src/mainboard/supermicro/x10slm-f/romstage.c

/* SPDX-License-Identifier: GPL-2.0-only */

#include <northbridge/intel/haswell/haswell.h>
#include <northbridge/intel/haswell/raminit.h>
#include <southbridge/intel/lynxpoint/pch.h>

void mainboard_config_rcba(void)
{
	RCBA16(D31IR) = DIR_ROUTE(PIRQA, PIRQD, PIRQC, PIRQA);
	RCBA16(D29IR) = DIR_ROUTE(PIRQH, PIRQD, PIRQA, PIRQC);
	RCBA16(D28IR) = DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD);
	RCBA16(D27IR) = DIR_ROUTE(PIRQG, PIRQB, PIRQC, PIRQD);
	RCBA16(D26IR) = DIR_ROUTE(PIRQA, PIRQF, PIRQC, PIRQD);
	RCBA16(D25IR) = DIR_ROUTE(PIRQE, PIRQF, PIRQG, PIRQH);
	RCBA16(D22IR) = DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD);
	RCBA16(D20IR) = DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD);
}

void mb_get_spd_map(struct spd_info *spdi)
{
	spdi->addresses[0] = 0x50;
	spdi->addresses[1] = 0x51;
	spdi->addresses[2] = 0x52;
	spdi->addresses[3] = 0x53;
}

const struct usb2_port_config mainboard_usb2_ports[MAX_USB2_PORTS] = {
	/* Length, Enable, OCn#, Location */
	{ 0x0040, 1, 0, USB_PORT_INTERNAL },
	{ 0x0040, 1, 0, USB_PORT_BACK_PANEL },
	{ 0x0110, 1, 1, USB_PORT_BACK_PANEL },
	{ 0x0110, 1, 1, USB_PORT_BACK_PANEL },
	{ 0x0110, 1, 2, USB_PORT_BACK_PANEL },
	{ 0x0110, 1, 2, USB_PORT_BACK_PANEL },
	{ 0x0000, 0, USB_OC_PIN_SKIP, USB_PORT_SKIP },
	{ 0x0000, 0, USB_OC_PIN_SKIP, USB_PORT_SKIP },
	{ 0x0040, 1, 4, USB_PORT_BACK_PANEL },
	{ 0x0040, 1, 4, USB_PORT_BACK_PANEL },
	{ 0x0000, 0, USB_OC_PIN_SKIP, USB_PORT_SKIP },
	{ 0x0000, 0, USB_OC_PIN_SKIP, USB_PORT_SKIP },
	{ 0x0040, 1, 6, USB_PORT_BACK_PANEL },
	{ 0x0040, 1, 6, USB_PORT_BACK_PANEL },
};

const struct usb3_port_config mainboard_usb3_ports[MAX_USB3_PORTS] = {
	/* Enable, OCn# */
	{ 1, 1 },
	{ 1, 1 },
	{ 0, USB_OC_PIN_SKIP },
	{ 0, USB_OC_PIN_SKIP },
	{ 1, 3 },
	{ 1, 3 },
};