Documentation/Intel/SoC/quark.html - mirrors/cros/chromiumos/third_party/coreboot - Git at Google

 <!DOCTYPE html>
 <html>
   <head>
     <title>Quark&trade; SoC</title>
   </head>
   <body>

 <h1>Intel&reg; Quark&trade; SoC</h1>
 <table>
   <tr>
     <td><a target="_blank" href="http://www.intel.com/content/dam/www/public/us/en/images/embedded/16x9/edc-quark-block-diagram-16x9.png"><img alt="Quark Block Diagram" src="http://www.intel.com/content/dam/www/public/us/en/images/embedded/16x9/edc-quark-block-diagram-16x9.png" width=500></a></td>
     <td>
       The Quark&trade; SoC code was developed using the
       <a target="_blank" href="../Board/galileo.html">Galileo Gen 2</a>
       board:
       <ul>
         <li><a target="_blank" href="../development.html">Overall</a> development</li>
         <li><a target="_blank" href="soc.html">SoC</a> support</li>
         <li><a target="_blank" href="../fsp1_1.html">FSP 1.1</a> integration</li>
         <li><a target="_blank" href="../Board/board.html">Board</a> support</li>
         <li><a target="_blank" href="#QuarkFsp">Quark&trade; FSP</a></li>
         <li><a target="_blank" href="#CorebootPayloadPkg">CorebootPayloadPkg</a></li>
       </ul>
     </td>
   </tr>
 </table>


 <hr>
 <h2>Quark&trade; Documentation</h2>
 <ul>
   <li><a target="_blank" href="http://www.intel.com/content/dam/www/public/us/en/images/embedded/16x9/edc-quark-block-diagram-16x9.png">Block Diagram</a></li>
   <li><a target="_blank" href="http://www.intel.com/content/www/us/en/embedded/products/quark/specifications.html">Specifications</a>:
     <ul>
       <li><a target="_blank" href="http://ark.intel.com/products/79084/Intel-Quark-SoC-X1000-16K-Cache-400-MHz">X1000</a>
         - <a target="_blank" href="http://www.intel.com/content/www/us/en/search.html?keyword=X1000">Documentation</a>:
         <ul>
           <li><a target="_blank" href="http://www.intel.com/content/dam/www/public/us/en/documents/datasheets/quark-x1000-datasheet.pdf">Datasheet</a></li>
           <li><a target="_blank" href="http://www.intel.com/content/dam/support/us/en/documents/processors/quark/sb/intelquarkcore_devman_001.pdf">Developer's Manual</a></li>
           <li><a target="_blank" href="http://www.intel.com/content/dam/www/public/us/en/documents/product-briefs/intel-quark-product-brief-v3.pdf">Product Brief</a></li>
         </ul>
       </li>
     </ul>
   </li>
   <li><a target="_blank" href="../index.html#Documentation">More documentation</a></li>
 </ul>


 <hr>
 <h2><a name="CorebootPayloadPkg">Quark&trade; EDK2 CorebootPayloadPkg</a></h2>
 <p>
 Build Instructions:
 </p>
 <ol>
   <li>Set up <a href="#BuildEnvironment">build environment</a></li>
   <li>Linux (assumes GCC48):
 <pre><code>build  -p CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc  -a IA32  \
     -t GCC48  -b DEBUG  -DDEBUG_PROPERTY_MASK=0x27  \
     -DDEBUG_PRINT_ERROR_LEVEL=0x80000042  -DSHELL_TYPE=BUILD_SHELL  \
     -DMAX_LOGICAL_PROCESSORS=1
 ls Build/CorebootPayloadPkgIA32/DEBUG_GCC48/FV/UEFIPAYLOAD.fd
 </code></pre>
   </li>
   <li>Windows (assumes Visual Studio 2015):
 <pre><code>build  -p CorebootPayloadPkg\CorebootPayloadPkgIa32.dsc  -a IA32  -t VS2015x86  -b DEBUG  -DDEBUG_PROPERTY_MASK=0x27  -DDEBUG_PRINT_ERROR_LEVEL=0x80000042  -DSHELL_TYPE=BUILD_SHELL  -DMAX_LOGICAL_PROCESSORS=1
 dir Build\CorebootPayloadPkgIA32\DEBUG_VS2015x86\FV\UEFIPAYLOAD.fd
 </code></pre>
   </li>
   <li>In the .config for coreboot, set the following Kconfig values:
     <ul>
       <li>CONFIG_PAYLOAD_ELF=y</li>
       <li>CONFIG_PAYLOAD_FILE="path to UEFIPAYLOAD.fd"</li>
     </ul>
   </li>
   <li>Build coreboot</li>
   <li>Copy the image build/coreboot.rom into flash</li>
 </ol>


 <hr>
 <h2><a name="BuildEnvironment">Quark&trade; EDK2 Build Environment</a></h2>
 <p>
   Use the following steps to setup a build environment:
 </p>
 <ol>
   <li>Get the EDK2 sources:
     <ol type="A">
       <li>EDK2: git clone <a target="_blank" href="https://github.com/tianocore/edk2.git">https://github.com/tianocore/edk2.git</a></li>
       <li>EDK2-non-osi: git clone <a target="_blank" href="https://github.com/tianocore/edk2-non-osi.git">https://github.com/tianocore/edk2-non-osi.git</a></li>
       <li>Win32 BaseTools: git clone <a target="_blank" href="https://github.com/tianocore/edk2-BaseTools-win32.git">https://github.com/tianocore/edk2-BaseTools-win32.git</a></li>
     </ol>
   </li>
   <li>Set up a build window:
     <ul>
       <li>Linux:
 <pre><code>export WORKSPACE=$PWD
 export PACKAGES_PATH="$PWD/edk2:$PWD/edk2-non-osi"
 cd edk2
 export WORKSPACE=$PWD
 . edksetup.sh
 </code></pre>
       </li>
       <li>Windows:
 <pre><code>set WORKSPACE=%CD%
 set PACKAGES_PATH=%WORKSPACE%\edk2;%WORKSPACE%\edk2-non-osi
 set EDK_TOOLS_BIN=%WORKSPACE%\edk2-BaseTools-win32
 cd edk2
 edksetup.bat
 </code></pre>
       </li>
     </ul>
   </li>
 </ol>


 <hr>
 <h2><a name="QuarkFsp">Quark&trade; FSP</a></h2>
 <p>
 Getting the Quark FSP source:
 </p>
 <ol>
   <li>Set up an EDK-II <a href="#BuildEnvironment">Build Environment</a></li>
   <li>cd edk2</li>
   <li>mkdir QuarkFspPkg</li>
   <li>cd QuarkFspPkg</li>
   <li>Use git to clone <a target="_blank" href="https://review.gerrithub.io/#/admin/projects/LeeLeahy/quarkfsp">QuarkFspPkg</a> into the QuarkFpsPkg directory (.)</li>
 </ol>

 <h3>Building QuarkFspPkg</h3>
 <p>
 There are two versions of FSP: FSP 1.1 and FSP 2.0.  There are also two
 different implementations of FSP, one using subroutines without SEC and
 PEI core and the original implementation which relies on SEC and PEI core.
 Finally there are two different build x86 types release (r32) and debug (d32).
 </p>
 <p>Note that the subroutine implementations are a <b>work in progress</b>.</p>
 <p>
 Build commands shown building debug FSP:
 </p>
 <ul>
   <li>Linux:
     <ul>
       <li>QuarkFspPkg/BuildFsp1_1.sh  -d32</li>
       <li>QuarkFspPkg/BuildFsp1_1Pei.sh  -d32</li>
       <li>QuarkFspPkg/BuildFsp2_0.sh  -d32</li>
       <li>QuarkFspPkg/BuildFsp2_0Pei.sh  -d32</li>
     </ul>
   <li>Windows:
     <ul>
       <li>QuarkFspPkg/BuildFsp1_1.bat  -d32</li>
       <li>Windows: QuarkFspPkg/BuildFsp2_0.bat  -d32</li>
     </ul>
   </li>
 </ul>

 <h3>Copying FSP files into coreboot Source Tree</h3>
 <p>
 There are some helper scripts to copy the FSP output into the coreboot
 source tree.  The parameters to these scripts are:
 </p>
 <ol>
   <li>EDK2 tree root</li>
   <li>coreboot tree root</li>
   <li>Build type: DEBUG or RELEASE</li>
 </ol>
 <p>
 Script files:
 </p>
 <ul>
   <li>Linux:
     <ul>
       <li>QuarkFspPkg/coreboot_fsp1_1.sh</li>
       <li>QuarkFspPkg/coreboot_fsp1_1Pei.sh</li>
       <li>QuarkFspPkg/coreboot_fsp2_0.sh</li>
       <li>QuarkFspPkg/coreboot_fsp2_0Pei.sh</li>
     </ul>
 </ul>


 <hr>
 <h2>Quark&trade; EDK2 BIOS</h2>
 <p>
 Build Instructions:
 </p>
 <ol>
   <li>Set up <a href="#BuildEnvironment">build environment</a></li>
   <li>Build the image:
     <ul>
       <li>Linux:
 <pre><code>build -p QuarkPlatformPkg/Quark.dsc  -a IA32  -t GCC48  -b DEBUG  -DDEBUG_PROPERTY_MASK=0x27  -DDEBUG_PRINT_ERROR_LEVEL=0x80000042
 ls Build/Quark/DEBUG_GCC48/FV/Quark.fd
 </code></pre>
       </li>
       <li>Windows:
 <pre><code>build -p QuarkPlatformPkg/Quark.dsc  -a IA32  -t VS2012x86  -b DEBUG  -DDEBUG_PROPERTY_MASK=0x27  -DDEBUG_PRINT_ERROR_LEVEL=0x80000042
 dir Build\Quark\DEBUG_VS2012x86\FV\Quark.fd
 </code></pre>
   </li>
     </ul>
   </li>
 </ol>

 <p>
 Documentation:
 </p>
 <ul>
   <li><a target="_blank" href="https://github.com/tianocore/edk2/tree/master/QuarkPlatformPkg">EDK II firmware for Intel&reg; Quark&trade; SoC X1000 based platforms</a></li>
   <li>Intel&reg; Quark&trade; SoC X1000 <a target="_blank" href="http://www.intel.com/content/dam/www/public/us/en/documents/guides/quark-x1000-uefi-firmware-writers-guide.pdf">UEFI Firmware Writer's Guide</a></li>
 </ul>


 <hr>
 <p>Modified: 17 May 2016</p>
   </body>
 </html>
	<!DOCTYPE html>
	<html>
	<head>
	<title>Quark™ SoC</title>
	</head>
	<body>

	<h1>Intel® Quark™ SoC</h1>
	<table>
	<tr>
	<td><a target="_blank" href="http://www.intel.com/content/dam/www/public/us/en/images/embedded/16x9/edc-quark-block-diagram-16x9.png"><img alt="Quark Block Diagram" src="http://www.intel.com/content/dam/www/public/us/en/images/embedded/16x9/edc-quark-block-diagram-16x9.png" width=500></a></td>
	<td>
	The Quark™ SoC code was developed using the
	<a target="_blank" href="../Board/galileo.html">Galileo Gen 2</a>
	board:
	<ul>
	<li><a target="_blank" href="../development.html">Overall</a> development</li>
	<li><a target="_blank" href="soc.html">SoC</a> support</li>
	<li><a target="_blank" href="../fsp1_1.html">FSP 1.1</a> integration</li>
	<li><a target="_blank" href="../Board/board.html">Board</a> support</li>
	<li><a target="_blank" href="#QuarkFsp">Quark™ FSP</a></li>
	<li><a target="_blank" href="#CorebootPayloadPkg">CorebootPayloadPkg</a></li>
	</ul>
	</td>
	</tr>
	</table>



	<hr>
	<h2>Quark™ Documentation</h2>
	<ul>
	<li><a target="_blank" href="http://www.intel.com/content/dam/www/public/us/en/images/embedded/16x9/edc-quark-block-diagram-16x9.png">Block Diagram</a></li>
	<li><a target="_blank" href="http://www.intel.com/content/www/us/en/embedded/products/quark/specifications.html">Specifications</a>:
	<ul>
	<li><a target="_blank" href="http://ark.intel.com/products/79084/Intel-Quark-SoC-X1000-16K-Cache-400-MHz">X1000</a>
	- <a target="_blank" href="http://www.intel.com/content/www/us/en/search.html?keyword=X1000">Documentation</a>:
	<ul>
	<li><a target="_blank" href="http://www.intel.com/content/dam/www/public/us/en/documents/datasheets/quark-x1000-datasheet.pdf">Datasheet</a></li>
	<li><a target="_blank" href="http://www.intel.com/content/dam/support/us/en/documents/processors/quark/sb/intelquarkcore_devman_001.pdf">Developer's Manual</a></li>
	<li><a target="_blank" href="http://www.intel.com/content/dam/www/public/us/en/documents/product-briefs/intel-quark-product-brief-v3.pdf">Product Brief</a></li>
	</ul>
	</li>
	</ul>
	</li>
	<li><a target="_blank" href="../index.html#Documentation">More documentation</a></li>
	</ul>



	<hr>
	<h2><a name="CorebootPayloadPkg">Quark™ EDK2 CorebootPayloadPkg</a></h2>
	<p>
	Build Instructions:
	</p>
	<ol>
	<li>Set up <a href="#BuildEnvironment">build environment</a></li>
	<li>Linux (assumes GCC48):
	<pre><code>build -p CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc -a IA32 \
	-t GCC48 -b DEBUG -DDEBUG_PROPERTY_MASK=0x27 \
	-DDEBUG_PRINT_ERROR_LEVEL=0x80000042 -DSHELL_TYPE=BUILD_SHELL \
	-DMAX_LOGICAL_PROCESSORS=1
	ls Build/CorebootPayloadPkgIA32/DEBUG_GCC48/FV/UEFIPAYLOAD.fd
	</code></pre>
	</li>
	<li>Windows (assumes Visual Studio 2015):
	<pre><code>build -p CorebootPayloadPkg\CorebootPayloadPkgIa32.dsc -a IA32 -t VS2015x86 -b DEBUG -DDEBUG_PROPERTY_MASK=0x27 -DDEBUG_PRINT_ERROR_LEVEL=0x80000042 -DSHELL_TYPE=BUILD_SHELL -DMAX_LOGICAL_PROCESSORS=1
	dir Build\CorebootPayloadPkgIA32\DEBUG_VS2015x86\FV\UEFIPAYLOAD.fd
	</code></pre>
	</li>
	<li>In the .config for coreboot, set the following Kconfig values:
	<ul>
	<li>CONFIG_PAYLOAD_ELF=y</li>
	<li>CONFIG_PAYLOAD_FILE="path to UEFIPAYLOAD.fd"</li>
	</ul>
	</li>
	<li>Build coreboot</li>
	<li>Copy the image build/coreboot.rom into flash</li>
	</ol>



	<hr>
	<h2><a name="BuildEnvironment">Quark™ EDK2 Build Environment</a></h2>
	<p>
	Use the following steps to setup a build environment:
	</p>
	<ol>
	<li>Get the EDK2 sources:
	<ol type="A">
	<li>EDK2: git clone <a target="_blank" href="https://github.com/tianocore/edk2.git">https://github.com/tianocore/edk2.git</a></li>
	<li>EDK2-non-osi: git clone <a target="_blank" href="https://github.com/tianocore/edk2-non-osi.git">https://github.com/tianocore/edk2-non-osi.git</a></li>
	<li>Win32 BaseTools: git clone <a target="_blank" href="https://github.com/tianocore/edk2-BaseTools-win32.git">https://github.com/tianocore/edk2-BaseTools-win32.git</a></li>
	</ol>
	</li>
	<li>Set up a build window:
	<ul>
	<li>Linux:
	<pre><code>export WORKSPACE=$PWD
	export PACKAGES_PATH="$PWD/edk2:$PWD/edk2-non-osi"
	cd edk2
	export WORKSPACE=$PWD
	. edksetup.sh
	</code></pre>
	</li>
	<li>Windows:
	<pre><code>set WORKSPACE=%CD%
	set PACKAGES_PATH=%WORKSPACE%\edk2;%WORKSPACE%\edk2-non-osi
	set EDK_TOOLS_BIN=%WORKSPACE%\edk2-BaseTools-win32
	cd edk2
	edksetup.bat
	</code></pre>
	</li>
	</ul>
	</li>
	</ol>



	<hr>
	<h2><a name="QuarkFsp">Quark™ FSP</a></h2>
	<p>
	Getting the Quark FSP source:
	</p>
	<ol>
	<li>Set up an EDK-II <a href="#BuildEnvironment">Build Environment</a></li>
	<li>cd edk2</li>
	<li>mkdir QuarkFspPkg</li>
	<li>cd QuarkFspPkg</li>
	<li>Use git to clone <a target="_blank" href="https://review.gerrithub.io/#/admin/projects/LeeLeahy/quarkfsp">QuarkFspPkg</a> into the QuarkFpsPkg directory (.)</li>
	</ol>

	<h3>Building QuarkFspPkg</h3>
	<p>
	There are two versions of FSP: FSP 1.1 and FSP 2.0. There are also two
	different implementations of FSP, one using subroutines without SEC and
	PEI core and the original implementation which relies on SEC and PEI core.
	Finally there are two different build x86 types release (r32) and debug (d32).
	</p>
	<p>Note that the subroutine implementations are a <b>work in progress</b>.</p>
	<p>
	Build commands shown building debug FSP:
	</p>
	<ul>
	<li>Linux:
	<ul>
	<li>QuarkFspPkg/BuildFsp1_1.sh -d32</li>
	<li>QuarkFspPkg/BuildFsp1_1Pei.sh -d32</li>
	<li>QuarkFspPkg/BuildFsp2_0.sh -d32</li>
	<li>QuarkFspPkg/BuildFsp2_0Pei.sh -d32</li>
	</ul>
	<li>Windows:
	<ul>
	<li>QuarkFspPkg/BuildFsp1_1.bat -d32</li>
	<li>Windows: QuarkFspPkg/BuildFsp2_0.bat -d32</li>
	</ul>
	</li>
	</ul>

	<h3>Copying FSP files into coreboot Source Tree</h3>
	<p>
	There are some helper scripts to copy the FSP output into the coreboot
	source tree. The parameters to these scripts are:
	</p>
	<ol>
	<li>EDK2 tree root</li>
	<li>coreboot tree root</li>
	<li>Build type: DEBUG or RELEASE</li>
	</ol>
	<p>
	Script files:
	</p>
	<ul>
	<li>Linux:
	<ul>
	<li>QuarkFspPkg/coreboot_fsp1_1.sh</li>
	<li>QuarkFspPkg/coreboot_fsp1_1Pei.sh</li>
	<li>QuarkFspPkg/coreboot_fsp2_0.sh</li>
	<li>QuarkFspPkg/coreboot_fsp2_0Pei.sh</li>
	</ul>
	</ul>


	<hr>
	<h2>Quark™ EDK2 BIOS</h2>
	<p>
	Build Instructions:
	</p>
	<ol>
	<li>Set up <a href="#BuildEnvironment">build environment</a></li>
	<li>Build the image:
	<ul>
	<li>Linux:
	<pre><code>build -p QuarkPlatformPkg/Quark.dsc -a IA32 -t GCC48 -b DEBUG -DDEBUG_PROPERTY_MASK=0x27 -DDEBUG_PRINT_ERROR_LEVEL=0x80000042
	ls Build/Quark/DEBUG_GCC48/FV/Quark.fd
	</code></pre>
	</li>
	<li>Windows:
	<pre><code>build -p QuarkPlatformPkg/Quark.dsc -a IA32 -t VS2012x86 -b DEBUG -DDEBUG_PROPERTY_MASK=0x27 -DDEBUG_PRINT_ERROR_LEVEL=0x80000042
	dir Build\Quark\DEBUG_VS2012x86\FV\Quark.fd
	</code></pre>
	</li>
	</ul>
	</li>
	</ol>

	<p>
	Documentation:
	</p>
	<ul>
	<li><a target="_blank" href="https://github.com/tianocore/edk2/tree/master/QuarkPlatformPkg">EDK II firmware for Intel® Quark™ SoC X1000 based platforms</a></li>
	<li>Intel® Quark™ SoC X1000 <a target="_blank" href="http://www.intel.com/content/dam/www/public/us/en/documents/guides/quark-x1000-uefi-firmware-writers-guide.pdf">UEFI Firmware Writer's Guide</a></li>
	</ul>



	<hr>
	<p>Modified: 17 May 2016</p>
	</body>
	</html>