src/northbridge/intel/fsp_sandybridge/raminit.c

/*
 * This file is part of the coreboot project.
 *
 * Copyright (C) 2011 Google Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; version 2 of the License.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <console/console.h>
#include <string.h>
#include <arch/io.h>
#include <cbmem.h>
#include <device/pci_def.h>
#include "raminit.h"
#include "northbridge.h"

static const char* ecc_decoder[] = {
	"inactive",
	"active on IO",
	"disabled on IO",
	"active"
};

/*
 * Dump in the log memory controller configuration as read from the memory
 * controller registers.
 */
void report_memory_config(void)
{
	u32 addr_decoder_common, addr_decode_ch[2];
	int i;

	addr_decoder_common = MCHBAR32(0x5000);
	addr_decode_ch[0] = MCHBAR32(0x5004);
	addr_decode_ch[1] = MCHBAR32(0x5008);

	printk(BIOS_DEBUG, "memcfg DDR3 clock %d MHz\n",
	       (MCHBAR32(0x5e04) * 13333 * 2 + 50)/100);
	printk(BIOS_DEBUG, "memcfg channel assignment: A: %d, B % d, C % d\n",
	       addr_decoder_common & 3,
	       (addr_decoder_common >> 2) & 3,
	       (addr_decoder_common >> 4) & 3);

	for (i = 0; i < ARRAY_SIZE(addr_decode_ch); i++) {
		u32 ch_conf = addr_decode_ch[i];
		printk(BIOS_DEBUG, "memcfg channel[%d] config (%8.8x):\n",
		       i, ch_conf);
		printk(BIOS_DEBUG, "   ECC %s\n",
		       ecc_decoder[(ch_conf >> 24) & 3]);
		printk(BIOS_DEBUG, "   enhanced interleave mode %s\n",
		       ((ch_conf >> 22) & 1) ? "on" : "off");
		printk(BIOS_DEBUG, "   rank interleave %s\n",
		       ((ch_conf >> 21) & 1) ? "on" : "off");
		printk(BIOS_DEBUG, "   DIMMA %d MB width x%d %s rank%s\n",
		       ((ch_conf >> 0) & 0xff) * 256,
		       ((ch_conf >> 19) & 1) ? 16 : 8,
		       ((ch_conf >> 17) & 1) ? "dual" : "single",
		       ((ch_conf >> 16) & 1) ? "" : ", selected");
		printk(BIOS_DEBUG, "   DIMMB %d MB width x%d %s rank%s\n",
		       ((ch_conf >> 8) & 0xff) * 256,
		       ((ch_conf >> 20) & 1) ? 16 : 8,
		       ((ch_conf >> 18) & 1) ? "dual" : "single",
		       ((ch_conf >> 16) & 1) ? ", selected" : "");
	}
}