| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright 2016 Google Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <baseboard/variants.h> |
| #include <gpio.h> |
| #include <soc/meminit.h> |
| #include <variant/gpio.h> |
| #include <fsp/api.h> |
| |
| const struct lpddr4_swizzle_cfg baseboard_lpddr4_swizzle = { |
| /* CH0_DQA[0:31] SoC pins -> U22 LPDDR4 module pins */ |
| .phys[LP4_PHYS_CH0A] = { |
| /* DQA[0:7] pins of LPDDR4 module. */ |
| .dqs[LP4_DQS0] = { 6, 7, 5, 4, 3, 1, 0, 2 }, |
| /* DQA[8:15] pins of LPDDR4 module. */ |
| .dqs[LP4_DQS1] = { 12, 10, 11, 13, 14, 8, 9, 15 }, |
| /* DQB[0:7] pins of LPDDR4 module with offset of 16. */ |
| .dqs[LP4_DQS2] = { 16, 22, 23, 20, 18, 17, 19, 21 }, |
| /* DQB[7:15] pins of LPDDR4 module with offset of 16. */ |
| .dqs[LP4_DQS3] = { 30, 28, 29, 25, 24, 26, 27, 31 }, |
| }, |
| .phys[LP4_PHYS_CH0B] = { |
| /* DQA[0:7] pins of LPDDR4 module. */ |
| .dqs[LP4_DQS0] = { 7, 3, 5, 2, 6, 0, 1, 4 }, |
| /* DQA[8:15] pins of LPDDR4 module. */ |
| .dqs[LP4_DQS1] = { 9, 14, 12, 13, 10, 11, 8, 15 }, |
| /* DQB[0:7] pins of LPDDR4 module with offset of 16. */ |
| .dqs[LP4_DQS2] = { 20, 22, 23, 16, 19, 17, 18, 21 }, |
| /* DQB[7:15] pins of LPDDR4 module with offset of 16. */ |
| .dqs[LP4_DQS3] = { 28, 24, 26, 27, 29, 30, 31, 25 }, |
| }, |
| .phys[LP4_PHYS_CH1A] = { |
| /* DQA[0:7] pins of LPDDR4 module. */ |
| .dqs[LP4_DQS0] = { 2, 1, 6, 7, 5, 4, 3, 0 }, |
| /* DQA[8:15] pins of LPDDR4 module. */ |
| .dqs[LP4_DQS1] = { 11, 10, 8, 9, 12, 15, 13, 14 }, |
| /* DQB[0:7] pins of LPDDR4 module with offset of 16. */ |
| .dqs[LP4_DQS2] = { 17, 23, 19, 16, 21, 22, 20, 18 }, |
| /* DQB[7:15] pins of LPDDR4 module with offset of 16. */ |
| .dqs[LP4_DQS3] = { 31, 29, 26, 25, 28, 27, 24, 30 }, |
| }, |
| .phys[LP4_PHYS_CH1B] = { |
| /* DQA[0:7] pins of LPDDR4 module. */ |
| .dqs[LP4_DQS0] = { 4, 3, 7, 5, 6, 1, 0, 2 }, |
| /* DQA[8:15] pins of LPDDR4 module. */ |
| .dqs[LP4_DQS1] = { 15, 9, 8, 11, 14, 13, 12, 10 }, |
| /* DQB[0:7] pins of LPDDR4 module with offset of 16. */ |
| .dqs[LP4_DQS2] = { 20, 23, 22, 21, 18, 19, 16, 17 }, |
| /* DQB[7:15] pins of LPDDR4 module with offset of 16. */ |
| .dqs[LP4_DQS3] = { 25, 28, 30, 31, 26, 27, 24, 29 }, |
| }, |
| }; |
| |
| /* |
| * The strings in the part_num field aren't necessarily the exact part |
| * numbers used in all the designs. The reason is that the mosys userland |
| * tool uses these strings for dumping more information. Different speed bins |
| * could change in future systems, but the strings still need to match. |
| */ |
| static const struct lpddr4_sku skus[] = { |
| /* |
| * K4F6E304HB-MG - both logical channels While the parts |
| * are listed at 16Gb there are 2 ranks per channel so indicate |
| * the deneisty as 8Gb per rank. |
| */ |
| [0] = { |
| .speed = LP4_SPEED_2400, |
| .ch0_rank_density = LP4_8Gb_DENSITY, |
| .ch1_rank_density = LP4_8Gb_DENSITY, |
| .ch0_dual_rank = 1, |
| .ch1_dual_rank = 1, |
| .part_num = "K4F6E304HB-MGCJ", |
| }, |
| /* K4F8E304HB-MG - both logical channels */ |
| [1] = { |
| .speed = LP4_SPEED_2400, |
| .ch0_rank_density = LP4_8Gb_DENSITY, |
| .ch1_rank_density = LP4_8Gb_DENSITY, |
| .part_num = "K4F8E304HB-MGCJ", |
| }, |
| /* |
| * MT53B512M32D2NP - both logical channels. While the parts |
| * are listed at 16Gb there are 2 ranks per channel so indicate |
| * the deneisty as 8Gb per rank. |
| */ |
| [2] = { |
| .speed = LP4_SPEED_2400, |
| .ch0_rank_density = LP4_8Gb_DENSITY, |
| .ch1_rank_density = LP4_8Gb_DENSITY, |
| .ch0_dual_rank = 1, |
| .ch1_dual_rank = 1, |
| .part_num = "MT53B512M32D2NP", |
| }, |
| /* MT53B256M32D1NP - both logical channels */ |
| [3] = { |
| .speed = LP4_SPEED_2400, |
| .ch0_rank_density = LP4_8Gb_DENSITY, |
| .ch1_rank_density = LP4_8Gb_DENSITY, |
| .part_num = "MT53B256M32D1NP", |
| }, |
| /* |
| * H9HCNNNBPUMLHR - both logical channels. While the parts |
| * are listed at 16Gb there are 2 ranks per channel so indicate the |
| * density as 8Gb per rank. |
| */ |
| [4] = { |
| .speed = LP4_SPEED_2400, |
| .ch0_rank_density = LP4_8Gb_DENSITY, |
| .ch1_rank_density = LP4_8Gb_DENSITY, |
| .ch0_dual_rank = 1, |
| .ch1_dual_rank = 1, |
| .part_num = "H9HCNNNBPUMLHR", |
| }, |
| /* H9HCNNN8KUMLHR - both logical channels */ |
| [5] = { |
| .speed = LP4_SPEED_2400, |
| .ch0_rank_density = LP4_8Gb_DENSITY, |
| .ch1_rank_density = LP4_8Gb_DENSITY, |
| .part_num = "H9HCNNN8KUMLHR", |
| }, |
| /* MT53E512M32D2NP - both logical channels */ |
| [6] = { |
| .speed = LP4_SPEED_2400, |
| .ch0_rank_density = LP4_16Gb_DENSITY, |
| .ch1_rank_density = LP4_16Gb_DENSITY, |
| .part_num = "MT53E512M32D2NP", |
| }, |
| /* K4F6E3S4HM-MGCJ - both logical channels */ |
| [7] = { |
| .speed = LP4_SPEED_2400, |
| .ch0_rank_density = LP4_16Gb_DENSITY, |
| .ch1_rank_density = LP4_16Gb_DENSITY, |
| .part_num = "K4F6E3S4HM-MGCJ", |
| }, |
| /* K4F8E3S4HD-MGCL - both logical channels */ |
| [8] = { |
| .speed = LP4_SPEED_2400, |
| .ch0_rank_density = LP4_8Gb_DENSITY, |
| .ch1_rank_density = LP4_8Gb_DENSITY, |
| .part_num = "K4F8E3S4HD-MGCL", |
| }, |
| /* NT6AN256T32AV-J2 - both logical channels */ |
| [9] = { |
| .speed = LP4_SPEED_2400, |
| .ch0_rank_density = LP4_8Gb_DENSITY, |
| .ch1_rank_density = LP4_8Gb_DENSITY, |
| .part_num = "NT6AN256T32AV-J2", |
| }, |
| }; |
| |
| static const struct lpddr4_cfg lp4cfg = { |
| .skus = skus, |
| .num_skus = ARRAY_SIZE(skus), |
| .swizzle_config = &baseboard_lpddr4_swizzle, |
| }; |
| |
| const struct lpddr4_cfg * __attribute__((weak)) variant_lpddr4_config(void) |
| { |
| return &lp4cfg; |
| } |
| |
| size_t __attribute__((weak)) variant_memory_sku(void) |
| { |
| gpio_t pads[] = { |
| [3] = MEM_CONFIG3, [2] = MEM_CONFIG2, |
| [1] = MEM_CONFIG1, [0] = MEM_CONFIG0, |
| }; |
| |
| /* Need internal pullups enabled as only pulldown stuffing options |
| * exist. */ |
| return gpio_pullup_base2_value(pads, ARRAY_SIZE(pads)); |
| } |
| |
| uint8_t fsp_memory_mainboard_version(void) |
| { |
| return 1; |
| } |