blob: e01675ef951281044d29ae676a7657612acd17fa [file] [log] [blame]
/*
* This file is part of the coreboot project.
*
* Copyright 2014 Google Inc.
* Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <console/console.h>
#include <delay.h>
#include <device/i2c.h>
#include <stdint.h>
#include <stdlib.h>
#include <boardid.h>
#include "pmic.h"
#include "reset.h"
enum {
AS3722_I2C_ADDR = 0x40
};
struct as3722_init_reg {
u8 reg;
u8 val;
u8 delay;
};
static struct as3722_init_reg init_list[] = {
{AS3722_SDO0, 0x3C, 1},
{AS3722_SDO1, 0x32, 0},
{AS3722_LDO3, 0x59, 0},
{AS3722_SDO2, 0x3C, 0},
{AS3722_SDO3, 0x00, 0},
{AS3722_SDO4, 0x00, 0},
{AS3722_SDO5, 0x50, 0},
{AS3722_SDO6, 0x28, 1},
{AS3722_LDO0, 0x8A, 0},
{AS3722_LDO1, 0x00, 0},
{AS3722_LDO2, 0x10, 0},
{AS3722_LDO4, 0x00, 0},
{AS3722_LDO5, 0x00, 0},
{AS3722_LDO6, 0x00, 0},
{AS3722_LDO7, 0x00, 0},
{AS3722_LDO9, 0x00, 0},
{AS3722_LDO10, 0x00, 0},
{AS3722_LDO11, 0x00, 1},
};
static void pmic_write_reg(unsigned bus, uint8_t reg, uint8_t val, int delay)
{
if (i2c_writeb(bus, AS3722_I2C_ADDR, reg, val)) {
printk(BIOS_ERR, "%s: reg = 0x%02X, value = 0x%02X failed!\n",
__func__, reg, val);
/* Reset the SoC on any PMIC write error */
cpu_reset();
} else {
if (delay)
udelay(500);
}
}
static void pmic_slam_defaults(unsigned bus)
{
int i;
for (i = 0; i < ARRAY_SIZE(init_list); i++) {
struct as3722_init_reg *reg = &init_list[i];
pmic_write_reg(bus, reg->reg, reg->val, reg->delay);
}
}
void pmic_init(unsigned bus)
{
/*
* Don't need to set up VDD_CORE - already done - by OTP
* Don't write SDCONTROL - it's already 0x7F, i.e. all SDs enabled.
* Don't write LDCONTROL - it's already 0xFF, i.e. all LDOs enabled.
*/
/* Restore PMIC POR defaults, in case kernel changed 'em */
pmic_slam_defaults(bus);
/* SDO0: Set VDD_CPU to 1.2V. */
pmic_write_reg(bus, 0x00, 0x50, 1);
/* SDO6: Set VDD_GPU to 1.0V. */
pmic_write_reg(bus, 0x06, 0x28, 1);
/* LDO2: Set +1.2V_GEN_AVDD to 1.2V */
pmic_write_reg(bus, 0x12, 0x10, 1);
/*
* Panel power GPIO O4. Set mode for GPIO4 (0x0c to 7), then set
* the value (register 0x20 bit 4)
*/
pmic_write_reg(bus, 0x0c, 0x07, 0);
pmic_write_reg(bus, 0x20, 0x10, 1);
printk(BIOS_DEBUG, "PMIC init done\n");
}