 	 * Data is given in pulses per second. Assume two pulses
 	 * per revolution.
 	 */
 	*val = FIELD_GET(FAN_CNT_DATA, data) * 60 / 2;

 	return 0;
 }

 static int lan966x_hwmon_read_pwm(struct device *dev, long *val)
 {
 	struct lan966x_hwmon *hwmon = dev_get_drvdata(dev);
 	unsigned int data;
 	int ret;

 	ret = regmap_read(hwmon->regmap_fan, FAN_CFG, &data);
 	if (ret < 0)
 		return ret;

 	*val = FIELD_GET(FAN_CFG_DUTY_CYCLE, data);

 	return 0;
 }

 static int lan966x_hwmon_read_pwm_freq(struct device *dev, long *val)
 {
 	struct lan966x_hwmon *hwmon = dev_get_drvdata(dev);
 	unsigned long tmp;
 	unsigned int data;
 	int ret;

 	ret = regmap_read(hwmon->regmap_fan, FAN_PWM_FREQ, &data);
 	if (ret < 0)
 		return ret;

 	/*
 	 * Datasheet says it is sys_clk / 256 / pwm_freq. But in reality
 	 * it is sys_clk / 256 / (pwm_freq + 1).
 	 */
 	data = FIELD_GET(FAN_PWM_FREQ_FREQ, data) + 1;
 	tmp = DIV_ROUND_CLOSEST(hwmon->clk_rate, 256);
 	*val = DIV_ROUND_CLOSEST(tmp, data);

 	return 0;
 }

 static int lan966x_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
 			      u32 attr, int channel, long *val)
 {
 	switch (type) {
 	case hwmon_temp:
 		return lan966x_hwmon_read_temp(dev, val);
 	case hwmon_fan:
 		return lan966x_hwmon_read_fan(dev, val);
 	case hwmon_pwm:
 		switch (attr) {
 		case hwmon_pwm_input:
 			return lan966x_hwmon_read_pwm(dev, val);
 		case hwmon_pwm_freq:
 			return lan966x_hwmon_read_pwm_freq(dev, val);
 		default:
 			return -EOPNOTSUPP;
 		}
 	default:
 		return -EOPNOTSUPP;
 	}
 }

 static int lan966x_hwmon_write_pwm(struct device *dev, long val)
 {
 	struct lan966x_hwmon *hwmon = dev_get_drvdata(dev);

 	if (val < 0 || val > 255)
 		return -EINVAL;

 	return regmap_update_bits(hwmon->regmap_fan, FAN_CFG,
 				  FAN_CFG_DUTY_CYCLE,
 				  FIELD_PREP(FAN_CFG_DUTY_CYCLE, val));
 }

 static int lan966x_hwmon_write_pwm_freq(struct device *dev, long val)
 {
 	struct lan966x_hwmon *hwmon = dev_get_drvdata(dev);

 	if (val <= 0)
 		return -EINVAL;

 	val = DIV_ROUND_CLOSEST(hwmon->clk_rate, val);
 	val = DIV_ROUND_CLOSEST(val, 256) - 1;
 	val = clamp_val(val, 0, FAN_PWM_FREQ_FREQ);

 	return regmap_update_bits(hwmon->regmap_fan, FAN_PWM_FREQ,
 				  FAN_PWM_FREQ_FREQ,
 				  FIELD_PREP(FAN_PWM_FREQ_FREQ, val));
 }

 static int lan966x_hwmon_write(struct device *dev, enum hwmon_sensor_types type,
 			       u32 attr, int channel, long val)
 {
 	switch (type) {
 	case hwmon_pwm:
 		switch (attr) {
 		case hwmon_pwm_input:
 			return lan966x_hwmon_write_pwm(dev, val);
 		case hwmon_pwm_freq:
 			return lan966x_hwmon_write_pwm_freq(dev, val);
 		default:
 			return -EOPNOTSUPP;
 		}
 	default:
 		return -EOPNOTSUPP;
 	}
 }

 static umode_t lan966x_hwmon_is_visible(const void *data,
 					enum hwmon_sensor_types type,
 					u32 attr, int channel)
 {
 	umode_t mode = 0;

 	switch (type) {
 	case hwmon_temp:
 		switch (attr) {
 		case hwmon_temp_input:
 			mode = 0444;
 			break;
 		default:
 			break;
 		}
 		break;
 	case hwmon_fan:
 		switch (attr) {
 		case hwmon_fan_input:
 			mode = 0444;
 			break;
 		default:
 			break;
 		}
 		break;
 	case hwmon_pwm:
 		switch (attr) {
 		case hwmon_pwm_input:
 		case hwmon_pwm_freq:
 			mode = 0644;
 			break;
 		default:
 			break;
 		}
 		break;
 	default:
 		break;
 	}

 	return mode;
 }

 static const struct hwmon_channel_info *lan966x_hwmon_info[] = {
 	HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ),
 	HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT),
 	HWMON_CHANNEL_INFO(fan, HWMON_F_INPUT),
 	HWMON_CHANNEL_INFO(pwm, HWMON_PWM_INPUT | HWMON_PWM_FREQ),
 	NULL
 };

 static const struct hwmon_ops lan966x_hwmon_ops = {
 	.is_visible = lan966x_hwmon_is_visible,
 	.read = lan966x_hwmon_read,
 	.write = lan966x_hwmon_write,
 };

 static const struct hwmon_chip_info lan966x_hwmon_chip_info = {
 	.ops = &lan966x_hwmon_ops,
 	.info = lan966x_hwmon_info,
 };

 static void lan966x_hwmon_disable(void *data)
 {
 	struct lan966x_hwmon *hwmon = data;

 	regmap_update_bits(hwmon->regmap_pvt, PVT_SENSOR_CFG,
 			   SENSOR_CFG_SAMPLE_ENA | SENSOR_CFG_CONTINIOUS_MODE,
 			   0);
 }

 static int lan966x_hwmon_enable(struct device *dev,
 				struct lan966x_hwmon *hwmon)
 {
 	unsigned int mask = SENSOR_CFG_CLK_CFG |
 			    SENSOR_CFG_SAMPLE_ENA |
 			    SENSOR_CFG_START_CAPTURE |
 			    SENSOR_CFG_CONTINIOUS_MODE |
 			    SENSOR_CFG_PSAMPLE_ENA;
 	unsigned int val;
 	unsigned int div;
 	int ret;

 	/* enable continuous mode */
 	val = SENSOR_CFG_SAMPLE_ENA | SENSOR_CFG_CONTINIOUS_MODE;

 	/* set PVT clock to be between 1.15 and 1.25 MHz */
 	div = DIV_ROUND_CLOSEST(hwmon->clk_rate, LAN966X_PVT_CLK);
 	val |= FIELD_PREP(SENSOR_CFG_CLK_CFG, div);

 	ret = regmap_update_bits(hwmon->regmap_pvt, PVT_SENSOR_CFG,
 				 mask, val);
 	if (ret)
 		return ret;

 	return devm_add_action_or_reset(dev, lan966x_hwmon_disable, hwmon);
 }

 static struct regmap *lan966x_init_regmap(struct platform_device *pdev,
 					  const char *name)
 {
 	struct regmap_config regmap_config = {
 		.reg_bits = 32,
 		.reg_stride = 4,
 		.val_bits = 32,
 	};
 	void __iomem *base;

 	base = devm_platform_ioremap_resource_byname(pdev, name);
 	if (IS_ERR(base))
 		return ERR_CAST(base);

 	regmap_config.name = name;

 	return devm_regmap_init_mmio(&pdev->dev, base, &regmap_config);
 }

 static void lan966x_clk_disable(void *data)
 {
 	struct lan966x_hwmon *hwmon = data;

 	clk_disable_unprepare(hwmon->clk);
 }

 static int lan966x_clk_enable(struct device *dev, struct lan966x_hwmon *hwmon)
 {
 	int ret;

 	ret = clk_prepare_enable(hwmon->clk);
 	if (ret)
 		return ret;

 	return devm_add_action_or_reset(dev, lan966x_clk_disable, hwmon);
 }

 static int lan966x_hwmon_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct lan966x_hwmon *hwmon;
 	struct device *hwmon_dev;
 	int ret;

 	hwmon = devm_kzalloc(dev, sizeof(*hwmon), GFP_KERNEL);
 	if (!hwmon)
 		return -ENOMEM;

 	hwmon->clk = devm_clk_get(dev, NULL);
 	if (IS_ERR(hwmon->clk))
 		return dev_err_probe(dev, PTR_ERR(hwmon->clk),
 				     "failed to get clock\n");

 	ret = lan966x_clk_enable(dev, hwmon);
 	if (ret)
 		return dev_err_probe(dev, ret, "failed to enable clock\n");

 	hwmon->clk_rate = clk_get_rate(hwmon->clk);

 	hwmon->regmap_pvt = lan966x_init_regmap(pdev, "pvt");
 	if (IS_ERR(hwmon->regmap_pvt))
 		return dev_err_probe(dev, PTR_ERR(hwmon->regmap_pvt),
 				     "failed to get regmap for PVT registers\n");

 	hwmon->regmap_fan = lan966x_init_regmap(pdev, "fan");
 	if (IS_ERR(hwmon->regmap_fan))
 		return dev_err_probe(dev, PTR_ERR(hwmon->regmap_fan),
 				     "failed to get regmap for fan registers\n");

 	ret = lan966x_hwmon_enable(dev, hwmon);
 	if (ret)
 		return dev_err_probe(dev, ret, "failed to enable sensor\n");

 	hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev,
 				"lan966x_hwmon", hwmon,
 				&lan966x_hwmon_chip_info, NULL);
 	if (IS_ERR(hwmon_dev))
 		return dev_err_probe(dev, PTR_ERR(hwmon_dev),
 				     "failed to register hwmon device\n");

 	return 0;
 }

 static const struct of_device_id lan966x_hwmon_of_match[] = {
 	{ .compatible = "microchip,lan9668-hwmon" },
 	{}
 };
 MODULE_DEVICE_TABLE(of, lan966x_hwmon_of_match);

 static struct platform_driver lan966x_hwmon_driver = {
 	.probe = lan966x_hwmon_probe,
 	.driver = {
 		.name = "lan966x-hwmon",
 		.of_match_table = lan966x_hwmon_of_match,
 	},
 };
 module_platform_driver(lan966x_hwmon_driver);

 MODULE_DESCRIPTION("LAN966x Hardware Monitoring Driver");
 MODULE_AUTHOR("Michael Walle <michael@walle.cc>");
 MODULE_LICENSE("GPL");
	// SPDX-License-Identifier: GPL-2.0-only

	#include <linux/bitfield.h>
	#include <linux/clk.h>
	#include <linux/hwmon.h>
	#include <linux/kernel.h>
	#include <linux/module.h>
	#include <linux/mod_devicetable.h>
	#include <linux/platform_device.h>
	#include <linux/polynomial.h>
	#include <linux/regmap.h>

	/*
	* The original translation formulae of the temperature (in degrees of Celsius)
	* are as follows:
	*
	* T = -3.4627e-11(N^4) + 1.1023e-7(N^3) + -1.9165e-4*(N^2) +
	* 3.0604e-1*(N^1) + -5.6197e1
	*
	* where [-56.197, 136.402]C and N = [0, 1023].
	*
	* They must be accordingly altered to be suitable for the integer arithmetics.
	* The technique is called 'factor redistribution', which just makes sure the
	* multiplications and divisions are made so to have a result of the operations
	* within the integer numbers limit. In addition we need to translate the
	* formulae to accept millidegrees of Celsius. Here what it looks like after
	* the alterations:
	*
	* T = -34627e-12(N^4) + 110230e-9(N^3) + -191650e-6*(N^2) +
	* 306040e-3*(N^1) + -56197
	*
	* where T = [-56197, 136402]mC and N = [0, 1023].
	*/

	static const struct polynomial poly_N_to_temp = {
	.terms = {
	{4, -34627, 1000, 1},
	{3, 110230, 1000, 1},
	{2, -191650, 1000, 1},
	{1, 306040, 1000, 1},
	{0, -56197, 1, 1}
	}
	};

	#define PVT_SENSOR_CTRL 0x0 /* unused */
	#define PVT_SENSOR_CFG 0x4
	#define SENSOR_CFG_CLK_CFG GENMASK(27, 20)
	#define SENSOR_CFG_TRIM_VAL GENMASK(13, 9)
	#define SENSOR_CFG_SAMPLE_ENA BIT(8)
	#define SENSOR_CFG_START_CAPTURE BIT(7)
	#define SENSOR_CFG_CONTINIOUS_MODE BIT(6)
	#define SENSOR_CFG_PSAMPLE_ENA GENMASK(1, 0)
	#define PVT_SENSOR_STAT 0x8
	#define SENSOR_STAT_DATA_VALID BIT(10)
	#define SENSOR_STAT_DATA GENMASK(9, 0)

	#define FAN_CFG 0x0
	#define FAN_CFG_DUTY_CYCLE GENMASK(23, 16)
	#define INV_POL BIT(3)
	#define GATE_ENA BIT(2)
	#define PWM_OPEN_COL_ENA BIT(1)
	#define FAN_STAT_CFG BIT(0)
	#define FAN_PWM_FREQ 0x4
	#define FAN_PWM_CYC_10US GENMASK(25, 15)
	#define FAN_PWM_FREQ_FREQ GENMASK(14, 0)
	#define FAN_CNT 0xc
	#define FAN_CNT_DATA GENMASK(15, 0)

	#define LAN966X_PVT_CLK 1200000 /* 1.2 MHz */

	struct lan966x_hwmon {
	struct regmap *regmap_pvt;
	struct regmap *regmap_fan;
	struct clk *clk;
	unsigned long clk_rate;
	};

	static int lan966x_hwmon_read_temp(struct device dev, long val)
	{
	struct lan966x_hwmon *hwmon = dev_get_drvdata(dev);
	unsigned int data;
	int ret;

	ret = regmap_read(hwmon->regmap_pvt, PVT_SENSOR_STAT, &data);
	if (ret < 0)
	return ret;

	if (!(data & SENSOR_STAT_DATA_VALID))
	return -ENODATA;

	*val = polynomial_calc(&poly_N_to_temp,
	FIELD_GET(SENSOR_STAT_DATA, data));

	return 0;
	}

	static int lan966x_hwmon_read_fan(struct device dev, long val)
	{
	struct lan966x_hwmon *hwmon = dev_get_drvdata(dev);
	unsigned int data;
	int ret;

	ret = regmap_read(hwmon->regmap_fan, FAN_CNT, &data);
	if (ret < 0)
	return ret;

	/*
	* Data is given in pulses per second. Assume two pulses
	* per revolution.
	*/
	val = FIELD_GET(FAN_CNT_DATA, data) 60 / 2;

	return 0;
	}

	static int lan966x_hwmon_read_pwm(struct device dev, long val)
	{
	struct lan966x_hwmon *hwmon = dev_get_drvdata(dev);
	unsigned int data;
	int ret;

	ret = regmap_read(hwmon->regmap_fan, FAN_CFG, &data);
	if (ret < 0)
	return ret;

	*val = FIELD_GET(FAN_CFG_DUTY_CYCLE, data);

	return 0;
	}

	static int lan966x_hwmon_read_pwm_freq(struct device dev, long val)
	{
	struct lan966x_hwmon *hwmon = dev_get_drvdata(dev);
	unsigned long tmp;
	unsigned int data;
	int ret;

	ret = regmap_read(hwmon->regmap_fan, FAN_PWM_FREQ, &data);
	if (ret < 0)
	return ret;

	/*
	* Datasheet says it is sys_clk / 256 / pwm_freq. But in reality
	* it is sys_clk / 256 / (pwm_freq + 1).
	*/
	data = FIELD_GET(FAN_PWM_FREQ_FREQ, data) + 1;
	tmp = DIV_ROUND_CLOSEST(hwmon->clk_rate, 256);
	*val = DIV_ROUND_CLOSEST(tmp, data);

	return 0;
	}

	static int lan966x_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
	u32 attr, int channel, long *val)
	{
	switch (type) {
	case hwmon_temp:
	return lan966x_hwmon_read_temp(dev, val);
	case hwmon_fan:
	return lan966x_hwmon_read_fan(dev, val);
	case hwmon_pwm:
	switch (attr) {
	case hwmon_pwm_input:
	return lan966x_hwmon_read_pwm(dev, val);
	case hwmon_pwm_freq:
	return lan966x_hwmon_read_pwm_freq(dev, val);
	default:
	return -EOPNOTSUPP;
	}
	default:
	return -EOPNOTSUPP;
	}
	}

	static int lan966x_hwmon_write_pwm(struct device *dev, long val)
	{
	struct lan966x_hwmon *hwmon = dev_get_drvdata(dev);

	if (val < 0 \|\| val > 255)
	return -EINVAL;

	return regmap_update_bits(hwmon->regmap_fan, FAN_CFG,
	FAN_CFG_DUTY_CYCLE,
	FIELD_PREP(FAN_CFG_DUTY_CYCLE, val));
	}

	static int lan966x_hwmon_write_pwm_freq(struct device *dev, long val)
	{
	struct lan966x_hwmon *hwmon = dev_get_drvdata(dev);

	if (val <= 0)
	return -EINVAL;

	val = DIV_ROUND_CLOSEST(hwmon->clk_rate, val);
	val = DIV_ROUND_CLOSEST(val, 256) - 1;
	val = clamp_val(val, 0, FAN_PWM_FREQ_FREQ);

	return regmap_update_bits(hwmon->regmap_fan, FAN_PWM_FREQ,
	FAN_PWM_FREQ_FREQ,
	FIELD_PREP(FAN_PWM_FREQ_FREQ, val));
	}

	static int lan966x_hwmon_write(struct device *dev, enum hwmon_sensor_types type,
	u32 attr, int channel, long val)
	{
	switch (type) {
	case hwmon_pwm:
	switch (attr) {
	case hwmon_pwm_input:
	return lan966x_hwmon_write_pwm(dev, val);
	case hwmon_pwm_freq:
	return lan966x_hwmon_write_pwm_freq(dev, val);
	default:
	return -EOPNOTSUPP;
	}
	default:
	return -EOPNOTSUPP;
	}
	}

	static umode_t lan966x_hwmon_is_visible(const void *data,
	enum hwmon_sensor_types type,
	u32 attr, int channel)
	{
	umode_t mode = 0;

	switch (type) {
	case hwmon_temp:
	switch (attr) {
	case hwmon_temp_input:
	mode = 0444;
	break;
	default:
	break;
	}
	break;
	case hwmon_fan:
	switch (attr) {
	case hwmon_fan_input:
	mode = 0444;
	break;
	default:
	break;
	}
	break;
	case hwmon_pwm:
	switch (attr) {
	case hwmon_pwm_input:
	case hwmon_pwm_freq:
	mode = 0644;
	break;
	default:
	break;
	}
	break;
	default:
	break;
	}

	return mode;
	}

	static const struct hwmon_channel_info *lan966x_hwmon_info[] = {
	HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ),
	HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT),
	HWMON_CHANNEL_INFO(fan, HWMON_F_INPUT),
	HWMON_CHANNEL_INFO(pwm, HWMON_PWM_INPUT \| HWMON_PWM_FREQ),
	NULL
	};

	static const struct hwmon_ops lan966x_hwmon_ops = {
	.is_visible = lan966x_hwmon_is_visible,
	.read = lan966x_hwmon_read,
	.write = lan966x_hwmon_write,
	};

	static const struct hwmon_chip_info lan966x_hwmon_chip_info = {
	.ops = &lan966x_hwmon_ops,
	.info = lan966x_hwmon_info,
	};

	static void lan966x_hwmon_disable(void *data)
	{
	struct lan966x_hwmon *hwmon = data;

	regmap_update_bits(hwmon->regmap_pvt, PVT_SENSOR_CFG,
	SENSOR_CFG_SAMPLE_ENA \| SENSOR_CFG_CONTINIOUS_MODE,
	0);
	}

	static int lan966x_hwmon_enable(struct device *dev,
	struct lan966x_hwmon *hwmon)
	{
	unsigned int mask = SENSOR_CFG_CLK_CFG \|
	SENSOR_CFG_SAMPLE_ENA \|
	SENSOR_CFG_START_CAPTURE \|
	SENSOR_CFG_CONTINIOUS_MODE \|
	SENSOR_CFG_PSAMPLE_ENA;
	unsigned int val;
	unsigned int div;
	int ret;

	/* enable continuous mode */
	val = SENSOR_CFG_SAMPLE_ENA \| SENSOR_CFG_CONTINIOUS_MODE;

	/* set PVT clock to be between 1.15 and 1.25 MHz */
	div = DIV_ROUND_CLOSEST(hwmon->clk_rate, LAN966X_PVT_CLK);
	val \|= FIELD_PREP(SENSOR_CFG_CLK_CFG, div);

	ret = regmap_update_bits(hwmon->regmap_pvt, PVT_SENSOR_CFG,
	mask, val);
	if (ret)
	return ret;

	return devm_add_action_or_reset(dev, lan966x_hwmon_disable, hwmon);
	}

	static struct regmap lan966x_init_regmap(struct platform_device pdev,
	const char *name)
	{
	struct regmap_config regmap_config = {
	.reg_bits = 32,
	.reg_stride = 4,
	.val_bits = 32,
	};
	void __iomem *base;

	base = devm_platform_ioremap_resource_byname(pdev, name);
	if (IS_ERR(base))
	return ERR_CAST(base);

	regmap_config.name = name;

	return devm_regmap_init_mmio(&pdev->dev, base, &regmap_config);
	}

	static void lan966x_clk_disable(void *data)
	{
	struct lan966x_hwmon *hwmon = data;

	clk_disable_unprepare(hwmon->clk);
	}

	static int lan966x_clk_enable(struct device dev, struct lan966x_hwmon hwmon)
	{
	int ret;

	ret = clk_prepare_enable(hwmon->clk);
	if (ret)
	return ret;

	return devm_add_action_or_reset(dev, lan966x_clk_disable, hwmon);
	}

	static int lan966x_hwmon_probe(struct platform_device *pdev)
	{
	struct device *dev = &pdev->dev;
	struct lan966x_hwmon *hwmon;
	struct device *hwmon_dev;
	int ret;

	hwmon = devm_kzalloc(dev, sizeof(*hwmon), GFP_KERNEL);
	if (!hwmon)
	return -ENOMEM;

	hwmon->clk = devm_clk_get(dev, NULL);
	if (IS_ERR(hwmon->clk))
	return dev_err_probe(dev, PTR_ERR(hwmon->clk),
	"failed to get clock\n");

	ret = lan966x_clk_enable(dev, hwmon);
	if (ret)
	return dev_err_probe(dev, ret, "failed to enable clock\n");

	hwmon->clk_rate = clk_get_rate(hwmon->clk);

	hwmon->regmap_pvt = lan966x_init_regmap(pdev, "pvt");
	if (IS_ERR(hwmon->regmap_pvt))
	return dev_err_probe(dev, PTR_ERR(hwmon->regmap_pvt),
	"failed to get regmap for PVT registers\n");

	hwmon->regmap_fan = lan966x_init_regmap(pdev, "fan");
	if (IS_ERR(hwmon->regmap_fan))
	return dev_err_probe(dev, PTR_ERR(hwmon->regmap_fan),
	"failed to get regmap for fan registers\n");

	ret = lan966x_hwmon_enable(dev, hwmon);
	if (ret)
	return dev_err_probe(dev, ret, "failed to enable sensor\n");

	hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev,
	"lan966x_hwmon", hwmon,
	&lan966x_hwmon_chip_info, NULL);
	if (IS_ERR(hwmon_dev))
	return dev_err_probe(dev, PTR_ERR(hwmon_dev),
	"failed to register hwmon device\n");

	return 0;
	}

	static const struct of_device_id lan966x_hwmon_of_match[] = {
	{ .compatible = "microchip,lan9668-hwmon" },
	{}
	};
	MODULE_DEVICE_TABLE(of, lan966x_hwmon_of_match);

	static struct platform_driver lan966x_hwmon_driver = {
	.probe = lan966x_hwmon_probe,
	.driver = {
	.name = "lan966x-hwmon",
	.of_match_table = lan966x_hwmon_of_match,
	},
	};
	module_platform_driver(lan966x_hwmon_driver);

	MODULE_DESCRIPTION("LAN966x Hardware Monitoring Driver");
	MODULE_AUTHOR("Michael Walle <michael@walle.cc>");
	MODULE_LICENSE("GPL");