src/southbridge/intel/bd82x6x/bootblock.c

/*
 * This file is part of the coreboot project.
 *
 * Copyright (C) 2011 Google Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; version 2 of the License.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <arch/io.h>
#include <cpu/x86/tsc.h>
#include "pch.h"

static void store_initial_timestamp(void)
{
	/* On Cougar Point we have two 32bit scratchpad registers available:
	 * D0:F0  0xdc (SKPAD)
	 * D31:F2 0xd0 (SATA SP)
	 */
	tsc_t tsc = rdtsc();
	pci_write_config32(PCI_DEV(0, 0x00, 0), 0xdc, tsc.lo);
	pci_write_config32(PCI_DEV(0, 0x1f, 2), 0xd0, tsc.hi);
}

/*
 * Enable Prefetching and Caching.
 */
static void enable_spi_prefetch(void)
{
	u8 reg8;
	pci_devfn_t dev = PCH_LPC_DEV;

	reg8 = pci_read_config8(dev, BIOS_CNTL);
	reg8 &= ~(3 << 2);
	reg8 |= (2 << 2); /* Prefetching and Caching Enabled */
	pci_write_config8(dev, BIOS_CNTL, reg8);
}

static void enable_port80_on_lpc(void)
{
	pci_devfn_t dev = PCH_LPC_DEV;

	/* Enable port 80 POST on LPC */
	pci_write_config32(dev, RCBA, (uintptr_t)DEFAULT_RCBA | 1);
#if 0
	RCBA32(GCS) &= (~0x04);
#else
	volatile u32 *gcs = (volatile u32 *)(DEFAULT_RCBA + GCS);
	u32 reg32 = *gcs;
	reg32 = reg32 & ~0x04;
	*gcs = reg32;
#endif
}

static void set_spi_speed(void)
{
	u32 fdod;
	u8 ssfc;

	/* Observe SPI Descriptor Component Section 0 */
	RCBA32(0x38b0) = 0x1000;

	/* Extract the Write/Erase SPI Frequency from descriptor */
	fdod = RCBA32(0x38b4);
	fdod >>= 24;
	fdod &= 7;

	/* Set Software Sequence frequency to match */
	ssfc = RCBA8(0x3893);
	ssfc &= ~7;
	ssfc |= fdod;
	RCBA8(0x3893) = ssfc;
}

static void bootblock_southbridge_init(void)
{
	store_initial_timestamp();

	enable_spi_prefetch();
	enable_port80_on_lpc();
	set_spi_speed();

	/* Enable upper 128bytes of CMOS */
	RCBA32(RC) = (1 << 2);
}