| ## SPDX-License-Identifier: GPL-2.0-or-later |
| |
| chip northbridge/intel/x4x # Northbridge |
| device cpu_cluster 0 on # APIC cluster |
| chip cpu/intel/socket_LGA775 |
| device lapic 0 on end |
| end |
| chip cpu/intel/model_1067x # CPU |
| device lapic 0xACAC off end |
| end |
| end |
| device domain 0 on # PCI domain |
| device pci 0.0 on end # Host Bridge |
| device pci 1.0 on end # PEG |
| device pci 2.0 on end # Integrated graphics controller |
| device pci 2.1 off end # Integrated graphics controller 2 |
| device pci 3.0 off end # ME |
| device pci 3.1 off end # ME |
| chip southbridge/intel/i82801gx # Southbridge |
| register "pirqa_routing" = "0x0a" |
| register "pirqb_routing" = "0x0b" |
| register "pirqc_routing" = "0x0a" |
| register "pirqd_routing" = "0x05" |
| register "pirqe_routing" = "0x0a" |
| register "pirqf_routing" = "0x0b" |
| register "pirqg_routing" = "0x0a" |
| register "pirqh_routing" = "0x03" |
| |
| register "gpe0_en" = "0x00000441" |
| register "alt_gp_smi_en" = "0x0000" |
| |
| register "ide_enable_primary" = "0x0" |
| register "ide_enable_secondary" = "0x0" |
| register "sata_ports_implemented" = "0x3" |
| |
| register "gen1_dec" = "0x003c0a01" # Super I/O EC and GPIO |
| |
| device pci 1b.0 on end # Audio |
| device pci 1c.0 on end # PCIe 1 |
| device pci 1c.1 on # PCIe 2 (NIC) |
| device pci 00.0 on end # PCI 10ec:8168 |
| end |
| device pci 1c.2 off end # PCIe 3 |
| device pci 1c.3 off end # PCIe 4 |
| device pci 1d.0 on end # USB |
| device pci 1d.1 on end # USB |
| device pci 1d.2 on end # USB |
| device pci 1d.3 on end # USB |
| device pci 1d.7 on end # USB |
| device pci 1e.0 on end # PCI bridge |
| device pci 1e.2 off end # AC'97 Audio |
| device pci 1e.3 off end # AC'97 Modem |
| device pci 1f.0 on # ISA bridge |
| chip superio/ite/it8720f # Super I/O |
| register "TMPIN1.mode" = "THERMAL_DIODE" |
| register "TMPIN1.offset" = "0" |
| register "TMPIN2.mode" = "THERMAL_RESISTOR" |
| register "TMPIN3.mode" = "THERMAL_MODE_DISABLED" |
| |
| register "ec.vin_mask" = "VIN_ALL" |
| |
| register "FAN1.mode" = "FAN_SMART_AUTOMATIC" # System fan |
| register "FAN1.smart.tmpin" = "1" |
| register "FAN1.smart.tmp_off" = "25" |
| register "FAN1.smart.tmp_start" = "30" |
| register "FAN1.smart.tmp_full" = "65" |
| register "FAN1.smart.tmp_delta" = "3" |
| register "FAN1.smart.smoothing" = "1" |
| register "FAN1.smart.pwm_start" = "20" |
| register "FAN1.smart.slope" = "10" |
| register "FAN2.mode" = "FAN_SMART_AUTOMATIC" # CPU fan |
| register "FAN2.smart.tmpin" = "1" |
| register "FAN2.smart.tmp_off" = "25" |
| register "FAN2.smart.tmp_start" = "30" |
| register "FAN2.smart.tmp_full" = "65" |
| register "FAN2.smart.tmp_delta" = "3" |
| register "FAN2.smart.smoothing" = "1" |
| register "FAN2.smart.pwm_start" = "20" |
| register "FAN2.smart.slope" = "10" |
| register "FAN3.mode" = "FAN_MODE_OFF" # Not connected |
| |
| device pnp 2e.0 off end # Floppy |
| device pnp 2e.1 on # COM1 |
| io 0x60 = 0x3f8 |
| irq 0x70 = 0x04 |
| irq 0xf0 = 0x00 |
| irq 0xf1 = 0x50 |
| end |
| device pnp 2e.2 on # COM2 (IR) |
| io 0x60 = 0x2f8 |
| irq 0x70 = 0x03 |
| irq 0xf0 = 0x10 # IrDA SIR mode |
| irq 0xf1 = 0x50 |
| end |
| device pnp 2e.3 off end # Parallel port |
| device pnp 2e.4 on # Environment controller |
| io 0x60 = 0xa10 |
| io 0x62 = 0xa00 |
| irq 0x70 = 0x00 |
| irq 0xf0 = 0x80 |
| irq 0xf1 = 0x00 |
| irq 0xf2 = 0x0a |
| irq 0xf3 = 0x00 |
| irq 0xf4 = 0x80 |
| irq 0xf5 = 0x00 |
| irq 0xf6 = 0x00 |
| end |
| device pnp 2e.5 on # Keyboard |
| io 0x60 = 0x060 |
| io 0x62 = 0x064 |
| irq 0x70 = 0x01 |
| irq 0xf0 = 0x00 |
| end |
| device pnp 2e.6 on # Mouse |
| irq 0x70 = 0x0c |
| irq 0xf0 = 0x00 |
| end |
| device pnp 2e.7 on # GPIO |
| io 0x60 = 0x000 |
| io 0x62 = 0xa20 |
| io 0x64 = 0xa30 |
| irq 0xf0 = 0x00 |
| irq 0xf1 = 0x00 |
| irq 0xf2 = 0x00 |
| irq 0xf3 = 0x00 |
| irq 0xf4 = 0x00 |
| irq 0xf5 = 0x00 |
| irq 0xf6 = 0x22 |
| irq 0xf7 = 0x00 |
| irq 0xf8 = 0x00 |
| irq 0xf9 = 0x00 |
| irq 0xfa = 0x00 |
| irq 0xfb = 0x00 |
| irq 0xfd = 0x00 |
| irq 0xfe = 0x00 |
| end |
| device pnp 2e.a on # CIR |
| io 0x60 = 0x3e0 |
| irq 0x70 = 0x0a |
| irq 0xf0 = 0x00 |
| end |
| end |
| end |
| device pci 1f.1 off end # PATA/IDE |
| device pci 1f.2 on end # SATA |
| device pci 1f.3 on end # SMbus |
| end |
| end |
| end |