|  | // SPDX-License-Identifier: GPL-2.0-or-later | 
|  | /* | 
|  | * Handling of a single switch port | 
|  | * | 
|  | * Copyright (c) 2017 Savoir-faire Linux Inc. | 
|  | *	Vivien Didelot <vivien.didelot@savoirfairelinux.com> | 
|  | */ | 
|  |  | 
|  | #include <linux/if_bridge.h> | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/notifier.h> | 
|  | #include <linux/of_mdio.h> | 
|  | #include <linux/of_net.h> | 
|  |  | 
|  | #include "dsa_priv.h" | 
|  |  | 
|  | /** | 
|  | * dsa_port_notify - Notify the switching fabric of changes to a port | 
|  | * @dp: port on which change occurred | 
|  | * @e: event, must be of type DSA_NOTIFIER_* | 
|  | * @v: event-specific value. | 
|  | * | 
|  | * Notify all switches in the DSA tree that this port's switch belongs to, | 
|  | * including this switch itself, of an event. Allows the other switches to | 
|  | * reconfigure themselves for cross-chip operations. Can also be used to | 
|  | * reconfigure ports without net_devices (CPU ports, DSA links) whenever | 
|  | * a user port's state changes. | 
|  | */ | 
|  | static int dsa_port_notify(const struct dsa_port *dp, unsigned long e, void *v) | 
|  | { | 
|  | return dsa_tree_notify(dp->ds->dst, e, v); | 
|  | } | 
|  |  | 
|  | static void dsa_port_notify_bridge_fdb_flush(const struct dsa_port *dp, u16 vid) | 
|  | { | 
|  | struct net_device *brport_dev = dsa_port_to_bridge_port(dp); | 
|  | struct switchdev_notifier_fdb_info info = { | 
|  | .vid = vid, | 
|  | }; | 
|  |  | 
|  | /* When the port becomes standalone it has already left the bridge. | 
|  | * Don't notify the bridge in that case. | 
|  | */ | 
|  | if (!brport_dev) | 
|  | return; | 
|  |  | 
|  | call_switchdev_notifiers(SWITCHDEV_FDB_FLUSH_TO_BRIDGE, | 
|  | brport_dev, &info.info, NULL); | 
|  | } | 
|  |  | 
|  | static void dsa_port_fast_age(const struct dsa_port *dp) | 
|  | { | 
|  | struct dsa_switch *ds = dp->ds; | 
|  |  | 
|  | if (!ds->ops->port_fast_age) | 
|  | return; | 
|  |  | 
|  | ds->ops->port_fast_age(ds, dp->index); | 
|  |  | 
|  | /* flush all VLANs */ | 
|  | dsa_port_notify_bridge_fdb_flush(dp, 0); | 
|  | } | 
|  |  | 
|  | static int dsa_port_vlan_fast_age(const struct dsa_port *dp, u16 vid) | 
|  | { | 
|  | struct dsa_switch *ds = dp->ds; | 
|  | int err; | 
|  |  | 
|  | if (!ds->ops->port_vlan_fast_age) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | err = ds->ops->port_vlan_fast_age(ds, dp->index, vid); | 
|  |  | 
|  | if (!err) | 
|  | dsa_port_notify_bridge_fdb_flush(dp, vid); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int dsa_port_msti_fast_age(const struct dsa_port *dp, u16 msti) | 
|  | { | 
|  | DECLARE_BITMAP(vids, VLAN_N_VID) = { 0 }; | 
|  | int err, vid; | 
|  |  | 
|  | err = br_mst_get_info(dsa_port_bridge_dev_get(dp), msti, vids); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | for_each_set_bit(vid, vids, VLAN_N_VID) { | 
|  | err = dsa_port_vlan_fast_age(dp, vid); | 
|  | if (err) | 
|  | return err; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static bool dsa_port_can_configure_learning(struct dsa_port *dp) | 
|  | { | 
|  | struct switchdev_brport_flags flags = { | 
|  | .mask = BR_LEARNING, | 
|  | }; | 
|  | struct dsa_switch *ds = dp->ds; | 
|  | int err; | 
|  |  | 
|  | if (!ds->ops->port_bridge_flags || !ds->ops->port_pre_bridge_flags) | 
|  | return false; | 
|  |  | 
|  | err = ds->ops->port_pre_bridge_flags(ds, dp->index, flags, NULL); | 
|  | return !err; | 
|  | } | 
|  |  | 
|  | bool dsa_port_supports_hwtstamp(struct dsa_port *dp, struct ifreq *ifr) | 
|  | { | 
|  | struct dsa_switch *ds = dp->ds; | 
|  | int err; | 
|  |  | 
|  | if (!ds->ops->port_hwtstamp_get || !ds->ops->port_hwtstamp_set) | 
|  | return false; | 
|  |  | 
|  | /* "See through" shim implementations of the "get" method. | 
|  | * This will clobber the ifreq structure, but we will either return an | 
|  | * error, or the master will overwrite it with proper values. | 
|  | */ | 
|  | err = ds->ops->port_hwtstamp_get(ds, dp->index, ifr); | 
|  | return err != -EOPNOTSUPP; | 
|  | } | 
|  |  | 
|  | int dsa_port_set_state(struct dsa_port *dp, u8 state, bool do_fast_age) | 
|  | { | 
|  | struct dsa_switch *ds = dp->ds; | 
|  | int port = dp->index; | 
|  |  | 
|  | if (!ds->ops->port_stp_state_set) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | ds->ops->port_stp_state_set(ds, port, state); | 
|  |  | 
|  | if (!dsa_port_can_configure_learning(dp) || | 
|  | (do_fast_age && dp->learning)) { | 
|  | /* Fast age FDB entries or flush appropriate forwarding database | 
|  | * for the given port, if we are moving it from Learning or | 
|  | * Forwarding state, to Disabled or Blocking or Listening state. | 
|  | * Ports that were standalone before the STP state change don't | 
|  | * need to fast age the FDB, since address learning is off in | 
|  | * standalone mode. | 
|  | */ | 
|  |  | 
|  | if ((dp->stp_state == BR_STATE_LEARNING || | 
|  | dp->stp_state == BR_STATE_FORWARDING) && | 
|  | (state == BR_STATE_DISABLED || | 
|  | state == BR_STATE_BLOCKING || | 
|  | state == BR_STATE_LISTENING)) | 
|  | dsa_port_fast_age(dp); | 
|  | } | 
|  |  | 
|  | dp->stp_state = state; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void dsa_port_set_state_now(struct dsa_port *dp, u8 state, | 
|  | bool do_fast_age) | 
|  | { | 
|  | struct dsa_switch *ds = dp->ds; | 
|  | int err; | 
|  |  | 
|  | err = dsa_port_set_state(dp, state, do_fast_age); | 
|  | if (err && err != -EOPNOTSUPP) { | 
|  | dev_err(ds->dev, "port %d failed to set STP state %u: %pe\n", | 
|  | dp->index, state, ERR_PTR(err)); | 
|  | } | 
|  | } | 
|  |  | 
|  | int dsa_port_set_mst_state(struct dsa_port *dp, | 
|  | const struct switchdev_mst_state *state, | 
|  | struct netlink_ext_ack *extack) | 
|  | { | 
|  | struct dsa_switch *ds = dp->ds; | 
|  | u8 prev_state; | 
|  | int err; | 
|  |  | 
|  | if (!ds->ops->port_mst_state_set) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | err = br_mst_get_state(dsa_port_to_bridge_port(dp), state->msti, | 
|  | &prev_state); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | err = ds->ops->port_mst_state_set(ds, dp->index, state); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | if (!(dp->learning && | 
|  | (prev_state == BR_STATE_LEARNING || | 
|  | prev_state == BR_STATE_FORWARDING) && | 
|  | (state->state == BR_STATE_DISABLED || | 
|  | state->state == BR_STATE_BLOCKING || | 
|  | state->state == BR_STATE_LISTENING))) | 
|  | return 0; | 
|  |  | 
|  | err = dsa_port_msti_fast_age(dp, state->msti); | 
|  | if (err) | 
|  | NL_SET_ERR_MSG_MOD(extack, | 
|  | "Unable to flush associated VLANs"); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int dsa_port_enable_rt(struct dsa_port *dp, struct phy_device *phy) | 
|  | { | 
|  | struct dsa_switch *ds = dp->ds; | 
|  | int port = dp->index; | 
|  | int err; | 
|  |  | 
|  | if (ds->ops->port_enable) { | 
|  | err = ds->ops->port_enable(ds, port, phy); | 
|  | if (err) | 
|  | return err; | 
|  | } | 
|  |  | 
|  | if (!dp->bridge) | 
|  | dsa_port_set_state_now(dp, BR_STATE_FORWARDING, false); | 
|  |  | 
|  | if (dp->pl) | 
|  | phylink_start(dp->pl); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int dsa_port_enable(struct dsa_port *dp, struct phy_device *phy) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | rtnl_lock(); | 
|  | err = dsa_port_enable_rt(dp, phy); | 
|  | rtnl_unlock(); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | void dsa_port_disable_rt(struct dsa_port *dp) | 
|  | { | 
|  | struct dsa_switch *ds = dp->ds; | 
|  | int port = dp->index; | 
|  |  | 
|  | if (dp->pl) | 
|  | phylink_stop(dp->pl); | 
|  |  | 
|  | if (!dp->bridge) | 
|  | dsa_port_set_state_now(dp, BR_STATE_DISABLED, false); | 
|  |  | 
|  | if (ds->ops->port_disable) | 
|  | ds->ops->port_disable(ds, port); | 
|  | } | 
|  |  | 
|  | void dsa_port_disable(struct dsa_port *dp) | 
|  | { | 
|  | rtnl_lock(); | 
|  | dsa_port_disable_rt(dp); | 
|  | rtnl_unlock(); | 
|  | } | 
|  |  | 
|  | static void dsa_port_reset_vlan_filtering(struct dsa_port *dp, | 
|  | struct dsa_bridge bridge) | 
|  | { | 
|  | struct netlink_ext_ack extack = {0}; | 
|  | bool change_vlan_filtering = false; | 
|  | struct dsa_switch *ds = dp->ds; | 
|  | struct dsa_port *other_dp; | 
|  | bool vlan_filtering; | 
|  | int err; | 
|  |  | 
|  | if (ds->needs_standalone_vlan_filtering && | 
|  | !br_vlan_enabled(bridge.dev)) { | 
|  | change_vlan_filtering = true; | 
|  | vlan_filtering = true; | 
|  | } else if (!ds->needs_standalone_vlan_filtering && | 
|  | br_vlan_enabled(bridge.dev)) { | 
|  | change_vlan_filtering = true; | 
|  | vlan_filtering = false; | 
|  | } | 
|  |  | 
|  | /* If the bridge was vlan_filtering, the bridge core doesn't trigger an | 
|  | * event for changing vlan_filtering setting upon slave ports leaving | 
|  | * it. That is a good thing, because that lets us handle it and also | 
|  | * handle the case where the switch's vlan_filtering setting is global | 
|  | * (not per port). When that happens, the correct moment to trigger the | 
|  | * vlan_filtering callback is only when the last port leaves the last | 
|  | * VLAN-aware bridge. | 
|  | */ | 
|  | if (change_vlan_filtering && ds->vlan_filtering_is_global) { | 
|  | dsa_switch_for_each_port(other_dp, ds) { | 
|  | struct net_device *br = dsa_port_bridge_dev_get(other_dp); | 
|  |  | 
|  | if (br && br_vlan_enabled(br)) { | 
|  | change_vlan_filtering = false; | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!change_vlan_filtering) | 
|  | return; | 
|  |  | 
|  | err = dsa_port_vlan_filtering(dp, vlan_filtering, &extack); | 
|  | if (extack._msg) { | 
|  | dev_err(ds->dev, "port %d: %s\n", dp->index, | 
|  | extack._msg); | 
|  | } | 
|  | if (err && err != -EOPNOTSUPP) { | 
|  | dev_err(ds->dev, | 
|  | "port %d failed to reset VLAN filtering to %d: %pe\n", | 
|  | dp->index, vlan_filtering, ERR_PTR(err)); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int dsa_port_inherit_brport_flags(struct dsa_port *dp, | 
|  | struct netlink_ext_ack *extack) | 
|  | { | 
|  | const unsigned long mask = BR_LEARNING | BR_FLOOD | BR_MCAST_FLOOD | | 
|  | BR_BCAST_FLOOD | BR_PORT_LOCKED; | 
|  | struct net_device *brport_dev = dsa_port_to_bridge_port(dp); | 
|  | int flag, err; | 
|  |  | 
|  | for_each_set_bit(flag, &mask, 32) { | 
|  | struct switchdev_brport_flags flags = {0}; | 
|  |  | 
|  | flags.mask = BIT(flag); | 
|  |  | 
|  | if (br_port_flag_is_set(brport_dev, BIT(flag))) | 
|  | flags.val = BIT(flag); | 
|  |  | 
|  | err = dsa_port_bridge_flags(dp, flags, extack); | 
|  | if (err && err != -EOPNOTSUPP) | 
|  | return err; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void dsa_port_clear_brport_flags(struct dsa_port *dp) | 
|  | { | 
|  | const unsigned long val = BR_FLOOD | BR_MCAST_FLOOD | BR_BCAST_FLOOD; | 
|  | const unsigned long mask = BR_LEARNING | BR_FLOOD | BR_MCAST_FLOOD | | 
|  | BR_BCAST_FLOOD | BR_PORT_LOCKED; | 
|  | int flag, err; | 
|  |  | 
|  | for_each_set_bit(flag, &mask, 32) { | 
|  | struct switchdev_brport_flags flags = {0}; | 
|  |  | 
|  | flags.mask = BIT(flag); | 
|  | flags.val = val & BIT(flag); | 
|  |  | 
|  | err = dsa_port_bridge_flags(dp, flags, NULL); | 
|  | if (err && err != -EOPNOTSUPP) | 
|  | dev_err(dp->ds->dev, | 
|  | "failed to clear bridge port flag %lu: %pe\n", | 
|  | flags.val, ERR_PTR(err)); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int dsa_port_switchdev_sync_attrs(struct dsa_port *dp, | 
|  | struct netlink_ext_ack *extack) | 
|  | { | 
|  | struct net_device *brport_dev = dsa_port_to_bridge_port(dp); | 
|  | struct net_device *br = dsa_port_bridge_dev_get(dp); | 
|  | int err; | 
|  |  | 
|  | err = dsa_port_inherit_brport_flags(dp, extack); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | err = dsa_port_set_state(dp, br_port_get_stp_state(brport_dev), false); | 
|  | if (err && err != -EOPNOTSUPP) | 
|  | return err; | 
|  |  | 
|  | err = dsa_port_vlan_filtering(dp, br_vlan_enabled(br), extack); | 
|  | if (err && err != -EOPNOTSUPP) | 
|  | return err; | 
|  |  | 
|  | err = dsa_port_ageing_time(dp, br_get_ageing_time(br)); | 
|  | if (err && err != -EOPNOTSUPP) | 
|  | return err; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void dsa_port_switchdev_unsync_attrs(struct dsa_port *dp, | 
|  | struct dsa_bridge bridge) | 
|  | { | 
|  | /* Configure the port for standalone mode (no address learning, | 
|  | * flood everything). | 
|  | * The bridge only emits SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS events | 
|  | * when the user requests it through netlink or sysfs, but not | 
|  | * automatically at port join or leave, so we need to handle resetting | 
|  | * the brport flags ourselves. But we even prefer it that way, because | 
|  | * otherwise, some setups might never get the notification they need, | 
|  | * for example, when a port leaves a LAG that offloads the bridge, | 
|  | * it becomes standalone, but as far as the bridge is concerned, no | 
|  | * port ever left. | 
|  | */ | 
|  | dsa_port_clear_brport_flags(dp); | 
|  |  | 
|  | /* Port left the bridge, put in BR_STATE_DISABLED by the bridge layer, | 
|  | * so allow it to be in BR_STATE_FORWARDING to be kept functional | 
|  | */ | 
|  | dsa_port_set_state_now(dp, BR_STATE_FORWARDING, true); | 
|  |  | 
|  | dsa_port_reset_vlan_filtering(dp, bridge); | 
|  |  | 
|  | /* Ageing time may be global to the switch chip, so don't change it | 
|  | * here because we have no good reason (or value) to change it to. | 
|  | */ | 
|  | } | 
|  |  | 
|  | static int dsa_port_bridge_create(struct dsa_port *dp, | 
|  | struct net_device *br, | 
|  | struct netlink_ext_ack *extack) | 
|  | { | 
|  | struct dsa_switch *ds = dp->ds; | 
|  | struct dsa_bridge *bridge; | 
|  |  | 
|  | bridge = dsa_tree_bridge_find(ds->dst, br); | 
|  | if (bridge) { | 
|  | refcount_inc(&bridge->refcount); | 
|  | dp->bridge = bridge; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | bridge = kzalloc(sizeof(*bridge), GFP_KERNEL); | 
|  | if (!bridge) | 
|  | return -ENOMEM; | 
|  |  | 
|  | refcount_set(&bridge->refcount, 1); | 
|  |  | 
|  | bridge->dev = br; | 
|  |  | 
|  | bridge->num = dsa_bridge_num_get(br, ds->max_num_bridges); | 
|  | if (ds->max_num_bridges && !bridge->num) { | 
|  | NL_SET_ERR_MSG_MOD(extack, | 
|  | "Range of offloadable bridges exceeded"); | 
|  | kfree(bridge); | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  |  | 
|  | dp->bridge = bridge; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void dsa_port_bridge_destroy(struct dsa_port *dp, | 
|  | const struct net_device *br) | 
|  | { | 
|  | struct dsa_bridge *bridge = dp->bridge; | 
|  |  | 
|  | dp->bridge = NULL; | 
|  |  | 
|  | if (!refcount_dec_and_test(&bridge->refcount)) | 
|  | return; | 
|  |  | 
|  | if (bridge->num) | 
|  | dsa_bridge_num_put(br, bridge->num); | 
|  |  | 
|  | kfree(bridge); | 
|  | } | 
|  |  | 
|  | static bool dsa_port_supports_mst(struct dsa_port *dp) | 
|  | { | 
|  | struct dsa_switch *ds = dp->ds; | 
|  |  | 
|  | return ds->ops->vlan_msti_set && | 
|  | ds->ops->port_mst_state_set && | 
|  | ds->ops->port_vlan_fast_age && | 
|  | dsa_port_can_configure_learning(dp); | 
|  | } | 
|  |  | 
|  | int dsa_port_bridge_join(struct dsa_port *dp, struct net_device *br, | 
|  | struct netlink_ext_ack *extack) | 
|  | { | 
|  | struct dsa_notifier_bridge_info info = { | 
|  | .dp = dp, | 
|  | .extack = extack, | 
|  | }; | 
|  | struct net_device *dev = dp->slave; | 
|  | struct net_device *brport_dev; | 
|  | int err; | 
|  |  | 
|  | if (br_mst_enabled(br) && !dsa_port_supports_mst(dp)) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | /* Here the interface is already bridged. Reflect the current | 
|  | * configuration so that drivers can program their chips accordingly. | 
|  | */ | 
|  | err = dsa_port_bridge_create(dp, br, extack); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | brport_dev = dsa_port_to_bridge_port(dp); | 
|  |  | 
|  | info.bridge = *dp->bridge; | 
|  | err = dsa_broadcast(DSA_NOTIFIER_BRIDGE_JOIN, &info); | 
|  | if (err) | 
|  | goto out_rollback; | 
|  |  | 
|  | /* Drivers which support bridge TX forwarding should set this */ | 
|  | dp->bridge->tx_fwd_offload = info.tx_fwd_offload; | 
|  |  | 
|  | err = switchdev_bridge_port_offload(brport_dev, dev, dp, | 
|  | &dsa_slave_switchdev_notifier, | 
|  | &dsa_slave_switchdev_blocking_notifier, | 
|  | dp->bridge->tx_fwd_offload, extack); | 
|  | if (err) | 
|  | goto out_rollback_unbridge; | 
|  |  | 
|  | err = dsa_port_switchdev_sync_attrs(dp, extack); | 
|  | if (err) | 
|  | goto out_rollback_unoffload; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | out_rollback_unoffload: | 
|  | switchdev_bridge_port_unoffload(brport_dev, dp, | 
|  | &dsa_slave_switchdev_notifier, | 
|  | &dsa_slave_switchdev_blocking_notifier); | 
|  | dsa_flush_workqueue(); | 
|  | out_rollback_unbridge: | 
|  | dsa_broadcast(DSA_NOTIFIER_BRIDGE_LEAVE, &info); | 
|  | out_rollback: | 
|  | dsa_port_bridge_destroy(dp, br); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | void dsa_port_pre_bridge_leave(struct dsa_port *dp, struct net_device *br) | 
|  | { | 
|  | struct net_device *brport_dev = dsa_port_to_bridge_port(dp); | 
|  |  | 
|  | /* Don't try to unoffload something that is not offloaded */ | 
|  | if (!brport_dev) | 
|  | return; | 
|  |  | 
|  | switchdev_bridge_port_unoffload(brport_dev, dp, | 
|  | &dsa_slave_switchdev_notifier, | 
|  | &dsa_slave_switchdev_blocking_notifier); | 
|  |  | 
|  | dsa_flush_workqueue(); | 
|  | } | 
|  |  | 
|  | void dsa_port_bridge_leave(struct dsa_port *dp, struct net_device *br) | 
|  | { | 
|  | struct dsa_notifier_bridge_info info = { | 
|  | .dp = dp, | 
|  | }; | 
|  | int err; | 
|  |  | 
|  | /* If the port could not be offloaded to begin with, then | 
|  | * there is nothing to do. | 
|  | */ | 
|  | if (!dp->bridge) | 
|  | return; | 
|  |  | 
|  | info.bridge = *dp->bridge; | 
|  |  | 
|  | /* Here the port is already unbridged. Reflect the current configuration | 
|  | * so that drivers can program their chips accordingly. | 
|  | */ | 
|  | dsa_port_bridge_destroy(dp, br); | 
|  |  | 
|  | err = dsa_broadcast(DSA_NOTIFIER_BRIDGE_LEAVE, &info); | 
|  | if (err) | 
|  | dev_err(dp->ds->dev, | 
|  | "port %d failed to notify DSA_NOTIFIER_BRIDGE_LEAVE: %pe\n", | 
|  | dp->index, ERR_PTR(err)); | 
|  |  | 
|  | dsa_port_switchdev_unsync_attrs(dp, info.bridge); | 
|  | } | 
|  |  | 
|  | int dsa_port_lag_change(struct dsa_port *dp, | 
|  | struct netdev_lag_lower_state_info *linfo) | 
|  | { | 
|  | struct dsa_notifier_lag_info info = { | 
|  | .dp = dp, | 
|  | }; | 
|  | bool tx_enabled; | 
|  |  | 
|  | if (!dp->lag) | 
|  | return 0; | 
|  |  | 
|  | /* On statically configured aggregates (e.g. loadbalance | 
|  | * without LACP) ports will always be tx_enabled, even if the | 
|  | * link is down. Thus we require both link_up and tx_enabled | 
|  | * in order to include it in the tx set. | 
|  | */ | 
|  | tx_enabled = linfo->link_up && linfo->tx_enabled; | 
|  |  | 
|  | if (tx_enabled == dp->lag_tx_enabled) | 
|  | return 0; | 
|  |  | 
|  | dp->lag_tx_enabled = tx_enabled; | 
|  |  | 
|  | return dsa_port_notify(dp, DSA_NOTIFIER_LAG_CHANGE, &info); | 
|  | } | 
|  |  | 
|  | static int dsa_port_lag_create(struct dsa_port *dp, | 
|  | struct net_device *lag_dev) | 
|  | { | 
|  | struct dsa_switch *ds = dp->ds; | 
|  | struct dsa_lag *lag; | 
|  |  | 
|  | lag = dsa_tree_lag_find(ds->dst, lag_dev); | 
|  | if (lag) { | 
|  | refcount_inc(&lag->refcount); | 
|  | dp->lag = lag; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | lag = kzalloc(sizeof(*lag), GFP_KERNEL); | 
|  | if (!lag) | 
|  | return -ENOMEM; | 
|  |  | 
|  | refcount_set(&lag->refcount, 1); | 
|  | mutex_init(&lag->fdb_lock); | 
|  | INIT_LIST_HEAD(&lag->fdbs); | 
|  | lag->dev = lag_dev; | 
|  | dsa_lag_map(ds->dst, lag); | 
|  | dp->lag = lag; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void dsa_port_lag_destroy(struct dsa_port *dp) | 
|  | { | 
|  | struct dsa_lag *lag = dp->lag; | 
|  |  | 
|  | dp->lag = NULL; | 
|  | dp->lag_tx_enabled = false; | 
|  |  | 
|  | if (!refcount_dec_and_test(&lag->refcount)) | 
|  | return; | 
|  |  | 
|  | WARN_ON(!list_empty(&lag->fdbs)); | 
|  | dsa_lag_unmap(dp->ds->dst, lag); | 
|  | kfree(lag); | 
|  | } | 
|  |  | 
|  | int dsa_port_lag_join(struct dsa_port *dp, struct net_device *lag_dev, | 
|  | struct netdev_lag_upper_info *uinfo, | 
|  | struct netlink_ext_ack *extack) | 
|  | { | 
|  | struct dsa_notifier_lag_info info = { | 
|  | .dp = dp, | 
|  | .info = uinfo, | 
|  | .extack = extack, | 
|  | }; | 
|  | struct net_device *bridge_dev; | 
|  | int err; | 
|  |  | 
|  | err = dsa_port_lag_create(dp, lag_dev); | 
|  | if (err) | 
|  | goto err_lag_create; | 
|  |  | 
|  | info.lag = *dp->lag; | 
|  | err = dsa_port_notify(dp, DSA_NOTIFIER_LAG_JOIN, &info); | 
|  | if (err) | 
|  | goto err_lag_join; | 
|  |  | 
|  | bridge_dev = netdev_master_upper_dev_get(lag_dev); | 
|  | if (!bridge_dev || !netif_is_bridge_master(bridge_dev)) | 
|  | return 0; | 
|  |  | 
|  | err = dsa_port_bridge_join(dp, bridge_dev, extack); | 
|  | if (err) | 
|  | goto err_bridge_join; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_bridge_join: | 
|  | dsa_port_notify(dp, DSA_NOTIFIER_LAG_LEAVE, &info); | 
|  | err_lag_join: | 
|  | dsa_port_lag_destroy(dp); | 
|  | err_lag_create: | 
|  | return err; | 
|  | } | 
|  |  | 
|  | void dsa_port_pre_lag_leave(struct dsa_port *dp, struct net_device *lag_dev) | 
|  | { | 
|  | struct net_device *br = dsa_port_bridge_dev_get(dp); | 
|  |  | 
|  | if (br) | 
|  | dsa_port_pre_bridge_leave(dp, br); | 
|  | } | 
|  |  | 
|  | void dsa_port_lag_leave(struct dsa_port *dp, struct net_device *lag_dev) | 
|  | { | 
|  | struct net_device *br = dsa_port_bridge_dev_get(dp); | 
|  | struct dsa_notifier_lag_info info = { | 
|  | .dp = dp, | 
|  | }; | 
|  | int err; | 
|  |  | 
|  | if (!dp->lag) | 
|  | return; | 
|  |  | 
|  | /* Port might have been part of a LAG that in turn was | 
|  | * attached to a bridge. | 
|  | */ | 
|  | if (br) | 
|  | dsa_port_bridge_leave(dp, br); | 
|  |  | 
|  | info.lag = *dp->lag; | 
|  |  | 
|  | dsa_port_lag_destroy(dp); | 
|  |  | 
|  | err = dsa_port_notify(dp, DSA_NOTIFIER_LAG_LEAVE, &info); | 
|  | if (err) | 
|  | dev_err(dp->ds->dev, | 
|  | "port %d failed to notify DSA_NOTIFIER_LAG_LEAVE: %pe\n", | 
|  | dp->index, ERR_PTR(err)); | 
|  | } | 
|  |  | 
|  | /* Must be called under rcu_read_lock() */ | 
|  | static bool dsa_port_can_apply_vlan_filtering(struct dsa_port *dp, | 
|  | bool vlan_filtering, | 
|  | struct netlink_ext_ack *extack) | 
|  | { | 
|  | struct dsa_switch *ds = dp->ds; | 
|  | struct dsa_port *other_dp; | 
|  | int err; | 
|  |  | 
|  | /* VLAN awareness was off, so the question is "can we turn it on". | 
|  | * We may have had 8021q uppers, those need to go. Make sure we don't | 
|  | * enter an inconsistent state: deny changing the VLAN awareness state | 
|  | * as long as we have 8021q uppers. | 
|  | */ | 
|  | if (vlan_filtering && dsa_port_is_user(dp)) { | 
|  | struct net_device *br = dsa_port_bridge_dev_get(dp); | 
|  | struct net_device *upper_dev, *slave = dp->slave; | 
|  | struct list_head *iter; | 
|  |  | 
|  | netdev_for_each_upper_dev_rcu(slave, upper_dev, iter) { | 
|  | struct bridge_vlan_info br_info; | 
|  | u16 vid; | 
|  |  | 
|  | if (!is_vlan_dev(upper_dev)) | 
|  | continue; | 
|  |  | 
|  | vid = vlan_dev_vlan_id(upper_dev); | 
|  |  | 
|  | /* br_vlan_get_info() returns -EINVAL or -ENOENT if the | 
|  | * device, respectively the VID is not found, returning | 
|  | * 0 means success, which is a failure for us here. | 
|  | */ | 
|  | err = br_vlan_get_info(br, vid, &br_info); | 
|  | if (err == 0) { | 
|  | NL_SET_ERR_MSG_MOD(extack, | 
|  | "Must first remove VLAN uppers having VIDs also present in bridge"); | 
|  | return false; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!ds->vlan_filtering_is_global) | 
|  | return true; | 
|  |  | 
|  | /* For cases where enabling/disabling VLAN awareness is global to the | 
|  | * switch, we need to handle the case where multiple bridges span | 
|  | * different ports of the same switch device and one of them has a | 
|  | * different setting than what is being requested. | 
|  | */ | 
|  | dsa_switch_for_each_port(other_dp, ds) { | 
|  | struct net_device *other_br = dsa_port_bridge_dev_get(other_dp); | 
|  |  | 
|  | /* If it's the same bridge, it also has same | 
|  | * vlan_filtering setting => no need to check | 
|  | */ | 
|  | if (!other_br || other_br == dsa_port_bridge_dev_get(dp)) | 
|  | continue; | 
|  |  | 
|  | if (br_vlan_enabled(other_br) != vlan_filtering) { | 
|  | NL_SET_ERR_MSG_MOD(extack, | 
|  | "VLAN filtering is a global setting"); | 
|  | return false; | 
|  | } | 
|  | } | 
|  | return true; | 
|  | } | 
|  |  | 
|  | int dsa_port_vlan_filtering(struct dsa_port *dp, bool vlan_filtering, | 
|  | struct netlink_ext_ack *extack) | 
|  | { | 
|  | bool old_vlan_filtering = dsa_port_is_vlan_filtering(dp); | 
|  | struct dsa_switch *ds = dp->ds; | 
|  | bool apply; | 
|  | int err; | 
|  |  | 
|  | if (!ds->ops->port_vlan_filtering) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | /* We are called from dsa_slave_switchdev_blocking_event(), | 
|  | * which is not under rcu_read_lock(), unlike | 
|  | * dsa_slave_switchdev_event(). | 
|  | */ | 
|  | rcu_read_lock(); | 
|  | apply = dsa_port_can_apply_vlan_filtering(dp, vlan_filtering, extack); | 
|  | rcu_read_unlock(); | 
|  | if (!apply) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (dsa_port_is_vlan_filtering(dp) == vlan_filtering) | 
|  | return 0; | 
|  |  | 
|  | err = ds->ops->port_vlan_filtering(ds, dp->index, vlan_filtering, | 
|  | extack); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | if (ds->vlan_filtering_is_global) { | 
|  | struct dsa_port *other_dp; | 
|  |  | 
|  | ds->vlan_filtering = vlan_filtering; | 
|  |  | 
|  | dsa_switch_for_each_user_port(other_dp, ds) { | 
|  | struct net_device *slave = other_dp->slave; | 
|  |  | 
|  | /* We might be called in the unbind path, so not | 
|  | * all slave devices might still be registered. | 
|  | */ | 
|  | if (!slave) | 
|  | continue; | 
|  |  | 
|  | err = dsa_slave_manage_vlan_filtering(slave, | 
|  | vlan_filtering); | 
|  | if (err) | 
|  | goto restore; | 
|  | } | 
|  | } else { | 
|  | dp->vlan_filtering = vlan_filtering; | 
|  |  | 
|  | err = dsa_slave_manage_vlan_filtering(dp->slave, | 
|  | vlan_filtering); | 
|  | if (err) | 
|  | goto restore; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | restore: | 
|  | ds->ops->port_vlan_filtering(ds, dp->index, old_vlan_filtering, NULL); | 
|  |  | 
|  | if (ds->vlan_filtering_is_global) | 
|  | ds->vlan_filtering = old_vlan_filtering; | 
|  | else | 
|  | dp->vlan_filtering = old_vlan_filtering; | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /* This enforces legacy behavior for switch drivers which assume they can't | 
|  | * receive VLAN configuration when enslaved to a bridge with vlan_filtering=0 | 
|  | */ | 
|  | bool dsa_port_skip_vlan_configuration(struct dsa_port *dp) | 
|  | { | 
|  | struct net_device *br = dsa_port_bridge_dev_get(dp); | 
|  | struct dsa_switch *ds = dp->ds; | 
|  |  | 
|  | if (!br) | 
|  | return false; | 
|  |  | 
|  | return !ds->configure_vlan_while_not_filtering && !br_vlan_enabled(br); | 
|  | } | 
|  |  | 
|  | int dsa_port_ageing_time(struct dsa_port *dp, clock_t ageing_clock) | 
|  | { | 
|  | unsigned long ageing_jiffies = clock_t_to_jiffies(ageing_clock); | 
|  | unsigned int ageing_time = jiffies_to_msecs(ageing_jiffies); | 
|  | struct dsa_notifier_ageing_time_info info; | 
|  | int err; | 
|  |  | 
|  | info.ageing_time = ageing_time; | 
|  |  | 
|  | err = dsa_port_notify(dp, DSA_NOTIFIER_AGEING_TIME, &info); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | dp->ageing_time = ageing_time; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int dsa_port_mst_enable(struct dsa_port *dp, bool on, | 
|  | struct netlink_ext_ack *extack) | 
|  | { | 
|  | if (on && !dsa_port_supports_mst(dp)) { | 
|  | NL_SET_ERR_MSG_MOD(extack, "Hardware does not support MST"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int dsa_port_pre_bridge_flags(const struct dsa_port *dp, | 
|  | struct switchdev_brport_flags flags, | 
|  | struct netlink_ext_ack *extack) | 
|  | { | 
|  | struct dsa_switch *ds = dp->ds; | 
|  |  | 
|  | if (!ds->ops->port_pre_bridge_flags) | 
|  | return -EINVAL; | 
|  |  | 
|  | return ds->ops->port_pre_bridge_flags(ds, dp->index, flags, extack); | 
|  | } | 
|  |  | 
|  | int dsa_port_bridge_flags(struct dsa_port *dp, | 
|  | struct switchdev_brport_flags flags, | 
|  | struct netlink_ext_ack *extack) | 
|  | { | 
|  | struct dsa_switch *ds = dp->ds; | 
|  | int err; | 
|  |  | 
|  | if (!ds->ops->port_bridge_flags) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | err = ds->ops->port_bridge_flags(ds, dp->index, flags, extack); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | if (flags.mask & BR_LEARNING) { | 
|  | bool learning = flags.val & BR_LEARNING; | 
|  |  | 
|  | if (learning == dp->learning) | 
|  | return 0; | 
|  |  | 
|  | if ((dp->learning && !learning) && | 
|  | (dp->stp_state == BR_STATE_LEARNING || | 
|  | dp->stp_state == BR_STATE_FORWARDING)) | 
|  | dsa_port_fast_age(dp); | 
|  |  | 
|  | dp->learning = learning; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void dsa_port_set_host_flood(struct dsa_port *dp, bool uc, bool mc) | 
|  | { | 
|  | struct dsa_switch *ds = dp->ds; | 
|  |  | 
|  | if (ds->ops->port_set_host_flood) | 
|  | ds->ops->port_set_host_flood(ds, dp->index, uc, mc); | 
|  | } | 
|  |  | 
|  | int dsa_port_vlan_msti(struct dsa_port *dp, | 
|  | const struct switchdev_vlan_msti *msti) | 
|  | { | 
|  | struct dsa_switch *ds = dp->ds; | 
|  |  | 
|  | if (!ds->ops->vlan_msti_set) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | return ds->ops->vlan_msti_set(ds, *dp->bridge, msti); | 
|  | } | 
|  |  | 
|  | int dsa_port_mtu_change(struct dsa_port *dp, int new_mtu) | 
|  | { | 
|  | struct dsa_notifier_mtu_info info = { | 
|  | .dp = dp, | 
|  | .mtu = new_mtu, | 
|  | }; | 
|  |  | 
|  | return dsa_port_notify(dp, DSA_NOTIFIER_MTU, &info); | 
|  | } | 
|  |  | 
|  | int dsa_port_fdb_add(struct dsa_port *dp, const unsigned char *addr, | 
|  | u16 vid) | 
|  | { | 
|  | struct dsa_notifier_fdb_info info = { | 
|  | .dp = dp, | 
|  | .addr = addr, | 
|  | .vid = vid, | 
|  | .db = { | 
|  | .type = DSA_DB_BRIDGE, | 
|  | .bridge = *dp->bridge, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | /* Refcounting takes bridge.num as a key, and should be global for all | 
|  | * bridges in the absence of FDB isolation, and per bridge otherwise. | 
|  | * Force the bridge.num to zero here in the absence of FDB isolation. | 
|  | */ | 
|  | if (!dp->ds->fdb_isolation) | 
|  | info.db.bridge.num = 0; | 
|  |  | 
|  | return dsa_port_notify(dp, DSA_NOTIFIER_FDB_ADD, &info); | 
|  | } | 
|  |  | 
|  | int dsa_port_fdb_del(struct dsa_port *dp, const unsigned char *addr, | 
|  | u16 vid) | 
|  | { | 
|  | struct dsa_notifier_fdb_info info = { | 
|  | .dp = dp, | 
|  | .addr = addr, | 
|  | .vid = vid, | 
|  | .db = { | 
|  | .type = DSA_DB_BRIDGE, | 
|  | .bridge = *dp->bridge, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | if (!dp->ds->fdb_isolation) | 
|  | info.db.bridge.num = 0; | 
|  |  | 
|  | return dsa_port_notify(dp, DSA_NOTIFIER_FDB_DEL, &info); | 
|  | } | 
|  |  | 
|  | static int dsa_port_host_fdb_add(struct dsa_port *dp, | 
|  | const unsigned char *addr, u16 vid, | 
|  | struct dsa_db db) | 
|  | { | 
|  | struct dsa_notifier_fdb_info info = { | 
|  | .dp = dp, | 
|  | .addr = addr, | 
|  | .vid = vid, | 
|  | .db = db, | 
|  | }; | 
|  |  | 
|  | if (!dp->ds->fdb_isolation) | 
|  | info.db.bridge.num = 0; | 
|  |  | 
|  | return dsa_port_notify(dp, DSA_NOTIFIER_HOST_FDB_ADD, &info); | 
|  | } | 
|  |  | 
|  | int dsa_port_standalone_host_fdb_add(struct dsa_port *dp, | 
|  | const unsigned char *addr, u16 vid) | 
|  | { | 
|  | struct dsa_db db = { | 
|  | .type = DSA_DB_PORT, | 
|  | .dp = dp, | 
|  | }; | 
|  |  | 
|  | return dsa_port_host_fdb_add(dp, addr, vid, db); | 
|  | } | 
|  |  | 
|  | int dsa_port_bridge_host_fdb_add(struct dsa_port *dp, | 
|  | const unsigned char *addr, u16 vid) | 
|  | { | 
|  | struct net_device *master = dsa_port_to_master(dp); | 
|  | struct dsa_db db = { | 
|  | .type = DSA_DB_BRIDGE, | 
|  | .bridge = *dp->bridge, | 
|  | }; | 
|  | int err; | 
|  |  | 
|  | /* Avoid a call to __dev_set_promiscuity() on the master, which | 
|  | * requires rtnl_lock(), since we can't guarantee that is held here, | 
|  | * and we can't take it either. | 
|  | */ | 
|  | if (master->priv_flags & IFF_UNICAST_FLT) { | 
|  | err = dev_uc_add(master, addr); | 
|  | if (err) | 
|  | return err; | 
|  | } | 
|  |  | 
|  | return dsa_port_host_fdb_add(dp, addr, vid, db); | 
|  | } | 
|  |  | 
|  | static int dsa_port_host_fdb_del(struct dsa_port *dp, | 
|  | const unsigned char *addr, u16 vid, | 
|  | struct dsa_db db) | 
|  | { | 
|  | struct dsa_notifier_fdb_info info = { | 
|  | .dp = dp, | 
|  | .addr = addr, | 
|  | .vid = vid, | 
|  | .db = db, | 
|  | }; | 
|  |  | 
|  | if (!dp->ds->fdb_isolation) | 
|  | info.db.bridge.num = 0; | 
|  |  | 
|  | return dsa_port_notify(dp, DSA_NOTIFIER_HOST_FDB_DEL, &info); | 
|  | } | 
|  |  | 
|  | int dsa_port_standalone_host_fdb_del(struct dsa_port *dp, | 
|  | const unsigned char *addr, u16 vid) | 
|  | { | 
|  | struct dsa_db db = { | 
|  | .type = DSA_DB_PORT, | 
|  | .dp = dp, | 
|  | }; | 
|  |  | 
|  | return dsa_port_host_fdb_del(dp, addr, vid, db); | 
|  | } | 
|  |  | 
|  | int dsa_port_bridge_host_fdb_del(struct dsa_port *dp, | 
|  | const unsigned char *addr, u16 vid) | 
|  | { | 
|  | struct net_device *master = dsa_port_to_master(dp); | 
|  | struct dsa_db db = { | 
|  | .type = DSA_DB_BRIDGE, | 
|  | .bridge = *dp->bridge, | 
|  | }; | 
|  | int err; | 
|  |  | 
|  | if (master->priv_flags & IFF_UNICAST_FLT) { | 
|  | err = dev_uc_del(master, addr); | 
|  | if (err) | 
|  | return err; | 
|  | } | 
|  |  | 
|  | return dsa_port_host_fdb_del(dp, addr, vid, db); | 
|  | } | 
|  |  | 
|  | int dsa_port_lag_fdb_add(struct dsa_port *dp, const unsigned char *addr, | 
|  | u16 vid) | 
|  | { | 
|  | struct dsa_notifier_lag_fdb_info info = { | 
|  | .lag = dp->lag, | 
|  | .addr = addr, | 
|  | .vid = vid, | 
|  | .db = { | 
|  | .type = DSA_DB_BRIDGE, | 
|  | .bridge = *dp->bridge, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | if (!dp->ds->fdb_isolation) | 
|  | info.db.bridge.num = 0; | 
|  |  | 
|  | return dsa_port_notify(dp, DSA_NOTIFIER_LAG_FDB_ADD, &info); | 
|  | } | 
|  |  | 
|  | int dsa_port_lag_fdb_del(struct dsa_port *dp, const unsigned char *addr, | 
|  | u16 vid) | 
|  | { | 
|  | struct dsa_notifier_lag_fdb_info info = { | 
|  | .lag = dp->lag, | 
|  | .addr = addr, | 
|  | .vid = vid, | 
|  | .db = { | 
|  | .type = DSA_DB_BRIDGE, | 
|  | .bridge = *dp->bridge, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | if (!dp->ds->fdb_isolation) | 
|  | info.db.bridge.num = 0; | 
|  |  | 
|  | return dsa_port_notify(dp, DSA_NOTIFIER_LAG_FDB_DEL, &info); | 
|  | } | 
|  |  | 
|  | int dsa_port_fdb_dump(struct dsa_port *dp, dsa_fdb_dump_cb_t *cb, void *data) | 
|  | { | 
|  | struct dsa_switch *ds = dp->ds; | 
|  | int port = dp->index; | 
|  |  | 
|  | if (!ds->ops->port_fdb_dump) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | return ds->ops->port_fdb_dump(ds, port, cb, data); | 
|  | } | 
|  |  | 
|  | int dsa_port_mdb_add(const struct dsa_port *dp, | 
|  | const struct switchdev_obj_port_mdb *mdb) | 
|  | { | 
|  | struct dsa_notifier_mdb_info info = { | 
|  | .dp = dp, | 
|  | .mdb = mdb, | 
|  | .db = { | 
|  | .type = DSA_DB_BRIDGE, | 
|  | .bridge = *dp->bridge, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | if (!dp->ds->fdb_isolation) | 
|  | info.db.bridge.num = 0; | 
|  |  | 
|  | return dsa_port_notify(dp, DSA_NOTIFIER_MDB_ADD, &info); | 
|  | } | 
|  |  | 
|  | int dsa_port_mdb_del(const struct dsa_port *dp, | 
|  | const struct switchdev_obj_port_mdb *mdb) | 
|  | { | 
|  | struct dsa_notifier_mdb_info info = { | 
|  | .dp = dp, | 
|  | .mdb = mdb, | 
|  | .db = { | 
|  | .type = DSA_DB_BRIDGE, | 
|  | .bridge = *dp->bridge, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | if (!dp->ds->fdb_isolation) | 
|  | info.db.bridge.num = 0; | 
|  |  | 
|  | return dsa_port_notify(dp, DSA_NOTIFIER_MDB_DEL, &info); | 
|  | } | 
|  |  | 
|  | static int dsa_port_host_mdb_add(const struct dsa_port *dp, | 
|  | const struct switchdev_obj_port_mdb *mdb, | 
|  | struct dsa_db db) | 
|  | { | 
|  | struct dsa_notifier_mdb_info info = { | 
|  | .dp = dp, | 
|  | .mdb = mdb, | 
|  | .db = db, | 
|  | }; | 
|  |  | 
|  | if (!dp->ds->fdb_isolation) | 
|  | info.db.bridge.num = 0; | 
|  |  | 
|  | return dsa_port_notify(dp, DSA_NOTIFIER_HOST_MDB_ADD, &info); | 
|  | } | 
|  |  | 
|  | int dsa_port_standalone_host_mdb_add(const struct dsa_port *dp, | 
|  | const struct switchdev_obj_port_mdb *mdb) | 
|  | { | 
|  | struct dsa_db db = { | 
|  | .type = DSA_DB_PORT, | 
|  | .dp = dp, | 
|  | }; | 
|  |  | 
|  | return dsa_port_host_mdb_add(dp, mdb, db); | 
|  | } | 
|  |  | 
|  | int dsa_port_bridge_host_mdb_add(const struct dsa_port *dp, | 
|  | const struct switchdev_obj_port_mdb *mdb) | 
|  | { | 
|  | struct net_device *master = dsa_port_to_master(dp); | 
|  | struct dsa_db db = { | 
|  | .type = DSA_DB_BRIDGE, | 
|  | .bridge = *dp->bridge, | 
|  | }; | 
|  | int err; | 
|  |  | 
|  | err = dev_mc_add(master, mdb->addr); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | return dsa_port_host_mdb_add(dp, mdb, db); | 
|  | } | 
|  |  | 
|  | static int dsa_port_host_mdb_del(const struct dsa_port *dp, | 
|  | const struct switchdev_obj_port_mdb *mdb, | 
|  | struct dsa_db db) | 
|  | { | 
|  | struct dsa_notifier_mdb_info info = { | 
|  | .dp = dp, | 
|  | .mdb = mdb, | 
|  | .db = db, | 
|  | }; | 
|  |  | 
|  | if (!dp->ds->fdb_isolation) | 
|  | info.db.bridge.num = 0; | 
|  |  | 
|  | return dsa_port_notify(dp, DSA_NOTIFIER_HOST_MDB_DEL, &info); | 
|  | } | 
|  |  | 
|  | int dsa_port_standalone_host_mdb_del(const struct dsa_port *dp, | 
|  | const struct switchdev_obj_port_mdb *mdb) | 
|  | { | 
|  | struct dsa_db db = { | 
|  | .type = DSA_DB_PORT, | 
|  | .dp = dp, | 
|  | }; | 
|  |  | 
|  | return dsa_port_host_mdb_del(dp, mdb, db); | 
|  | } | 
|  |  | 
|  | int dsa_port_bridge_host_mdb_del(const struct dsa_port *dp, | 
|  | const struct switchdev_obj_port_mdb *mdb) | 
|  | { | 
|  | struct net_device *master = dsa_port_to_master(dp); | 
|  | struct dsa_db db = { | 
|  | .type = DSA_DB_BRIDGE, | 
|  | .bridge = *dp->bridge, | 
|  | }; | 
|  | int err; | 
|  |  | 
|  | err = dev_mc_del(master, mdb->addr); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | return dsa_port_host_mdb_del(dp, mdb, db); | 
|  | } | 
|  |  | 
|  | int dsa_port_vlan_add(struct dsa_port *dp, | 
|  | const struct switchdev_obj_port_vlan *vlan, | 
|  | struct netlink_ext_ack *extack) | 
|  | { | 
|  | struct dsa_notifier_vlan_info info = { | 
|  | .dp = dp, | 
|  | .vlan = vlan, | 
|  | .extack = extack, | 
|  | }; | 
|  |  | 
|  | return dsa_port_notify(dp, DSA_NOTIFIER_VLAN_ADD, &info); | 
|  | } | 
|  |  | 
|  | int dsa_port_vlan_del(struct dsa_port *dp, | 
|  | const struct switchdev_obj_port_vlan *vlan) | 
|  | { | 
|  | struct dsa_notifier_vlan_info info = { | 
|  | .dp = dp, | 
|  | .vlan = vlan, | 
|  | }; | 
|  |  | 
|  | return dsa_port_notify(dp, DSA_NOTIFIER_VLAN_DEL, &info); | 
|  | } | 
|  |  | 
|  | int dsa_port_host_vlan_add(struct dsa_port *dp, | 
|  | const struct switchdev_obj_port_vlan *vlan, | 
|  | struct netlink_ext_ack *extack) | 
|  | { | 
|  | struct net_device *master = dsa_port_to_master(dp); | 
|  | struct dsa_notifier_vlan_info info = { | 
|  | .dp = dp, | 
|  | .vlan = vlan, | 
|  | .extack = extack, | 
|  | }; | 
|  | int err; | 
|  |  | 
|  | err = dsa_port_notify(dp, DSA_NOTIFIER_HOST_VLAN_ADD, &info); | 
|  | if (err && err != -EOPNOTSUPP) | 
|  | return err; | 
|  |  | 
|  | vlan_vid_add(master, htons(ETH_P_8021Q), vlan->vid); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | int dsa_port_host_vlan_del(struct dsa_port *dp, | 
|  | const struct switchdev_obj_port_vlan *vlan) | 
|  | { | 
|  | struct net_device *master = dsa_port_to_master(dp); | 
|  | struct dsa_notifier_vlan_info info = { | 
|  | .dp = dp, | 
|  | .vlan = vlan, | 
|  | }; | 
|  | int err; | 
|  |  | 
|  | err = dsa_port_notify(dp, DSA_NOTIFIER_HOST_VLAN_DEL, &info); | 
|  | if (err && err != -EOPNOTSUPP) | 
|  | return err; | 
|  |  | 
|  | vlan_vid_del(master, htons(ETH_P_8021Q), vlan->vid); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | int dsa_port_mrp_add(const struct dsa_port *dp, | 
|  | const struct switchdev_obj_mrp *mrp) | 
|  | { | 
|  | struct dsa_switch *ds = dp->ds; | 
|  |  | 
|  | if (!ds->ops->port_mrp_add) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | return ds->ops->port_mrp_add(ds, dp->index, mrp); | 
|  | } | 
|  |  | 
|  | int dsa_port_mrp_del(const struct dsa_port *dp, | 
|  | const struct switchdev_obj_mrp *mrp) | 
|  | { | 
|  | struct dsa_switch *ds = dp->ds; | 
|  |  | 
|  | if (!ds->ops->port_mrp_del) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | return ds->ops->port_mrp_del(ds, dp->index, mrp); | 
|  | } | 
|  |  | 
|  | int dsa_port_mrp_add_ring_role(const struct dsa_port *dp, | 
|  | const struct switchdev_obj_ring_role_mrp *mrp) | 
|  | { | 
|  | struct dsa_switch *ds = dp->ds; | 
|  |  | 
|  | if (!ds->ops->port_mrp_add_ring_role) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | return ds->ops->port_mrp_add_ring_role(ds, dp->index, mrp); | 
|  | } | 
|  |  | 
|  | int dsa_port_mrp_del_ring_role(const struct dsa_port *dp, | 
|  | const struct switchdev_obj_ring_role_mrp *mrp) | 
|  | { | 
|  | struct dsa_switch *ds = dp->ds; | 
|  |  | 
|  | if (!ds->ops->port_mrp_del_ring_role) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | return ds->ops->port_mrp_del_ring_role(ds, dp->index, mrp); | 
|  | } | 
|  |  | 
|  | static int dsa_port_assign_master(struct dsa_port *dp, | 
|  | struct net_device *master, | 
|  | struct netlink_ext_ack *extack, | 
|  | bool fail_on_err) | 
|  | { | 
|  | struct dsa_switch *ds = dp->ds; | 
|  | int port = dp->index, err; | 
|  |  | 
|  | err = ds->ops->port_change_master(ds, port, master, extack); | 
|  | if (err && !fail_on_err) | 
|  | dev_err(ds->dev, "port %d failed to assign master %s: %pe\n", | 
|  | port, master->name, ERR_PTR(err)); | 
|  |  | 
|  | if (err && fail_on_err) | 
|  | return err; | 
|  |  | 
|  | dp->cpu_dp = master->dsa_ptr; | 
|  | dp->cpu_port_in_lag = netif_is_lag_master(master); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Change the dp->cpu_dp affinity for a user port. Note that both cross-chip | 
|  | * notifiers and drivers have implicit assumptions about user-to-CPU-port | 
|  | * mappings, so we unfortunately cannot delay the deletion of the objects | 
|  | * (switchdev, standalone addresses, standalone VLANs) on the old CPU port | 
|  | * until the new CPU port has been set up. So we need to completely tear down | 
|  | * the old CPU port before changing it, and restore it on errors during the | 
|  | * bringup of the new one. | 
|  | */ | 
|  | int dsa_port_change_master(struct dsa_port *dp, struct net_device *master, | 
|  | struct netlink_ext_ack *extack) | 
|  | { | 
|  | struct net_device *bridge_dev = dsa_port_bridge_dev_get(dp); | 
|  | struct net_device *old_master = dsa_port_to_master(dp); | 
|  | struct net_device *dev = dp->slave; | 
|  | struct dsa_switch *ds = dp->ds; | 
|  | bool vlan_filtering; | 
|  | int err, tmp; | 
|  |  | 
|  | /* Bridges may hold host FDB, MDB and VLAN objects. These need to be | 
|  | * migrated, so dynamically unoffload and later reoffload the bridge | 
|  | * port. | 
|  | */ | 
|  | if (bridge_dev) { | 
|  | dsa_port_pre_bridge_leave(dp, bridge_dev); | 
|  | dsa_port_bridge_leave(dp, bridge_dev); | 
|  | } | 
|  |  | 
|  | /* The port might still be VLAN filtering even if it's no longer | 
|  | * under a bridge, either due to ds->vlan_filtering_is_global or | 
|  | * ds->needs_standalone_vlan_filtering. In turn this means VLANs | 
|  | * on the CPU port. | 
|  | */ | 
|  | vlan_filtering = dsa_port_is_vlan_filtering(dp); | 
|  | if (vlan_filtering) { | 
|  | err = dsa_slave_manage_vlan_filtering(dev, false); | 
|  | if (err) { | 
|  | NL_SET_ERR_MSG_MOD(extack, | 
|  | "Failed to remove standalone VLANs"); | 
|  | goto rewind_old_bridge; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Standalone addresses, and addresses of upper interfaces like | 
|  | * VLAN, LAG, HSR need to be migrated. | 
|  | */ | 
|  | dsa_slave_unsync_ha(dev); | 
|  |  | 
|  | err = dsa_port_assign_master(dp, master, extack, true); | 
|  | if (err) | 
|  | goto rewind_old_addrs; | 
|  |  | 
|  | dsa_slave_sync_ha(dev); | 
|  |  | 
|  | if (vlan_filtering) { | 
|  | err = dsa_slave_manage_vlan_filtering(dev, true); | 
|  | if (err) { | 
|  | NL_SET_ERR_MSG_MOD(extack, | 
|  | "Failed to restore standalone VLANs"); | 
|  | goto rewind_new_addrs; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (bridge_dev) { | 
|  | err = dsa_port_bridge_join(dp, bridge_dev, extack); | 
|  | if (err && err == -EOPNOTSUPP) { | 
|  | NL_SET_ERR_MSG_MOD(extack, | 
|  | "Failed to reoffload bridge"); | 
|  | goto rewind_new_vlan; | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | rewind_new_vlan: | 
|  | if (vlan_filtering) | 
|  | dsa_slave_manage_vlan_filtering(dev, false); | 
|  |  | 
|  | rewind_new_addrs: | 
|  | dsa_slave_unsync_ha(dev); | 
|  |  | 
|  | dsa_port_assign_master(dp, old_master, NULL, false); | 
|  |  | 
|  | /* Restore the objects on the old CPU port */ | 
|  | rewind_old_addrs: | 
|  | dsa_slave_sync_ha(dev); | 
|  |  | 
|  | if (vlan_filtering) { | 
|  | tmp = dsa_slave_manage_vlan_filtering(dev, true); | 
|  | if (tmp) { | 
|  | dev_err(ds->dev, | 
|  | "port %d failed to restore standalone VLANs: %pe\n", | 
|  | dp->index, ERR_PTR(tmp)); | 
|  | } | 
|  | } | 
|  |  | 
|  | rewind_old_bridge: | 
|  | if (bridge_dev) { | 
|  | tmp = dsa_port_bridge_join(dp, bridge_dev, extack); | 
|  | if (tmp) { | 
|  | dev_err(ds->dev, | 
|  | "port %d failed to rejoin bridge %s: %pe\n", | 
|  | dp->index, bridge_dev->name, ERR_PTR(tmp)); | 
|  | } | 
|  | } | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | void dsa_port_set_tag_protocol(struct dsa_port *cpu_dp, | 
|  | const struct dsa_device_ops *tag_ops) | 
|  | { | 
|  | cpu_dp->rcv = tag_ops->rcv; | 
|  | cpu_dp->tag_ops = tag_ops; | 
|  | } | 
|  |  | 
|  | static struct phy_device *dsa_port_get_phy_device(struct dsa_port *dp) | 
|  | { | 
|  | struct device_node *phy_dn; | 
|  | struct phy_device *phydev; | 
|  |  | 
|  | phy_dn = of_parse_phandle(dp->dn, "phy-handle", 0); | 
|  | if (!phy_dn) | 
|  | return NULL; | 
|  |  | 
|  | phydev = of_phy_find_device(phy_dn); | 
|  | if (!phydev) { | 
|  | of_node_put(phy_dn); | 
|  | return ERR_PTR(-EPROBE_DEFER); | 
|  | } | 
|  |  | 
|  | of_node_put(phy_dn); | 
|  | return phydev; | 
|  | } | 
|  |  | 
|  | static void dsa_port_phylink_validate(struct phylink_config *config, | 
|  | unsigned long *supported, | 
|  | struct phylink_link_state *state) | 
|  | { | 
|  | struct dsa_port *dp = container_of(config, struct dsa_port, pl_config); | 
|  | struct dsa_switch *ds = dp->ds; | 
|  |  | 
|  | if (!ds->ops->phylink_validate) { | 
|  | if (config->mac_capabilities) | 
|  | phylink_generic_validate(config, supported, state); | 
|  | return; | 
|  | } | 
|  |  | 
|  | ds->ops->phylink_validate(ds, dp->index, supported, state); | 
|  | } | 
|  |  | 
|  | static void dsa_port_phylink_mac_pcs_get_state(struct phylink_config *config, | 
|  | struct phylink_link_state *state) | 
|  | { | 
|  | struct dsa_port *dp = container_of(config, struct dsa_port, pl_config); | 
|  | struct dsa_switch *ds = dp->ds; | 
|  | int err; | 
|  |  | 
|  | /* Only called for inband modes */ | 
|  | if (!ds->ops->phylink_mac_link_state) { | 
|  | state->link = 0; | 
|  | return; | 
|  | } | 
|  |  | 
|  | err = ds->ops->phylink_mac_link_state(ds, dp->index, state); | 
|  | if (err < 0) { | 
|  | dev_err(ds->dev, "p%d: phylink_mac_link_state() failed: %d\n", | 
|  | dp->index, err); | 
|  | state->link = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | static struct phylink_pcs * | 
|  | dsa_port_phylink_mac_select_pcs(struct phylink_config *config, | 
|  | phy_interface_t interface) | 
|  | { | 
|  | struct dsa_port *dp = container_of(config, struct dsa_port, pl_config); | 
|  | struct phylink_pcs *pcs = ERR_PTR(-EOPNOTSUPP); | 
|  | struct dsa_switch *ds = dp->ds; | 
|  |  | 
|  | if (ds->ops->phylink_mac_select_pcs) | 
|  | pcs = ds->ops->phylink_mac_select_pcs(ds, dp->index, interface); | 
|  |  | 
|  | return pcs; | 
|  | } | 
|  |  | 
|  | static void dsa_port_phylink_mac_config(struct phylink_config *config, | 
|  | unsigned int mode, | 
|  | const struct phylink_link_state *state) | 
|  | { | 
|  | struct dsa_port *dp = container_of(config, struct dsa_port, pl_config); | 
|  | struct dsa_switch *ds = dp->ds; | 
|  |  | 
|  | if (!ds->ops->phylink_mac_config) | 
|  | return; | 
|  |  | 
|  | ds->ops->phylink_mac_config(ds, dp->index, mode, state); | 
|  | } | 
|  |  | 
|  | static void dsa_port_phylink_mac_an_restart(struct phylink_config *config) | 
|  | { | 
|  | struct dsa_port *dp = container_of(config, struct dsa_port, pl_config); | 
|  | struct dsa_switch *ds = dp->ds; | 
|  |  | 
|  | if (!ds->ops->phylink_mac_an_restart) | 
|  | return; | 
|  |  | 
|  | ds->ops->phylink_mac_an_restart(ds, dp->index); | 
|  | } | 
|  |  | 
|  | static void dsa_port_phylink_mac_link_down(struct phylink_config *config, | 
|  | unsigned int mode, | 
|  | phy_interface_t interface) | 
|  | { | 
|  | struct dsa_port *dp = container_of(config, struct dsa_port, pl_config); | 
|  | struct phy_device *phydev = NULL; | 
|  | struct dsa_switch *ds = dp->ds; | 
|  |  | 
|  | if (dsa_port_is_user(dp)) | 
|  | phydev = dp->slave->phydev; | 
|  |  | 
|  | if (!ds->ops->phylink_mac_link_down) { | 
|  | if (ds->ops->adjust_link && phydev) | 
|  | ds->ops->adjust_link(ds, dp->index, phydev); | 
|  | return; | 
|  | } | 
|  |  | 
|  | ds->ops->phylink_mac_link_down(ds, dp->index, mode, interface); | 
|  | } | 
|  |  | 
|  | static void dsa_port_phylink_mac_link_up(struct phylink_config *config, | 
|  | struct phy_device *phydev, | 
|  | unsigned int mode, | 
|  | phy_interface_t interface, | 
|  | int speed, int duplex, | 
|  | bool tx_pause, bool rx_pause) | 
|  | { | 
|  | struct dsa_port *dp = container_of(config, struct dsa_port, pl_config); | 
|  | struct dsa_switch *ds = dp->ds; | 
|  |  | 
|  | if (!ds->ops->phylink_mac_link_up) { | 
|  | if (ds->ops->adjust_link && phydev) | 
|  | ds->ops->adjust_link(ds, dp->index, phydev); | 
|  | return; | 
|  | } | 
|  |  | 
|  | ds->ops->phylink_mac_link_up(ds, dp->index, mode, interface, phydev, | 
|  | speed, duplex, tx_pause, rx_pause); | 
|  | } | 
|  |  | 
|  | static const struct phylink_mac_ops dsa_port_phylink_mac_ops = { | 
|  | .validate = dsa_port_phylink_validate, | 
|  | .mac_select_pcs = dsa_port_phylink_mac_select_pcs, | 
|  | .mac_pcs_get_state = dsa_port_phylink_mac_pcs_get_state, | 
|  | .mac_config = dsa_port_phylink_mac_config, | 
|  | .mac_an_restart = dsa_port_phylink_mac_an_restart, | 
|  | .mac_link_down = dsa_port_phylink_mac_link_down, | 
|  | .mac_link_up = dsa_port_phylink_mac_link_up, | 
|  | }; | 
|  |  | 
|  | int dsa_port_phylink_create(struct dsa_port *dp) | 
|  | { | 
|  | struct dsa_switch *ds = dp->ds; | 
|  | phy_interface_t mode; | 
|  | struct phylink *pl; | 
|  | int err; | 
|  |  | 
|  | err = of_get_phy_mode(dp->dn, &mode); | 
|  | if (err) | 
|  | mode = PHY_INTERFACE_MODE_NA; | 
|  |  | 
|  | /* Presence of phylink_mac_link_state or phylink_mac_an_restart is | 
|  | * an indicator of a legacy phylink driver. | 
|  | */ | 
|  | if (ds->ops->phylink_mac_link_state || | 
|  | ds->ops->phylink_mac_an_restart) | 
|  | dp->pl_config.legacy_pre_march2020 = true; | 
|  |  | 
|  | if (ds->ops->phylink_get_caps) | 
|  | ds->ops->phylink_get_caps(ds, dp->index, &dp->pl_config); | 
|  |  | 
|  | pl = phylink_create(&dp->pl_config, of_fwnode_handle(dp->dn), | 
|  | mode, &dsa_port_phylink_mac_ops); | 
|  | if (IS_ERR(pl)) { | 
|  | pr_err("error creating PHYLINK: %ld\n", PTR_ERR(pl)); | 
|  | return PTR_ERR(pl); | 
|  | } | 
|  |  | 
|  | dp->pl = pl; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void dsa_port_phylink_destroy(struct dsa_port *dp) | 
|  | { | 
|  | phylink_destroy(dp->pl); | 
|  | dp->pl = NULL; | 
|  | } | 
|  |  | 
|  | static int dsa_shared_port_setup_phy_of(struct dsa_port *dp, bool enable) | 
|  | { | 
|  | struct dsa_switch *ds = dp->ds; | 
|  | struct phy_device *phydev; | 
|  | int port = dp->index; | 
|  | int err = 0; | 
|  |  | 
|  | phydev = dsa_port_get_phy_device(dp); | 
|  | if (!phydev) | 
|  | return 0; | 
|  |  | 
|  | if (IS_ERR(phydev)) | 
|  | return PTR_ERR(phydev); | 
|  |  | 
|  | if (enable) { | 
|  | err = genphy_resume(phydev); | 
|  | if (err < 0) | 
|  | goto err_put_dev; | 
|  |  | 
|  | err = genphy_read_status(phydev); | 
|  | if (err < 0) | 
|  | goto err_put_dev; | 
|  | } else { | 
|  | err = genphy_suspend(phydev); | 
|  | if (err < 0) | 
|  | goto err_put_dev; | 
|  | } | 
|  |  | 
|  | if (ds->ops->adjust_link) | 
|  | ds->ops->adjust_link(ds, port, phydev); | 
|  |  | 
|  | dev_dbg(ds->dev, "enabled port's phy: %s", phydev_name(phydev)); | 
|  |  | 
|  | err_put_dev: | 
|  | put_device(&phydev->mdio.dev); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int dsa_shared_port_fixed_link_register_of(struct dsa_port *dp) | 
|  | { | 
|  | struct device_node *dn = dp->dn; | 
|  | struct dsa_switch *ds = dp->ds; | 
|  | struct phy_device *phydev; | 
|  | int port = dp->index; | 
|  | phy_interface_t mode; | 
|  | int err; | 
|  |  | 
|  | err = of_phy_register_fixed_link(dn); | 
|  | if (err) { | 
|  | dev_err(ds->dev, | 
|  | "failed to register the fixed PHY of port %d\n", | 
|  | port); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | phydev = of_phy_find_device(dn); | 
|  |  | 
|  | err = of_get_phy_mode(dn, &mode); | 
|  | if (err) | 
|  | mode = PHY_INTERFACE_MODE_NA; | 
|  | phydev->interface = mode; | 
|  |  | 
|  | genphy_read_status(phydev); | 
|  |  | 
|  | if (ds->ops->adjust_link) | 
|  | ds->ops->adjust_link(ds, port, phydev); | 
|  |  | 
|  | put_device(&phydev->mdio.dev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int dsa_shared_port_phylink_register(struct dsa_port *dp) | 
|  | { | 
|  | struct dsa_switch *ds = dp->ds; | 
|  | struct device_node *port_dn = dp->dn; | 
|  | int err; | 
|  |  | 
|  | dp->pl_config.dev = ds->dev; | 
|  | dp->pl_config.type = PHYLINK_DEV; | 
|  |  | 
|  | err = dsa_port_phylink_create(dp); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | err = phylink_of_phy_connect(dp->pl, port_dn, 0); | 
|  | if (err && err != -ENODEV) { | 
|  | pr_err("could not attach to PHY: %d\n", err); | 
|  | goto err_phy_connect; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_phy_connect: | 
|  | dsa_port_phylink_destroy(dp); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /* During the initial DSA driver migration to OF, port nodes were sometimes | 
|  | * added to device trees with no indication of how they should operate from a | 
|  | * link management perspective (phy-handle, fixed-link, etc). Additionally, the | 
|  | * phy-mode may be absent. The interpretation of these port OF nodes depends on | 
|  | * their type. | 
|  | * | 
|  | * User ports with no phy-handle or fixed-link are expected to connect to an | 
|  | * internal PHY located on the ds->slave_mii_bus at an MDIO address equal to | 
|  | * the port number. This description is still actively supported. | 
|  | * | 
|  | * Shared (CPU and DSA) ports with no phy-handle or fixed-link are expected to | 
|  | * operate at the maximum speed that their phy-mode is capable of. If the | 
|  | * phy-mode is absent, they are expected to operate using the phy-mode | 
|  | * supported by the port that gives the highest link speed. It is unspecified | 
|  | * if the port should use flow control or not, half duplex or full duplex, or | 
|  | * if the phy-mode is a SERDES link, whether in-band autoneg is expected to be | 
|  | * enabled or not. | 
|  | * | 
|  | * In the latter case of shared ports, omitting the link management description | 
|  | * from the firmware node is deprecated and strongly discouraged. DSA uses | 
|  | * phylink, which rejects the firmware nodes of these ports for lacking | 
|  | * required properties. | 
|  | * | 
|  | * For switches in this table, DSA will skip enforcing validation and will | 
|  | * later omit registering a phylink instance for the shared ports, if they lack | 
|  | * a fixed-link, a phy-handle, or a managed = "in-band-status" property. | 
|  | * It becomes the responsibility of the driver to ensure that these ports | 
|  | * operate at the maximum speed (whatever this means) and will interoperate | 
|  | * with the DSA master or other cascade port, since phylink methods will not be | 
|  | * invoked for them. | 
|  | * | 
|  | * If you are considering expanding this table for newly introduced switches, | 
|  | * think again. It is OK to remove switches from this table if there aren't DT | 
|  | * blobs in circulation which rely on defaulting the shared ports. | 
|  | */ | 
|  | static const char * const dsa_switches_apply_workarounds[] = { | 
|  | #if IS_ENABLED(CONFIG_NET_DSA_XRS700X) | 
|  | "arrow,xrs7003e", | 
|  | "arrow,xrs7003f", | 
|  | "arrow,xrs7004e", | 
|  | "arrow,xrs7004f", | 
|  | #endif | 
|  | #if IS_ENABLED(CONFIG_B53) | 
|  | "brcm,bcm5325", | 
|  | "brcm,bcm53115", | 
|  | "brcm,bcm53125", | 
|  | "brcm,bcm53128", | 
|  | "brcm,bcm5365", | 
|  | "brcm,bcm5389", | 
|  | "brcm,bcm5395", | 
|  | "brcm,bcm5397", | 
|  | "brcm,bcm5398", | 
|  | "brcm,bcm53010-srab", | 
|  | "brcm,bcm53011-srab", | 
|  | "brcm,bcm53012-srab", | 
|  | "brcm,bcm53018-srab", | 
|  | "brcm,bcm53019-srab", | 
|  | "brcm,bcm5301x-srab", | 
|  | "brcm,bcm11360-srab", | 
|  | "brcm,bcm58522-srab", | 
|  | "brcm,bcm58525-srab", | 
|  | "brcm,bcm58535-srab", | 
|  | "brcm,bcm58622-srab", | 
|  | "brcm,bcm58623-srab", | 
|  | "brcm,bcm58625-srab", | 
|  | "brcm,bcm88312-srab", | 
|  | "brcm,cygnus-srab", | 
|  | "brcm,nsp-srab", | 
|  | "brcm,omega-srab", | 
|  | "brcm,bcm3384-switch", | 
|  | "brcm,bcm6328-switch", | 
|  | "brcm,bcm6368-switch", | 
|  | "brcm,bcm63xx-switch", | 
|  | #endif | 
|  | #if IS_ENABLED(CONFIG_NET_DSA_BCM_SF2) | 
|  | "brcm,bcm7445-switch-v4.0", | 
|  | "brcm,bcm7278-switch-v4.0", | 
|  | "brcm,bcm7278-switch-v4.8", | 
|  | #endif | 
|  | #if IS_ENABLED(CONFIG_NET_DSA_LANTIQ_GSWIP) | 
|  | "lantiq,xrx200-gswip", | 
|  | "lantiq,xrx300-gswip", | 
|  | "lantiq,xrx330-gswip", | 
|  | #endif | 
|  | #if IS_ENABLED(CONFIG_NET_DSA_MV88E6060) | 
|  | "marvell,mv88e6060", | 
|  | #endif | 
|  | #if IS_ENABLED(CONFIG_NET_DSA_MV88E6XXX) | 
|  | "marvell,mv88e6085", | 
|  | "marvell,mv88e6190", | 
|  | "marvell,mv88e6250", | 
|  | #endif | 
|  | #if IS_ENABLED(CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON) | 
|  | "microchip,ksz8765", | 
|  | "microchip,ksz8794", | 
|  | "microchip,ksz8795", | 
|  | "microchip,ksz8863", | 
|  | "microchip,ksz8873", | 
|  | "microchip,ksz9477", | 
|  | "microchip,ksz9897", | 
|  | "microchip,ksz9893", | 
|  | "microchip,ksz9563", | 
|  | "microchip,ksz8563", | 
|  | "microchip,ksz9567", | 
|  | #endif | 
|  | #if IS_ENABLED(CONFIG_NET_DSA_SMSC_LAN9303_MDIO) | 
|  | "smsc,lan9303-mdio", | 
|  | #endif | 
|  | #if IS_ENABLED(CONFIG_NET_DSA_SMSC_LAN9303_I2C) | 
|  | "smsc,lan9303-i2c", | 
|  | #endif | 
|  | NULL, | 
|  | }; | 
|  |  | 
|  | static void dsa_shared_port_validate_of(struct dsa_port *dp, | 
|  | bool *missing_phy_mode, | 
|  | bool *missing_link_description) | 
|  | { | 
|  | struct device_node *dn = dp->dn, *phy_np; | 
|  | struct dsa_switch *ds = dp->ds; | 
|  | phy_interface_t mode; | 
|  |  | 
|  | *missing_phy_mode = false; | 
|  | *missing_link_description = false; | 
|  |  | 
|  | if (of_get_phy_mode(dn, &mode)) { | 
|  | *missing_phy_mode = true; | 
|  | dev_err(ds->dev, | 
|  | "OF node %pOF of %s port %d lacks the required \"phy-mode\" property\n", | 
|  | dn, dsa_port_is_cpu(dp) ? "CPU" : "DSA", dp->index); | 
|  | } | 
|  |  | 
|  | /* Note: of_phy_is_fixed_link() also returns true for | 
|  | * managed = "in-band-status" | 
|  | */ | 
|  | if (of_phy_is_fixed_link(dn)) | 
|  | return; | 
|  |  | 
|  | phy_np = of_parse_phandle(dn, "phy-handle", 0); | 
|  | if (phy_np) { | 
|  | of_node_put(phy_np); | 
|  | return; | 
|  | } | 
|  |  | 
|  | *missing_link_description = true; | 
|  |  | 
|  | dev_err(ds->dev, | 
|  | "OF node %pOF of %s port %d lacks the required \"phy-handle\", \"fixed-link\" or \"managed\" properties\n", | 
|  | dn, dsa_port_is_cpu(dp) ? "CPU" : "DSA", dp->index); | 
|  | } | 
|  |  | 
|  | int dsa_shared_port_link_register_of(struct dsa_port *dp) | 
|  | { | 
|  | struct dsa_switch *ds = dp->ds; | 
|  | bool missing_link_description; | 
|  | bool missing_phy_mode; | 
|  | int port = dp->index; | 
|  |  | 
|  | dsa_shared_port_validate_of(dp, &missing_phy_mode, | 
|  | &missing_link_description); | 
|  |  | 
|  | if ((missing_phy_mode || missing_link_description) && | 
|  | !of_device_compatible_match(ds->dev->of_node, | 
|  | dsa_switches_apply_workarounds)) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (!ds->ops->adjust_link) { | 
|  | if (missing_link_description) { | 
|  | dev_warn(ds->dev, | 
|  | "Skipping phylink registration for %s port %d\n", | 
|  | dsa_port_is_cpu(dp) ? "CPU" : "DSA", dp->index); | 
|  | } else { | 
|  | if (ds->ops->phylink_mac_link_down) | 
|  | ds->ops->phylink_mac_link_down(ds, port, | 
|  | MLO_AN_FIXED, PHY_INTERFACE_MODE_NA); | 
|  |  | 
|  | return dsa_shared_port_phylink_register(dp); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | dev_warn(ds->dev, | 
|  | "Using legacy PHYLIB callbacks. Please migrate to PHYLINK!\n"); | 
|  |  | 
|  | if (of_phy_is_fixed_link(dp->dn)) | 
|  | return dsa_shared_port_fixed_link_register_of(dp); | 
|  | else | 
|  | return dsa_shared_port_setup_phy_of(dp, true); | 
|  | } | 
|  |  | 
|  | void dsa_shared_port_link_unregister_of(struct dsa_port *dp) | 
|  | { | 
|  | struct dsa_switch *ds = dp->ds; | 
|  |  | 
|  | if (!ds->ops->adjust_link && dp->pl) { | 
|  | rtnl_lock(); | 
|  | phylink_disconnect_phy(dp->pl); | 
|  | rtnl_unlock(); | 
|  | dsa_port_phylink_destroy(dp); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (of_phy_is_fixed_link(dp->dn)) | 
|  | of_phy_deregister_fixed_link(dp->dn); | 
|  | else | 
|  | dsa_shared_port_setup_phy_of(dp, false); | 
|  | } | 
|  |  | 
|  | int dsa_port_hsr_join(struct dsa_port *dp, struct net_device *hsr) | 
|  | { | 
|  | struct dsa_switch *ds = dp->ds; | 
|  | int err; | 
|  |  | 
|  | if (!ds->ops->port_hsr_join) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | dp->hsr_dev = hsr; | 
|  |  | 
|  | err = ds->ops->port_hsr_join(ds, dp->index, hsr); | 
|  | if (err) | 
|  | dp->hsr_dev = NULL; | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | void dsa_port_hsr_leave(struct dsa_port *dp, struct net_device *hsr) | 
|  | { | 
|  | struct dsa_switch *ds = dp->ds; | 
|  | int err; | 
|  |  | 
|  | dp->hsr_dev = NULL; | 
|  |  | 
|  | if (ds->ops->port_hsr_leave) { | 
|  | err = ds->ops->port_hsr_leave(ds, dp->index, hsr); | 
|  | if (err) | 
|  | dev_err(dp->ds->dev, | 
|  | "port %d failed to leave HSR %s: %pe\n", | 
|  | dp->index, hsr->name, ERR_PTR(err)); | 
|  | } | 
|  | } | 
|  |  | 
|  | int dsa_port_tag_8021q_vlan_add(struct dsa_port *dp, u16 vid, bool broadcast) | 
|  | { | 
|  | struct dsa_notifier_tag_8021q_vlan_info info = { | 
|  | .dp = dp, | 
|  | .vid = vid, | 
|  | }; | 
|  |  | 
|  | if (broadcast) | 
|  | return dsa_broadcast(DSA_NOTIFIER_TAG_8021Q_VLAN_ADD, &info); | 
|  |  | 
|  | return dsa_port_notify(dp, DSA_NOTIFIER_TAG_8021Q_VLAN_ADD, &info); | 
|  | } | 
|  |  | 
|  | void dsa_port_tag_8021q_vlan_del(struct dsa_port *dp, u16 vid, bool broadcast) | 
|  | { | 
|  | struct dsa_notifier_tag_8021q_vlan_info info = { | 
|  | .dp = dp, | 
|  | .vid = vid, | 
|  | }; | 
|  | int err; | 
|  |  | 
|  | if (broadcast) | 
|  | err = dsa_broadcast(DSA_NOTIFIER_TAG_8021Q_VLAN_DEL, &info); | 
|  | else | 
|  | err = dsa_port_notify(dp, DSA_NOTIFIER_TAG_8021Q_VLAN_DEL, &info); | 
|  | if (err) | 
|  | dev_err(dp->ds->dev, | 
|  | "port %d failed to notify tag_8021q VLAN %d deletion: %pe\n", | 
|  | dp->index, vid, ERR_PTR(err)); | 
|  | } |