| # SPDX-License-Identifier: GPL-2.0-or-later |
| |
| chip soc/amd/picasso |
| |
| # Start : OPN Performance Configuration |
| # See devhub #55593 Chapter 3.2 for documentation |
| # For the below fields, 0 indicates use SOC default |
| |
| # System config index |
| register "system_config" = "2" |
| |
| # Set STAPM confiuration. All of these fields must be set >0 to take affect |
| register "slow_ppt_limit_mW" = "25000" |
| register "fast_ppt_limit_mW" = "30000" |
| register "slow_ppt_time_constant_s" = "5" |
| register "stapm_time_constant_s" = "200" |
| register "sustained_power_limit_mW" = "15000" |
| |
| register "telemetry_vddcr_vdd_slope_mA" = "71222" |
| register "telemetry_vddcr_vdd_offset" = "0" |
| register "telemetry_vddcr_soc_slope_mA" = "28977" |
| register "telemetry_vddcr_soc_offset" = "0" |
| |
| # End : OPN Performance Configuration |
| |
| # Enable I2C2 for trackpad, touchscreen, pen at 400kHz |
| register "i2c[2]" = "{ |
| .speed = I2C_SPEED_FAST, |
| }" |
| |
| # Enable I2C3 for H1 400kHz |
| register "i2c[3]" = "{ |
| .speed = I2C_SPEED_FAST, |
| .early_init = true, |
| }" |
| |
| # See AMD 55570-B1 Table 13: PCI Device ID Assignments. |
| device domain 0 on |
| subsystemid 0x1022 0x1510 inherit |
| device pci 1.6 off end # GPP Bridge 5 |
| device pci 1.7 on end # GPP Bridge 6 - NVME |
| device pci 14.6 off end # Non-Functional SDHCI |
| end # domain |
| |
| device mmio 0xfedc4000 on end |
| |
| end # chip soc/amd/picasso |
