| ## |
| ## This file is part of the coreboot project. |
| ## |
| ## This program is free software; you can redistribute it and/or modify |
| ## it under the terms of the GNU General Public License as published by |
| ## the Free Software Foundation; version 2 of the License. |
| ## |
| ## This program is distributed in the hope that it will be useful, |
| ## but WITHOUT ANY WARRANTY; without even the implied warranty of |
| ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| ## GNU General Public License for more details. |
| ## |
| |
| config USB |
| bool "USB Support" |
| default y |
| |
| config USB_UHCI |
| bool "Support for USB UHCI controllers" |
| depends on USB && ARCH_X86 |
| default y if !CHROMEOS |
| help |
| Select this option if you are going to use USB 1.1 on an Intel based |
| system. |
| |
| config USB_OHCI |
| bool "Support for USB OHCI controllers" |
| depends on USB |
| default y if !CHROMEOS |
| help |
| Select this option if you are going to use USB 1.1 on a non-Intel based |
| system. |
| |
| config USB_EHCI |
| bool "Support for USB EHCI controllers" |
| depends on USB |
| default y if !CHROMEOS |
| help |
| Select this option if you want to use USB 2.0 |
| |
| config USB_XHCI |
| bool "Support for USB xHCI controllers" |
| depends on USB |
| default y if !CHROMEOS |
| help |
| Select this option if you want to use USB 3.0 |
| |
| config USB_XHCI_MTK_QUIRK |
| bool "Support for USB xHCI controllers on MTK SoC" |
| depends on USB_XHCI |
| help |
| Select this option if you want to use USB 3.0 on MTK platform. |
| |
| config USB_DWC2 |
| bool "Support for USB DesignWare HCD controllers" |
| depends on USB |
| help |
| Select this option if you want to use DesignWare USB 2.0 host controller |
| |
| config USB_HID |
| bool "Support for USB keyboards" |
| depends on USB |
| default y |
| help |
| Select this option if you want to use devices complying to the |
| USB HID (Human Interface Device) standard. Such devices are for |
| example keyboards and mice. Currently only keyboards are supported. |
| Say Y here unless you know exactly what you are doing. |
| |
| config USB_HUB |
| bool "Support for USB hubs" |
| depends on USB |
| default y |
| help |
| Select this option if you want to compile in support for USB hubs. |
| Say Y here unless you know exactly what you are doing. |
| |
| config USB_EHCI_HOSTPC_ROOT_HUB_TT |
| bool "Support for USB EHCI ROOT HUB that has TT" |
| depends on USB_EHCI |
| default n |
| help |
| Select this option if USB EHCI root hub supports TT (Transaction |
| Translator). |
| To support this TT feature we read port-speed from non-standard |
| register HOSTPC (offset 84h of Operational Register base). |
| |
| config USB_MSC |
| bool "Support for USB storage" |
| depends on USB |
| default y |
| help |
| Select this option if you want to compile in support for USB mass |
| storage devices (USB memory sticks, hard drives, CDROM/DVD drives) |
| Say Y here unless you know exactly what you are doing. |
| |
| config USB_GEN_HUB |
| bool |
| default n if (!USB_HUB && !USB_XHCI) |
| default y if (USB_HUB || USB_XHCI) |
| config USB_PCI |
| bool "Auto-scan PCI bus for USB host controllers" |
| depends on USB |
| default y if ARCH_X86 |
| default n |
| |
| config UDC |
| bool "USB device mode support" |
| default n |
| help |
| Select this option to add support for running as |
| a USB device. |
| |
| config UDC_CI |
| bool "ChipIdea driver for USB device mode" |
| depends on UDC |
| default n |
| help |
| Select this option to add the driver for ChipIdea |
| USB device controller. |
| |
| config UDC_DWC2 |
| bool "Designware driver for USB device mode" |
| depends on UDC |
| default n |
| help |
| Select this option to add the driver for Designware |
| USB device controller. |