| #!/bin/bash |
| # |
| # Copyright 2016 Google Inc. All Rights Reserved. |
| # |
| # This is a generic ChromeOS package/image test setup script. It is meant to |
| # be used for either the object file or package bisection tools. This script |
| # does one of the following depending on what ${BISECT_MODE} is set to: |
| # |
| # 1) ${BISECT_MODE} is PACKAGE_MODE: |
| # build_image is called and generates a new ChromeOS image using whatever |
| # packages are currently in the build tree. This image is then pushed to the |
| # remote machine using flash over ethernet (or usb flash if ethernet flash |
| # fails). |
| # |
| # 2) ${BISECT_MODE} is OBJECT_MODE: |
| # emerge is called for ${BISECT_PACKAGE} and generates a build for said |
| # package. This package is then deployed to the remote machine and the machine |
| # is rebooted. If deploying fails then a new ChromeOS image is built from |
| # scratch and pushed to the machine like in PACKAGE_MODE. |
| # |
| # This script is intended to be used by binary_search_state.py, as |
| # part of the binary search triage on ChromeOS objects and packages. It should |
| # return '0' if the setup succeeds; and '1' if the setup fails (the image |
| # could not build or be flashed). |
| # |
| |
| export PYTHONUNBUFFERED=1 |
| |
| source common/common.sh |
| |
| usb_flash() |
| { |
| echo |
| echo "Insert a usb stick into the current machine" |
| echo "Note: The cros flash will take time and doesn't give much output." |
| echo " Be patient. If your usb access light is flashing it's working." |
| sleep 1 |
| read -p "Press enter to continue" notused |
| |
| cros flash --board=${BISECT_BOARD} --clobber-stateful usb:// ~/trunk/src/build/images/${BISECT_BOARD}/latest/chromiumos_test_image.bin |
| |
| echo |
| echo "Flash to usb complete!" |
| echo "Plug the usb into your chromebook and install the image." |
| echo "Refer to the ChromiumOS Developer's Handbook for more details." |
| echo "http://www.chromium.org/chromium-os/developer-guide#TOC-Boot-from-your-USB-disk" |
| while true; do |
| sleep 1 |
| read -p "Was the installation of the image successful? " choice |
| case $choice in |
| [Yy]*) return 0;; |
| [Nn]*) return 1;; |
| *) echo "Please answer y or n.";; |
| esac |
| done |
| } |
| |
| ethernet_flash() |
| { |
| echo |
| echo "Please ensure your Chromebook is up and running Chrome so" |
| echo "cros flash may run." |
| echo "If your Chromebook has a broken image you can try:" |
| echo "1. Rebooting your Chromebook 6 times to install the last working image" |
| echo "2. Alternatively, running the following command on the Chromebook" |
| echo " will also rollback to the last working image:" |
| echo " 'update_engine_client --rollback --nopowerwash --reboot'" |
| echo "3. Flashing a new image through USB" |
| echo |
| sleep 1 |
| read -p $'Press enter to continue and retry the ethernet flash' notused |
| cros flash --board=${BISECT_BOARD} --clobber-stateful ${BISECT_REMOTE} ~/trunk/src/build/images/${BISECT_BOARD}/latest/chromiumos_test_image.bin |
| } |
| |
| reboot() |
| { |
| ret_val=0 |
| pushd ~/trunk/src/scripts > /dev/null |
| set -- --remote=${BISECT_REMOTE} |
| . ./common.sh || ret_val=1 |
| . ./remote_access.sh || ret_val=1 |
| TMP=$(mktemp -d) |
| FLAGS "$@" || ret_val=1 |
| remote_access_init || ret_val=1 |
| remote_reboot || ret_val=1 |
| popd > /dev/null |
| |
| return $ret_val |
| } |
| |
| echo |
| echo "INSTALLATION BEGIN" |
| echo |
| |
| if [[ "${BISECT_MODE}" == "OBJECT_MODE" ]]; then |
| echo "EMERGING ${BISECT_PACKAGE}" |
| CLEAN_DELAY=0 emerge-${BISECT_BOARD} -C ${BISECT_PACKAGE} |
| emerge-${BISECT_BOARD} ${BISECT_PACKAGE} |
| emerge_status=$? |
| |
| if [[ ${emerge_status} -ne 0 ]] ; then |
| echo "emerging ${BISECT_PACKAGE} returned a non-zero status: $emerge_status" |
| exit 1 |
| fi |
| |
| echo |
| echo "DEPLOYING" |
| echo "cros deploy ${BISECT_REMOTE} ${BISECT_PACKAGE}" |
| cros deploy ${BISECT_REMOTE} ${BISECT_PACKAGE} --log-level=info |
| deploy_status=$? |
| |
| if [[ ${deploy_status} -eq 0 ]] ; then |
| echo "Deploy successful. Rebooting device..." |
| reboot |
| if [[ $? -ne 0 ]] ; then |
| echo |
| echo "Could not automatically reboot device!" |
| read -p "Please manually reboot device and press enter to continue" notused |
| fi |
| exit 0 |
| fi |
| |
| echo "Deploy failed! Trying build_image/cros flash instead..." |
| echo |
| fi |
| |
| echo "BUILDING IMAGE" |
| pushd ~/trunk/src/scripts |
| ./build_image test --board=${BISECT_BOARD} --noenable_rootfs_verification --noeclean |
| build_status=$? |
| popd |
| |
| if [[ ${build_status} -eq 0 ]] ; then |
| echo |
| echo "FLASHING" |
| echo "Pushing built image onto device." |
| echo "cros flash --board=${BISECT_BOARD} --clobber-stateful ${BISECT_REMOTE} ~/trunk/src/build/images/${BISECT_BOARD}/latest/chromiumos_test_image.bin" |
| cros flash --board=${BISECT_BOARD} --clobber-stateful ${BISECT_REMOTE} ~/trunk/src/build/images/${BISECT_BOARD}/latest/chromiumos_test_image.bin |
| cros_flash_status=$? |
| while [[ ${cros_flash_status} -ne 0 ]] ; do |
| while true; do |
| echo |
| echo "cros flash has failed! From here you can:" |
| echo "1. Flash through USB" |
| echo "2. Retry flashing over ethernet" |
| echo "3. Abort this installation and skip this image" |
| echo "4. Abort this installation and mark test as failed" |
| sleep 1 |
| read -p "Which method would you like to do? " choice |
| case $choice in |
| 1) usb_flash && break;; |
| 2) ethernet_flash && break;; |
| 3) exit 125;; |
| 4) exit 1;; |
| *) echo "Please answer 1, 2, 3, or 4.";; |
| esac |
| done |
| |
| cros_flash_status=$? |
| done |
| else |
| echo "build_image returned a non-zero status: ${build_status}" |
| exit 1 |
| fi |
| |
| exit 0 |