| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2008-2009 coresystems GmbH |
| * Copyright (C) 2014 Google Inc. |
| * Copyright (C) 2015 Intel Corporation. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <chip.h> |
| #include <console/console.h> |
| #include <device/device.h> |
| #include <device/pci.h> |
| #include <device/pci_ids.h> |
| #include <arch/io.h> |
| #include <arch/ioapic.h> |
| #include <arch/acpi.h> |
| #include <cpu/cpu.h> |
| #include <pc80/mc146818rtc.h> |
| #include <reg_script.h> |
| #include <string.h> |
| #include <soc/gpio.h> |
| #include <soc/iomap.h> |
| #include <soc/pci_devs.h> |
| #include <soc/pmc.h> |
| #include <soc/pm.h> |
| #include <cpu/x86/smm.h> |
| #include <soc/pcr.h> |
| #include <soc/ramstage.h> |
| #include <vboot/vbnv.h> |
| #include <vboot/vbnv_layout.h> |
| |
| static const struct reg_script pch_pmc_misc_init_script[] = { |
| /* SLP_S4=4s, SLP_S3=50ms, disable SLP_X stretching after SUS loss. */ |
| REG_PCI_RMW16(GEN_PMCON_B, |
| ~(S4MAW_MASK | SLP_S3_MIN_ASST_WDTH_MASK), |
| S4MAW_4S | SLP_S3_MIN_ASST_WDTH_50MS | |
| DIS_SLP_X_STRCH_SUS_UP), |
| /* Enable SCI and clear SLP requests. */ |
| REG_IO_RMW32(ACPI_BASE_ADDRESS + PM1_CNT, ~SLP_TYP, SCI_EN), |
| REG_SCRIPT_END |
| }; |
| |
| static const struct reg_script pmc_write1_to_clear_script[] = { |
| REG_PCI_OR32(GEN_PMCON_A, 0), |
| REG_PCI_OR32(GEN_PMCON_B, 0), |
| REG_PCI_OR32(GEN_PMCON_B, 0), |
| REG_RES_OR32(PWRMBASE, GBLRST_CAUSE0, 0), |
| REG_RES_OR32(PWRMBASE, GBLRST_CAUSE1, 0), |
| REG_SCRIPT_END |
| }; |
| |
| static void pch_pmc_add_mmio_resources(device_t dev) |
| { |
| struct resource *res; |
| |
| /* Memory-mmapped I/O registers. */ |
| res = new_resource(dev, PWRMBASE); |
| res->base = PCH_PWRM_BASE_ADDRESS; |
| res->size = PCH_PWRM_BASE_SIZE; |
| res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | |
| IORESOURCE_FIXED | IORESOURCE_RESERVE; |
| } |
| |
| static void pch_pmc_add_io_resource(device_t dev, u16 base, u16 size, int index) |
| { |
| struct resource *res; |
| res = new_resource(dev, index); |
| res->base = base; |
| res->size = size; |
| res->flags = IORESOURCE_IO | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; |
| } |
| |
| static void pch_pmc_add_io_resources(device_t dev) |
| { |
| /* PMBASE */ |
| pch_pmc_add_io_resource(dev, ACPI_BASE_ADDRESS, ACPI_BASE_SIZE, ABASE); |
| } |
| |
| static void pch_pmc_read_resources(device_t dev) |
| { |
| /* Get the normal PCI resources of this device. */ |
| pci_dev_read_resources(dev); |
| |
| /* Add non-standard MMIO resources. */ |
| pch_pmc_add_mmio_resources(dev); |
| |
| /* Add IO resources. */ |
| pch_pmc_add_io_resources(dev); |
| } |
| |
| static void pch_set_acpi_mode(void) |
| { |
| if (IS_ENABLED(CONFIG_HAVE_SMI_HANDLER) && !acpi_is_wakeup_s3()) { |
| printk(BIOS_DEBUG, "Disabling ACPI via APMC:\n"); |
| outb(APM_CNT_ACPI_DISABLE, APM_CNT); |
| printk(BIOS_DEBUG, "done.\n"); |
| } |
| } |
| |
| static void pch_rtc_init(void) |
| { |
| u8 reg8; |
| int rtc_failed; |
| /*PMC Controller Device 0x1F, Func 02*/ |
| device_t dev = PCH_DEV_PMC; |
| reg8 = pci_read_config8(dev, GEN_PMCON_B); |
| rtc_failed = reg8 & RTC_BATTERY_DEAD; |
| if (rtc_failed) { |
| reg8 &= ~RTC_BATTERY_DEAD; |
| pci_write_config8(dev, GEN_PMCON_B, reg8); |
| printk(BIOS_DEBUG, "rtc_failed = 0x%x\n", rtc_failed); |
| } |
| |
| /* Ensure the date is set including century byte. */ |
| cmos_check_update_date(); |
| |
| if (IS_ENABLED(CONFIG_VBOOT_VBNV_CMOS)) |
| init_vbnv_cmos(rtc_failed); |
| else |
| cmos_init(rtc_failed); |
| } |
| |
| static void pch_power_options(void) |
| { |
| u16 reg16; |
| const char *state; |
| /*PMC Controller Device 0x1F, Func 02*/ |
| device_t dev = PCH_DEV_PMC; |
| /* Get the chip configuration */ |
| int pwr_on = CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL; |
| |
| /* |
| * Which state do we want to goto after g3 (power restored)? |
| * 0 == S0 Full On |
| * 1 == S5 Soft Off |
| * |
| * If the option is not existent (Laptops), use Kconfig setting. |
| */ |
| /*TODO: cmos_layout.bin need to verify; cause wrong CMOS setup*/ |
| //get_option(&pwr_on, "power_on_after_fail"); |
| pwr_on = MAINBOARD_POWER_ON; |
| reg16 = pci_read_config16(dev, GEN_PMCON_B); |
| reg16 &= 0xfffe; |
| switch (pwr_on) { |
| case MAINBOARD_POWER_OFF: |
| reg16 |= 1; |
| state = "off"; |
| break; |
| case MAINBOARD_POWER_ON: |
| reg16 &= ~1; |
| state = "on"; |
| break; |
| case MAINBOARD_POWER_KEEP: |
| reg16 &= ~1; |
| state = "state keep"; |
| break; |
| default: |
| state = "undefined"; |
| } |
| pci_write_config16(dev, GEN_PMCON_B, reg16); |
| printk(BIOS_INFO, "Set power %s after power failure.\n", state); |
| |
| /* Set up GPE configuration. */ |
| pmc_gpe_init(); |
| } |
| |
| static void config_deep_sX(uint32_t offset, uint32_t mask, int sx, int enable) |
| { |
| uint32_t reg; |
| uint8_t *pmcbase = pmc_mmio_regs(); |
| |
| printk(BIOS_DEBUG, "%sabling Deep S%c\n", |
| enable ? "En" : "Dis", sx + '0'); |
| reg = read32(pmcbase + offset); |
| if (enable) |
| reg |= mask; |
| else |
| reg &= ~mask; |
| write32(pmcbase + offset, reg); |
| } |
| |
| static void config_deep_s5(int on) |
| { |
| /* Treat S4 the same as S5. */ |
| config_deep_sX(S4_PWRGATE_POL, S4DC_GATE_SUS | S4AC_GATE_SUS, 4, on); |
| config_deep_sX(S5_PWRGATE_POL, S5DC_GATE_SUS | S5AC_GATE_SUS, 5, on); |
| } |
| |
| static void config_deep_s3(int on) |
| { |
| config_deep_sX(S3_PWRGATE_POL, S3DC_GATE_SUS | S3AC_GATE_SUS, 3, on); |
| } |
| |
| static void config_deep_sx(uint32_t deepsx_config) |
| { |
| uint32_t reg; |
| uint8_t *pmcbase = pmc_mmio_regs(); |
| |
| reg = read32(pmcbase + DSX_CFG); |
| reg &= ~DSX_CFG_MASK; |
| reg |= deepsx_config; |
| write32(pmcbase + DSX_CFG, reg); |
| } |
| |
| static void pmc_init(struct device *dev) |
| { |
| config_t *config = dev->chip_info; |
| |
| pch_rtc_init(); |
| |
| /* Initialize power management */ |
| pch_power_options(); |
| |
| /* Note that certain bits may be cleared from running script as |
| * certain bit fields are write 1 to clear. */ |
| reg_script_run_on_dev(dev, pch_pmc_misc_init_script); |
| pch_set_acpi_mode(); |
| |
| config_deep_s3(config->deep_s3_enable); |
| config_deep_s5(config->deep_s5_enable); |
| config_deep_sx(config->deep_sx_config); |
| |
| /* Clear registers that contain write-1-to-clear bits. */ |
| reg_script_run_on_dev(dev, pmc_write1_to_clear_script); |
| } |
| |
| static struct device_operations device_ops = { |
| .read_resources = &pch_pmc_read_resources, |
| .set_resources = &pci_dev_set_resources, |
| .enable_resources = &pci_dev_enable_resources, |
| .init = &pmc_init, |
| .scan_bus = &scan_lpc_bus, |
| .ops_pci = &soc_pci_ops, |
| }; |
| |
| static const unsigned short pci_device_ids[] = { |
| 0x9d21, |
| 0 |
| }; |
| |
| static const struct pci_driver pch_lpc __pci_driver = { |
| .ops = &device_ops, |
| .vendor = PCI_VENDOR_ID_INTEL, |
| .devices = pci_device_ids, |
| }; |