| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #include <cbfs.h> |
| #include <console/console.h> |
| #include <northbridge/intel/haswell/haswell.h> |
| #include <northbridge/intel/haswell/raminit.h> |
| #include <southbridge/intel/lynxpoint/pch.h> |
| #include <string.h> |
| #include <types.h> |
| |
| #include "variant.h" |
| |
| void mainboard_config_rcba(void) |
| { |
| /* |
| * GFX INTA -> PIRQA (MSI) |
| * D28IP_P1IP PCIE INTA -> PIRQA |
| * D29IP_E1P EHCI INTA -> PIRQD |
| * D20IP_XHCI XHCI INTA -> PIRQC (MSI) |
| * D31IP_SIP SATA INTA -> PIRQF (MSI) |
| * D31IP_SMIP SMBUS INTB -> PIRQG |
| * D31IP_TTIP THRT INTC -> PIRQA |
| * D27IP_ZIP HDA INTA -> PIRQG (MSI) |
| */ |
| |
| /* Device interrupt pin register (board specific) */ |
| RCBA32(D31IP) = (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | |
| (INTB << D31IP_SMIP) | (INTA << D31IP_SIP); |
| RCBA32(D29IP) = (INTA << D29IP_E1P); |
| RCBA32(D28IP) = (INTA << D28IP_P1IP) | (INTC << D28IP_P3IP) | |
| (INTB << D28IP_P4IP); |
| RCBA32(D27IP) = (INTA << D27IP_ZIP); |
| RCBA32(D26IP) = (INTA << D26IP_E2P); |
| RCBA32(D22IP) = (NOINT << D22IP_MEI1IP); |
| RCBA32(D20IP) = (INTA << D20IP_XHCI); |
| |
| /* Device interrupt route registers */ |
| RCBA16(D31IR) = DIR_ROUTE(PIRQG, PIRQC, PIRQB, PIRQA); /* LPC */ |
| RCBA16(D29IR) = DIR_ROUTE(PIRQD, PIRQD, PIRQD, PIRQD); /* EHCI */ |
| RCBA16(D28IR) = DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD); /* PCIE */ |
| RCBA16(D27IR) = DIR_ROUTE(PIRQG, PIRQG, PIRQG, PIRQG); /* HDA */ |
| RCBA16(D22IR) = DIR_ROUTE(PIRQA, PIRQA, PIRQA, PIRQA); /* ME */ |
| RCBA16(D21IR) = DIR_ROUTE(PIRQE, PIRQF, PIRQF, PIRQF); /* SIO */ |
| RCBA16(D20IR) = DIR_ROUTE(PIRQC, PIRQC, PIRQC, PIRQC); /* XHCI */ |
| RCBA16(D23IR) = DIR_ROUTE(PIRQH, PIRQH, PIRQH, PIRQH); /* SDIO */ |
| } |
| |
| void mb_get_spd_map(uint8_t spd_map[4]) |
| { |
| spd_map[0] = 0xff; |
| spd_map[2] = 0xff; |
| } |
| |
| unsigned int fill_spd_for_index(uint8_t spd[], unsigned int spd_index) |
| { |
| uint8_t *spd_file; |
| size_t spd_file_len; |
| |
| printk(BIOS_DEBUG, "SPD index %d\n", spd_index); |
| spd_file = cbfs_map("spd.bin", &spd_file_len); |
| if (!spd_file) |
| die("SPD data not found."); |
| |
| if (spd_file_len < ((spd_index + 1) * SPD_LEN)) { |
| printk(BIOS_ERR, "SPD index override to 0 - old hardware?\n"); |
| spd_index = 0; |
| } |
| |
| if (spd_file_len < SPD_LEN) |
| die("Missing SPD data."); |
| |
| memcpy(spd, spd_file + (spd_index * SPD_LEN), SPD_LEN); |
| |
| return spd_index; |
| } |