blob: dde30ffdc23d84edcd1c3aa2be084a065e716a2c [file] [log] [blame]
/*
* Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
*
* (C) Copyright 2002 2003
* Network Audio Technologies, Inc. <www.netaudiotech.com>
* Adam Bezanson <bezanson@netaudiotech.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <netdev.h>
#include <asm/arch/ep93xx.h>
#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
#define MAX_BANK_SIZE 0x04000000 /* 64 MB */
static ulong const bank_addr[CONFIG_NR_DRAM_BANKS] = {
PHYS_SDRAM_1,
#ifdef PHYS_SDRAM_2
PHYS_SDRAM_2,
#endif
#ifdef PHYS_SDRAM_3
PHYS_SDRAM_3,
#endif
#ifdef PHYS_SDRAM_4
PHYS_SDRAM_4
#endif
};
int board_init(void)
{
struct syscon_regs *syscon = (struct syscon_regs *)SYSCON_BASE;
icache_enable();
#ifdef USE_920T_MMU
dcache_enable();
#endif
/*
* set UARTBAUD bit to drive UARTs with 14.7456MHz instead of
* 14.7456/2 MHz
*/
uint32_t value = readl(&syscon->pwrcnt);
value |= SYSCON_PWRCNT_UART_BAUD;
writel(value, &syscon->pwrcnt);
/* Enable the uart in devicecfg */
value = readl(&syscon->devicecfg);
value |= 1<<18 /* U1EN */;
writel(0xAA, &syscon->sysswlock);
writel(value, &syscon->devicecfg);
/* Machine number, as defined in linux/arch/arm/tools/mach-types */
gd->bd->bi_arch_number = CONFIG_MACH_TYPE;
/* adress of boot parameters */
gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
/* We have a console */
gd->have_console = 1;
return 0;
}
int board_eth_init(bd_t *bd)
{
return ep93xx_eth_initialize(0, MAC_BASE);
}
int dram_init(void)
{
unsigned int *src, *dst;
int i;
for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
const ulong bank_size = get_ram_size((long *)bank_addr[i],
MAX_BANK_SIZE);
if (bank_size) {
gd->bd->bi_dram[i].start = bank_addr[i];
gd->bd->bi_dram[i].size = bank_size;
}
}
/* copy exception vectors */
src = (unsigned int *)_armboot_start;
dst = (unsigned int *)PHYS_SDRAM_1;
memcpy(dst, src, 16 * sizeof(unsigned int));
return 0;
}