| chip soc/intel/cannonlake |
| |
| # Auto-switch between X4 NVMe and X2 NVMe. |
| register "TetonGlacierMode" = "1" |
| |
| register "SerialIoDevMode" = "{ |
| [PchSerialIoIndexI2C0] = PchSerialIoDisabled, |
| [PchSerialIoIndexI2C1] = PchSerialIoDisabled, |
| [PchSerialIoIndexI2C2] = PchSerialIoPci, |
| [PchSerialIoIndexI2C3] = PchSerialIoPci, |
| [PchSerialIoIndexI2C4] = PchSerialIoPci, |
| [PchSerialIoIndexI2C5] = PchSerialIoPci, |
| [PchSerialIoIndexSPI0] = PchSerialIoPci, |
| [PchSerialIoIndexSPI1] = PchSerialIoPci, |
| [PchSerialIoIndexSPI2] = PchSerialIoDisabled, |
| [PchSerialIoIndexUART0] = PchSerialIoSkipInit, |
| [PchSerialIoIndexUART1] = PchSerialIoDisabled, |
| [PchSerialIoIndexUART2] = PchSerialIoDisabled, |
| }" |
| |
| # USB configuration |
| register "usb2_ports[0]" = "{ |
| .enable = 1, |
| .ocpin = OC2, |
| .tx_bias = USB2_BIAS_0MV, |
| .tx_emp_enable = USB2_PRE_EMP_ON, |
| .pre_emp_bias = USB2_BIAS_11P25MV, |
| .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, |
| }" # Type-A Port 0 |
| register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C Port 0 |
| register "usb2_ports[2]" = "{ |
| .enable = 1, |
| .ocpin = OC3, |
| .tx_bias = USB2_BIAS_0MV, |
| .tx_emp_enable = USB2_PRE_EMP_ON, |
| .pre_emp_bias = USB2_BIAS_28P15MV, |
| .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, |
| }" # Type-A Port 1 |
| register "usb2_ports[3]" = "USB2_PORT_EMPTY" |
| register "usb2_ports[4]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C Port 1 |
| register "usb2_ports[5]" = "USB2_PORT_LONG(OC_SKIP)" # USB cam |
| register "usb2_ports[6]" = "USB2_PORT_EMPTY" |
| register "usb2_ports[7]" = "USB2_PORT_EMPTY" |
| register "usb2_ports[8]" = "USB2_PORT_EMPTY" |
| register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # BT |
| |
| register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-A Port 0 |
| register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC1)" # Type-A Port 1 |
| register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port 1 |
| register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port 0 |
| register "usb3_ports[4]" = "USB3_PORT_EMPTY" |
| register "usb3_ports[5]" = "USB3_PORT_EMPTY" |
| |
| # Bitmap for Wake Enable on USB attach/detach |
| register "usb2_wake_enable_bitmap" = "USB_PORT_WAKE_ENABLE(1) | \ |
| USB_PORT_WAKE_ENABLE(3)" |
| register "usb3_wake_enable_bitmap" = "USB_PORT_WAKE_ENABLE(1) | \ |
| USB_PORT_WAKE_ENABLE(2)" |
| |
| # Enable eMMC HS400 |
| register "ScsEmmcHs400Enabled" = "1" |
| |
| # EMMC Tx CMD Delay |
| # Refer to EDS-Vol2-14.3.7. |
| # [14:8] steps of delay for DDR mode, each 125ps, range: 0 - 39. |
| # [6:0] steps of delay for SDR mode, each 125ps, range: 0 - 39. |
| register "common_soc_config.emmc_dll.emmc_tx_cmd_cntl" = "0x505" |
| |
| # EMMC TX DATA Delay 1 |
| # Refer to EDS-Vol2-14.3.8. |
| # [14:8] steps of delay for HS400, each 125ps, range: 0 - 78. |
| # [6:0] steps of delay for SDR104/HS200, each 125ps, range: 0 - 79. |
| register "common_soc_config.emmc_dll.emmc_tx_data_cntl1" = "0x911" |
| |
| # EMMC TX DATA Delay 2 |
| # Refer to EDS-Vol2-14.3.9. |
| # [30:24] steps of delay for SDR50, each 125ps, range: 0 - 79. |
| # [22:16] steps of delay for DDR50, each 125ps, range: 0 - 78. |
| # [14:8] steps of delay for SDR25/HS50, each 125ps, range: 0 -79. |
| # [6:0] steps of delay for SDR12, each 125ps. Range: 0 - 79. |
| register "common_soc_config.emmc_dll.emmc_tx_data_cntl2" = "0x1C262828" |
| |
| # EMMC RX CMD/DATA Delay 1 |
| # Refer to EDS-Vol2-14.3.10. |
| # [30:24] steps of delay for SDR50, each 125ps, range: 0 - 119. |
| # [22:16] steps of delay for DDR50, each 125ps, range: 0 - 78. |
| # [14:8] steps of delay for SDR25/HS50, each 125ps, range: 0 - 119. |
| # [6:0] steps of delay for SDR12, each 125ps, range: 0 - 119. |
| register "common_soc_config.emmc_dll.emmc_rx_cmd_data_cntl1" = "0x1C16583b" |
| |
| # EMMC RX CMD/DATA Delay 2 |
| # Refer to EDS-Vol2-14.3.12. |
| # [17:16] stands for Rx Clock before Output Buffer, |
| # 00: Rx clock after output buffer, |
| # 01: Rx clock before output buffer, |
| # 10: Automatic selection based on working mode. |
| # 11: Reserved |
| # [14:8] steps of delay for Auto Tuning Mode, each 125ps, range: 0 - 39. |
| # [6:0] steps of delay for HS200, each 125ps, range: 0 - 79. |
| register "common_soc_config.emmc_dll.emmc_rx_cmd_data_cntl2" = "0x1001D" |
| |
| # EMMC Rx Strobe Delay |
| # Refer to EDS-Vol2-14.3.11. |
| # [14:8] Rx Strobe Delay DLL 1(HS400 Mode), each 125ps, range: 0 - 39. |
| # [6:0] Rx Strobe Delay DLL 2(HS400 Mode), each 125ps, range: 0 - 39. |
| register "common_soc_config.emmc_dll.emmc_rx_strobe_cntl" = "0x1515" |
| |
| # Intel Common SoC Config |
| #+-------------------+---------------------------+ |
| #| Field | Value | |
| #+-------------------+---------------------------+ |
| #| GSPI0 | cr50 TPM. Early init is | |
| #| | required to set up a BAR | |
| #| | for TPM communication | |
| #| | before memory is up | |
| #| I2C0 | ALC 1015 | |
| #| I2C2 | Lvds | |
| #| I2C3 | Touchscreen | |
| #| I2C4 | RT5682 | |
| #+-------------------+---------------------------+ |
| register "common_soc_config" = "{ |
| .gspi[0] = { |
| .speed_mhz = 1, |
| .early_init = 1, |
| }, |
| .i2c[0] = { |
| .speed = I2C_SPEED_FAST, |
| .rise_time_ns = 0, |
| .fall_time_ns = 0, |
| }, |
| .i2c[2] = { |
| .speed = I2C_SPEED_FAST, |
| .rise_time_ns = 60, |
| .fall_time_ns = 60, |
| }, |
| .i2c[3] = { |
| .speed = I2C_SPEED_FAST, |
| .rise_time_ns = 60, |
| .fall_time_ns = 60, |
| }, |
| .i2c[4] = { |
| .speed = I2C_SPEED_FAST, |
| .rise_time_ns = 60, |
| .fall_time_ns = 60, |
| }, |
| }" |
| |
| # PCIe port 11 (x2) for NVMe hybrid storage devices |
| register "PcieRpEnable[10]" = "1" |
| register "PcieRpLtrEnable[10]" = "1" |
| # Uses CLK SRC 0 |
| register "PcieClkSrcUsage[0]" = "6" |
| register "PcieClkSrcClkReq[0]" = "0" |
| |
| # SATA port 1 Gen3 Strength |
| # Port1 Tx De-Emphasis = 20*log(0x20/64) = -6dB |
| register "sata_port[1].TxGen3DeEmphEnable" = "1" |
| register "sata_port[1].TxGen3DeEmph" = "0x20" |
| |
| device domain 0 on |
| device pci 04.0 on |
| chip drivers/intel/dptf |
| ## Active Policy |
| register "policies.active[0]" = "{.target=DPTF_CPU, |
| .thresholds={TEMP_PCT(90, 85), |
| TEMP_PCT(85, 75), |
| TEMP_PCT(80, 65), |
| TEMP_PCT(75, 55), |
| TEMP_PCT(70, 45),}}" |
| register "policies.active[1]" = "{.target=DPTF_TEMP_SENSOR_0, |
| .thresholds={TEMP_PCT(50, 85), |
| TEMP_PCT(47, 75), |
| TEMP_PCT(45, 65), |
| TEMP_PCT(42, 55), |
| TEMP_PCT(39, 45),}}" |
| |
| ## Passive Policy |
| register "policies.passive[0]" = "DPTF_PASSIVE(CPU, CPU, 93, 5000)" |
| register "policies.passive[1]" = "DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 65, 6000)" |
| |
| ## Critical Policy |
| register "policies.critical[0]" = "DPTF_CRITICAL(CPU, 100, SHUTDOWN)" |
| register "policies.critical[1]" = "DPTF_CRITICAL(TEMP_SENSOR_0, 75, SHUTDOWN)" |
| |
| ## Power Limits Control |
| # PL1 is fixed at 15W, avg over 28-32s interval |
| # 25-64W PL2 in 1000mW increments, avg over 28-32s interval |
| register "controls.power_limits.pl1" = "{ |
| .min_power = 15000, |
| .max_power = 15000, |
| .time_window_min = 28 * MSECS_PER_SEC, |
| .time_window_max = 32 * MSECS_PER_SEC, |
| .granularity = 200,}" |
| register "controls.power_limits.pl2" = "{ |
| .min_power = 25000, |
| .max_power = 64000, |
| .time_window_min = 28 * MSECS_PER_SEC, |
| .time_window_max = 32 * MSECS_PER_SEC, |
| .granularity = 1000,}" |
| |
| ## Charger Performance Control (Control, mA) |
| register "controls.charger_perf[0]" = "{ 255, 1700 }" |
| register "controls.charger_perf[1]" = "{ 24, 1500 }" |
| register "controls.charger_perf[2]" = "{ 16, 1000 }" |
| register "controls.charger_perf[3]" = "{ 8, 500 }" |
| |
| ## Fan Performance Control (Percent, Speed, Noise, Power) |
| register "controls.fan_perf[0]" = "{ 90, 6700, 220, 2200, }" |
| register "controls.fan_perf[1]" = "{ 80, 5800, 180, 1800, }" |
| register "controls.fan_perf[2]" = "{ 70, 5000, 145, 1450, }" |
| register "controls.fan_perf[3]" = "{ 60, 4900, 115, 1150, }" |
| register "controls.fan_perf[4]" = "{ 50, 3838, 90, 900, }" |
| register "controls.fan_perf[5]" = "{ 40, 2904, 55, 550, }" |
| register "controls.fan_perf[6]" = "{ 30, 2337, 30, 300, }" |
| register "controls.fan_perf[7]" = "{ 20, 1608, 15, 150, }" |
| register "controls.fan_perf[8]" = "{ 10, 800, 10, 100, }" |
| register "controls.fan_perf[9]" = "{ 0, 0, 0, 50, }" |
| |
| # Fan options |
| register "options.fan.fine_grained_control" = "1" |
| register "options.fan.step_size" = "2" |
| |
| device generic 0 on end |
| end |
| end # DPTF 0x1903 |
| device pci 14.0 on |
| chip drivers/usb/acpi |
| device usb 0.0 on |
| chip drivers/usb/acpi |
| register "desc" = ""USB2 Type-A Port 0"" |
| register "type" = "UPC_TYPE_A" |
| register "group" = "ACPI_PLD_GROUP(1, 1)" |
| device usb 2.0 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB2 Type-C Port 0"" |
| register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" |
| register "group" = "ACPI_PLD_GROUP(2, 1)" |
| device usb 2.1 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB2 Type-A Port 1"" |
| register "type" = "UPC_TYPE_A" |
| register "group" = "ACPI_PLD_GROUP(1, 2)" |
| device usb 2.2 on end |
| end |
| chip drivers/usb/acpi |
| device usb 2.3 off end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB2 Type-C Port 1"" |
| register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" |
| register "group" = "ACPI_PLD_GROUP(2, 2)" |
| device usb 2.4 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""Camera"" |
| register "type" = "UPC_TYPE_INTERNAL" |
| device usb 2.5 on end |
| end |
| chip drivers/usb/acpi |
| device usb 2.6 off end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB3 Type-A Port 0"" |
| register "type" = "UPC_TYPE_USB3_A" |
| register "group" = "ACPI_PLD_GROUP(1, 1)" |
| device usb 3.0 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB3 Type-A Port 1"" |
| register "type" = "UPC_TYPE_USB3_A" |
| register "group" = "ACPI_PLD_GROUP(1, 2)" |
| device usb 3.1 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB3 Type-C Port 1"" |
| register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" |
| register "group" = "ACPI_PLD_GROUP(2, 2)" |
| device usb 3.2 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB3 Type-C Port 0"" |
| register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" |
| register "group" = "ACPI_PLD_GROUP(2, 1)" |
| device usb 3.3 on end |
| end |
| chip drivers/usb/acpi |
| device usb 3.4 off end |
| end |
| chip drivers/usb/acpi |
| device usb 3.5 off end |
| end |
| end |
| end |
| end # USB xHCI |
| device pci 14.5 off end # SDCard |
| device pci 15.0 on |
| chip drivers/i2c/generic |
| register "hid" = ""10EC1015"" |
| register "desc" = ""Realtek SPK AMP L"" |
| register "uid" = "0" |
| device i2c 28 on end |
| end |
| chip drivers/i2c/generic |
| register "hid" = ""10EC1015"" |
| register "desc" = ""Realtek SPK AMP R"" |
| register "uid" = "1" |
| device i2c 29 on end |
| end |
| end # I2C #0 ALC1015 |
| device pci 15.1 off end # I2C #1 |
| device pci 15.2 on end # I2C #2 LVDS |
| device pci 15.3 on end # I2C #3 Touchscreen |
| device pci 16.0 on end # Management Engine Interface 1 |
| device pci 19.0 on |
| chip drivers/i2c/generic |
| register "hid" = ""10EC5682"" |
| register "name" = ""RT58"" |
| register "desc" = ""Realtek RT5682"" |
| register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_H0)" |
| register "property_count" = "1" |
| # Set the jd_src to RT5668_JD1 for jack detection |
| register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" |
| register "property_list[0].name" = ""realtek,jd-src"" |
| register "property_list[0].integer" = "1" |
| device i2c 1a on end |
| end |
| end #I2C #4 |
| device pci 1a.0 on end # eMMC |
| device pci 1d.2 on # PCI Express Port 11 (X2 NVMe) |
| register "PcieRpSlotImplemented[10]" = "1" |
| end |
| device pci 1e.3 off end # GSPI #1 |
| end |
| |
| # VR Settings Configuration for 4 Domains |
| #+----------------+-------+-------+-------+-------+ |
| #| Domain/Setting | SA | IA | GTUS | GTS | |
| #+----------------+-------+-------+-------+-------+ |
| #| Psi1Threshold | 20A | 20A | 20A | 20A | |
| #| Psi2Threshold | 5A | 5A | 5A | 5A | |
| #| Psi3Threshold | 1A | 1A | 1A | 1A | |
| #| Psi3Enable | 1 | 1 | 1 | 1 | |
| #| Psi4Enable | 1 | 1 | 1 | 1 | |
| #| ImonSlope | 0 | 0 | 0 | 0 | |
| #| ImonOffset | 0 | 0 | 0 | 0 | |
| #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | |
| #| AcLoadline | 10.04 | 1.81 | 3.19 | 3.19 | |
| #| DcLoadline | 10.04 | 1.81 | 3.19 | 3.19 | |
| #+----------------+-------+-------+-------+-------+ |
| #Note: IccMax settings are moved to SoC code |
| register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ |
| .vr_config_enable = 1, |
| .psi1threshold = VR_CFG_AMP(20), |
| .psi2threshold = VR_CFG_AMP(5), |
| .psi3threshold = VR_CFG_AMP(1), |
| .psi3enable = 1, |
| .psi4enable = 1, |
| .imon_slope = 0x0, |
| .imon_offset = 0x0, |
| .icc_max = 0, |
| .voltage_limit = 1520, |
| .ac_loadline = 1004, |
| .dc_loadline = 1004, |
| }" |
| |
| register "domain_vr_config[VR_IA_CORE]" = "{ |
| .vr_config_enable = 1, |
| .psi1threshold = VR_CFG_AMP(20), |
| .psi2threshold = VR_CFG_AMP(5), |
| .psi3threshold = VR_CFG_AMP(1), |
| .psi3enable = 1, |
| .psi4enable = 1, |
| .imon_slope = 0x0, |
| .imon_offset = 0x0, |
| .icc_max = 0, |
| .voltage_limit = 1520, |
| .ac_loadline = 181, |
| .dc_loadline = 181, |
| }" |
| |
| register "domain_vr_config[VR_GT_UNSLICED]" = "{ |
| .vr_config_enable = 1, |
| .psi1threshold = VR_CFG_AMP(20), |
| .psi2threshold = VR_CFG_AMP(5), |
| .psi3threshold = VR_CFG_AMP(1), |
| .psi3enable = 1, |
| .psi4enable = 1, |
| .imon_slope = 0x0, |
| .imon_offset = 0x0, |
| .icc_max = 0, |
| .voltage_limit = 1520, |
| .ac_loadline = 319, |
| .dc_loadline = 319, |
| }" |
| |
| register "domain_vr_config[VR_GT_SLICED]" = "{ |
| .vr_config_enable = 1, |
| .psi1threshold = VR_CFG_AMP(20), |
| .psi2threshold = VR_CFG_AMP(5), |
| .psi3threshold = VR_CFG_AMP(1), |
| .psi3enable = 1, |
| .psi4enable = 1, |
| .imon_slope = 0x0, |
| .imon_offset = 0x0, |
| .icc_max = 0, |
| .voltage_limit = 1520, |
| .ac_loadline = 319, |
| .dc_loadline = 319, |
| }" |
| |
| end |
