| # SPDX-License-Identifier: GPL-2.0-or-later |
| |
| bootblock-y += gpio_baseboard_common.c |
| bootblock-$(CONFIG_BOARD_GOOGLE_BASEBOARD_TREMBYLE) += gpio_baseboard_trembyle.c |
| bootblock-$(CONFIG_BOARD_GOOGLE_BASEBOARD_DALBOZ) += gpio_baseboard_dalboz.c |
| |
| verstage-y += gpio_baseboard_common.c |
| ifeq ($(CONFIG_VBOOT_STARTS_BEFORE_BOOTBLOCK),y) |
| verstage-$(CONFIG_BOARD_GOOGLE_BASEBOARD_TREMBYLE) += gpio_baseboard_trembyle.c |
| verstage-$(CONFIG_BOARD_GOOGLE_BASEBOARD_DALBOZ) += gpio_baseboard_dalboz.c |
| endif |
| verstage-y += tpm_tis.c |
| |
| romstage-y += gpio_baseboard_common.c |
| romstage-$(CONFIG_BOARD_GOOGLE_BASEBOARD_TREMBYLE) += gpio_baseboard_trembyle.c |
| romstage-$(CONFIG_BOARD_GOOGLE_BASEBOARD_DALBOZ) += gpio_baseboard_dalboz.c |
| romstage-y += tpm_tis.c |
| |
| ramstage-y += gpio_baseboard_common.c |
| ramstage-$(CONFIG_BOARD_GOOGLE_BASEBOARD_TREMBYLE) += gpio_baseboard_trembyle.c |
| ramstage-$(CONFIG_BOARD_GOOGLE_BASEBOARD_TREMBYLE) += fsps_baseboard_trembyle.c |
| ramstage-$(CONFIG_BOARD_GOOGLE_BASEBOARD_DALBOZ) += gpio_baseboard_dalboz.c |
| ramstage-$(CONFIG_BOARD_GOOGLE_BASEBOARD_DALBOZ) += fsps_baseboard_dalboz.c |
| ramstage-y += helpers.c |
| ramstage-y += tpm_tis.c |
| ramstage-y += ramstage_common.c |
| |
| smm-y += gpio_baseboard_common.c |
| |
| # Add OEM ID table |
| ifeq ($(CONFIG_USE_OEM_BIN),y) |
| cbfs-files-y += oem.bin |
| oem.bin-file := $(call strip_quotes,$(CONFIG_OEM_BIN_FILE)) |
| oem.bin-type := raw |
| endif #($(CONFIG_USE_OEM_BIN),y) |
| |
| # APCB Board ID GPIO configuration. |
| # These GPIOs determine which memory SPD will be used during boot. |
| # APCB_BOARD_ID_GPIO[0-3] = GPIO_NUMBER GPIO_IO_MUX GPIO_BANK_CTL |
| # GPIO_NUMBER: FCH GPIO number |
| # GPIO_IO_MUX: Value write to IOMUX to configure this GPIO |
| # GPIO_BANK_CTL: Value write to GPIOBankCtl[23:16] to configure this GPIO |
| ifeq ($(CONFIG_BOARD_GOOGLE_BASEBOARD_TREMBYLE),y) |
| APCB_BOARD_ID_GPIO0 = 121 1 0 |
| APCB_BOARD_ID_GPIO1 = 120 1 0 |
| APCB_BOARD_ID_GPIO2 = 131 3 0 |
| APCB_BOARD_ID_GPIO3 = 116 1 0 |
| else ifeq ($(CONFIG_BOARD_GOOGLE_BASEBOARD_DALBOZ),y) |
| APCB_BOARD_ID_GPIO0 = 132 1 0 |
| APCB_BOARD_ID_GPIO1 = 90 1 0 |
| APCB_BOARD_ID_GPIO2 = 86 3 0 |
| APCB_BOARD_ID_GPIO3 = 69 1 0 |
| else |
| $(error Undefined APCB selection GPIOS for Zork baseboard) |
| endif #($(CONFIG_BOARD_GOOGLE_BASEBOARD_TREMBYLE),y) |
