src/include/spd.h - mirrors/cros/chromiumos/third_party/coreboot - Git at Google

 /* SPDX-License-Identifier: GPL-2.0-or-later */

 /*
  * Serial Presence Detect (SPD) data stored on SDRAM modules.
  *
  * Datasheet:
  *   - Name: PC SDRAM Serial Presence Detect (SPD) Specification
  *           Revision 1.2A, December, 1997
  *   - PDF: http://www.intel.com/design/chipsets/memory/spdsd12a.pdf
  *
  * Datasheet (alternative):
  *   - Name: SERIAL PRESENCE DETECT STANDARD, General Standard
  *           JEDEC Standard No. 21-C
  *     Annex J: Serial Presence Detects for DDR2 SDRAM (Revision 1.3):
  *   - PDF: http://www.jedec.org/download/search/4_01_02_10R17.pdf
  */

 #ifndef _SPD_H_
 #define _SPD_H_

 /* Byte numbers. */
 /* Number of bytes used by module manufacturer */
 #define SPD_NUM_MANUFACTURER_BYTES          0
 #define SPD_TOTAL_SPD_MEMORY_SIZE           1  /* Total SPD memory size */
 #define SPD_MEMORY_TYPE                     2  /* (Fundamental) memory type */
 #define SPD_NUM_ROWS                        3  /* Number of row address bits */
 /* Number of column address bits */
 #define SPD_NUM_COLUMNS                     4
 /* Number of module rows (banks) */
 #define SPD_NUM_DIMM_BANKS                  5
 #define SPD_MODULE_DATA_WIDTH_LSB           6  /* Module data width (LSB) */
 #define SPD_MODULE_DATA_WIDTH_MSB           7  /* Module data width (MSB) */
 /* Module interface signal levels */
 #define SPD_MODULE_VOLTAGE                  8
 /* SDRAM cycle time (highest CAS latency), RAS access time (tRAC) */
 #define SPD_MIN_CYCLE_TIME_AT_CAS_MAX       9
 /* SDRAM access time from clock (highest CAS latency), CAS access time (Tac,
  * tCAC)
  */
 #define SPD_ACCESS_TIME_FROM_CLOCK          10
 #define SPD_DIMM_CONFIG_TYPE                11 /* Module configuration type */
 #define SPD_REFRESH                         12 /* Refresh rate/type */
 #define SPD_PRIMARY_SDRAM_WIDTH             13 /* SDRAM width (primary SDRAM) */
 /* Error checking SDRAM (data) width */
 #define SPD_ERROR_CHECKING_SDRAM_WIDTH      14
 /* SDRAM device attributes, minimum clock delay for back to back random
  * column
  */
 #define SPD_MIN_CLOCK_DELAY_B2B_RAND_COLUMN 15
 /* SDRAM device attributes, burst lengths supported */
 #define SPD_SUPPORTED_BURST_LENGTHS         16
 /* SDRAM device attributes, number of banks on SDRAM device */
 #define SPD_NUM_BANKS_PER_SDRAM             17
 /* SDRAM device attributes, CAS latency */
 #define SPD_ACCEPTABLE_CAS_LATENCIES        18
 /* SDRAM device attributes, CS latency */
 #define SPD_CS_LATENCY                      19
 /* SDRAM device attributes, WE latency */
 #define SPD_WE_LATENCY                      20
 #define SPD_MODULE_ATTRIBUTES               21 /* SDRAM module attributes */
 /* SDRAM device attributes, general */
 #define SPD_DEVICE_ATTRIBUTES_GENERAL       22
 /* SDRAM cycle time (2nd highest CAS latency) */
 #define SPD_SDRAM_CYCLE_TIME_2ND            23
 /* SDRAM access from clock (2nd highest CAS latency) */
 #define SPD_ACCESS_TIME_FROM_CLOCK_2ND      24
 /* SDRAM cycle time (3rd highest CAS latency) */
 #define SPD_SDRAM_CYCLE_TIME_3RD            25
 /* SDRAM access from clock (3rd highest CAS latency) */
 #define SPD_ACCESS_TIME_FROM_CLOCK_3RD      26
 /* Minimum row precharge time (Trp) */
 #define SPD_MIN_ROW_PRECHARGE_TIME          27
 /* Minimum row active to row active (Trrd) */
 #define SPD_MIN_ROWACTIVE_TO_ROWACTIVE      28
 /* Minimum RAS to CAS delay (Trcd) */
 #define SPD_MIN_RAS_TO_CAS_DELAY            29
 /* Minimum RAS pulse width (Tras) */
 #define SPD_MIN_ACTIVE_TO_PRECHARGE_DELAY   30
 /* Density of each row on module */
 #define SPD_DENSITY_OF_EACH_ROW_ON_MODULE   31
 /* Command and address signal input setup time */
 #define SPD_CMD_SIGNAL_INPUT_SETUP_TIME     32
 /* Command and address signal input hold time */
 #define SPD_CMD_SIGNAL_INPUT_HOLD_TIME      33
 /* Data signal input setup time */
 #define SPD_DATA_SIGNAL_INPUT_SETUP_TIME    34
 #define SPD_DATA_SIGNAL_INPUT_HOLD_TIME     35 /* Data signal input hold time */
 #define SPD_WRITE_RECOVERY_TIME             36 /* Write recovery time (tWR) */
 /* Internal write to read command delay (tWTR) */
 #define SPD_INT_WRITE_TO_READ_DELAY         37
 /* Internal read to precharge command delay (tRTP) */
 #define SPD_INT_READ_TO_PRECHARGE_DELAY     38
 /* Memory analysis probe characteristics */
 #define SPD_MEM_ANALYSIS_PROBE_PARAMS       39
 /* Extension of byte 41 (tRC) and byte 42 (tRFC) */
 #define SPD_BYTE_41_42_EXTENSION            40
 /* Minimum active to active auto refresh (tRCmin) */
 #define SPD_MIN_ACT_TO_ACT_AUTO_REFRESH     41
 /* Minimum auto refresh to active/auto refresh (tRFC) */
 #define SPD_MIN_AUTO_REFRESH_TO_ACT         42
 /* Maximum device cycle time (tCKmax) */
 #define SPD_MAX_DEVICE_CYCLE_TIME           43
 /* Maximum skew between DQS and DQ (tDQSQ) */
 #define SPD_MAX_DQS_DQ_SKEW                 44
 /* Maximum read data-hold skew factor (tQHS) */
 #define SPD_MAX_READ_DATAHOLD_SKEW          45
 #define SPD_PLL_RELOCK_TIME                 46 /* PLL relock time */
 #define SPD_SPD_DATA_REVISION_CODE          62 /* SPD data revision code */
 #define SPD_CHECKSUM_FOR_BYTES_0_TO_62      63 /* Checksum for bytes 0-62 */
 /* Manufacturer's JEDEC ID code, per EIA/JEP106 (bytes 64-71) */
 #define SPD_MANUFACTURER_JEDEC_ID_CODE      64
 #define SPD_MANUFACTURING_LOCATION          72 /* Manufacturing location */
 /* Manufacturer's part number, in 6-bit ASCII (bytes 73-90) */
 #define SPD_MANUFACTURER_PART_NUMBER        73
 #define SPD_REVISION_CODE                   91 /* Revision code (bytes 91-92) */
 /* Manufacturing date (byte 93: year, byte 94: week) */
 #define SPD_MANUFACTURING_DATE              93
 /* Assembly serial number (bytes 95-98) */
 #define SPD_ASSEMBLY_SERIAL_NUMBER          95
 /* Manufacturer specific data (bytes 99-125) */
 #define SPD_MANUFACTURER_SPECIFIC_DATA      99
 /* Intel specification for frequency */
 #define SPD_INTEL_SPEC_FOR_FREQUENCY       126
 /* Intel specification details for 100MHz support */
 #define SPD_INTEL_SPEC_100_MHZ             127

 /* DRAM specifications use the following naming conventions for SPD locations */
 #define SPD_tRP                             SPD_MIN_ROW_PRECHARGE_TIME
 #define SPD_tRRD                            SPD_MIN_ROWACTIVE_TO_ROWACTIVE
 #define SPD_tRCD                            SPD_MIN_RAS_TO_CAS_DELAY
 #define SPD_tRAS                            SPD_MIN_ACTIVE_TO_PRECHARGE_DELAY
 #define SPD_BANK_DENSITY                    SPD_DENSITY_OF_EACH_ROW_ON_MODULE
 #define SPD_ADDRESS_CMD_HOLD                SPD_CMD_SIGNAL_INPUT_HOLD_TIME
 /* SDRAM Device Minimum Active to Active/Auto Refresh Time (tRC) */
 #define SPD_tRC				    41
 /* SDRAM Device Minimum Auto Refresh to Active/Auto Refresh (tRFC) */
 #define SPD_tRFC			    42

 /* SPD_MEMORY_TYPE values. */
 enum spd_memory_type {
 	SPD_MEMORY_TYPE_UNDEFINED		= 0x00,
 	SPD_MEMORY_TYPE_FPM_DRAM		= 0x01,
 	SPD_MEMORY_TYPE_EDO			= 0x02,
 	SPD_MEMORY_TYPE_PIPELINED_NIBBLE	= 0x03,
 	SPD_MEMORY_TYPE_SDRAM			= 0x04,
 	SPD_MEMORY_TYPE_MULTIPLEXED_ROM		= 0x05,
 	SPD_MEMORY_TYPE_SGRAM_DDR		= 0x06,
 	SPD_MEMORY_TYPE_SDRAM_DDR		= 0x07,
 	SPD_MEMORY_TYPE_SDRAM_DDR2		= 0x08,
 	SPD_MEMORY_TYPE_FBDIMM_DDR2		= 0x09,
 	SPD_MEMORY_TYPE_FB_PROBE_DDR2		= 0x0a,
 	SPD_MEMORY_TYPE_SDRAM_DDR3		= 0x0b,
 	SPD_MEMORY_TYPE_DDR4_SDRAM		= 0x0c,
 	SPD_MEMORY_TYPE_DDR4E_SDRAM		= 0x0e,
 	SPD_MEMORY_TYPE_LPDDR3_SDRAM		= 0x0f,
 	SPD_MEMORY_TYPE_LPDDR4_SDRAM		= 0x10,
 };

 /* SPD_MODULE_VOLTAGE values. */
 #define SPD_VOLTAGE_TTL                  0 /* 5.0 Volt/TTL */
 #define SPD_VOLTAGE_LVTTL                1 /* LVTTL */
 #define SPD_VOLTAGE_HSTL                 2 /* HSTL 1.5 */
 #define SPD_VOLTAGE_SSTL3                3 /* SSTL 3.3 */
 #define SPD_VOLTAGE_SSTL2                4 /* SSTL 2.5 */
 #define SPD_VOLTAGE_SSTL1                5 /* SSTL 1.8 */

 /* SPD_DIMM_CONFIG_TYPE values. */
 #define ERROR_SCHEME_NONE                0
 #define ERROR_SCHEME_PARITY              1
 #define ERROR_SCHEME_ECC                 2

 /* SPD_ACCEPTABLE_CAS_LATENCIES values. */
 // TODO: Check values.
 #define SPD_CAS_LATENCY_1_0              0x01
 #define SPD_CAS_LATENCY_1_5              0x02
 #define SPD_CAS_LATENCY_2_0              0x04
 #define SPD_CAS_LATENCY_2_5              0x08
 #define SPD_CAS_LATENCY_3_0              0x10
 #define SPD_CAS_LATENCY_3_5              0x20
 #define SPD_CAS_LATENCY_4_0              0x40

 #define SPD_CAS_LATENCY_DDR2_2		(1 << 2)
 #define SPD_CAS_LATENCY_DDR2_3		(1 << 3)
 #define SPD_CAS_LATENCY_DDR2_4		(1 << 4)
 #define SPD_CAS_LATENCY_DDR2_5		(1 << 5)
 #define SPD_CAS_LATENCY_DDR2_6		(1 << 6)
 #define SPD_CAS_LATENCY_DDR2_7		(1 << 7)

 /* SPD_SUPPORTED_BURST_LENGTHS values. */
 #define SPD_BURST_LENGTH_1               1
 #define SPD_BURST_LENGTH_2               2
 #define SPD_BURST_LENGTH_4               4
 #define SPD_BURST_LENGTH_8               8
 #define SPD_BURST_LENGTH_PAGE            (1 << 7)

 /* SPD_MODULE_ATTRIBUTES values. */
 #define MODULE_BUFFERED                  1
 #define MODULE_REGISTERED                2

 /* DIMM SPD addresses */
 #define DIMM0                            0x50
 #define DIMM1                            0x51
 #define DIMM2                            0x52
 #define DIMM3                            0x53
 #define DIMM4                            0x54
 #define DIMM5                            0x55
 #define DIMM6                            0x56
 #define DIMM7                            0x57

 #define RC00 0
 #define RC01 1
 #define RC02 2
 #define RC03 3
 #define RC04 4
 #define RC05 5
 #define RC06 6
 #define RC07 7
 #define RC08 8
 #define RC09 9
 #define RC10 10
 #define RC11 11
 #define RC12 12
 #define RC13 13
 #define RC14 14
 #define RC15 15
 #define RC16 16
 #define RC17 17
 #define RC18 18
 #define RC19 19
 #define RC20 20
 #define RC21 21
 #define RC22 22
 #define RC23 23
 #define RC24 24
 #define RC25 25
 #define RC26 26
 #define RC27 27
 #define RC28 28
 #define RC29 29
 #define RC30 30
 #define RC31 31

 #define RC32 32
 #define RC33 33
 #define RC34 34
 #define RC35 35
 #define RC36 36
 #define RC37 37
 #define RC38 38
 #define RC39 39
 #define RC40 40
 #define RC41 41
 #define RC42 42
 #define RC43 43
 #define RC44 44
 #define RC45 45
 #define RC46 46
 #define RC47 47
 #define RC48 48
 #define RC49 49
 #define RC50 50
 #define RC51 51
 #define RC52 52
 #define RC53 53
 #define RC54 54
 #define RC55 55
 #define RC56 56
 #define RC57 57
 #define RC58 58
 #define RC59 59
 #define RC60 60
 #define RC61 61
 #define RC62 62
 #define RC63 63

 /* Byte 3: Module type information */
 #define SPD_UNDEFINED 0x00
 #define SPD_RDIMM 0x01
 #define SPD_UDIMM 0x02
 #define SPD_SODIMM 0x04
 #define SPD_72B_SO_CDIMM 0x06
 #define SPD_72B_SO_RDIMM 0x07
 #define SPD_MICRO_DIMM 0x08
 #define SPD_MINI_RDIMM 0x10
 #define SPD_MINI_UDIMM 0x20

 #define SPD_ECC_8BIT (1<<3)

 #endif
	/* SPDX-License-Identifier: GPL-2.0-or-later */

	/*
	* Serial Presence Detect (SPD) data stored on SDRAM modules.
	*
	* Datasheet:
	* - Name: PC SDRAM Serial Presence Detect (SPD) Specification
	* Revision 1.2A, December, 1997
	* - PDF: http://www.intel.com/design/chipsets/memory/spdsd12a.pdf
	*
	* Datasheet (alternative):
	* - Name: SERIAL PRESENCE DETECT STANDARD, General Standard
	* JEDEC Standard No. 21-C
	* Annex J: Serial Presence Detects for DDR2 SDRAM (Revision 1.3):
	* - PDF: http://www.jedec.org/download/search/4_01_02_10R17.pdf
	*/

	#ifndef _SPD_H_
	#define _SPD_H_

	/* Byte numbers. */
	/* Number of bytes used by module manufacturer */
	#define SPD_NUM_MANUFACTURER_BYTES 0
	#define SPD_TOTAL_SPD_MEMORY_SIZE 1 /* Total SPD memory size */
	#define SPD_MEMORY_TYPE 2 /* (Fundamental) memory type */
	#define SPD_NUM_ROWS 3 /* Number of row address bits */
	/* Number of column address bits */
	#define SPD_NUM_COLUMNS 4
	/* Number of module rows (banks) */
	#define SPD_NUM_DIMM_BANKS 5
	#define SPD_MODULE_DATA_WIDTH_LSB 6 /* Module data width (LSB) */
	#define SPD_MODULE_DATA_WIDTH_MSB 7 /* Module data width (MSB) */
	/* Module interface signal levels */
	#define SPD_MODULE_VOLTAGE 8
	/* SDRAM cycle time (highest CAS latency), RAS access time (tRAC) */
	#define SPD_MIN_CYCLE_TIME_AT_CAS_MAX 9
	/* SDRAM access time from clock (highest CAS latency), CAS access time (Tac,
	* tCAC)
	*/
	#define SPD_ACCESS_TIME_FROM_CLOCK 10
	#define SPD_DIMM_CONFIG_TYPE 11 /* Module configuration type */
	#define SPD_REFRESH 12 /* Refresh rate/type */
	#define SPD_PRIMARY_SDRAM_WIDTH 13 /* SDRAM width (primary SDRAM) */
	/* Error checking SDRAM (data) width */
	#define SPD_ERROR_CHECKING_SDRAM_WIDTH 14
	/* SDRAM device attributes, minimum clock delay for back to back random
	* column
	*/
	#define SPD_MIN_CLOCK_DELAY_B2B_RAND_COLUMN 15
	/* SDRAM device attributes, burst lengths supported */
	#define SPD_SUPPORTED_BURST_LENGTHS 16
	/* SDRAM device attributes, number of banks on SDRAM device */
	#define SPD_NUM_BANKS_PER_SDRAM 17
	/* SDRAM device attributes, CAS latency */
	#define SPD_ACCEPTABLE_CAS_LATENCIES 18
	/* SDRAM device attributes, CS latency */
	#define SPD_CS_LATENCY 19
	/* SDRAM device attributes, WE latency */
	#define SPD_WE_LATENCY 20
	#define SPD_MODULE_ATTRIBUTES 21 /* SDRAM module attributes */
	/* SDRAM device attributes, general */
	#define SPD_DEVICE_ATTRIBUTES_GENERAL 22
	/* SDRAM cycle time (2nd highest CAS latency) */
	#define SPD_SDRAM_CYCLE_TIME_2ND 23
	/* SDRAM access from clock (2nd highest CAS latency) */
	#define SPD_ACCESS_TIME_FROM_CLOCK_2ND 24
	/* SDRAM cycle time (3rd highest CAS latency) */
	#define SPD_SDRAM_CYCLE_TIME_3RD 25
	/* SDRAM access from clock (3rd highest CAS latency) */
	#define SPD_ACCESS_TIME_FROM_CLOCK_3RD 26
	/* Minimum row precharge time (Trp) */
	#define SPD_MIN_ROW_PRECHARGE_TIME 27
	/* Minimum row active to row active (Trrd) */
	#define SPD_MIN_ROWACTIVE_TO_ROWACTIVE 28
	/* Minimum RAS to CAS delay (Trcd) */
	#define SPD_MIN_RAS_TO_CAS_DELAY 29
	/* Minimum RAS pulse width (Tras) */
	#define SPD_MIN_ACTIVE_TO_PRECHARGE_DELAY 30
	/* Density of each row on module */
	#define SPD_DENSITY_OF_EACH_ROW_ON_MODULE 31
	/* Command and address signal input setup time */
	#define SPD_CMD_SIGNAL_INPUT_SETUP_TIME 32
	/* Command and address signal input hold time */
	#define SPD_CMD_SIGNAL_INPUT_HOLD_TIME 33
	/* Data signal input setup time */
	#define SPD_DATA_SIGNAL_INPUT_SETUP_TIME 34
	#define SPD_DATA_SIGNAL_INPUT_HOLD_TIME 35 /* Data signal input hold time */
	#define SPD_WRITE_RECOVERY_TIME 36 /* Write recovery time (tWR) */
	/* Internal write to read command delay (tWTR) */
	#define SPD_INT_WRITE_TO_READ_DELAY 37
	/* Internal read to precharge command delay (tRTP) */
	#define SPD_INT_READ_TO_PRECHARGE_DELAY 38
	/* Memory analysis probe characteristics */
	#define SPD_MEM_ANALYSIS_PROBE_PARAMS 39
	/* Extension of byte 41 (tRC) and byte 42 (tRFC) */
	#define SPD_BYTE_41_42_EXTENSION 40
	/* Minimum active to active auto refresh (tRCmin) */
	#define SPD_MIN_ACT_TO_ACT_AUTO_REFRESH 41
	/* Minimum auto refresh to active/auto refresh (tRFC) */
	#define SPD_MIN_AUTO_REFRESH_TO_ACT 42
	/* Maximum device cycle time (tCKmax) */
	#define SPD_MAX_DEVICE_CYCLE_TIME 43
	/* Maximum skew between DQS and DQ (tDQSQ) */
	#define SPD_MAX_DQS_DQ_SKEW 44
	/* Maximum read data-hold skew factor (tQHS) */
	#define SPD_MAX_READ_DATAHOLD_SKEW 45
	#define SPD_PLL_RELOCK_TIME 46 /* PLL relock time */
	#define SPD_SPD_DATA_REVISION_CODE 62 /* SPD data revision code */
	#define SPD_CHECKSUM_FOR_BYTES_0_TO_62 63 /* Checksum for bytes 0-62 */
	/* Manufacturer's JEDEC ID code, per EIA/JEP106 (bytes 64-71) */
	#define SPD_MANUFACTURER_JEDEC_ID_CODE 64
	#define SPD_MANUFACTURING_LOCATION 72 /* Manufacturing location */
	/* Manufacturer's part number, in 6-bit ASCII (bytes 73-90) */
	#define SPD_MANUFACTURER_PART_NUMBER 73
	#define SPD_REVISION_CODE 91 /* Revision code (bytes 91-92) */
	/* Manufacturing date (byte 93: year, byte 94: week) */
	#define SPD_MANUFACTURING_DATE 93
	/* Assembly serial number (bytes 95-98) */
	#define SPD_ASSEMBLY_SERIAL_NUMBER 95
	/* Manufacturer specific data (bytes 99-125) */
	#define SPD_MANUFACTURER_SPECIFIC_DATA 99
	/* Intel specification for frequency */
	#define SPD_INTEL_SPEC_FOR_FREQUENCY 126
	/* Intel specification details for 100MHz support */
	#define SPD_INTEL_SPEC_100_MHZ 127

	/* DRAM specifications use the following naming conventions for SPD locations */
	#define SPD_tRP SPD_MIN_ROW_PRECHARGE_TIME
	#define SPD_tRRD SPD_MIN_ROWACTIVE_TO_ROWACTIVE
	#define SPD_tRCD SPD_MIN_RAS_TO_CAS_DELAY
	#define SPD_tRAS SPD_MIN_ACTIVE_TO_PRECHARGE_DELAY
	#define SPD_BANK_DENSITY SPD_DENSITY_OF_EACH_ROW_ON_MODULE
	#define SPD_ADDRESS_CMD_HOLD SPD_CMD_SIGNAL_INPUT_HOLD_TIME
	/* SDRAM Device Minimum Active to Active/Auto Refresh Time (tRC) */
	#define SPD_tRC 41
	/* SDRAM Device Minimum Auto Refresh to Active/Auto Refresh (tRFC) */
	#define SPD_tRFC 42

	/* SPD_MEMORY_TYPE values. */
	enum spd_memory_type {
	SPD_MEMORY_TYPE_UNDEFINED = 0x00,
	SPD_MEMORY_TYPE_FPM_DRAM = 0x01,
	SPD_MEMORY_TYPE_EDO = 0x02,
	SPD_MEMORY_TYPE_PIPELINED_NIBBLE = 0x03,
	SPD_MEMORY_TYPE_SDRAM = 0x04,
	SPD_MEMORY_TYPE_MULTIPLEXED_ROM = 0x05,
	SPD_MEMORY_TYPE_SGRAM_DDR = 0x06,
	SPD_MEMORY_TYPE_SDRAM_DDR = 0x07,
	SPD_MEMORY_TYPE_SDRAM_DDR2 = 0x08,
	SPD_MEMORY_TYPE_FBDIMM_DDR2 = 0x09,
	SPD_MEMORY_TYPE_FB_PROBE_DDR2 = 0x0a,
	SPD_MEMORY_TYPE_SDRAM_DDR3 = 0x0b,
	SPD_MEMORY_TYPE_DDR4_SDRAM = 0x0c,
	SPD_MEMORY_TYPE_DDR4E_SDRAM = 0x0e,
	SPD_MEMORY_TYPE_LPDDR3_SDRAM = 0x0f,
	SPD_MEMORY_TYPE_LPDDR4_SDRAM = 0x10,
	};

	/* SPD_MODULE_VOLTAGE values. */
	#define SPD_VOLTAGE_TTL 0 /* 5.0 Volt/TTL */
	#define SPD_VOLTAGE_LVTTL 1 /* LVTTL */
	#define SPD_VOLTAGE_HSTL 2 /* HSTL 1.5 */
	#define SPD_VOLTAGE_SSTL3 3 /* SSTL 3.3 */
	#define SPD_VOLTAGE_SSTL2 4 /* SSTL 2.5 */
	#define SPD_VOLTAGE_SSTL1 5 /* SSTL 1.8 */

	/* SPD_DIMM_CONFIG_TYPE values. */
	#define ERROR_SCHEME_NONE 0
	#define ERROR_SCHEME_PARITY 1
	#define ERROR_SCHEME_ECC 2

	/* SPD_ACCEPTABLE_CAS_LATENCIES values. */
	// TODO: Check values.
	#define SPD_CAS_LATENCY_1_0 0x01
	#define SPD_CAS_LATENCY_1_5 0x02
	#define SPD_CAS_LATENCY_2_0 0x04
	#define SPD_CAS_LATENCY_2_5 0x08
	#define SPD_CAS_LATENCY_3_0 0x10
	#define SPD_CAS_LATENCY_3_5 0x20
	#define SPD_CAS_LATENCY_4_0 0x40

	#define SPD_CAS_LATENCY_DDR2_2 (1 << 2)
	#define SPD_CAS_LATENCY_DDR2_3 (1 << 3)
	#define SPD_CAS_LATENCY_DDR2_4 (1 << 4)
	#define SPD_CAS_LATENCY_DDR2_5 (1 << 5)
	#define SPD_CAS_LATENCY_DDR2_6 (1 << 6)
	#define SPD_CAS_LATENCY_DDR2_7 (1 << 7)

	/* SPD_SUPPORTED_BURST_LENGTHS values. */
	#define SPD_BURST_LENGTH_1 1
	#define SPD_BURST_LENGTH_2 2
	#define SPD_BURST_LENGTH_4 4
	#define SPD_BURST_LENGTH_8 8
	#define SPD_BURST_LENGTH_PAGE (1 << 7)

	/* SPD_MODULE_ATTRIBUTES values. */
	#define MODULE_BUFFERED 1
	#define MODULE_REGISTERED 2

	/* DIMM SPD addresses */
	#define DIMM0 0x50
	#define DIMM1 0x51
	#define DIMM2 0x52
	#define DIMM3 0x53
	#define DIMM4 0x54
	#define DIMM5 0x55
	#define DIMM6 0x56
	#define DIMM7 0x57

	#define RC00 0
	#define RC01 1
	#define RC02 2
	#define RC03 3
	#define RC04 4
	#define RC05 5
	#define RC06 6
	#define RC07 7
	#define RC08 8
	#define RC09 9
	#define RC10 10
	#define RC11 11
	#define RC12 12
	#define RC13 13
	#define RC14 14
	#define RC15 15
	#define RC16 16
	#define RC17 17
	#define RC18 18
	#define RC19 19
	#define RC20 20
	#define RC21 21
	#define RC22 22
	#define RC23 23
	#define RC24 24
	#define RC25 25
	#define RC26 26
	#define RC27 27
	#define RC28 28
	#define RC29 29
	#define RC30 30
	#define RC31 31

	#define RC32 32
	#define RC33 33
	#define RC34 34
	#define RC35 35
	#define RC36 36
	#define RC37 37
	#define RC38 38
	#define RC39 39
	#define RC40 40
	#define RC41 41
	#define RC42 42
	#define RC43 43
	#define RC44 44
	#define RC45 45
	#define RC46 46
	#define RC47 47
	#define RC48 48
	#define RC49 49
	#define RC50 50
	#define RC51 51
	#define RC52 52
	#define RC53 53
	#define RC54 54
	#define RC55 55
	#define RC56 56
	#define RC57 57
	#define RC58 58
	#define RC59 59
	#define RC60 60
	#define RC61 61
	#define RC62 62
	#define RC63 63

	/* Byte 3: Module type information */
	#define SPD_UNDEFINED 0x00
	#define SPD_RDIMM 0x01
	#define SPD_UDIMM 0x02
	#define SPD_SODIMM 0x04
	#define SPD_72B_SO_CDIMM 0x06
	#define SPD_72B_SO_RDIMM 0x07
	#define SPD_MICRO_DIMM 0x08
	#define SPD_MINI_RDIMM 0x10
	#define SPD_MINI_UDIMM 0x20

	#define SPD_ECC_8BIT (1<<3)

	#endif