| /* SPDX-License-Identifier: GPL-2.0-or-later */ |
| |
| #include <console/console.h> |
| #include <baseboard/variants.h> |
| #include <device/device.h> |
| #include <drivers/tpm/cr50.h> |
| #include <ec/ec.h> |
| #include <fw_config.h> |
| #include <gpio.h> |
| #include <intelblocks/gpio.h> |
| #include <security/tpm/tss.h> |
| #include <intelblocks/tcss.h> |
| #include <soc/pci_devs.h> |
| #include <soc/ramstage.h> |
| #include <variant/gpio.h> |
| #include <vb2_api.h> |
| |
| #include "drivers/intel/pmc_mux/conn/chip.h" |
| |
| WEAK_DEV_PTR(conn1); |
| |
| static void typec_orientation_fixup(void) |
| { |
| const struct device *conn = DEV_PTR(conn1); |
| |
| if (!is_dev_enabled(conn)) |
| return; |
| |
| if (fw_config_probe(FW_CONFIG(DB_USB, USB4_GEN2)) |
| || fw_config_probe(FW_CONFIG(DB_USB, USB3_ACTIVE)) |
| || fw_config_probe(FW_CONFIG(DB_USB, USB4_GEN3)) |
| || fw_config_probe(FW_CONFIG(DB_USB, USB3_NO_A))) { |
| struct drivers_intel_pmc_mux_conn_config *config = conn->chip_info; |
| |
| if (config) { |
| printk(BIOS_INFO, |
| "Configure Right Type-C port orientation for retimer\n"); |
| config->sbu_orientation = TYPEC_ORIENTATION_NORMAL; |
| } |
| } |
| } |
| |
| static void mainboard_init(struct device *dev) |
| { |
| mainboard_ec_init(); |
| typec_orientation_fixup(); |
| variant_devtree_update(); |
| } |
| |
| void __weak variant_devtree_update(void) |
| { |
| } |
| |
| void __weak variant_ramstage_init(void) |
| { |
| /* Default weak implementation */ |
| } |
| |
| static void add_fw_config_oem_string(const struct fw_config *config, void *arg) |
| { |
| struct smbios_type11 *t; |
| char buffer[64]; |
| |
| t = (struct smbios_type11 *)arg; |
| |
| snprintf(buffer, sizeof(buffer), "%s-%s", config->field_name, config->option_name); |
| t->count = smbios_add_string(t->eos, buffer); |
| } |
| |
| static void mainboard_smbios_strings(struct device *dev, struct smbios_type11 *t) |
| { |
| fw_config_for_each_found(add_fw_config_oem_string, t); |
| } |
| |
| static void mainboard_enable(struct device *dev) |
| { |
| dev->ops->init = mainboard_init; |
| dev->ops->get_smbios_strings = mainboard_smbios_strings; |
| |
| variant_ramstage_init(); |
| } |
| |
| void mainboard_update_soc_chip_config(struct soc_intel_tigerlake_config *cfg) |
| { |
| int ret; |
| if (!CONFIG(TPM_GOOGLE_CR50) || !CONFIG(SPI_TPM)) { |
| /* |
| * Negotiation of long interrupt pulses is only supported via SPI. I2C is only |
| * used on reworked prototypes on which the TPM is replaced with Dauntless under |
| * development, it will use long pulses by default, or use the interrupt line in |
| * a different way altogether. |
| */ |
| return; |
| } |
| |
| ret = tlcl_lib_init(); |
| if (ret != VB2_SUCCESS) { |
| printk(BIOS_ERR, "tlcl_lib_init() failed: 0x%x\n", ret); |
| return; |
| } |
| |
| if (cr50_is_long_interrupt_pulse_enabled()) { |
| printk(BIOS_INFO, "Enabling S0i3.4\n"); |
| } else { |
| /* |
| * Disable S0i3.4, preventing the GPIO block from switching to |
| * slow clock. |
| */ |
| printk(BIOS_INFO, "Not enabling S0i3.4\n"); |
| cfg->LpmStateDisableMask |= LPM_S0i3_4; |
| cfg->gpio_override_pm = 1; |
| memset(cfg->gpio_pm, 0, sizeof(cfg->gpio_pm)); |
| } |
| } |
| |
| static void mainboard_chip_init(void *chip_info) |
| { |
| const struct pad_config *base_pads; |
| const struct pad_config *override_pads; |
| size_t base_num, override_num; |
| |
| base_pads = baseboard_gpio_table(&base_num); |
| override_pads = variant_override_gpio_table(&override_num); |
| |
| gpio_configure_pads_with_override(base_pads, base_num, override_pads, override_num); |
| |
| /* |
| * Check SATAXPCIE1 (GPP_A12) RX status to determine if SSD is NVMe or SATA and set |
| * the IOSSTATE RX field to drive 0 or 1 back to the internal controller to ensure |
| * the attached device is not mis-detected on resume from S0ix. |
| */ |
| if (gpio_get(GPP_A12)) { |
| const struct pad_config gpio_pedet_nvme[] = { |
| PAD_CFG_NF_IOSSTATE(GPP_A12, NONE, DEEP, NF1, HIZCRx1), |
| }; |
| gpio_configure_pads(gpio_pedet_nvme, ARRAY_SIZE(gpio_pedet_nvme)); |
| printk(BIOS_INFO, "SATAXPCIE1 indicates PCIe NVMe is present\n"); |
| } else { |
| const struct pad_config gpio_pedet_sata[] = { |
| PAD_CFG_NF_IOSSTATE(GPP_A12, NONE, DEEP, NF1, HIZCRx0), |
| }; |
| gpio_configure_pads(gpio_pedet_sata, ARRAY_SIZE(gpio_pedet_sata)); |
| printk(BIOS_INFO, "SATAXPCIE1 indicates SATA SSD is present\n"); |
| } |
| } |
| |
| struct chip_operations mainboard_ops = { |
| .init = mainboard_chip_init, |
| .enable_dev = mainboard_enable, |
| }; |