blob: d5c8805df38ab1a607038e56ad6c18715ea19493 [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Based on acpi.c from coreboot
*
* Copyright (C) 2015, Saket Sinha <saket.sinha89@gmail.com>
* Copyright (C) 2016, Bin Meng <bmeng.cn@gmail.com>
*/
#ifndef __ASM_ACPI_TABLE_H__
#define __ASM_ACPI_TABLE_H__
#ifndef __ACPI__
#include <pci.h>
struct acpi_facs;
struct acpi_fadt;
struct acpi_global_nvs;
struct acpi_madt_ioapic;
struct acpi_madt_irqoverride;
struct acpi_madt_lapic_nmi;
struct acpi_mcfg_mmconfig;
struct acpi_table_header;
/* These can be used by the target port */
void acpi_fill_header(struct acpi_table_header *header, char *signature);
void acpi_create_fadt(struct acpi_fadt *fadt, struct acpi_facs *facs,
void *dsdt);
int acpi_create_madt_lapics(u32 current);
int acpi_create_madt_ioapic(struct acpi_madt_ioapic *ioapic, u8 id,
u32 addr, u32 gsi_base);
int acpi_create_madt_irqoverride(struct acpi_madt_irqoverride *irqoverride,
u8 bus, u8 source, u32 gsirq, u16 flags);
int acpi_create_madt_lapic_nmi(struct acpi_madt_lapic_nmi *lapic_nmi,
u8 cpu, u16 flags, u8 lint);
u32 acpi_fill_madt(u32 current);
int acpi_create_mcfg_mmconfig(struct acpi_mcfg_mmconfig *mmconfig, u32 base,
u16 seg_nr, u8 start, u8 end);
u32 acpi_fill_mcfg(u32 current);
u32 acpi_fill_csrt(u32 current);
/**
* acpi_write_hpet() - Write out a HPET table
*
* Write out the table for High-Precision Event Timers
*
* @ctx: Current ACPI context
* @return 0 if OK, -ve on error
*/
int acpi_write_hpet(struct acpi_ctx *ctx);
/**
* acpi_write_dbg2_pci_uart() - Write out a DBG2 table
*
* @ctx: Current ACPI context
* @dev: Debug UART device to describe
* @access_size: Access size for UART (e.g. ACPI_ACCESS_SIZE_DWORD_ACCESS)
* @return 0 if OK, -ve on error
*/
int acpi_write_dbg2_pci_uart(struct acpi_ctx *ctx, struct udevice *dev,
uint access_size);
/**
* acpi_create_gnvs() - Create a GNVS (Global Non Volatile Storage) table
*
* @gnvs: Table to fill in
* @return 0 if OK, -ve on error
*/
int acpi_create_gnvs(struct acpi_global_nvs *gnvs);
ulong write_acpi_tables(ulong start);
/**
* acpi_get_rsdp_addr() - get ACPI RSDP table address
*
* This routine returns the ACPI RSDP table address in the system memory.
*
* @return: ACPI RSDP table address
*/
ulong acpi_get_rsdp_addr(void);
/**
* arch_read_sci_irq_select() - Read the system-control interrupt number
*
* @returns value of IRQ register in the PMC
*/
int arch_read_sci_irq_select(void);
/**
* arch_write_sci_irq_select() - Set the system-control interrupt number
*
* @scis: New value for IRQ register in the PMC
*/
int arch_write_sci_irq_select(uint scis);
/**
* arch_madt_sci_irq_polarity() - Return the priority to use for the MADT
*
* @sci: System-control interrupt number
* @return priority to use (MP_IRQ_POLARITY_...)
*/
int arch_madt_sci_irq_polarity(int sci);
/**
* acpi_create_dmar_drhd() - Create a table for DMA remapping with the IOMMU
*
* See here for the specification
* https://software.intel.com/sites/default/files/managed/c5/15/vt-directed-io-spec.pdf
*
* @ctx: ACPI context pointer
* @flags: (DRHD_INCLUDE_...)
* @segment: PCI segment asscociated with this unit
* @bar: Base address of remapping hardware register-set for this unit
*/
void acpi_create_dmar_drhd(struct acpi_ctx *ctx, uint flags, uint segment,
u64 bar);
/**
* acpi_create_dmar_rmrr() - Set up an RMRR
*
* This sets up a Reserved-Memory Region Reporting structure, used to allow
* DMA to regions used by devices that the BIOS controls.
*
* @ctx: ACPI context pointer
* @segment: PCI segment asscociated with this unit
* @bar: Base address of mapping
* @limit: End address of mapping
*/
void acpi_create_dmar_rmrr(struct acpi_ctx *ctx, uint segment, u64 bar,
u64 limit);
/**
* acpi_dmar_drhd_fixup() - Set the length of an DRHD
*
* This sets the DRHD length field based on the current ctx->current
*
* @ctx: ACPI context pointer
* @base: Address of the start of the DRHD
*/
void acpi_dmar_drhd_fixup(struct acpi_ctx *ctx, void *base);
/**
* acpi_dmar_rmrr_fixup() - Set the length of an RMRR
*
* This sets the RMRR length field based on the current ctx->current
*
* @ctx: ACPI context pointer
* @base: Address of the start of the RMRR
*/
void acpi_dmar_rmrr_fixup(struct acpi_ctx *ctx, void *base);
/**
* acpi_create_dmar_ds_pci() - Set up a DMAR scope for a PCI device
*
* @ctx: ACPI context pointer
* @bdf: PCI device to add
* @return length of mapping in bytes
*/
int acpi_create_dmar_ds_pci(struct acpi_ctx *ctx, pci_dev_t bdf);
/**
* acpi_create_dmar_ds_pci_br() - Set up a DMAR scope for a PCI bridge
*
* This is used to provide a mapping for a PCI bridge
*
* @ctx: ACPI context pointer
* @bdf: PCI device to add
* @return length of mapping in bytes
*/
int acpi_create_dmar_ds_pci_br(struct acpi_ctx *ctx, pci_dev_t bdf);
/**
* acpi_create_dmar_ds_ioapic() - Set up a DMAR scope for an IOAPIC device
*
* @ctx: ACPI context pointer
* @enumeration_id: Enumeration ID (typically 2)
* @bdf: PCI device to add
* @return length of mapping in bytes
*/
int acpi_create_dmar_ds_ioapic(struct acpi_ctx *ctx, uint enumeration_id,
pci_dev_t bdf);
/**
* acpi_create_dmar_ds_msi_hpet() - Set up a DMAR scope for an HPET
*
* Sets up a scope for a High-Precision Event Timer that supports
* Message-Signalled Interrupts
*
* @ctx: ACPI context pointer
* @enumeration_id: Enumeration ID (typically 0)
* @bdf: PCI device to add
* @return length of mapping in bytes
*/
int acpi_create_dmar_ds_msi_hpet(struct acpi_ctx *ctx, uint enumeration_id,
pci_dev_t bdf);
/**
* acpi_fadt_common() - Handle common parts of filling out an FADT
*
* This sets up the Fixed ACPI Description Table
*
* @fadt: Pointer to place to put FADT
* @facs: Pointer to the FACS
* @dsdt: Pointer to the DSDT
*/
void acpi_fadt_common(struct acpi_fadt *fadt, struct acpi_facs *facs,
void *dsdt);
/**
* intel_acpi_fill_fadt() - Set up the contents of the FADT
*
* This sets up parts of the Fixed ACPI Description Table that are common to
* Intel chips
*
* @fadt: Pointer to place to put FADT
*/
void intel_acpi_fill_fadt(struct acpi_fadt *fadt);
#endif /* !__ACPI__ */
#endif /* __ASM_ACPI_TABLE_H__ */