blob: 046cd9e54e0209939abe562ac5c017cfabf00468 [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2015
* Texas Instruments Incorporated - http://www.ti.com/
*/
#ifndef _RPROC_H_
#define _RPROC_H_
/*
* Note: The platform data support is not meant for use with newer
* platforms. This is meant only for legacy devices. This mode of
* initialization *will* be eventually removed once all necessary
* platforms have moved to dm/fdt.
*/
#include <dm/platdata.h> /* For platform data support - non dt world */
/**
* enum rproc_mem_type - What type of memory model does the rproc use
* @RPROC_INTERNAL_MEMORY_MAPPED: Remote processor uses own memory and is memory
* mapped to the host processor over an address range.
*
* Please note that this is an enumeration of memory model of different types
* of remote processors. Few of the remote processors do have own internal
* memories, while others use external memory for instruction and data.
*/
enum rproc_mem_type {
RPROC_INTERNAL_MEMORY_MAPPED = 0,
};
/**
* struct dm_rproc_uclass_pdata - platform data for a CPU
* @name: Platform-specific way of naming the Remote proc
* @mem_type: one of 'enum rproc_mem_type'
* @driver_plat_data: driver specific platform data that may be needed.
*
* This can be accessed with dev_get_uclass_platdata() for any UCLASS_REMOTEPROC
* device.
*
*/
struct dm_rproc_uclass_pdata {
const char *name;
enum rproc_mem_type mem_type;
void *driver_plat_data;
};
/**
* struct dm_rproc_ops - Driver model remote proc operations.
*
* This defines the operations provided by remote proc driver.
*/
struct dm_rproc_ops {
/**
* init() - Initialize the remoteproc device (optional)
*
* This is called after the probe is completed allowing the remote
* processor drivers to split up the initializations between probe and
* init if needed.
*
* @dev: Remote proc device
* @return 0 if all ok, else appropriate error value.
*/
int (*init)(struct udevice *dev);
/**
* load() - Load the remoteproc device using data provided (mandatory)
*
* Load the remoteproc device with an image, do not start the device.
*
* @dev: Remote proc device
* @addr: Address of the image to be loaded
* @size: Size of the image to be loaded
* @return 0 if all ok, else appropriate error value.
*/
int (*load)(struct udevice *dev, ulong addr, ulong size);
/**
* start() - Start the remoteproc device (mandatory)
*
* @dev: Remote proc device
* @return 0 if all ok, else appropriate error value.
*/
int (*start)(struct udevice *dev);
/**
* stop() - Stop the remoteproc device (optional)
*
* @dev: Remote proc device
* @return 0 if all ok, else appropriate error value.
*/
int (*stop)(struct udevice *dev);
/**
* reset() - Reset the remoteproc device (optional)
*
* @dev: Remote proc device
* @return 0 if all ok, else appropriate error value.
*/
int (*reset)(struct udevice *dev);
/**
* is_running() - Check if the remote processor is running (optional)
*
* @dev: Remote proc device
* @return 0 if running, 1 if not running, -ve on error.
*/
int (*is_running)(struct udevice *dev);
/**
* ping() - Ping the remote device for basic communication (optional)
*
* @dev: Remote proc device
* @return 0 on success, 1 if not responding, -ve on other errors.
*/
int (*ping)(struct udevice *dev);
/**
* device_to_virt() - Return translated virtual address (optional)
*
* Translate a device address (remote processor view) to virtual
* address (main processor view).
*
* @dev: Remote proc device
* @da: Device address
* @size: Size of the memory region @da is pointing to
* @return virtual address.
*/
void * (*device_to_virt)(struct udevice *dev, ulong da, ulong size);
};
/* Accessor */
#define rproc_get_ops(dev) ((struct dm_rproc_ops *)(dev)->driver->ops)
#if CONFIG_IS_ENABLED(REMOTEPROC)
/**
* rproc_init() - Initialize all bound remote proc devices
* @return 0 if all ok, else appropriate error value.
*/
int rproc_init(void);
/**
* rproc_dev_init() - Initialize a remote proc device based on id
* @id: id of the remote processor
* @return 0 if all ok, else appropriate error value.
*/
int rproc_dev_init(int id);
/**
* rproc_is_initialized() - check to see if remoteproc devices are initialized
* @return true if all devices are initialized, false otherwise.
*/
bool rproc_is_initialized(void);
/**
* rproc_load() - load binary or elf to a remote processor
* @id: id of the remote processor
* @addr: address in memory where the image is located
* @size: size of the image
* @return 0 if all ok, else appropriate error value.
*/
int rproc_load(int id, ulong addr, ulong size);
/**
* rproc_start() - Start a remote processor
* @id: id of the remote processor
* @return 0 if all ok, else appropriate error value.
*/
int rproc_start(int id);
/**
* rproc_stop() - Stop a remote processor
* @id: id of the remote processor
* @return 0 if all ok, else appropriate error value.
*/
int rproc_stop(int id);
/**
* rproc_reset() - reset a remote processor
* @id: id of the remote processor
* @return 0 if all ok, else appropriate error value.
*/
int rproc_reset(int id);
/**
* rproc_ping() - ping a remote processor to check if it can communicate
* @id: id of the remote processor
* @return 0 if all ok, else appropriate error value.
*
* NOTE: this might need communication path available, which is not implemented
* as part of remoteproc framework - hook on to appropriate bus architecture to
* do the same
*/
int rproc_ping(int id);
/**
* rproc_is_running() - check to see if remote processor is running
* @id: id of the remote processor
* @return 0 if running, 1 if not running, -ve on error.
*
* NOTE: this may not involve actual communication capability of the remote
* processor, but just ensures that it is out of reset and executing code.
*/
int rproc_is_running(int id);
/**
* rproc_elf32_sanity_check() - Verify if an image is a valid ELF32 one
*
* Check if a valid ELF32 image exists at the given memory location. Verify
* basic ELF32 format requirements like magic number and sections size.
*
* @addr: address of the image to verify
* @size: size of the image
* @return 0 if the image looks good, else appropriate error value.
*/
int rproc_elf32_sanity_check(ulong addr, ulong size);
/**
* rproc_elf64_sanity_check() - Verify if an image is a valid ELF32 one
*
* Check if a valid ELF64 image exists at the given memory location. Verify
* basic ELF64 format requirements like magic number and sections size.
*
* @addr: address of the image to verify
* @size: size of the image
* @return 0 if the image looks good, else appropriate error value.
*/
int rproc_elf64_sanity_check(ulong addr, ulong size);
/**
* rproc_elf_sanity_check() - Verify if an image is a valid ELF one
*
* Check if a valid ELF image exists at the given memory location. Auto
* detects ELF32/ELF64 and verifies basic ELF64/ELF32 format requirements
* like magic number and sections size.
*
* @addr: address of the image to verify
* @size: size of the image
* @return 0 if the image looks good, else appropriate error value.
*/
int rproc_elf_sanity_check(ulong addr, ulong size);
/**
* rproc_elf32_load_image() - load an ELF32 image
* @dev: device loading the ELF32 image
* @addr: valid ELF32 image address
* @size: size of the image
* @return 0 if the image is successfully loaded, else appropriate error value.
*/
int rproc_elf32_load_image(struct udevice *dev, unsigned long addr, ulong size);
/**
* rproc_elf64_load_image() - load an ELF64 image
* @dev: device loading the ELF64 image
* @addr: valid ELF64 image address
* @size: size of the image
* @return 0 if the image is successfully loaded, else appropriate error value.
*/
int rproc_elf64_load_image(struct udevice *dev, ulong addr, ulong size);
/**
* rproc_elf_load_image() - load an ELF image
* @dev: device loading the ELF image
* @addr: valid ELF image address
* @size: size of the image
*
* Auto detects if the image is ELF32 or ELF64 image and load accordingly.
* @return 0 if the image is successfully loaded, else appropriate error value.
*/
int rproc_elf_load_image(struct udevice *dev, unsigned long addr, ulong size);
/**
* rproc_elf_get_boot_addr() - Get rproc's boot address.
* @dev: device loading the ELF image
* @addr: valid ELF image address
*
* This function returns the entry point address of the ELF
* image.
*/
ulong rproc_elf_get_boot_addr(struct udevice *dev, ulong addr);
#else
static inline int rproc_init(void) { return -ENOSYS; }
static inline int rproc_dev_init(int id) { return -ENOSYS; }
static inline bool rproc_is_initialized(void) { return false; }
static inline int rproc_load(int id, ulong addr, ulong size) { return -ENOSYS; }
static inline int rproc_start(int id) { return -ENOSYS; }
static inline int rproc_stop(int id) { return -ENOSYS; }
static inline int rproc_reset(int id) { return -ENOSYS; }
static inline int rproc_ping(int id) { return -ENOSYS; }
static inline int rproc_is_running(int id) { return -ENOSYS; }
static inline int rproc_elf32_sanity_check(ulong addr,
ulong size) { return -ENOSYS; }
static inline int rproc_elf64_sanity_check(ulong addr,
ulong size) { return -ENOSYS; }
static inline int rproc_elf_sanity_check(ulong addr,
ulong size) { return -ENOSYS; }
static inline int rproc_elf32_load_image(struct udevice *dev,
unsigned long addr, ulong size)
{ return -ENOSYS; }
static inline int rproc_elf64_load_image(struct udevice *dev, ulong addr,
ulong size)
{ return -ENOSYS; }
static inline int rproc_elf_load_image(struct udevice *dev, ulong addr,
ulong size)
{ return -ENOSYS; }
static inline ulong rproc_elf_get_boot_addr(struct udevice *dev, ulong addr)
{ return 0; }
#endif
#endif /* _RPROC_H_ */