mb/google/dedede/var/bugzzy: Update device tree
Update bugzzy device tree override based on the EVT schematics.
BUG=b:195215785
BRANCH=dedede
TEST=emerge-dedede coreboot
Change-Id: Ie7e836d6921e4c3faa171bf6807c34ecd20d191b
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57703
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
GitOrigin-RevId: c543a81736723e35eb9bfcb66eaa59f64fe3db8e
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/3215291
Tested-by: Copybara Service <copybara-worker-blackhole@google.com>
Reviewed-by: Edward Doan <edoan@chromium.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Commit-Queue: Rob Barnes <robbarnes@google.com>
diff --git a/src/mainboard/google/dedede/variants/bugzzy/overridetree.cb b/src/mainboard/google/dedede/variants/bugzzy/overridetree.cb
index 906bdf7..92a0497 100644
--- a/src/mainboard/google/dedede/variants/bugzzy/overridetree.cb
+++ b/src/mainboard/google/dedede/variants/bugzzy/overridetree.cb
@@ -2,6 +2,11 @@
# MIPI display panel
register "DdiPortAConfig" = "2" # DdiPortMipiDsi
+ # Disable PCIe Root Port 8 (index 7)
+ register "PcieRpEnable[7]" = "0"
+ # Disable PCIe Clock Source 4 (index 3)
+ register "PcieClkSrcUsage[3]" = "0xff"
+
# USB Port Configuration
register "usb2_ports[0]" = "{
.enable = 1,
@@ -31,7 +36,6 @@
register "usb2_ports[4]" = "USB2_PORT_EMPTY"
register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # Camera
-
# Intel Common SoC Config
#+-------------------+---------------------------+
#| Field | Value |
@@ -54,9 +58,8 @@
},
.i2c[0] = {
.speed = I2C_SPEED_FAST,
- .rise_time_ns = 66,
- .fall_time_ns = 90,
- .data_hold_time_ns = 350,
+ .rise_time_ns = 209,
+ .fall_time_ns = 12,
},
.i2c[1] = {
.speed = I2C_SPEED_FAST,
@@ -69,12 +72,70 @@
},
.i2c[4] = {
.speed = I2C_SPEED_FAST,
- .speed_config[0] = {
- .speed = I2C_SPEED_FAST,
- }
+ .rise_time_ns = 175,
+ .fall_time_ns = 8,
},
}"
device domain 0 on
+ device pci 04.0 on
+ chip drivers/intel/dptf
+ register "options.tsr[0].desc" = ""Memory""
+ register "options.tsr[1].desc" = ""CPU""
+ register "options.tsr[2].desc" = ""Charger""
+ register "options.tsr[3].desc" = ""LTE""
+ register "policies.passive" = "{
+ [0] = DPTF_PASSIVE(CPU, CPU, 90, 10000),
+ [1] = DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 100, 60000),
+ [2] = DPTF_PASSIVE(CPU, TEMP_SENSOR_1, 100, 15000),
+ [3] = DPTF_PASSIVE(CHARGER, TEMP_SENSOR_2, 60, 15000),
+ [4] = DPTF_PASSIVE(CPU, TEMP_SENSOR_3, 100, 15000),
+ }"
+ register "policies.critical" = "{
+ [0] = DPTF_CRITICAL(CPU, 105, SHUTDOWN),
+ [1] = DPTF_CRITICAL(TEMP_SENSOR_0, 100, SHUTDOWN),
+ [2] = DPTF_CRITICAL(TEMP_SENSOR_1, 100, SHUTDOWN),
+ [3] = DPTF_CRITICAL(TEMP_SENSOR_2, 100, SHUTDOWN),
+ [4] = DPTF_CRITICAL(TEMP_SENSOR_3, 100, SHUTDOWN),
+ }"
+ register "controls.power_limits" = "{
+ .pl1 = {
+ .min_power = 6000,
+ .max_power = 6000,
+ .time_window_min = 1 * MSECS_PER_SEC,
+ .time_window_max = 1 * MSECS_PER_SEC,
+ .granularity = 200,
+ },
+ .pl2 = {
+ .min_power = 20000,
+ .max_power = 20000,
+ .time_window_min = 1 * MSECS_PER_SEC,
+ .time_window_max = 1 * MSECS_PER_SEC,
+ .granularity = 1000,
+ }
+ }"
+ register "controls.charger_perf" = "{
+ [0] = { 55, 3500 },
+ [1] = { 47, 3000 },
+ [2] = { 39, 2500 },
+ [3] = { 31, 2000 },
+ }"
+ device generic 0 on end
+ end
+ end # SA Thermal device
+ device pci 05.0 on # IPU - MIPI Camera
+ chip drivers/intel/mipi_camera
+ register "acpi_uid" = "0x50000"
+ register "acpi_name" = ""IPU0""
+ register "device_type" = "INTEL_ACPI_CAMERA_CIO2"
+
+ register "cio2_num_ports" = "2"
+ register "cio2_lanes_used" = "{1,4}"
+ register "cio2_lane_endpoint[1]" = ""^I2C3.CAM1""
+ register "cio2_prt[0]" = "0"
+ register "cio2_prt[1]" = "2"
+ device generic 0 on end
+ end
+ end
device pci 14.0 on
chip drivers/usb/acpi
device usb 0.0 on
@@ -99,10 +160,149 @@
end
end
end # USB xHCI
- device pci 15.0 on end
- device pci 15.2 on end
- device pci 1c.7 on end
- device pci 19.0 on end
- device pci 1f.3 on end
+ device pci 15.0 on
+ chip drivers/i2c/generic
+ register "hid" = ""ELAN0000""
+ register "desc" = ""ELAN Touchpad""
+ register "irq" = "ACPI_IRQ_WAKE_EDGE_LOW(GPP_B3_IRQ)"
+ register "wake" = "GPE0_DW0_03"
+ register "probed" = "1"
+ device i2c 15 on end
+ end
+ chip drivers/i2c/hid
+ register "generic.hid" = ""ZNT0000""
+ register "generic.desc" = ""Zinitix Touchpad""
+ register "generic.irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_B3_IRQ)"
+ register "generic.wake" = "GPE0_DW0_03"
+ register "generic.probed" = "1"
+ register "hid_desc_reg_offset" = "0xE"
+ device i2c 40 on end
+ end
+ end # I2C 0
+ device pci 15.1 on
+ chip drivers/i2c/hid
+ register "generic.hid" = ""WCOM014B""
+ register "generic.desc" = ""WCOM Digitizer""
+ register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D7_IRQ)"
+ register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)"
+ register "generic.enable_delay_ms" = "20"
+ register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_E1)"
+ register "generic.reset_delay_ms" = "100"
+ register "generic.has_power_resource" = "1"
+ register "hid_desc_reg_offset" = "0x1"
+ device i2c 0x09 on end
+ end
+ end # I2C #1
+ device pci 15.2 on
+ chip drivers/i2c/hid
+ register "generic.hid" = ""HX121A""
+ register "generic.desc" = ""HX Touchscreen""
+ register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D4_IRQ)"
+ register "generic.probed" = "1"
+ register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D5)"
+ register "generic.reset_delay_ms" = "120"
+ register "generic.reset_off_delay_ms" = "2"
+ register "generic.has_power_resource" = "1"
+ register "hid_desc_reg_offset" = "0x1"
+ device i2c 0x4F on end
+ end
+ end # I2C #2
+ device pci 15.3 on
+ chip drivers/intel/mipi_camera
+ register "acpi_hid" = ""OVTI8856""
+ register "acpi_uid" = "0"
+ register "acpi_name" = ""CAM1""
+ register "chip_name" = ""Ov 8856 Camera""
+ register "device_type" = "INTEL_ACPI_CAMERA_SENSOR"
+
+ register "ssdb.lanes_used" = "4"
+ register "ssdb.link_used" = "1"
+ register "ssdb.vcm_type" = "0x0C"
+ register "vcm_name" = ""VCM0""
+ register "num_freq_entries" = "2"
+ register "link_freq[0]" = "360000000"
+ register "link_freq[1]" = "180000000"
+ register "remote_name" = ""IPU0""
+
+ register "has_power_resource" = "1"
+ #Controls
+ register "clk_panel.clks[0].clknum" = "1" #IMGCLKOUT_1
+ register "clk_panel.clks[0].freq" = "1" #19.2 Mhz
+
+ register "gpio_panel.gpio[0].gpio_num" = "GPP_D15" #power_enable_2p8
+ register "gpio_panel.gpio[1].gpio_num" = "GPP_D14" #power_enable_1p2
+ register "gpio_panel.gpio[2].gpio_num" = "GPP_D12" #reset
+
+ #_ON
+ register "on_seq.ops_cnt" = "5"
+ register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)"
+ register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)"
+ register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 5)"
+ register "on_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(2, 5)"
+ register "on_seq.ops[4]" = "SEQ_OPS_GPIO_ENABLE(2, 5)"
+
+ #_OFF
+ register "off_seq.ops_cnt" = "4"
+ register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)"
+ register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(2, 0)"
+ register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 0)"
+ register "off_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"
+
+ device i2c 36 on end
+ end
+ chip drivers/intel/mipi_camera
+ register "acpi_hid" = "ACPI_DT_NAMESPACE_HID"
+ register "acpi_uid" = "3"
+ register "acpi_name" = ""VCM0""
+ register "chip_name" = ""DW AF DAC""
+ register "device_type" = "INTEL_ACPI_CAMERA_VCM"
+
+ register "pr0" = ""\\_SB.PCI0.I2C3.CAM1.PRIC""
+ register "vcm_compat" = ""dongwoon,dw9714""
+
+ device i2c 0C on end
+ end
+ chip drivers/intel/mipi_camera
+ register "acpi_uid" = "1"
+ register "acpi_name" = ""NVM0""
+ register "chip_name" = ""GT24C08""
+ register "device_type" = "INTEL_ACPI_CAMERA_NVM"
+
+ register "nvm_size" = "0x2000"
+ register "nvm_pagesize" = "1"
+ register "nvm_readonly" = "1"
+ register "nvm_width" = "0x10"
+ register "nvm_compat" = ""atmel,24c08""
+
+ device i2c 50 on end
+ end
+ end # I2C 3
+ device pci 1c.7 off end # PCI Express Root Port 8
+ device pci 19.0 on
+ chip drivers/i2c/da7219
+ register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_D16)"
+ register "btn_cfg" = "50"
+ register "mic_det_thr" = "500"
+ register "jack_ins_deb" = "20"
+ register "jack_det_rate" = ""32ms_64ms""
+ register "jack_rem_deb" = "1"
+ register "a_d_btn_thr" = "0xa"
+ register "d_b_btn_thr" = "0x16"
+ register "b_c_btn_thr" = "0x21"
+ register "c_mic_btn_thr" = "0x3e"
+ register "btn_avg" = "4"
+ register "adc_1bit_rpt" = "1"
+ register "micbias_lvl" = "2600"
+ register "mic_amp_in_sel" = ""diff""
+ device i2c 1a on end
+ end
+ end #I2C 4
+ device pci 1f.3 on
+ chip drivers/generic/max98357a
+ register "hid" = ""MX98360A""
+ register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D17)"
+ device generic 0 on end
+ end
+ end # Intel HDA
end
end
