blob: 6c176961f17ae6007f67f26e6762d8dec92afee4 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2018, STMicroelectronics - All Rights Reserved
* Author: Fabrice Gasnier <fabrice.gasnier@st.com>
*
* Originally based on the Linux kernel v4.18 drivers/iio/adc/stm32-adc-core.c.
*/
#include <common.h>
#include <dm.h>
#include <asm/io.h>
#include <dm/device_compat.h>
#include <linux/bitops.h>
#include <power/regulator.h>
#include "stm32-adc-core.h"
/* STM32H7 - common registers for all ADC instances */
#define STM32H7_ADC_CCR (STM32_ADCX_COMN_OFFSET + 0x08)
/* STM32H7_ADC_CCR - bit fields */
#define STM32H7_PRESC_SHIFT 18
#define STM32H7_PRESC_MASK GENMASK(21, 18)
#define STM32H7_CKMODE_SHIFT 16
#define STM32H7_CKMODE_MASK GENMASK(17, 16)
/* STM32 H7 maximum analog clock rate (from datasheet) */
#define STM32H7_ADC_MAX_CLK_RATE 36000000
/**
* struct stm32h7_adc_ck_spec - specification for stm32h7 adc clock
* @ckmode: ADC clock mode, Async or sync with prescaler.
* @presc: prescaler bitfield for async clock mode
* @div: prescaler division ratio
*/
struct stm32h7_adc_ck_spec {
u32 ckmode;
u32 presc;
int div;
};
static const struct stm32h7_adc_ck_spec stm32h7_adc_ckmodes_spec[] = {
/* 00: CK_ADC[1..3]: Asynchronous clock modes */
{ 0, 0, 1 },
{ 0, 1, 2 },
{ 0, 2, 4 },
{ 0, 3, 6 },
{ 0, 4, 8 },
{ 0, 5, 10 },
{ 0, 6, 12 },
{ 0, 7, 16 },
{ 0, 8, 32 },
{ 0, 9, 64 },
{ 0, 10, 128 },
{ 0, 11, 256 },
/* HCLK used: Synchronous clock modes (1, 2 or 4 prescaler) */
{ 1, 0, 1 },
{ 2, 0, 2 },
{ 3, 0, 4 },
};
static int stm32h7_adc_clk_sel(struct udevice *dev,
struct stm32_adc_common *common)
{
u32 ckmode, presc;
unsigned long rate;
unsigned int i;
int div;
/* stm32h7 bus clock is common for all ADC instances (mandatory) */
if (!clk_valid(&common->bclk)) {
dev_err(dev, "No bclk clock found\n");
return -ENOENT;
}
/*
* stm32h7 can use either 'bus' or 'adc' clock for analog circuitry.
* So, choice is to have bus clock mandatory and adc clock optional.
* If optional 'adc' clock has been found, then try to use it first.
*/
if (clk_valid(&common->aclk)) {
/*
* Asynchronous clock modes (e.g. ckmode == 0)
* From spec: PLL output musn't exceed max rate
*/
rate = clk_get_rate(&common->aclk);
if (!rate) {
dev_err(dev, "Invalid aclk rate: 0\n");
return -EINVAL;
}
for (i = 0; i < ARRAY_SIZE(stm32h7_adc_ckmodes_spec); i++) {
ckmode = stm32h7_adc_ckmodes_spec[i].ckmode;
presc = stm32h7_adc_ckmodes_spec[i].presc;
div = stm32h7_adc_ckmodes_spec[i].div;
if (ckmode)
continue;
if ((rate / div) <= STM32H7_ADC_MAX_CLK_RATE)
goto out;
}
}
/* Synchronous clock modes (e.g. ckmode is 1, 2 or 3) */
rate = clk_get_rate(&common->bclk);
if (!rate) {
dev_err(dev, "Invalid bus clock rate: 0\n");
return -EINVAL;
}
for (i = 0; i < ARRAY_SIZE(stm32h7_adc_ckmodes_spec); i++) {
ckmode = stm32h7_adc_ckmodes_spec[i].ckmode;
presc = stm32h7_adc_ckmodes_spec[i].presc;
div = stm32h7_adc_ckmodes_spec[i].div;
if (!ckmode)
continue;
if ((rate / div) <= STM32H7_ADC_MAX_CLK_RATE)
goto out;
}
dev_err(dev, "clk selection failed\n");
return -EINVAL;
out:
/* rate used later by each ADC instance to control BOOST mode */
common->rate = rate / div;
/* Set common clock mode and prescaler */
clrsetbits_le32(common->base + STM32H7_ADC_CCR,
STM32H7_CKMODE_MASK | STM32H7_PRESC_MASK,
ckmode << STM32H7_CKMODE_SHIFT |
presc << STM32H7_PRESC_SHIFT);
dev_dbg(dev, "Using %s clock/%d source at %ld kHz\n",
ckmode ? "bus" : "adc", div, common->rate / 1000);
return 0;
}
static int stm32_adc_core_probe(struct udevice *dev)
{
struct stm32_adc_common *common = dev_get_priv(dev);
int ret;
common->base = dev_read_addr_ptr(dev);
if (!common->base) {
dev_err(dev, "can't get address\n");
return -ENOENT;
}
ret = device_get_supply_regulator(dev, "vref-supply", &common->vref);
if (ret) {
dev_err(dev, "can't get vref-supply: %d\n", ret);
return ret;
}
ret = regulator_get_value(common->vref);
if (ret < 0) {
dev_err(dev, "can't get vref-supply value: %d\n", ret);
return ret;
}
common->vref_uv = ret;
ret = clk_get_by_name(dev, "adc", &common->aclk);
if (!ret) {
ret = clk_enable(&common->aclk);
if (ret) {
dev_err(dev, "Can't enable aclk: %d\n", ret);
return ret;
}
}
ret = clk_get_by_name(dev, "bus", &common->bclk);
if (!ret) {
ret = clk_enable(&common->bclk);
if (ret) {
dev_err(dev, "Can't enable bclk: %d\n", ret);
goto err_aclk_disable;
}
}
ret = stm32h7_adc_clk_sel(dev, common);
if (ret)
goto err_bclk_disable;
return ret;
err_bclk_disable:
if (clk_valid(&common->bclk))
clk_disable(&common->bclk);
err_aclk_disable:
if (clk_valid(&common->aclk))
clk_disable(&common->aclk);
return ret;
}
static const struct udevice_id stm32_adc_core_ids[] = {
{ .compatible = "st,stm32h7-adc-core" },
{ .compatible = "st,stm32mp1-adc-core" },
{}
};
U_BOOT_DRIVER(stm32_adc_core) = {
.name = "stm32-adc-core",
.id = UCLASS_SIMPLE_BUS,
.of_match = stm32_adc_core_ids,
.probe = stm32_adc_core_probe,
.priv_auto = sizeof(struct stm32_adc_common),
};