drivers/misc/Kconfig - third_party/kernel - Git at Google


            
            # SPDX-License-Identifier: GPL-2.0-only

            
            #

            
            # Misc strange devices

            
            #


            menu "Misc devices"


            config SENSORS_LIS3LV02D

            
            	tristate

            
            	depends on INPUT


            config AD525X_DPOT

            
            	tristate "Analog Devices Digital Potentiometers"

            
            	depends on (I2C || SPI) && SYSFS

            
            	help

            
            	  If you say yes here, you get support for the Analog Devices

            
            	  AD5258, AD5259, AD5251, AD5252, AD5253, AD5254, AD5255

            
            	  AD5160, AD5161, AD5162, AD5165, AD5200, AD5201, AD5203,

            
            	  AD5204, AD5206, AD5207, AD5231, AD5232, AD5233, AD5235,

            
            	  AD5260, AD5262, AD5263, AD5290, AD5291, AD5292, AD5293,

            
            	  AD7376, AD8400, AD8402, AD8403, ADN2850, AD5241, AD5242,

            
            	  AD5243, AD5245, AD5246, AD5247, AD5248, AD5280, AD5282,

            
            	  ADN2860, AD5273, AD5171, AD5170, AD5172, AD5173, AD5270,

            
            	  AD5271, AD5272, AD5274

            
            	  digital potentiometer chips.


            	  See Documentation/misc-devices/ad525x_dpot.rst for the

            
            	  userspace interface.


            	  This driver can also be built as a module.  If so, the module

            
            	  will be called ad525x_dpot.


            config AD525X_DPOT_I2C

            
            	tristate "support I2C bus connection"

            
            	depends on AD525X_DPOT && I2C

            
            	help

            
            	  Say Y here if you have a digital potentiometers hooked to an I2C bus.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called ad525x_dpot-i2c.


            config AD525X_DPOT_SPI

            
            	tristate "support SPI bus connection"

            
            	depends on AD525X_DPOT && SPI_MASTER

            
            	help

            
            	  Say Y here if you have a digital potentiometers hooked to an SPI bus.


            	  If unsure, say N (but it's safe to say "Y").


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called ad525x_dpot-spi.


            config ATMEL_TCLIB

            
            	bool "Atmel AT32/AT91 Timer/Counter Library"

            
            	depends on ARCH_AT91

            
            	help

            
            	  Select this if you want a library to allocate the Timer/Counter

            
            	  blocks found on many Atmel processors.  This facilitates using

            
            	  these blocks by different drivers despite processor differences.


            config DUMMY_IRQ

            
            	tristate "Dummy IRQ handler"

            
            	help

            
            	  This module accepts a single 'irq' parameter, which it should register for.

            
            	  The sole purpose of this module is to help with debugging of systems on

            
            	  which spurious IRQs would happen on disabled IRQ vector.


            config IBM_ASM

            
            	tristate "Device driver for IBM RSA service processor"

            
            	depends on X86 && PCI && INPUT

            
            	depends on SERIAL_8250 || SERIAL_8250=n

            
            	help

            
            	  This option enables device driver support for in-band access to the

            
            	  IBM RSA (Condor) service processor in eServer xSeries systems.

            
            	  The ibmasm device driver allows user space application to access

            
            	  ASM (Advanced Systems Management) functions on the service

            
            	  processor. The driver is meant to be used in conjunction with

            
            	  a user space API.

            
            	  The ibmasm driver also enables the OS to use the UART on the

            
            	  service processor board as a regular serial port. To make use of

            
            	  this feature serial driver support (CONFIG_SERIAL_8250) must be

            
            	  enabled.


            	  WARNING: This software may not be supported or function

            
            	  correctly on your IBM server. Please consult the IBM ServerProven

            
            	  website <https://www-03.ibm.com/systems/info/x86servers/serverproven/compat/us/>

            
            	  for information on the specific driver level and support statement

            
            	  for your IBM server.


            config IBMVMC

            
            	tristate "IBM Virtual Management Channel support"

            
            	depends on PPC_PSERIES

            
            	help

            
            	  This is the IBM POWER Virtual Management Channel


            	  This driver is to be used for the POWER Virtual

            
            	  Management Channel virtual adapter on the PowerVM

            
            	  platform. It provides both request/response and

            
            	  async message support through the /dev/ibmvmc node.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called ibmvmc.


            config PHANTOM

            
            	tristate "Sensable PHANToM (PCI)"

            
            	depends on PCI

            
            	help

            
            	  Say Y here if you want to build a driver for Sensable PHANToM device.


            	  This driver is only for PCI PHANToMs.


            	  If you choose to build module, its name will be phantom. If unsure,

            
            	  say N here.


            config INTEL_MID_PTI

            
            	tristate "Parallel Trace Interface for MIPI P1149.7 cJTAG standard"

            
            	depends on PCI && TTY && (X86_INTEL_MID || COMPILE_TEST)

            
            	help

            
            	  The PTI (Parallel Trace Interface) driver directs

            
            	  trace data routed from various parts in the system out

            
            	  through an Intel Penwell PTI port and out of the mobile

            
            	  device for analysis with a debugging tool (Lauterbach or Fido).


            	  You should select this driver if the target kernel is meant for

            
            	  an Intel Atom (non-netbook) mobile device containing a MIPI

            
            	  P1149.7 standard implementation.


            config TIFM_CORE

            
            	tristate "TI Flash Media interface support"

            
            	depends on PCI

            
            	help

            
            	  If you want support for Texas Instruments(R) Flash Media adapters

            
            	  you should select this option and then also choose an appropriate

            
            	  host adapter, such as 'TI Flash Media PCI74xx/PCI76xx host adapter

            
            	  support', if you have a TI PCI74xx compatible card reader, for

            
            	  example.

            
            	  You will also have to select some flash card format drivers. MMC/SD

            
            	  cards are supported via 'MMC/SD Card support: TI Flash Media MMC/SD

            
            	  Interface support (MMC_TIFM_SD)'.


            	  To compile this driver as a module, choose M here: the module will

            
            	  be called tifm_core.


            config TIFM_7XX1

            
            	tristate "TI Flash Media PCI74xx/PCI76xx host adapter support"

            
            	depends on PCI && TIFM_CORE

            
            	default TIFM_CORE

            
            	help

            
            	  This option enables support for Texas Instruments(R) PCI74xx and

            
            	  PCI76xx families of Flash Media adapters, found in many laptops.

            
            	  To make actual use of the device, you will have to select some

            
            	  flash card format drivers, as outlined in the TIFM_CORE Help.


            	  To compile this driver as a module, choose M here: the module will

            
            	  be called tifm_7xx1.


            config ICS932S401

            
            	tristate "Integrated Circuits ICS932S401"

            
            	depends on I2C

            
            	help

            
            	  If you say yes here you get support for the Integrated Circuits

            
            	  ICS932S401 clock control chips.


            	  This driver can also be built as a module. If so, the module

            
            	  will be called ics932s401.


            config ATMEL_SSC

            
            	tristate "Device driver for Atmel SSC peripheral"

            
            	depends on HAS_IOMEM && (ARCH_AT91 || COMPILE_TEST)

            
            	help

            
            	  This option enables device driver support for Atmel Synchronized

            
            	  Serial Communication peripheral (SSC).


            	  The SSC peripheral supports a wide variety of serial frame based

            
            	  communications, i.e. I2S, SPI, etc.


            	  If unsure, say N.


            config ENCLOSURE_SERVICES

            
            	tristate "Enclosure Services"

            
            	help

            
            	  Provides support for intelligent enclosures (bays which

            
            	  contain storage devices).  You also need either a host

            
            	  driver (SCSI/ATA) which supports enclosures

            
            	  or a SCSI enclosure device (SES) to use these services.


            config SGI_XP

            
            	tristate "Support communication between SGI SSIs"

            
            	depends on NET

            
            	depends on (IA64_SGI_UV || X86_UV) && SMP

            
            	depends on X86_64 || BROKEN

            
            	select SGI_GRU if X86_64 && SMP

            
            	help

            
            	  An SGI machine can be divided into multiple Single System

            
            	  Images which act independently of each other and have

            
            	  hardware based memory protection from the others.  Enabling

            
            	  this feature will allow for direct communication between SSIs

            
            	  based on a network adapter and DMA messaging.


            config CS5535_MFGPT

            
            	tristate "CS5535/CS5536 Geode Multi-Function General Purpose Timer (MFGPT) support"

            
            	depends on MFD_CS5535

            
            	help

            
            	  This driver provides access to MFGPT functionality for other

            
            	  drivers that need timers.  MFGPTs are available in the CS5535 and

            
            	  CS5536 companion chips that are found in AMD Geode and several

            
            	  other platforms.  They have a better resolution and max interval

            
            	  than the generic PIT, and are suitable for use as high-res timers.

            
            	  You probably don't want to enable this manually; other drivers that

            
            	  make use of it should enable it.


            config CS5535_MFGPT_DEFAULT_IRQ

            
            	int

            
            	depends on CS5535_MFGPT

            
            	default 7

            
            	help

            
            	  MFGPTs on the CS5535 require an interrupt.  The selected IRQ

            
            	  can be overridden as a module option as well as by driver that

            
            	  use the cs5535_mfgpt_ API; however, different architectures might

            
            	  want to use a different IRQ by default.  This is here for

            
            	  architectures to set as necessary.


            config CS5535_CLOCK_EVENT_SRC

            
            	tristate "CS5535/CS5536 high-res timer (MFGPT) events"

            
            	depends on GENERIC_CLOCKEVENTS && CS5535_MFGPT

            
            	help

            
            	  This driver provides a clock event source based on the MFGPT

            
            	  timer(s) in the CS5535 and CS5536 companion chips.

            
            	  MFGPTs have a better resolution and max interval than the

            
            	  generic PIT, and are suitable for use as high-res timers.


            config HP_ILO

            
            	tristate "Channel interface driver for the HP iLO processor"

            
            	depends on PCI

            
            	help

            
            	  The channel interface driver allows applications to communicate

            
            	  with iLO management processors present on HP ProLiant servers.

            
            	  Upon loading, the driver creates /dev/hpilo/dXccbN files, which

            
            	  can be used to gather data from the management processor, via

            
            	  read and write system calls.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called hpilo.


            config QCOM_COINCELL

            
            	tristate "Qualcomm coincell charger support"

            
            	depends on MFD_SPMI_PMIC || COMPILE_TEST

            
            	help

            
            	  This driver supports the coincell block found inside of

            
            	  Qualcomm PMICs.  The coincell charger provides a means to

            
            	  charge a coincell battery or backup capacitor which is used

            
            	  to maintain PMIC register and RTC state in the absence of

            
            	  external power.


            config QCOM_FASTRPC

            
            	tristate "Qualcomm FastRPC"

            
            	depends on ARCH_QCOM || COMPILE_TEST

            
            	depends on RPMSG

            
            	select DMA_SHARED_BUFFER

            
            	help

            
            	  Provides a communication mechanism that allows for clients to

            
            	  make remote method invocations across processor boundary to

            
            	  applications DSP processor. Say M if you want to enable this

            
            	  module.


            config SGI_GRU

            
            	tristate "SGI GRU driver"

            
            	depends on X86_UV && SMP

            
            	select MMU_NOTIFIER

            
            	help

            
            	The GRU is a hardware resource located in the system chipset. The GRU

            
            	contains memory that can be mmapped into the user address space. This memory is

            
            	used to communicate with the GRU to perform functions such as load/store,

            
            	scatter/gather, bcopy, AMOs, etc.  The GRU is directly accessed by user

            
            	instructions using user virtual addresses. GRU instructions (ex., bcopy) use

            
            	user virtual addresses for operands.


            	If you are not running on a SGI UV system, say N.


            config SGI_GRU_DEBUG

            
            	bool  "SGI GRU driver debug"

            
            	depends on SGI_GRU

            
            	help

            
            	This option enables additional debugging code for the SGI GRU driver.

            
            	If you are unsure, say N.


            config APDS9802ALS

            
            	tristate "Medfield Avago APDS9802 ALS Sensor module"

            
            	depends on I2C

            
            	help

            
            	  If you say yes here you get support for the ALS APDS9802 ambient

            
            	  light sensor.


            	  This driver can also be built as a module.  If so, the module

            
            	  will be called apds9802als.


            config ISL29003

            
            	tristate "Intersil ISL29003 ambient light sensor"

            
            	depends on I2C && SYSFS

            
            	help

            
            	  If you say yes here you get support for the Intersil ISL29003

            
            	  ambient light sensor.


            	  This driver can also be built as a module.  If so, the module

            
            	  will be called isl29003.


            config ISL29020

            
            	tristate "Intersil ISL29020 ambient light sensor"

            
            	depends on I2C

            
            	help

            
            	  If you say yes here you get support for the Intersil ISL29020

            
            	  ambient light sensor.


            	  This driver can also be built as a module.  If so, the module

            
            	  will be called isl29020.


            config SENSORS_TSL2550

            
            	tristate "Taos TSL2550 ambient light sensor"

            
            	depends on I2C && SYSFS

            
            	help

            
            	  If you say yes here you get support for the Taos TSL2550

            
            	  ambient light sensor.


            	  This driver can also be built as a module.  If so, the module

            
            	  will be called tsl2550.


            config SENSORS_BH1770

            
            	 tristate "BH1770GLC / SFH7770 combined ALS - Proximity sensor"

            
            	 depends on I2C

            
            	help

            
            	   Say Y here if you want to build a driver for BH1770GLC (ROHM) or

            
            	   SFH7770 (Osram) combined ambient light and proximity sensor chip.


            	   To compile this driver as a module, choose M here: the

            
            	   module will be called bh1770glc. If unsure, say N here.


            config SENSORS_APDS990X

            
            	 tristate "APDS990X combined als and proximity sensors"

            
            	 depends on I2C

            
            	help

            
            	   Say Y here if you want to build a driver for Avago APDS990x

            
            	   combined ambient light and proximity sensor chip.


            	   To compile this driver as a module, choose M here: the

            
            	   module will be called apds990x. If unsure, say N here.


            config HMC6352

            
            	tristate "Honeywell HMC6352 compass"

            
            	depends on I2C

            
            	help

            
            	  This driver provides support for the Honeywell HMC6352 compass,

            
            	  providing configuration and heading data via sysfs.


            config DS1682

            
            	tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm"

            
            	depends on I2C

            
            	help

            
            	  If you say yes here you get support for Dallas Semiconductor

            
            	  DS1682 Total Elapsed Time Recorder.


            	  This driver can also be built as a module.  If so, the module

            
            	  will be called ds1682.


            config VMWARE_BALLOON

            
            	tristate "VMware Balloon Driver"

            
            	depends on VMWARE_VMCI && X86 && HYPERVISOR_GUEST

            
            	select MEMORY_BALLOON

            
            	help

            
            	  This is VMware physical memory management driver which acts

            
            	  like a "balloon" that can be inflated to reclaim physical pages

            
            	  by reserving them in the guest and invalidating them in the

            
            	  monitor, freeing up the underlying machine pages so they can

            
            	  be allocated to other guests. The balloon can also be deflated

            
            	  to allow the guest to use more physical memory.


            	  If unsure, say N.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called vmw_balloon.


            config PCH_PHUB

            
            	tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) PHUB"

            
            	select GENERIC_NET_UTILS

            
            	depends on PCI && (X86_32 || MIPS || COMPILE_TEST)

            
            	help

            
            	  This driver is for PCH(Platform controller Hub) PHUB(Packet Hub) of

            
            	  Intel Topcliff which is an IOH(Input/Output Hub) for x86 embedded

            
            	  processor. The Topcliff has MAC address and Option ROM data in SROM.

            
            	  This driver can access MAC address and Option ROM data in SROM.


            	  This driver also can be used for LAPIS Semiconductor's IOH,

            
            	  ML7213/ML7223/ML7831.

            
            	  ML7213 which is for IVI(In-Vehicle Infotainment) use.

            
            	  ML7223 IOH is for MP(Media Phone) use.

            
            	  ML7831 IOH is for general purpose use.

            
            	  ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.

            
            	  ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.


            	  To compile this driver as a module, choose M here: the module will

            
            	  be called pch_phub.


            config LATTICE_ECP3_CONFIG

            
            	tristate "Lattice ECP3 FPGA bitstream configuration via SPI"

            
            	depends on SPI && SYSFS

            
            	select FW_LOADER

            
            	default	n

            
            	help

            
            	  This option enables support for bitstream configuration (programming

            
            	  or loading) of the Lattice ECP3 FPGA family via SPI.


            	  If unsure, say N.


            config SRAM

            
            	bool "Generic on-chip SRAM driver"

            
            	depends on HAS_IOMEM

            
            	select GENERIC_ALLOCATOR

            
            	select SRAM_EXEC if ARM

            
            	help

            
            	  This driver allows you to declare a memory region to be managed by

            
            	  the genalloc API. It is supposed to be used for small on-chip SRAM

            
            	  areas found on many SoCs.


            config SRAM_EXEC

            
            	bool


            config PCI_ENDPOINT_TEST

            
            	depends on PCI

            
            	select CRC32

            
            	tristate "PCI Endpoint Test driver"

            
            	help

            
            	   Enable this configuration option to enable the host side test driver

            
            	   for PCI Endpoint.


            config XILINX_SDFEC

            
            	tristate "Xilinx SDFEC 16"

            
            	depends on HAS_IOMEM

            
            	help

            
            	  This option enables support for the Xilinx SDFEC (Soft Decision

            
            	  Forward Error Correction) driver. This enables a char driver

            
            	  for the SDFEC.


            	  You may select this driver if your design instantiates the

            
            	  SDFEC(16nm) hardened block. To compile this as a module choose M.


            	  If unsure, say N.


            config MISC_RTSX

            
            	tristate

            
            	default MISC_RTSX_PCI || MISC_RTSX_USB


            config PVPANIC

            
            	tristate "pvpanic device support"

            
            	depends on HAS_IOMEM && (ACPI || OF)

            
            	help

            
            	  This driver provides support for the pvpanic device.  pvpanic is

            
            	  a paravirtualized device provided by QEMU; it lets a virtual machine

            
            	  (guest) communicate panic events to the host.


            config HISI_HIKEY_USB

            
            	tristate "USB GPIO Hub on HiSilicon Hikey 960/970 Platform"

            
            	depends on (OF && GPIOLIB) || COMPILE_TEST

            
            	depends on USB_ROLE_SWITCH

            
            	help

            
            	  If you say yes here this adds support for the on-board USB GPIO hub

            
            	  found on HiKey 960/970 boards, which is necessary to support

            
            	  switching between the dual-role USB-C port and the USB-A host ports

            
            	  using only one USB controller.


            source "drivers/misc/c2port/Kconfig"

            
            source "drivers/misc/eeprom/Kconfig"

            
            source "drivers/misc/cb710/Kconfig"

            
            source "drivers/misc/ti-st/Kconfig"

            
            source "drivers/misc/lis3lv02d/Kconfig"

            
            source "drivers/misc/altera-stapl/Kconfig"

            
            source "drivers/misc/mei/Kconfig"

            
            source "drivers/misc/vmw_vmci/Kconfig"

            
            source "drivers/misc/genwqe/Kconfig"

            
            source "drivers/misc/echo/Kconfig"

            
            source "drivers/misc/cxl/Kconfig"

            
            source "drivers/misc/ocxl/Kconfig"

            
            source "drivers/misc/cardreader/Kconfig"

            
            source "drivers/misc/habanalabs/Kconfig"

            
            source "drivers/misc/uacce/Kconfig"

            
            endmenu
	# SPDX-License-Identifier: GPL-2.0-only
	#
	# Misc strange devices
	#

	menu "Misc devices"

	config SENSORS_LIS3LV02D
	tristate
	depends on INPUT

	config AD525X_DPOT
	tristate "Analog Devices Digital Potentiometers"
	depends on (I2C \|\| SPI) && SYSFS
	help
	If you say yes here, you get support for the Analog Devices
	AD5258, AD5259, AD5251, AD5252, AD5253, AD5254, AD5255
	AD5160, AD5161, AD5162, AD5165, AD5200, AD5201, AD5203,
	AD5204, AD5206, AD5207, AD5231, AD5232, AD5233, AD5235,
	AD5260, AD5262, AD5263, AD5290, AD5291, AD5292, AD5293,
	AD7376, AD8400, AD8402, AD8403, ADN2850, AD5241, AD5242,
	AD5243, AD5245, AD5246, AD5247, AD5248, AD5280, AD5282,
	ADN2860, AD5273, AD5171, AD5170, AD5172, AD5173, AD5270,
	AD5271, AD5272, AD5274
	digital potentiometer chips.

	See Documentation/misc-devices/ad525x_dpot.rst for the
	userspace interface.

	This driver can also be built as a module. If so, the module
	will be called ad525x_dpot.

	config AD525X_DPOT_I2C
	tristate "support I2C bus connection"
	depends on AD525X_DPOT && I2C
	help
	Say Y here if you have a digital potentiometers hooked to an I2C bus.

	To compile this driver as a module, choose M here: the
	module will be called ad525x_dpot-i2c.

	config AD525X_DPOT_SPI
	tristate "support SPI bus connection"
	depends on AD525X_DPOT && SPI_MASTER
	help
	Say Y here if you have a digital potentiometers hooked to an SPI bus.

	If unsure, say N (but it's safe to say "Y").

	To compile this driver as a module, choose M here: the
	module will be called ad525x_dpot-spi.

	config ATMEL_TCLIB
	bool "Atmel AT32/AT91 Timer/Counter Library"
	depends on ARCH_AT91
	help
	Select this if you want a library to allocate the Timer/Counter
	blocks found on many Atmel processors. This facilitates using
	these blocks by different drivers despite processor differences.

	config DUMMY_IRQ
	tristate "Dummy IRQ handler"
	help
	This module accepts a single 'irq' parameter, which it should register for.
	The sole purpose of this module is to help with debugging of systems on
	which spurious IRQs would happen on disabled IRQ vector.

	config IBM_ASM
	tristate "Device driver for IBM RSA service processor"
	depends on X86 && PCI && INPUT
	depends on SERIAL_8250 \|\| SERIAL_8250=n
	help
	This option enables device driver support for in-band access to the
	IBM RSA (Condor) service processor in eServer xSeries systems.
	The ibmasm device driver allows user space application to access
	ASM (Advanced Systems Management) functions on the service
	processor. The driver is meant to be used in conjunction with
	a user space API.
	The ibmasm driver also enables the OS to use the UART on the
	service processor board as a regular serial port. To make use of
	this feature serial driver support (CONFIG_SERIAL_8250) must be
	enabled.

	WARNING: This software may not be supported or function
	correctly on your IBM server. Please consult the IBM ServerProven
	website <https://www-03.ibm.com/systems/info/x86servers/serverproven/compat/us/>
	for information on the specific driver level and support statement
	for your IBM server.

	config IBMVMC
	tristate "IBM Virtual Management Channel support"
	depends on PPC_PSERIES
	help
	This is the IBM POWER Virtual Management Channel

	This driver is to be used for the POWER Virtual
	Management Channel virtual adapter on the PowerVM
	platform. It provides both request/response and
	async message support through the /dev/ibmvmc node.

	To compile this driver as a module, choose M here: the
	module will be called ibmvmc.

	config PHANTOM
	tristate "Sensable PHANToM (PCI)"
	depends on PCI
	help
	Say Y here if you want to build a driver for Sensable PHANToM device.

	This driver is only for PCI PHANToMs.

	If you choose to build module, its name will be phantom. If unsure,
	say N here.

	config INTEL_MID_PTI
	tristate "Parallel Trace Interface for MIPI P1149.7 cJTAG standard"
	depends on PCI && TTY && (X86_INTEL_MID \|\| COMPILE_TEST)
	help
	The PTI (Parallel Trace Interface) driver directs
	trace data routed from various parts in the system out
	through an Intel Penwell PTI port and out of the mobile
	device for analysis with a debugging tool (Lauterbach or Fido).

	You should select this driver if the target kernel is meant for
	an Intel Atom (non-netbook) mobile device containing a MIPI
	P1149.7 standard implementation.

	config TIFM_CORE
	tristate "TI Flash Media interface support"
	depends on PCI
	help
	If you want support for Texas Instruments(R) Flash Media adapters
	you should select this option and then also choose an appropriate
	host adapter, such as 'TI Flash Media PCI74xx/PCI76xx host adapter
	support', if you have a TI PCI74xx compatible card reader, for
	example.
	You will also have to select some flash card format drivers. MMC/SD
	cards are supported via 'MMC/SD Card support: TI Flash Media MMC/SD
	Interface support (MMC_TIFM_SD)'.

	To compile this driver as a module, choose M here: the module will
	be called tifm_core.

	config TIFM_7XX1
	tristate "TI Flash Media PCI74xx/PCI76xx host adapter support"
	depends on PCI && TIFM_CORE
	default TIFM_CORE
	help
	This option enables support for Texas Instruments(R) PCI74xx and
	PCI76xx families of Flash Media adapters, found in many laptops.
	To make actual use of the device, you will have to select some
	flash card format drivers, as outlined in the TIFM_CORE Help.

	To compile this driver as a module, choose M here: the module will
	be called tifm_7xx1.

	config ICS932S401
	tristate "Integrated Circuits ICS932S401"
	depends on I2C
	help
	If you say yes here you get support for the Integrated Circuits
	ICS932S401 clock control chips.

	This driver can also be built as a module. If so, the module
	will be called ics932s401.

	config ATMEL_SSC
	tristate "Device driver for Atmel SSC peripheral"
	depends on HAS_IOMEM && (ARCH_AT91 \|\| COMPILE_TEST)
	help
	This option enables device driver support for Atmel Synchronized
	Serial Communication peripheral (SSC).

	The SSC peripheral supports a wide variety of serial frame based
	communications, i.e. I2S, SPI, etc.

	If unsure, say N.

	config ENCLOSURE_SERVICES
	tristate "Enclosure Services"
	help
	Provides support for intelligent enclosures (bays which
	contain storage devices). You also need either a host
	driver (SCSI/ATA) which supports enclosures
	or a SCSI enclosure device (SES) to use these services.

	config SGI_XP
	tristate "Support communication between SGI SSIs"
	depends on NET
	depends on (IA64_SGI_UV \|\| X86_UV) && SMP
	depends on X86_64 \|\| BROKEN
	select SGI_GRU if X86_64 && SMP
	help
	An SGI machine can be divided into multiple Single System
	Images which act independently of each other and have
	hardware based memory protection from the others. Enabling
	this feature will allow for direct communication between SSIs
	based on a network adapter and DMA messaging.

	config CS5535_MFGPT
	tristate "CS5535/CS5536 Geode Multi-Function General Purpose Timer (MFGPT) support"
	depends on MFD_CS5535
	help
	This driver provides access to MFGPT functionality for other
	drivers that need timers. MFGPTs are available in the CS5535 and
	CS5536 companion chips that are found in AMD Geode and several
	other platforms. They have a better resolution and max interval
	than the generic PIT, and are suitable for use as high-res timers.
	You probably don't want to enable this manually; other drivers that
	make use of it should enable it.

	config CS5535_MFGPT_DEFAULT_IRQ
	int
	depends on CS5535_MFGPT
	default 7
	help
	MFGPTs on the CS5535 require an interrupt. The selected IRQ
	can be overridden as a module option as well as by driver that
	use the cs5535_mfgpt_ API; however, different architectures might
	want to use a different IRQ by default. This is here for
	architectures to set as necessary.

	config CS5535_CLOCK_EVENT_SRC
	tristate "CS5535/CS5536 high-res timer (MFGPT) events"
	depends on GENERIC_CLOCKEVENTS && CS5535_MFGPT
	help
	This driver provides a clock event source based on the MFGPT
	timer(s) in the CS5535 and CS5536 companion chips.
	MFGPTs have a better resolution and max interval than the
	generic PIT, and are suitable for use as high-res timers.

	config HP_ILO
	tristate "Channel interface driver for the HP iLO processor"
	depends on PCI
	help
	The channel interface driver allows applications to communicate
	with iLO management processors present on HP ProLiant servers.
	Upon loading, the driver creates /dev/hpilo/dXccbN files, which
	can be used to gather data from the management processor, via
	read and write system calls.

	To compile this driver as a module, choose M here: the
	module will be called hpilo.

	config QCOM_COINCELL
	tristate "Qualcomm coincell charger support"
	depends on MFD_SPMI_PMIC \|\| COMPILE_TEST
	help
	This driver supports the coincell block found inside of
	Qualcomm PMICs. The coincell charger provides a means to
	charge a coincell battery or backup capacitor which is used
	to maintain PMIC register and RTC state in the absence of
	external power.

	config QCOM_FASTRPC
	tristate "Qualcomm FastRPC"
	depends on ARCH_QCOM \|\| COMPILE_TEST
	depends on RPMSG
	select DMA_SHARED_BUFFER
	help
	Provides a communication mechanism that allows for clients to
	make remote method invocations across processor boundary to
	applications DSP processor. Say M if you want to enable this
	module.

	config SGI_GRU
	tristate "SGI GRU driver"
	depends on X86_UV && SMP
	select MMU_NOTIFIER
	help
	The GRU is a hardware resource located in the system chipset. The GRU
	contains memory that can be mmapped into the user address space. This memory is
	used to communicate with the GRU to perform functions such as load/store,
	scatter/gather, bcopy, AMOs, etc. The GRU is directly accessed by user
	instructions using user virtual addresses. GRU instructions (ex., bcopy) use
	user virtual addresses for operands.

	If you are not running on a SGI UV system, say N.

	config SGI_GRU_DEBUG
	bool "SGI GRU driver debug"
	depends on SGI_GRU
	help
	This option enables additional debugging code for the SGI GRU driver.
	If you are unsure, say N.

	config APDS9802ALS
	tristate "Medfield Avago APDS9802 ALS Sensor module"
	depends on I2C
	help
	If you say yes here you get support for the ALS APDS9802 ambient
	light sensor.

	This driver can also be built as a module. If so, the module
	will be called apds9802als.

	config ISL29003
	tristate "Intersil ISL29003 ambient light sensor"
	depends on I2C && SYSFS
	help
	If you say yes here you get support for the Intersil ISL29003
	ambient light sensor.

	This driver can also be built as a module. If so, the module
	will be called isl29003.

	config ISL29020
	tristate "Intersil ISL29020 ambient light sensor"
	depends on I2C
	help
	If you say yes here you get support for the Intersil ISL29020
	ambient light sensor.

	This driver can also be built as a module. If so, the module
	will be called isl29020.

	config SENSORS_TSL2550
	tristate "Taos TSL2550 ambient light sensor"
	depends on I2C && SYSFS
	help
	If you say yes here you get support for the Taos TSL2550
	ambient light sensor.

	This driver can also be built as a module. If so, the module
	will be called tsl2550.

	config SENSORS_BH1770
	tristate "BH1770GLC / SFH7770 combined ALS - Proximity sensor"
	depends on I2C
	help
	Say Y here if you want to build a driver for BH1770GLC (ROHM) or
	SFH7770 (Osram) combined ambient light and proximity sensor chip.

	To compile this driver as a module, choose M here: the
	module will be called bh1770glc. If unsure, say N here.

	config SENSORS_APDS990X
	tristate "APDS990X combined als and proximity sensors"
	depends on I2C
	help
	Say Y here if you want to build a driver for Avago APDS990x
	combined ambient light and proximity sensor chip.

	To compile this driver as a module, choose M here: the
	module will be called apds990x. If unsure, say N here.

	config HMC6352
	tristate "Honeywell HMC6352 compass"
	depends on I2C
	help
	This driver provides support for the Honeywell HMC6352 compass,
	providing configuration and heading data via sysfs.

	config DS1682
	tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm"
	depends on I2C
	help
	If you say yes here you get support for Dallas Semiconductor
	DS1682 Total Elapsed Time Recorder.

	This driver can also be built as a module. If so, the module
	will be called ds1682.

	config VMWARE_BALLOON
	tristate "VMware Balloon Driver"
	depends on VMWARE_VMCI && X86 && HYPERVISOR_GUEST
	select MEMORY_BALLOON
	help
	This is VMware physical memory management driver which acts
	like a "balloon" that can be inflated to reclaim physical pages
	by reserving them in the guest and invalidating them in the
	monitor, freeing up the underlying machine pages so they can
	be allocated to other guests. The balloon can also be deflated
	to allow the guest to use more physical memory.

	If unsure, say N.

	To compile this driver as a module, choose M here: the
	module will be called vmw_balloon.

	config PCH_PHUB
	tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) PHUB"
	select GENERIC_NET_UTILS
	depends on PCI && (X86_32 \|\| MIPS \|\| COMPILE_TEST)
	help
	This driver is for PCH(Platform controller Hub) PHUB(Packet Hub) of
	Intel Topcliff which is an IOH(Input/Output Hub) for x86 embedded
	processor. The Topcliff has MAC address and Option ROM data in SROM.
	This driver can access MAC address and Option ROM data in SROM.

	This driver also can be used for LAPIS Semiconductor's IOH,
	ML7213/ML7223/ML7831.
	ML7213 which is for IVI(In-Vehicle Infotainment) use.
	ML7223 IOH is for MP(Media Phone) use.
	ML7831 IOH is for general purpose use.
	ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
	ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.

	To compile this driver as a module, choose M here: the module will
	be called pch_phub.

	config LATTICE_ECP3_CONFIG
	tristate "Lattice ECP3 FPGA bitstream configuration via SPI"
	depends on SPI && SYSFS
	select FW_LOADER
	default n
	help
	This option enables support for bitstream configuration (programming
	or loading) of the Lattice ECP3 FPGA family via SPI.

	If unsure, say N.

	config SRAM
	bool "Generic on-chip SRAM driver"
	depends on HAS_IOMEM
	select GENERIC_ALLOCATOR
	select SRAM_EXEC if ARM
	help
	This driver allows you to declare a memory region to be managed by
	the genalloc API. It is supposed to be used for small on-chip SRAM
	areas found on many SoCs.

	config SRAM_EXEC
	bool

	config PCI_ENDPOINT_TEST
	depends on PCI
	select CRC32
	tristate "PCI Endpoint Test driver"
	help
	Enable this configuration option to enable the host side test driver
	for PCI Endpoint.

	config XILINX_SDFEC
	tristate "Xilinx SDFEC 16"
	depends on HAS_IOMEM
	help
	This option enables support for the Xilinx SDFEC (Soft Decision
	Forward Error Correction) driver. This enables a char driver
	for the SDFEC.

	You may select this driver if your design instantiates the
	SDFEC(16nm) hardened block. To compile this as a module choose M.

	If unsure, say N.

	config MISC_RTSX
	tristate
	default MISC_RTSX_PCI \|\| MISC_RTSX_USB

	config PVPANIC
	tristate "pvpanic device support"
	depends on HAS_IOMEM && (ACPI \|\| OF)
	help
	This driver provides support for the pvpanic device. pvpanic is
	a paravirtualized device provided by QEMU; it lets a virtual machine
	(guest) communicate panic events to the host.

	config HISI_HIKEY_USB
	tristate "USB GPIO Hub on HiSilicon Hikey 960/970 Platform"
	depends on (OF && GPIOLIB) \|\| COMPILE_TEST
	depends on USB_ROLE_SWITCH
	help
	If you say yes here this adds support for the on-board USB GPIO hub
	found on HiKey 960/970 boards, which is necessary to support
	switching between the dual-role USB-C port and the USB-A host ports
	using only one USB controller.

	source "drivers/misc/c2port/Kconfig"
	source "drivers/misc/eeprom/Kconfig"
	source "drivers/misc/cb710/Kconfig"
	source "drivers/misc/ti-st/Kconfig"
	source "drivers/misc/lis3lv02d/Kconfig"
	source "drivers/misc/altera-stapl/Kconfig"
	source "drivers/misc/mei/Kconfig"
	source "drivers/misc/vmw_vmci/Kconfig"
	source "drivers/misc/genwqe/Kconfig"
	source "drivers/misc/echo/Kconfig"
	source "drivers/misc/cxl/Kconfig"
	source "drivers/misc/ocxl/Kconfig"
	source "drivers/misc/cardreader/Kconfig"
	source "drivers/misc/habanalabs/Kconfig"
	source "drivers/misc/uacce/Kconfig"
	endmenu