blob: c89ae1863666f307a7fa8ad032ee8e77ad2a96db [file] [log] [blame]
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2008-2009 coresystems GmbH
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; version 2 of
* the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
* MA 02110-1301 USA
*/
#include <device/device.h>
#include <device/pci.h>
#include <console/console.h>
#include <arch/io.h>
#include <cpu/cpu.h>
#include <cpu/x86/cache.h>
#include <cpu/x86/smm.h>
#include <string.h>
#include "pch.h"
#if CONFIG_NORTHBRIDGE_INTEL_SANDYBRIDGE || CONFIG_NORTHBRIDGE_INTEL_IVYBRIDGE
#include "northbridge/intel/sandybridge/sandybridge.h"
#endif
extern unsigned char _binary_smm_start;
extern unsigned char _binary_smm_size;
/* While we read PMBASE dynamically in case it changed, let's
* initialize it with a sane value
*/
static u16 pmbase = DEFAULT_PMBASE;
/**
* @brief read and clear PM1_STS
* @return PM1_STS register
*/
static u16 reset_pm1_status(void)
{
u16 reg16;
reg16 = inw(pmbase + PM1_STS);
/* set status bits are cleared by writing 1 to them */
outw(reg16, pmbase + PM1_STS);
return reg16;
}
static void dump_pm1_status(u16 pm1_sts)
{
printk(BIOS_DEBUG, "PM1_STS: ");
if (pm1_sts & (1 << 15)) printk(BIOS_DEBUG, "WAK ");
if (pm1_sts & (1 << 14)) printk(BIOS_DEBUG, "PCIEXPWAK ");
if (pm1_sts & (1 << 11)) printk(BIOS_DEBUG, "PRBTNOR ");
if (pm1_sts & (1 << 10)) printk(BIOS_DEBUG, "RTC ");
if (pm1_sts & (1 << 8)) printk(BIOS_DEBUG, "PWRBTN ");
if (pm1_sts & (1 << 5)) printk(BIOS_DEBUG, "GBL ");
if (pm1_sts & (1 << 4)) printk(BIOS_DEBUG, "BM ");
if (pm1_sts & (1 << 0)) printk(BIOS_DEBUG, "TMROF ");
printk(BIOS_DEBUG, "\n");
}
/**
* @brief read and clear SMI_STS
* @return SMI_STS register
*/
static u32 reset_smi_status(void)
{
u32 reg32;
reg32 = inl(pmbase + SMI_STS);
/* set status bits are cleared by writing 1 to them */
outl(reg32, pmbase + SMI_STS);
return reg32;
}
static void dump_smi_status(u32 smi_sts)
{
printk(BIOS_DEBUG, "SMI_STS: ");
if (smi_sts & (1 << 26)) printk(BIOS_DEBUG, "SPI ");
if (smi_sts & (1 << 25)) printk(BIOS_DEBUG, "EL_SMI ");
if (smi_sts & (1 << 21)) printk(BIOS_DEBUG, "MONITOR ");
if (smi_sts & (1 << 20)) printk(BIOS_DEBUG, "PCI_EXP_SMI ");
if (smi_sts & (1 << 18)) printk(BIOS_DEBUG, "INTEL_USB2 ");
if (smi_sts & (1 << 17)) printk(BIOS_DEBUG, "LEGACY_USB2 ");
if (smi_sts & (1 << 16)) printk(BIOS_DEBUG, "SMBUS_SMI ");
if (smi_sts & (1 << 15)) printk(BIOS_DEBUG, "SERIRQ_SMI ");
if (smi_sts & (1 << 14)) printk(BIOS_DEBUG, "PERIODIC ");
if (smi_sts & (1 << 13)) printk(BIOS_DEBUG, "TCO ");
if (smi_sts & (1 << 12)) printk(BIOS_DEBUG, "DEVMON ");
if (smi_sts & (1 << 11)) printk(BIOS_DEBUG, "MCSMI ");
if (smi_sts & (1 << 10)) printk(BIOS_DEBUG, "GPI ");
if (smi_sts & (1 << 9)) printk(BIOS_DEBUG, "GPE0 ");
if (smi_sts & (1 << 8)) printk(BIOS_DEBUG, "PM1 ");
if (smi_sts & (1 << 6)) printk(BIOS_DEBUG, "SWSMI_TMR ");
if (smi_sts & (1 << 5)) printk(BIOS_DEBUG, "APM ");
if (smi_sts & (1 << 4)) printk(BIOS_DEBUG, "SLP_SMI ");
if (smi_sts & (1 << 3)) printk(BIOS_DEBUG, "LEGACY_USB ");
if (smi_sts & (1 << 2)) printk(BIOS_DEBUG, "BIOS ");
printk(BIOS_DEBUG, "\n");
}
/**
* @brief read and clear GPE0_STS
* @return GPE0_STS register
*/
static u32 reset_gpe0_status(void)
{
u32 reg32;
reg32 = inl(pmbase + GPE0_STS);
/* set status bits are cleared by writing 1 to them */
outl(reg32, pmbase + GPE0_STS);
return reg32;
}
static void dump_gpe0_status(u32 gpe0_sts)
{
int i;
printk(BIOS_DEBUG, "GPE0_STS: ");
for (i=31; i<= 16; i--) {
if (gpe0_sts & (1 << i)) printk(BIOS_DEBUG, "GPIO%d ", (i-16));
}
if (gpe0_sts & (1 << 14)) printk(BIOS_DEBUG, "USB4 ");
if (gpe0_sts & (1 << 13)) printk(BIOS_DEBUG, "PME_B0 ");
if (gpe0_sts & (1 << 12)) printk(BIOS_DEBUG, "USB3 ");
if (gpe0_sts & (1 << 11)) printk(BIOS_DEBUG, "PME ");
if (gpe0_sts & (1 << 10)) printk(BIOS_DEBUG, "EL_SCI/BATLOW ");
if (gpe0_sts & (1 << 9)) printk(BIOS_DEBUG, "PCI_EXP ");
if (gpe0_sts & (1 << 8)) printk(BIOS_DEBUG, "RI ");
if (gpe0_sts & (1 << 7)) printk(BIOS_DEBUG, "SMB_WAK ");
if (gpe0_sts & (1 << 6)) printk(BIOS_DEBUG, "TCO_SCI ");
if (gpe0_sts & (1 << 5)) printk(BIOS_DEBUG, "AC97 ");
if (gpe0_sts & (1 << 4)) printk(BIOS_DEBUG, "USB2 ");
if (gpe0_sts & (1 << 3)) printk(BIOS_DEBUG, "USB1 ");
if (gpe0_sts & (1 << 2)) printk(BIOS_DEBUG, "HOT_PLUG ");
if (gpe0_sts & (1 << 0)) printk(BIOS_DEBUG, "THRM ");
printk(BIOS_DEBUG, "\n");
}
/**
* @brief read and clear ALT_GP_SMI_STS
* @return ALT_GP_SMI_STS register
*/
static u16 reset_alt_gp_smi_status(void)
{
u16 reg16;
reg16 = inl(pmbase + ALT_GP_SMI_STS);
/* set status bits are cleared by writing 1 to them */
outl(reg16, pmbase + ALT_GP_SMI_STS);
return reg16;
}
static void dump_alt_gp_smi_status(u16 alt_gp_smi_sts)
{
int i;
printk(BIOS_DEBUG, "ALT_GP_SMI_STS: ");
for (i=15; i<= 0; i--) {
if (alt_gp_smi_sts & (1 << i)) printk(BIOS_DEBUG, "GPI%d ", (i-16));
}
printk(BIOS_DEBUG, "\n");
}
/**
* @brief read and clear TCOx_STS
* @return TCOx_STS registers
*/
static u32 reset_tco_status(void)
{
u32 tcobase = pmbase + 0x60;
u32 reg32;
reg32 = inl(tcobase + 0x04);
/* set status bits are cleared by writing 1 to them */
outl(reg32 & ~(1<<18), tcobase + 0x04); // Don't clear BOOT_STS before SECOND_TO_STS
if (reg32 & (1 << 18))
outl(reg32 & (1<<18), tcobase + 0x04); // clear BOOT_STS
return reg32;
}
static void dump_tco_status(u32 tco_sts)
{
printk(BIOS_DEBUG, "TCO_STS: ");
if (tco_sts & (1 << 20)) printk(BIOS_DEBUG, "SMLINK_SLV ");
if (tco_sts & (1 << 18)) printk(BIOS_DEBUG, "BOOT ");
if (tco_sts & (1 << 17)) printk(BIOS_DEBUG, "SECOND_TO ");
if (tco_sts & (1 << 16)) printk(BIOS_DEBUG, "INTRD_DET ");
if (tco_sts & (1 << 12)) printk(BIOS_DEBUG, "DMISERR ");
if (tco_sts & (1 << 10)) printk(BIOS_DEBUG, "DMISMI ");
if (tco_sts & (1 << 9)) printk(BIOS_DEBUG, "DMISCI ");
if (tco_sts & (1 << 8)) printk(BIOS_DEBUG, "BIOSWR ");
if (tco_sts & (1 << 7)) printk(BIOS_DEBUG, "NEWCENTURY ");
if (tco_sts & (1 << 3)) printk(BIOS_DEBUG, "TIMEOUT ");
if (tco_sts & (1 << 2)) printk(BIOS_DEBUG, "TCO_INT ");
if (tco_sts & (1 << 1)) printk(BIOS_DEBUG, "SW_TCO ");
if (tco_sts & (1 << 0)) printk(BIOS_DEBUG, "NMI2SMI ");
printk(BIOS_DEBUG, "\n");
}
/**
* @brief Set the EOS bit
*/
static void smi_set_eos(void)
{
u8 reg8;
reg8 = inb(pmbase + SMI_EN);
reg8 |= EOS;
outb(reg8, pmbase + SMI_EN);
}
extern uint8_t smm_relocation_start, smm_relocation_end;
static void smm_relocate(void)
{
u32 smi_en;
u16 pm1_en;
u32 gpe0_en;
printk(BIOS_DEBUG, "Initializing SMM handler...");
pmbase = pci_read_config32(dev_find_slot(0, PCI_DEVFN(0x1f, 0)),
PMBASE) & 0xff80;
printk(BIOS_SPEW, " ... pmbase = 0x%04x\n", pmbase);
smi_en = inl(pmbase + SMI_EN);
if (smi_en & APMC_EN) {
printk(BIOS_INFO, "SMI# handler already enabled?\n");
return;
}
/* copy the SMM relocation code */
memcpy((void *)0x38000, &smm_relocation_start,
&smm_relocation_end - &smm_relocation_start);
printk(BIOS_DEBUG, "\n");
dump_smi_status(reset_smi_status());
dump_pm1_status(reset_pm1_status());
dump_gpe0_status(reset_gpe0_status());
dump_alt_gp_smi_status(reset_alt_gp_smi_status());
dump_tco_status(reset_tco_status());
/* Disable GPE0 PME_B0 */
gpe0_en = inl(pmbase + GPE0_EN);
gpe0_en &= ~PME_B0_EN;
outl(gpe0_en, pmbase + GPE0_EN);
pm1_en = 0;
pm1_en |= PWRBTN_EN;
pm1_en |= GBL_EN;
outw(pm1_en, pmbase + PM1_EN);
/* Enable SMI generation:
* - on TCO events
* - on APMC writes (io 0xb2)
* - on writes to SLP_EN (sleep states)
* - on writes to GBL_RLS (bios commands)
* No SMIs:
* - on microcontroller writes (io 0x62/0x66)
*/
smi_en = 0; /* reset SMI enables */
#if 0
smi_en |= LEGACY_USB2_EN | LEGACY_USB_EN;
#endif
smi_en |= TCO_EN;
smi_en |= APMC_EN;
#if DEBUG_PERIODIC_SMIS
/* Set DEBUG_PERIODIC_SMIS in pch.h to debug using
* periodic SMIs.
*/
smi_en |= PERIODIC_EN;
#endif
smi_en |= SLP_SMI_EN;
#if 0
smi_en |= BIOS_EN;
#endif
/* The following need to be on for SMIs to happen */
smi_en |= EOS | GBL_SMI_EN;
outl(smi_en, pmbase + SMI_EN);
/**
* There are several methods of raising a controlled SMI# via
* software, among them:
* - Writes to io 0xb2 (APMC)
* - Writes to the Local Apic ICR with Delivery mode SMI.
*
* Using the local apic is a bit more tricky. According to
* AMD Family 11 Processor BKDG no destination shorthand must be
* used.
* The whole SMM initialization is quite a bit hardware specific, so
* I'm not too worried about the better of the methods at the moment
*/
/* raise an SMI interrupt */
printk(BIOS_SPEW, " ... raise SMI#\n");
outb(0x00, 0xb2);
}
static int smm_handler_copied = 0;
static void smm_install(void)
{
device_t dev = dev_find_slot(0, PCI_DEVFN(0, 0));
u32 smm_base = 0xa0000;
struct ied_header ied = {
.signature = "INTEL RSVD",
.size = IED_SIZE,
.reserved = {0},
};
/* The first CPU running this gets to copy the SMM handler. But not all
* of them.
*/
if (smm_handler_copied)
return;
smm_handler_copied = 1;
/* enable the SMM memory window */
pci_write_config8(dev, SMRAM, D_OPEN | G_SMRAME | C_BASE_SEG);
#if CONFIG_SMM_TSEG
smm_base = pci_read_config32(dev, TSEG) & ~1;
#endif
/* copy the real SMM handler */
printk(BIOS_DEBUG, "Installing SMM handler to 0x%08x\n", smm_base);
memcpy((void *)smm_base, &_binary_smm_start, (size_t)&_binary_smm_size);
/* copy the IED header into place */
if (CONFIG_SMM_TSEG_SIZE > IED_SIZE) {
/* Top of TSEG region */
smm_base += CONFIG_SMM_TSEG_SIZE - IED_SIZE;
printk(BIOS_DEBUG, "Installing IED header to 0x%08x\n",
smm_base);
memcpy((void *)smm_base, &ied, sizeof(ied));
}
wbinvd();
/* close the SMM memory window and enable normal SMM */
pci_write_config8(dev, SMRAM, G_SMRAME | C_BASE_SEG);
}
void smm_init(void)
{
#if CONFIG_ELOG
/* Log events from chipset before clearing */
pch_log_state();
#endif
/* Put SMM code to 0xa0000 */
smm_install();
/* Put relocation code to 0x38000 and relocate SMBASE */
smm_relocate();
/* We're done. Make sure SMIs can happen! */
smi_set_eos();
}
void smm_lock(void)
{
/* LOCK the SMM memory window and enable normal SMM.
* After running this function, only a full reset can
* make the SMM registers writable again.
*/
printk(BIOS_DEBUG, "Locking SMM.\n");
pci_write_config8(dev_find_slot(0, PCI_DEVFN(0, 0)), SMRAM,
D_LCK | G_SMRAME | C_BASE_SEG);
}
void smm_setup_structures(void *gnvs, void *tcg, void *smi1)
{
/*
* Issue SMI to set the gnvs pointer in SMM.
* tcg and smi1 are unused.
*
* EAX = APM_CNT_GNVS_UPDATE
* EBX = gnvs pointer
* EDX = APM_CNT
*/
asm volatile (
"outb %%al, %%dx\n\t"
: /* ignore result */
: "a" (APM_CNT_GNVS_UPDATE),
"b" ((u32)gnvs),
"d" (APM_CNT)
);
}