| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2016 Intel Corp. |
| * (Written by Andrey Petrov <andrey.petrov@intel.com> for Intel Corp.) |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| #include <arch/cpu.h> |
| #include <bootblock_common.h> |
| #include <cpu/x86/mtrr.h> |
| #include <device/pci.h> |
| #include <intelblocks/pcr.h> |
| #include <intelblocks/systemagent.h> |
| #include <intelblocks/rtc.h> |
| #include <lib.h> |
| #include <soc/iomap.h> |
| #include <soc/cpu.h> |
| #include <soc/flash_ctrlr.h> |
| #include <soc/gpio.h> |
| #include <soc/mmap_boot.h> |
| #include <soc/systemagent.h> |
| #include <soc/pci_devs.h> |
| #include <soc/pm.h> |
| #include <soc/uart.h> |
| #include <spi-generic.h> |
| #include <timestamp.h> |
| |
| static const struct pad_config tpm_spi_configs[] = { |
| PAD_CFG_NF(GPIO_106, NATIVE, DEEP, NF3), /* FST_SPI_CS2_N */ |
| }; |
| |
| static void tpm_enable(void) |
| { |
| /* Configure gpios */ |
| gpio_configure_pads(tpm_spi_configs, ARRAY_SIZE(tpm_spi_configs)); |
| } |
| |
| asmlinkage void bootblock_c_entry(uint64_t base_timestamp) |
| { |
| device_t dev; |
| |
| bootblock_systemagent_early_init(); |
| |
| dev = PCH_DEV_P2SB; |
| /* BAR and MMIO enable for PCR-Space, so that GPIOs can be configured */ |
| pci_write_config32(dev, PCI_BASE_ADDRESS_0, CONFIG_PCR_BASE_ADDRESS); |
| pci_write_config32(dev, PCI_BASE_ADDRESS_1, 0); |
| pci_write_config16(dev, PCI_COMMAND, |
| PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); |
| |
| /* Decode the ACPI I/O port range for early firmware verification.*/ |
| dev = PCH_DEV_PMC; |
| pci_write_config16(dev, PCI_BASE_ADDRESS_4, ACPI_PMIO_BASE); |
| pci_write_config16(dev, PCI_COMMAND, |
| PCI_COMMAND_IO | PCI_COMMAND_MASTER); |
| |
| enable_rtc_upper_bank(); |
| |
| /* Call lib/bootblock.c main */ |
| bootblock_main_with_timestamp(base_timestamp); |
| } |
| |
| static void cache_bios_region(void) |
| { |
| int mtrr; |
| size_t rom_size; |
| uint32_t alignment; |
| |
| mtrr = get_free_var_mtrr(); |
| |
| if (mtrr == -1) |
| return; |
| |
| /* Only the IFD BIOS region is memory mapped (at top of 4G) */ |
| rom_size = get_bios_size(); |
| |
| if (!rom_size) |
| return; |
| |
| /* Round to power of two */ |
| alignment = 1 << (log2_ceil(rom_size)); |
| rom_size = ALIGN_UP(rom_size, alignment); |
| set_var_mtrr(mtrr, 4ULL*GiB - rom_size, rom_size, MTRR_TYPE_WRPROT); |
| } |
| |
| /* |
| * Program temporary BAR for SPI in case any of the stages before ramstage need |
| * to access SPI MMIO regs. Ramstage will assign a new BAR during PCI |
| * enumeration. |
| */ |
| static void enable_spibar(void) |
| { |
| device_t dev = PCH_DEV_SPI; |
| uint8_t val; |
| |
| /* Disable Bus Master and MMIO space. */ |
| val = pci_read_config8(dev, PCI_COMMAND); |
| val &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); |
| pci_write_config8(dev, PCI_COMMAND, val); |
| |
| /* Program Temporary BAR for SPI */ |
| pci_write_config32(dev, PCI_BASE_ADDRESS_0, |
| PRERAM_SPI_BASE_ADDRESS | |
| PCI_BASE_ADDRESS_SPACE_MEMORY); |
| |
| /* Enable Bus Master and MMIO Space */ |
| val = pci_read_config8(dev, PCI_COMMAND); |
| val |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; |
| pci_write_config8(dev, PCI_COMMAND, val); |
| |
| /* Initialize SPI to allow BIOS to write/erase on flash. */ |
| spi_flash_init(); |
| } |
| |
| static void enable_pmcbar(void) |
| { |
| device_t pmc = PCH_DEV_PMC; |
| |
| /* Set PMC base addresses and enable decoding. */ |
| pci_write_config32(pmc, PCI_BASE_ADDRESS_0, PMC_BAR0); |
| pci_write_config32(pmc, PCI_BASE_ADDRESS_1, 0); /* 64-bit BAR */ |
| pci_write_config32(pmc, PCI_BASE_ADDRESS_2, PMC_BAR1); |
| pci_write_config32(pmc, PCI_BASE_ADDRESS_3, 0); /* 64-bit BAR */ |
| pci_write_config16(pmc, PCI_BASE_ADDRESS_4, ACPI_PMIO_BASE); |
| pci_write_config16(pmc, PCI_COMMAND, |
| PCI_COMMAND_IO | PCI_COMMAND_MEMORY | |
| PCI_COMMAND_MASTER); |
| } |
| |
| void bootblock_soc_early_init(void) |
| { |
| enable_pmcbar(); |
| |
| /* Clear global reset promotion bit */ |
| global_reset_enable(0); |
| |
| /* Prepare UART for serial console. */ |
| if (IS_ENABLED(CONFIG_SOC_UART_DEBUG)) |
| pch_uart_init(); |
| |
| if (IS_ENABLED(CONFIG_TPM_ON_FAST_SPI)) |
| tpm_enable(); |
| |
| enable_pm_timer_emulation(); |
| |
| enable_spibar(); |
| |
| cache_bios_region(); |
| |
| /* Initialize GPE for use as interrupt status */ |
| pmc_gpe_init(); |
| } |