blob: fa00ba9c182ddad88a8680544327f3028d6973cc [file] [log] [blame]
#
# This file is part of the coreboot project.
#
# Copyright (C) 2009 coresystems GmbH
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; version 2 of the License.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
#
bootblock-y += cbfs.c
ifneq ($(CONFIG_HAVE_ARCH_MEMSET),y)
bootblock-y += memset.c
endif
bootblock-y += memchr.c
ifneq ($(CONFIG_HAVE_ARCH_MEMCPY),y)
bootblock-y += memcpy.c
endif
bootblock-y += memcmp.c
ifneq ($(CONFIG_HAVE_ARCH_MEMMOVE),y)
bootblock-y += memmove.c
endif
ifneq ($(CONFIG_HAVE_ARCH_MEMSET),y)
romstage-y += memset.c
rmodules-y += memset.c
endif
romstage-y += memchr.c
ifneq ($(CONFIG_HAVE_ARCH_MEMCPY),y)
romstage-y += memcpy.c
rmodules-y += memcpy.c
endif
romstage-y += memcmp.c
rmodules-y += memcmp.c
romstage-y += delay.c
romstage-y += cbfs.c
romstage-y += lzma.c
#romstage-y += lzmadecode.c
romstage-$(CONFIG_CACHE_AS_RAM) += ramtest.c
romstage-$(CONFIG_CONSOLE_SERIAL8250) += uart8250.c
romstage-$(CONFIG_CONSOLE_SERIAL8250MEM) += uart8250mem.c
romstage-$(CONFIG_CONSOLE_CBMEM) += cbmem_console.c
romstage-$(CONFIG_CONSOLE_NE2K) += ne2k.c
romstage-$(CONFIG_USBDEBUG) += usbdebug.c
romstage-$(CONFIG_COLLECT_TIMESTAMPS) += timestamp.c
romstage-$(CONFIG_EARLY_CBMEM_INIT) += cbmem.c
romstage-y += compute_ip_checksum.c
ifneq ($(CONFIG_HAVE_ARCH_MEMMOVE),y)
romstage-y += memmove.c
endif
romstage-$(CONFIG_ARCH_X86) += gcc.c
ramstage-y += hardwaremain.c
ramstage-y += selfboot.c
ramstage-y += coreboot_table.c
ifneq ($(CONFIG_HAVE_ARCH_MEMSET),y)
ramstage-y += memset.c
endif
ramstage-y += memchr.c
ifneq ($(CONFIG_HAVE_ARCH_MEMCPY),y)
ramstage-y += memcpy.c
endif
ramstage-y += memcmp.c
ifneq ($(CONFIG_HAVE_ARCH_MEMMOVE),y)
ramstage-y += memmove.c
endif
ramstage-y += malloc.c
smm-$(CONFIG_SMM_TSEG) += malloc.c
ramstage-y += delay.c
ramstage-y += fallback_boot.c
ramstage-y += compute_ip_checksum.c
ramstage-y += version.c
ramstage-y += cbfs.c
ramstage-y += lzma.c
#ramstage-y += lzmadecode.c
ramstage-y += stack.c
ramstage-$(CONFIG_ARCH_X86) += gcc.c
ramstage-y += clog2.c
ramstage-$(CONFIG_CONSOLE_SERIAL8250) += uart8250.c
ramstage-$(CONFIG_CONSOLE_SERIAL8250MEM) += uart8250mem.c
ramstage-$(CONFIG_CONSOLE_CBMEM) += cbmem_console.c
ramstage-$(CONFIG_USBDEBUG) += usbdebug.c
ramstage-$(CONFIG_BOOTSPLASH) += jpeg.c
ramstage-$(CONFIG_TRACE) += trace.c
ramstage-$(CONFIG_COLLECT_TIMESTAMPS) += timestamp.c
ramstage-$(CONFIG_COVERAGE) += libgcov.c
ramstage-$(CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT) += edid.c
ramstage-y += memrange.c
ramstage-$(CONFIG_COOP_MULTITASKING) += thread.c
ramstage-$(CONFIG_TIMER_QUEUE) += timer_queue.c
# The CBMEM implementations are chosen based on CONFIG_DYNAMIC_CBMEM.
ifeq ($(CONFIG_DYNAMIC_CBMEM),y)
ramstage-y += dynamic_cbmem.c
romstage-y += dynamic_cbmem.c
else
ramstage-y += cbmem.c
romstage-$(CONFIG_HAVE_ACPI_RESUME) += cbmem.c
endif # CONFIG_DYNAMIC_CBMEM
ramstage-y += cbmem_info.c
ramstage-y += hexdump.c
romstage-y += hexdump.c
ramstage-$(CONFIG_REG_SCRIPT) += reg_script.c
romstage-$(CONFIG_REG_SCRIPT) += reg_script.c
ramstage-$(CONFIG_CONSOLE_NE2K) += ne2k.c
romstage-$(CONFIG_CACHE_RELOCATED_RAMSTAGE_OUTSIDE_CBMEM) += ramstage_cache.c
ifneq ($(CONFIG_HAVE_ARCH_MEMSET),y)
smm-y += memset.c
endif
ifneq ($(CONFIG_HAVE_ARCH_MEMCPY),y)
smm-y += memcpy.c
endif
ifneq ($(CONFIG_HAVE_ARCH_MEMMOVE),y)
smm-y += memmove.c
endif
smm-y += cbfs.c memcmp.c
smm-$(CONFIG_CONSOLE_SERIAL8250) += uart8250.c
smm-$(CONFIG_CONSOLE_SERIAL8250MEM) += uart8250mem.c
smm-$(CONFIG_USBDEBUG) += usbdebug.c
smm-y += gcc.c
$(obj)/lib/version.ramstage.o : $(obj)/build.h
OPTION_TABLE_H:=
ifeq ($(CONFIG_HAVE_OPTION_TABLE),y)
OPTION_TABLE_H:=$(obj)/option_table.h
endif
$(obj)/lib/uart8250mem.smm.o : $(OPTION_TABLE_H)
$(obj)/lib/uart8250.smm.o : $(OPTION_TABLE_H)
ifeq ($(CONFIG_RELOCATABLE_MODULES),y)
ramstage-y += rmodule.c
romstage-$(CONFIG_RELOCATABLE_RAMSTAGE) += rmodule.c
RMODULE_LDSCRIPT := $(src)/lib/rmodule.ld
ifeq ($(CONFIG_COMPILER_LLVM_CLANG),y)
RMODULE_LDFLAGS := -nostartfiles -shared -z defs -nostdlib -Bsymbolic -T $(RMODULE_LDSCRIPT)
# rmodule_link_rules is a function that should be called with:
# (1) the object name to link
# (2) the dependencies
# (3) heap size of the relocatable module
# It will create the necessary Make rules.
define rmodule_link
$(strip $(1)): $(strip $(2)) $$(RMODULE_LDSCRIPT) $$(obj)/ldoptions
$$(LD) $$(RMODULE_LDFLAGS) --defsym=__heap_size=$(strip $(3)) -o $$@ --start-group $(strip $(2)) $$(LIBGCC_FILE_NAME) --end-group
$$(NM) -n $$@ > $$(basename $$@).map
endef
else
RMODULE_LDFLAGS := -nostartfiles -shared -Wl,-z,defs -Wl,-Bsymbolic -Wl,-T,$(RMODULE_LDSCRIPT)
# rmodule_link_rules is a function that should be called with:
# (1) the object name to link
# (2) the dependencies
# (3) heap size of the relocatable module
# It will create the necessary Make rules.
define rmodule_link
$(strip $(1)): $(strip $(2)) $$(RMODULE_LDSCRIPT) $$(obj)/ldoptions
$$(CC) $$(CFLAGS) $$(RMODULE_LDFLAGS) -Wl,--defsym=__heap_size=$(strip $(3)) -o $$@ -Wl,--start-group $(strip $(2)) $$(LIBGCC_FILE_NAME) -Wl,--end-group
$$(NM) -n $$@ > $$(basename $$@).map
endef
endif
endif